Professional Documents
Culture Documents
CA907029E (Web) - Catálogo PowerTag
CA907029E (Web) - Catálogo PowerTag
CA907029E (Web) - Catálogo PowerTag
com
PowerTag Acti9 63 A
PB107143-32.eps
PowerTag is a wireless-communication energy sensor
PowerTag energy sensor is designed specifically for Energy Management, Load
Monitoring and Power Availability applications.
With its compact design and innovative concept, PowerTag fits directly on the
protective device and as a result has no impact on DIN rail occupancy and
switchboard size.
Voltage and current are therefore measured directly at the same point on the circuit
to be monitored, providing accurate measurement and relevant information such as
voltage loss.
A9MEM1572-26.eps
real-time measurements (U, V, I, P and PF) and metering values (Ea). Used together
with a concentrator to collect and process the data, it provides circuit monitoring and
diagnosis down to load level.
A9MEM1522
bb Wireless-communication technology simplifies switchboard wiring and
commissioning operations: no wiring is required for the PowerTag to communicate
with the concentrator.
A9MEM1572 bb System scalability: PowerTag energy sensor can be quickly and easily installed in
new or existing panels at any time.
bb Different designs of the PowerTag energy sensor are available to ensure it fits the
protective device on which it is mounted.
bb PowerTag Acti9 63 A is compatible with the Acti9 and Multi9 ranges as per the
selection guide CA908058.
Functions
PB120058-49.eps
A9XMWD100-28.eps
PB113286-11.eps
PB119988-32.eps
A9XMWD20-28.eps
A9XELC10
Mounting positions
Source Source
1 PowerTag Connected
Power flow “Top” downstream
Power flow
bb When breaker is OFF,
PowerTag is de-
energized. PowerTag
Connected sends Voltage loss alarm
upstream
before complete stop.
bb When breaker is OFF,
PowerTag remains
energized
PowerTag
Load Load 2 “Bottom”
Power flow
Connected energized
downstream
bb When breaker is OFF,
PowerTag is de-
energized. PowerTag
sends Voltage loss alarm PowerTag
Source before complete stop. Source
4 “Bottom”
Note:
bb In association with a contactor, a Variable Speed Drive or a motor starter: PowerTag can ONLY be installed UPSTREAM these
devices.
bb Some PowerTag can be installed either on the TOP or on the BOTTOM of the protective devices.
bb Check the possible mounting position as indicated in the “Catalog numbers” chapter.
Connection Features
Upstream 1 bb Energy management: consumption in kWh
bb Load monitoring: real-time measurements
4
Downstream 2 bb Energy management: consumption in kWh
Preferred installation to take full benefit of voltage loss in bb Load monitoring: real-time measurements
diagnosing the load 3 bb Power availability: voltage loss
Catalog numbers
A9MEM1520-11.eps
A9MEM1521-10.eps
PowerTag A9 M63
PowerTag for Acti9 and Multi9 Monoconnect offers: "Single-terminal" circuit breakers, RCDs
and switches with 18 mm pitch between phase and neutral, rating less than or equal to 63 A.
A9MEM1520 A9MEM1521
PowerTag A9 M63
Type Mounting Short description Cat. no.
A9MEM1540-10.eps
A9MEM1522-10.eps
A9MEM1542-10.eps
(1) Not compatible with Acti9 Smartlink SI D (A9XMWA20) and Acti9 Smartlink SI B (A9XMZA08)
A9MEM1541 A9MEM1542
A9MEM1561-19.eps
A9MEM1562-21.eps
A9MEM1563-21.eps
PowerTag A9 P63
PowerTag for Acti9 and Multi9 PhaseNeutral offers: "Single-terminal" circuit breakers, RCDs
and switches at pitch of 9 mm between phase and neutral, rating less than or equal to 63 A.
PowerTag A9 P63
A9MEM1561 A9MEM1562 A9MEM1563 Type Mounting Short description Cat. no.
1P+N Top PowerTag A9 P63 1PN T A9MEM1561
1P+N Bottom PowerTag A9 P63 1PN B A9MEM1562
A9MEM1571-22.eps
A9MEM1572-26.eps
A9MEM1571 A9MEM1572
A9MEM1560-17.eps
A9MEM1573-21.eps
PowerTag A9 F63
PowerTag Flex for other devices and specific installations, rating less than or equal to 63 A.
PowerTag A9 F63
Type Mounting Short description Cat. no.
A9MEM1560 A9MEM1573 1P+N Top or bottom PowerTag A9 F63 1PN A9MEM1560
3P Top or bottom PowerTag A9 F63 3P A9MEM1573 (2)
A9MEM1570-21.eps
(2) Not compatible with Acti9 PowerTag Link C (A9XELC10), Acti9 Smartlink SI D (A9XMWA20)
A9MEM1570
and Acti9 Smartlink SI B (A9XMZA08)
Technical characteristics
Main characteristics
Rated voltage Un Phase-to-neutral 230 V AC ± 20 %
Phase-to-phase 400 V AC ± 20 %
Phase-to-phase 230 V AC ± 20 %
(A9MEM1543)
Frequency 50/60 Hz
Maximum current Imax 63 A
Base current Ib 10 A
Saturation current 130 A
Maximum consumption 1P+N y 1 VA
3P/3P+N y 2 VA
Starting current Ist 40 mA
Additional characteristics
Operating temperature -25°C to +60°C
Storage temperature -40°C to +85°C
Overvoltage category As per IEC 61010-1 Cat. III
Measuring category As per IEC 61010-2-30 Cat. III
Pollution degree 3
Altitude y 2000 m
Degree of protection Device only IP20
IK 05
Radio-frequency communication
ISM band 2.4 GHz 2.4 GHz to 2.4835 GHz
Channels As per IEEE 802.15.4 11 to 26
Isotropic Radiated Power Equivalent (EIRP) 0 dBm
Maximum transmission time < 5 ms
Channel occupancy Messages sent every 5 seconds minimum
Characteristics of measuring functions
Function Performance category Measuring range
as per IEC 61557-12
Active power P 1 9 W to 63 kW
Active energy Ea 1 Total and partial 0 to
99999999.9 kWh
Current I 1 2 A to 63 A
Voltage U 0.5 Un ± 20 %
Power factor PFA 1 0 to 1
DB407926.eps
length Rigid Flexible Flexible with ferrule
DB123553.eps
DB112804.eps
DB122945.eps
DB112805.eps
DB123554.eps
DB123008.eps
18 mm 1.5 to 16 mm2 2 x 1.5 to 2.5 mm2 1.5 to 16 mm2 2 x 1.5 to 2.5 mm2 - -
AWG: 16...6 AWG: 16...14 AWG: 16...6 AWG: 16...14
18 mm - - - - 1.5 to 16 mm2 2 x 1.5 to 2.5 mm2
AWG: 16...6 AWG: 16...14
Dimensions (mm)
DB407922.eps
DB407924.eps
DB407923.eps
DB407925.eps
Ø 8.5 Ø 8.5 Ø 8.5 Ø 8.5
43 43 43 43
18 18 18
16.5 16.5 16.5 16.5
1000
18 35 53 71
Weight (g)
PowerTag A9 M63
Type
1P+wire 16.4
1P+N 17.5
3P 28
3P+N 35
DB428718.eps
Rigid Flexible Flexible with ferrule
DB123553.eps
DB112804.eps
DB112805.eps
DB123554.eps
DB123008.eps
DB122945.eps
1.5 to 16 mm2 2 x 1.5 to 2.5 mm2 1.5 to 16 mm2 2 x 1.5 to 2.5 mm2 - -
AWG: 16...6 AWG: 16...14 AWG: 16...6 AWG: 16...14
- - - - 1.5 to 16 mm2 2 x 1.5 to 2.5 mm2
AWG: 16...6 AWG: 16...14
bb Stripping length: respect the stripping length stated on the device the PowerTag is
associated with.
Dimensions (mm)
17 20 53.5 19.5
DB428605.eps
DB428606.eps
18
Ø 8.5 Ø 8.5
44.5 42.5
200 200
9 28
8 3
11 18
3 5 48 42
17.5
5
9
54
11
8
1P+N 3P+N
Weight (g)
PowerTag A9 P63
Type
1P+N 42
3P+N 71
DB428719.eps
Rigid Flexible Flexible with ferrule
DB123553.eps
DB112804.eps
DB112805.eps
DB123554.eps
DB123008.eps
DB122945.eps
1.5 to 16 mm2 2 x 1.5 to 2.5 mm2 1.5 to 16 mm2 2 x 1.5 to 2.5 mm2 - -
AWG: 16...6 AWG: 16...14 AWG: 16...6 AWG: 16...14
- - - - 1.5 to 16 mm2 2 x 1.5 to 2.5 mm2
AWG: 16...6 AWG: 16...14
bb Stripping length: respect the stripping length stated on the device the PowerTag is
associated with.
Dimensions (mm)
18 20 53.5 19.5 53.5 19.5
DB428603.eps
DB428604_2.eps
DB428604.eps
18 18
Ø 8.5 Ø 8.5 Ø 8.5
44.5 42.5 42.5
65 65 65
12 12
12
3 1 3 1 3 1
1P+N 3P 3P+N
Weight (g)
PowerTag A9 F63
Type
1P+N 46
3P 63
3P+N 65
l u t i o n s
Evo
g
in
sh
u bli
hi ep
efor
T
sp
age must be removed b