Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

CO N TAC T

www.evreel.com
info@evreel.com
Amsterdam, The Netherlands

A4-EV Reel brochure ENG.indd 1-2 29-05-19 09:21


E V CH A RG I N G STORING
CA B L E ISS U E S THE CABLE
Most EV drivers frequently charge their vehicle, not only

1
using their charger at home, but also at public charging Unplug the plug from the
points. This is where they need the portable charging cable, charging station and place the
which comes with the car. plug in the side of the EV Reel.
Charging often happens outside or in a parking place, where Use the ‘brake button’ above
the cable can get wet or dirty from lying on the ground. As the handle for this.
a result, your hands and clothes get dirty when handling
the cable after charging. Once charging is complete, the
cable needs to be stored in the trunk, where it takes up
unnecessary space, and slides around while driving. As a
result of such handling the cable often gets twisted and
tangled and the trunk of the vehicle gets dirty.

AVA I L A B L E S O LU T I O N S
2
Solutions currently available are limited to cable bags or
Hold the EV Reel at an angle
boxes, which do not offer a lot of benefits and do not solve
so the cable slides into the
any of the issues besides providing a way to store the cable
opening in the core and the
in the trunk. A downside is that it takes some effort to put
the cable in the bag, and this is probably the reason why CONNECTING cable can be rolled up. Roll
up the cable until you are
they are not used a lot and the cable ends up being thrown
in the trunk. THE VEHICLE close to the vehicle, and then
unplug the plug from the
vehicle. Then, roll up the cable
THE EV REEL completely until the plug is
caught by the clip on the top
The EV Reel is designed to handle the cable only by the
plugs during the process of connecting and disconnecting of the EV Reel.
the vehicle to and from the charging station. So, dirty

1
hands and clothes are no longer an issue. Using the EV Reel Take the plug from the clip on
prevents the cable from getting twisted and tangled, and the top of the EV Reel and
using the docking station the cable can be conveniently connect the plug to the vehicle.
stored, preventing it from sliding around in the trunk and
leaving dirt behind.

3
Place the EV Reel in its

2
Unwind the cable fully* and docking station in the trunk.
take the plug from the side of
the EV Reel.

SUMMARY
3
Connect the charging cable to
1 Dirty hands and clothes. the charging station. You are
2 Takes up space in the trunk. now ready to start charging.

3 Slides around while driving.

4 Gets twisted and tangled.


W AT C H T H E V I D E O AT
WWW.EVREEL.COM
*We recommend to always fully unwind the
5 Leaves dirt in the trunk. charging cable when charging!

A4-EV Reel brochure ENG.indd 3-4 29-05-19 09:22

You might also like