Professional Documents
Culture Documents
MAPEI Superplast
MAPEI Superplast
pla p e
pe S u
Ma
Integral waterproofing and
plasticizing admixture for concrete
and mortar
Ma
PRODUCT IDENTITY
Consistency: liquid
Colour: brown
action of the admixture is more effective • form release agents from the Mapeform
when added later. Eco range or DMA 1000, used for
stripping formwork from concrete;
Mapeplast Super is most effective when
cement and aggregate particles are already • fly ash for producing concrete with
wet, and least effective when the admixture artificial pozzolan.
is mixed with dry solids, especially if
porous, which partially adsorb it. It is DOSAGE
advisable to begin adding the admixture Dosage:
with an automatic dispenser when at least For waterproofing, dosage is 0.200 kg per
half the water required for the mix has 50 kg bag of cement.
been introduced into the mixer. The quantity of water required in a mix
having Mapeplast Super depends on the
COMPATIBILITY WITH OTHER type of fine and coarse aggregates used.
PRODUCTS In case engineered or fine sand is used
Mapeplast Super is compatible with other the quantity of water required will be less
products for producing special concrete, whereas if crushed sand or dust is used as
and especially with: fine aggregate more water will be required
in the mix. In such cases a starting w/c
• Mapeair air entraining agents for
ratio of 0.5 may be adopted to start with
producing concrete resistant to freeze-
in addition to Mapeplast Super. However
thaw cycles;
site trials are always recommended.
• Mapeplast SF, micro-silica powder Different dosages from those suggested
admixture for producing top quality must be previously tested through
concrete with strength, durability and concrete trials, in addition to consulting
impermeability; MAPEI Technical Services Department.