Netro Catalog 2019 V2

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 63

NETRO ELECTRONICS CATALOG V.2.

0
2019-2020
IGNITING CREATIVTY – LEARN BY DOING

www.netrozim.co.zw
HARARE 0778530166/0785288323|BULAWAYO 0785 383 725/0778060126| BINDURA 0771685334 | GWERU 0783 789 555
HARARE OFFICE: JOINA CITY, 12TH FLOOR, CYREX BUSINESS CENTRE | BULAWAYO OFFICE: H&S MALL, 2ND FLOOR, SHOP 25
NETRO ELECTRONICS ZIMBABWE® ™

Netro Electronics Inc. is a registered robotics, automation and electronics start-up in Zimbabwe. The
company was founded in June 2017 by Natasha Chitsike (Midlands State University, Zimbabwe), Eugene
Kudzai Jamu (Ashesi University, Ghana) and Tatenda Makuvatsine (Lander University, USA).
The focus of the business is to support students, experts and newbies with the necessary resources
and skills for them to excel in their electronics, engineering or computer science projects. As such Netro
Electronics supplies electronic components such as Arduino, PIC and Raspberry-Pi at very affordable prices.
These components give students in different technology and non-technology fields the possibility to merge
their programming (software) and electronics (hardware) knowledge to build practical solutions to society
problems.
The company has agents in Chinhoyi (CUT), Gweru (MSU), Gwanda (Polytechnic), Bulawayo (NUST and
Polytechnic), and Harare (HIT, UZ and Polytechnic). Our headquarters are in Harare (Joina City Mall, 12th
Floor) and we also have a shop in Bulawayo (H&S Mall, 2nd Floor).
Little Geeks Inc., a sister company of Netro focuses on promoting STEM education through practical
training of kids (4-18yrs) in electronics and robotics using a fun and project based approach.

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 1


NETRO ELECTRONICS ZIMBABWE® ™

A trailblazing organization in Zimbabwe, Little Geeks® imparts theoretical and


practical knowledge in robotics, electronics, programming and e-learning to children
between the ages of four (4) and eighteen (18). The company exists to give children a
head start in their science and technology education.
Little Geeks® works with willing institutions and individuals in order to educate and
empower children through the various products that we offer. Projects and courses
may be tailor made in order to cater for specific group requirements and to ensure
maximum utility. We believe in the power of synergy and that there is more to be
reaped from collective effort than from unnecessary solitude.

www.littlegeeks.co.zw
www.facebook.com/littlegeekszim
2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 2
NETRO ELECTRONICS ZIMBABWE® ™

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 3


NETRO ELECTRONICS ZIMBABWE® ™
Component/Part Image Description Brief Specs Price
Number (US$)
Arduino Uno R3 The Arduino Uno is a microcontroller board Operating Voltage: 5V
Mega 328p based on the ATmega328. It has 14 digital Input Recommended Voltage: 5V – 9V
input/output pins (of which 6 can be used (Max 12V)
as PWM outputs), 6 analog inputs, a 16 DC Current per I/O Pin 40 mA US$
MHz crystal oscillator, a USB connection, a DC Current for 3.3V Pin 50 mA
power jack, an ICSP header, and a reset Flash Memory 32 KB (ATmega328) 15.00
[Development boards button. length :68.6 mm
& Microcontrollers] width :53.4 mm
weight : 25g

Arduino Nano V3 The Arduino Nano is a small, complete, and 1. 20 digital input/output port RX and TX,
breadboard-friendly board based on the D2 ~ D13, A0 ~ A5
CH340 ATmega328 (Arduino Nano 3.x). It has more 2. 8 analog input port A0 ~ A7 US$
or less the same functionality of the 3. 6 PWM port, D3, D5, D6, D9, D10, D11 9.50
[Development boards Arduino Duemilanove, but in a different 4. Support serial download and ISP
& Microcontrollers] package. It lacks only a DC power jack, and download
works with a Mini-B USB cable instead of a 5. Support external 3.3V ~ 12V dc power
standard one. supply
Arduino Promini The pro mini is another board in the • ATmega328 running at 16MHz
Arduino family but small. Its small size is with external resonator (0.5%
best suitable for those geeks who need a tolerance)
[Development boards small board to implement their hardware • USB connection off board
& Microcontrollers] projects on but find the UNO or MEGA a • Supports auto-reset
large board to use. Robust and comes with • Max 150mA output US$
the same functionality with those of its • Over current protected 9.50
counter parts with few things making it • Reverse polarity protected
different and unique in its own way. • DC input 5V up to 12V
• On board Power and Status LEDs

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 4


NETRO ELECTRONICS ZIMBABWE® ™
Arduino AT Mega 2560 The board is a microcontroller board based Operating Voltage 5V
R3 on the ATmega2560-16AU .It has 54 digital Input Voltage(recommended) 7-12V
input/output pins (of which 14 can be used Digital I/O Pins 54(of which 14
[Development boards as PWM outputs), 16 analog inputs, 4 provide PWM output) US$
& Microcontrollers] UARTs (hardware serial ports), a 16 MHz Analog Input Pins 16
crystal oscillator, a USB connection, a power DC Current per I/O Pin 40mA 22.00
jack, an ICSP header, and a reset button. It Flash Memory 256KB
contains everything needed to support the DC Current for 3.3 V Pin 50 mA
microcontroller.

Raspberry Pi Zero Small computer board of the Raspberry Pi 1GHz, Single-core CPU.
family. It’s the last version on the list of 512MB RAM.
smallest PI boards but it sure does the trick Mini HDMI and USB On-The-Go ports.
for your computation projects. Micro USB power. US$
Comes with its charger making it easy for HAT-compatible 40-pin header.
[Development boards you to get up and running in no time. Composite video and reset headers. 70.00
& Microcontrollers] CSI camera connector.

Raspberry Pi 2 The Raspberry Pi 2 Model B is the second- SoC: Broadcom BCM2836 (CPU, GPU,
generation Raspberry Pi. It replaced the DSP, SDRAM)
original Raspberry Pi 1 Model B+ in CPU: 900 MHz quad-core ARM Cortex A7
[Development boards February 2015. (ARMv7 instruction set) US$
& Microcontrollers] GPU: Broadcom VideoCore IV @ 250 MHz
More GPU info: OpenGL ES 2.0 (24 70.00
Memory: 1 GB (shared with GPU)
USB ports: 4

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 5


NETRO ELECTRONICS ZIMBABWE® ™
Raspberry Pi 3B The low cost and 'plug and play' nature of Pi •Broadcom BCM2837 chipset running at
+ charger makes for a board that is accessible to all 1.2 GHz
and has numerous connectivity options. Pi •64-bit quad-core ARM Cortex-A53
is the perfect experimental tool, whether •802.11 b/g/n Wireless LAN US$
you want to use it as a desktop computer, •Bluetooth 4.1 (Classic & Low Energy)
[Development boards media centre, server or monitoring/security •Dual core Videocore IV® Multimedia co- 70.00
& Microcontrollers] device within your home. No limits. Linux- processor
based operating systems run on the Pi with •1 GB LPDDR2 memory
plenty of access to free software and •microSD card slot
downloads.
Raspberry 3B+ With an upgraded processor boasting CPU: 4× ARM Cortex-A53, 1.2GHz
impressive new packaging and improved RAM: 1GB LPDDR2 (900 MHz)
(+ charger) networking capabilities, the new Raspberry Networking: 10/100 Ethernet, 2.4GHz
Pi 3B+ sits head and shoulders above its 802.11n wireless US$
predecessor the Raspberry Pi 3 B. Bluetooth: BT 4.1 Classic, Low Energy
Storage: microSD 80.00
GPIO: 40-pin header, populated
Ports: HDMI, 3.5mm analogue audio-
video jack, 4× USB 2.0, Ethernet, Camera
Serial Interface (CSI), Display Serial
Interface (DSI)
Arduino Ethernet This Ethernet Shield gives you an easy way •Operating voltage 5V (supplied from the
Shield to get your Arduino Online. It is directly Arduino Board)
supported by For Arduino official Ethernet • Ethernet Controller: W5100 with
Library. It adds a micro-SD card slot, which internal 16K buffer US$
[Development boards can be used to store files for serving over •Connection speed: 10/100Mb
& Microcontrollers] the network. It is compatible with Arduino • Connection with Arduino on SPI port 17.50
Duemilanove (168 or 328), Uno as well as
Mega (1280/2560) and can be accessed
using the SD library. It supports up to four
simultaneous socket connections.

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 6


NETRO ELECTRONICS ZIMBABWE® ™
Speech/Voice Instruct your Arduino using this 1.Voltage: 4.5-5.5V
Recognition Module voice/speech recognition module. Literally 2.Current: <40mA
speak to your circuit. 3.Digital Interface: 5V TTL level UART
interface US$
[Wireless & 4.Analog Interface: 3.5mm mono-channel
Communication] microphone connector + microphone pin 50.00
interface
5.Size: 30mm x 47.5mm

Xbee Antenna Shield Xbee module is a ZigBee wireless module 3.3V @ 40mA
technology, such as through inter serial 250kbps Max data rate
Zigbee/Xbee devices to communicate with the 2mW output (+ 3dBm) US$
microcontroller , can very quickly achieve 400ft (120m) range 65.00
the purpose of the device is connected to a Built-in antenna
[Wireless & ZigBee network. Fully FCC certified
Communication] 6 10-bit ADC input pins
8 digital IO pins ,128-bit encryption

Arduino Mini Kit Best kit for Arduino beginners, contains Arduino Uno 328 P
simplest Arduino components and Bread board (400/830 holes)
microcontroller (UNO 328P) Resistors x 5 values
(Netro Set 1) Female to female cables x 10 US$
Male to male cables x 20
LEDs x 15 25.00
Push Buttons and Caps
[KITS] Light Dependant Resistors (LDRs) x 2
Battery Jack

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 7


NETRO ELECTRONICS ZIMBABWE® ™
Arduino Starter Kit Arduino kit with everything an Everything in the above (Netro set 1) plus
(Netro Set 2) intermediate/absolute beginner needs. This the following:
kit adds more sensors and actuators to the
Mini Kit above. LCD 16x2 without I2C US$
Remote control, LED Matrix
Seven segment LED display 50.00
[KITS] Infrared receiver and transmitter
Servo, Battery Holder
Piezo Buzzers x 2
LM 35 Temperature sensor

Sensors Kit DIY Sensors compatible with Arduino, PIC or Ultrasonic sensor
Raspberry Pi. Sensors for temperature, rain Gas sensor (Mq2/3/7)
(Netro Set 3) water level, soil moisture, gas Rain water sensor
Soil Moisture Sensor US$
Temperature sensor (Lm35)
[KITS] Humidity and Temperature sensor 30.00

Basic kit for electronics, simplest kit for Bread board (400/830 holes)
Electronics absolute electronics beginners Resistors x 5 values
Components Set Female to female cables x 10 US$
(Netro Set 0) Male to male cables x 20 10.00
LEDs x 15
Push Buttons and Caps
Light Dependant Resistors (LDRs) x 2
[KITS] Battery Jack

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 8


NETRO ELECTRONICS ZIMBABWE® ™
Robot Kit 1 Easy DIY 2-wheel robot kit programmable Arduino UNO R3 , Car chassis, Car Wheels
with any Arduino development board. X 3, Servo motor,
Driven by two motors. Two wheels in the Ultrasonic sensor,
(Netro Set 4) rear and one in front. Can be customised to DC Gear Motor x 2, US$
2 Wheel Drive be a detector, obstacle avoidance, line Fasteners (black acrylic) X 4,
follower etc. The mechanical structure is Battery box , Several screw nuts, 60.00
simple and very easy to assemble. V5 shield X1,
FPV X 1, Motor driver L298N X1
[Robot Kits]

Robot Kit 3 Simple DIY 4-wheel drive. With 4 motors, 4 X Gear motor + 4 X Tyre
this robot is powerful and quick. Comes 1 X L298N motor driver board
(Netro Set 6) with an ultrasonic sensor and can also be 1 X Uno r3 Board
customised to fit user’s application. 1 X sensor extension board V5 US$
4 Wheel Drive – Lite 1 X holder,
1 X SG90 servo 70.00
1 X ultrasonic sensor module
1 X40Pin DuPont line

Robot Kit 2 Simple DIY Remote and Bluetooth 4 X Gear motor + 4 X Tyre
controlled 4-wheel drive. With 4 motors, 1 X L298N motor driver board
(Netro Set 5) this robot is powerful and quick. Comes 1 X Uno r3 Board
4 Wheel Drive with a variety of sensors and can also be 1 X sensor extension board V5 US$
customised to fit user’s application. 1 X holder, 1 X SG90 servo
1 X ultrasonic sensor module 100
[Robot Kits] 3 X TCRT5000 tracing module
1 X infrared receiver module, 1 X Remote
1 X40Pin DuPont line, HC- 06/05
Bluetooth Module + More

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 9


NETRO ELECTRONICS ZIMBABWE® ™
4WD Robot Chassis

(Pair) Acrylic 4WD Robot Chassis 2 x Robot Chassis US$


10.00
[Robot Kits]

Wheels + Motors
Rubber Wheels + Geared Motors 4 Pcs

(Pair) US$
[Robot Kits] 15.00

Bread Board This is where prototype connections can be 1 x Breadboard


(800 holes) made with jumpers.
800 connection holes US$
4.00
[Basic Components]

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 10


NETRO ELECTRONICS ZIMBABWE® ™
Small Breadboard Its small size makes connecting your 1x Breadboard
components for rapid prototyping relatively
(400 holes) easy. Go on give it a test and enjoy
prototyping on this small board and show US$
[Basic Components] case your projects to friends 400 holes
3.00

Tiny Bread Board These tiny Arduino prototyping boards Comes in different colors
makes connecting your components for
(200 holes) rapid prototyping relatively easy. Go on give 200 holes
it a test and enjoy prototyping on this small US$
[Basic Components] board and show case your arduino projects
to friends 2.00

Transparent Acrylic Perfect for those who enjoy neat 1 Piece x Transparent Acrylic Plate
prototyping and have their projects
Mounting Plate Board
presented on a nice board
/Experimental Platform
US$
for Arduino
7.00
[Basic Components]

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 11


NETRO ELECTRONICS ZIMBABWE® ™
Breadboard Holder Are you finding it difficult to place your Color may differ
breadboard after you plug in all your Comes with screws to mount your board
connectors?..Worry not, Netro has this nice firmly
for Arduino UNO, breadboard holder for your Arduino US$
MEGA2560 and projects, create that neat setup and enjoy
Raspberry-Pi-3/2 building up your project 25.00

[Basic Components]

Acrylic Case /Enclosure Protects your Arduino Uno from static 1 x installation drawing
electricity, drops and weather and makes it 1 x R3 Acrylic Case Enclosure
For Arduino Uno more elegant.
US$
[Development boards 5.00
& Microcontrollers]

Acrylic Case /Enclosure Protects your Arduino Mega from static 1 x installation drawing
electricity, drops and weather and makes it 1 x R3 Acrylic Case Enclosure
more elegant.
For Arduino Mega US$
6.00

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 12


NETRO ELECTRONICS ZIMBABWE® ™
Raspberry Pi Protects your Raspberry Pi from static
electricity, drops and weather and makes it
Case/Enclosure more elegant. 1 x installation drawing
1 x R3 Acrylic Case Enclosure US$
[Development boards 8.00
& Microcontrollers]

LCD Liquid Crystal Display, 16 Characters by 2 Can display 2-lines X 16-characters.


Lines, (16 columns x 2 rows). Best for simple 1 x LCD
16x2 or 1602 projects. Does not have I2C. Arduino Voltage: 5V DC. US$
Library LCD Codes available by default. Module dimension: 80mm x 35mm x 5.00
Without I2C Compatible with Raspberry Pi, Arduino and 11mm.
[Display & Interaction] PIC. Viewing area size: 64.5mm x 16mm

LCD Easy to connect Arduino LCD with only 4 Can display 2-lines X 16-characters.
connections to the board enabled by the 1 x LCD
I2C. Display 2 lines x 16 characters 1 X I2C US$
Voltage: 5V DC. 7.00
16x 2 or 1602 Module dimension: 80mm x 35mm x
11mm.
With I2C Viewing area size: 64.5mm x 16mm
[Display & Interaction]

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 13


NETRO ELECTRONICS ZIMBABWE® ™
LCD Big Liquid Crystal Display, 16 Characters by Can display 4-lines X 16-characters.
4 Lines, (16 columns x 4 rows). Best for 1 x LCD
multiple information display. Does not have Voltage: 5V DC.
16 x 4 or 1604 I2C. Arduino Library LCD Codes available by US$
default. Compatible with Raspberry Pi,
Without I2C Arduino and PIC. 16.00
[Display & Interaction]

LCD This module is used to reduce the number 1. Size: 41.5mm (length) * 19mm (width)
of connections typically up to 7 to 9+ wires * 15.3mm (H)
I2C connected to the Arduino board together 2. Weight: 5g
with some resistors to a simple 4 wire 3.PCB Color: Black US$
connection. Libraries available online. 4. Supply voltage: 2.5-6V
[Display & Interaction] 5. Support I2C protocol 3.50

LCD – TFT 2.4" diagonal LCD TFT display


Touch and color TFT screen. Display Images 240x320 resolution, 18-bit (262,000)
or graphs easily. No wiring, no soldering! colour 5V compatible! Use with 3.3V or
2.4” Colour, Arduino Simply plug it in and load up our library - 5V logic US$
UNO you'll have it running in under 10 minutes! Onboard 3.3V 300mA LDO regulator
Works best with any classic UNO. Needs 16.50
[Display & Interaction] modifications to work with AtMega 2560.

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 14


NETRO ELECTRONICS ZIMBABWE® ™
Pressure sensor Pressure sensor, for general applications. Measure pressure range of 580 PSIG,
Sphygmomanometer 40KPaG
Work power supply 5 VDC, US$
MPS20N0040D Input impedance of 4 - 6 KΩ 10.00
The output impedance of 4 - 6 KΩ
Operating temperature -40 - 85 ° C -40 ° F
- +185 ° F
[Sensors] Storage Temperature -40 - 125 ° C -40 °
the F - +257 ° F
Ultrasonic Sensor Ultrasonic sensor, used to measure Working Voltage: 5V(DC)
distance of the closest object in its way. It Static current: Less than 2mA.
HC -SR04 sends sound signal and measures the time Output signal: Electric frequency signal, US$
is takes for the sound to hit an obstacle and high level 5V, low level 0V. 7.00
[Sensors] bounce back. This time will be used to Sensor angle: Not more than 15 degrees.
compute the distance of closest object. Detection distance: 2cm - 450cm.
High precision: Up to 0.3cm

Soil Moisture Sensor/ The moisture sensor can be used to detect 1.adjustable sensitivity ( shown in blue
Hygrometer the moisture of the soil, when the soil is digital potentiometer adjustment )
dry, the module outputs a high level, 2. Operating Voltage 3.3V-5V
whereas the output low. Using this sensor 5.Module Dual Output mode , a simple
make an automatic watering system, so digital output , analog output more
[Sensors] that your garden plants need people to accurate. US$
manage 7. small PCB board size : 3cm * 1.6cm 6.00

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 15


NETRO ELECTRONICS ZIMBABWE® ™
Fluid flow sensor/ Measures the rate of fluid flow, can thus be G1/2
Water flow sensor used to calculate amount of fluid that has High amplitude: ≥ 4.6V
flown. Useful for fluid control systems e.g. Low amplitude: ≤ 0.5V
irrigation. Electric strength: 1250V/min US$
[Sensors] Insulation resistance: ≥ 100MΩ
Hydrostatic pressure testing: ≤ 2.0Mpa 15.00

Motion Sensor Detects motion, applications include Dimension: 3.2cm x 2.4cm x 1.8cm
HC SR501 security and automation. Infrared sensor (approx)
with control circuit board, the sensitivity Working Voltage Range: DC 4.5V- 20V
and holding time can be adjusted. Current drain:<60uA US$
Voltage Output: High/Low level
signal:3.3V TTL output 7.00
[Sensors] Detection distance: 3--7M (can be
adjusted)
Detection range: <140°)

Infrared Transmitter This is infrared receiver module can receive - Operating voltage: 4.5 - 5.5VDC
and Receiver Module the modulated infrared signal of 38KHz that - Operating Current: 50mA (max)
is sent by the IR transmitter module and - Emission angle: 45 degrees US$
demodulate it into logic level, ie, when it - SIG pin current: High level 0.4mA (max), 4.00
[Sensors] gets the modulated infrared signal, it low level 1.4mA (max)
outputs one negative pulse and returns to
normalcy (High level). The infrared receiver
module and transmitter module can
[Each]
complete the infrared remote control with
the codec program.

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 16


NETRO ELECTRONICS ZIMBABWE® ™
Rain Water Level Water Sensor water level sensor is an easy- 1. Operating voltage: DC3-5V
Sensor to-use, cost-effective high level/drop 2. Operating current: < 20mA
recognition sensor, which is obtained by 3. Sensor Type: Analog
having a series of parallel wires exposed 4. Detection Area: 40mmx16mm US$
[Sensors] traces measured droplets/water volume in 5. Operating temperature:10°-30°
order to determine the water level. Easy to 6. Humidity: 10% -90% non-condensing 5.00
complete water to analog signal conversion
and output analog values can be directly
read development board of for Arduino to
achieve the level alarm effect.
Temperature and The DHT11 is a basic, ultra low-cost digital 1.Humidity measuring range:
humidity sensor temperature and humidity sensor. It uses a 20%~90%RH(0~50degree (temperature
capacitive humidity sensor and a thermistor compensation).
DHT11 to measure the surrounding air, and spits 2.Temperature measuring range: US$
out a digital signal on the data pin (no 0~+50degree.
[Sensors] analog input pins needed). Its fairly simple 3.Humidity measurement accuracy: 8.00
to use, but requires careful timing to grab ±5.0%RH.
data. The only real downside of this sensor 4.Temperature measurement accuracy:
is you can only get new data from it once ±2.0degree.
every 2 seconds, so when using our library, 5.response time: <5s.
sensor readings can be up to 2 seconds old 6.Size:23X12X5.5mm
DHT22 The DHT22 temperature and humidity 3.3 – 6 V Input
sensor is a low-cost high precision humidity 1-1.5 mA measuring current
and temperature sensor with a single wire 40-50 uA standby current
digital interface, meaning many of these Humidity from 0 – 100 % RH US$
sensors can be strung (daisy chained) -40 – 80 degrees C temperature range
together from one digital pin.The sensor is +- 2 % RH accuracy 9.00
[Sensors] pre-calibrated and doesn’t require extra +- 0.5 degrees C
components so you can get right to 20 m max wire length
measuring relative humidity and
temperature.

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 17


NETRO ELECTRONICS ZIMBABWE® ™
Gas Sensor The conductivity of the sensor increases Working voltage: for DC 5V
with concentration of combustible gases in Detection of gas: combustible gases,
Mq 2 air. Using a simple circuit to convert the fumes
change in conductivity of the gas Detectable concentration :300- US$
(Hydrogen/ concentration corresponding to the output 10000ppm (flammable gas)
Propane/ signa,. MQ-2 gas sensor can detect gases Input voltage : DC5V Power consumption 9.00
Smoke Detector/ such propane, hydrogen natural gas and ( current ): 150mA
Combustible Gas) other flammable vapours.

[Sensors]
Gas Sensor Using high and low temperature cycle test 1,Module size: 32(L)× 20(W)× 22(H)
low temperature heat (1.5 V) carbon 2,Input voltage: DC5V.
Mq7 monoxide, sensor conductivity increases 3,Power dissipation: 150mA.
with increasing concentration of carbon 4,DO output: 0.1-5V. US$
(carbon monoxide) monoxide gas in the air, high temperature 5,AO output: 0.1-0.3V.
washing the low temperature heat (5.0 V) 6,Detectable concentration: 10- 9.00
[Sensors] stray gas adsorption. The sensor can detect 1000ppmCO.
a variety of gases containing carbon
monoxide. Mq7 is a low-cost sensor
suitable for many applications
Gas Sensor This alcohol sensor is suitable for detecting 5V operation
alcohol concentration on your breath, just Simple to use
Mq3 like your common breathalyzer. It has a LEDs for output and power
high sensitivity and fast response time. Output sensitivity adjustable US$
Ethanol/Alcohol Sensor provides an analog resistive output Analog output 0V to 5V
based on alcohol concentration. The drive Digital output 0V or 5V 9.00
[Sensors] circuit is very simple, all it needs is one
resistor. A simple interface could be a 0-
3.3V ADC.

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 18


NETRO ELECTRONICS ZIMBABWE® ™
Gas Sensor The MQ5 Gas Sensor module is useful for Working voltage: 5V
gas leakage detecting. It can detect LPG, i- Working Current: 150mA
Mq5 butane, methane, alcohol, Hydrogen, DO: TTL output
smoke and so on. The sensitivity can be AO: Analog output, it will be higher with
Methane/ LPG,/Natural adjusted using the on-board potentiometer, more such gas.
Gas/Town Gas and you'd use this sensor by reading the Preheat time: Over 20s US$
analog pin to which it is connected. Please 9.00
[Sensors] use these sensors only in controlled
experiments! Combustible gases and fumes
are very dangerous! Here are details for
some MQ gas sensor.
Gas Sensor This is a simple-to-use liquefied petroleum Voltage: 5V
gas (LPG) sensor, suitable for sensing LPG Detecting concentration :
Mq6 (composed of mostly propane and butane) 200-10000ppm LPG
concentrations in the air. The MQ-6 can iso-butane US$
LPG Propane/Butane detect gas concentrations anywhere from propane
200 to 10000ppm. LNG 9.00
[Sensors] Analog and Digital Output
Digital Out is High or Low based on a
adjustable preset threshold

Gas Sensor Measures CO2 concentrations. Net Weight: 16g; Package Content: 1 x
Carbon Dioxide Sensor Module
Model: MG811 Voltage Probe; Working US$
MG811 Voltage: DC 6V 70.00
Chip: LM393; Detect Density Range: 0-
Carbon Dioxide/C02 10000ppm
PCB
[Sensors]

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 19


NETRO ELECTRONICS ZIMBABWE® ™
Voltage sensor Voltage sensor used for general purposes. Voltage input range : DC0-25 V
This module is based on principle of Voltage detection range : DC0.02445 V-25
resistive voltage divider design, can make V US$
the red terminal connector input voltage to Voltage analog resolution : 0.00489V 7.00
[Sensors] 5 times smaller. Output interface : "+ " connected 5/3.3V,
"-" connected GND, "s" connected AD
pins
DC input interface : positive with VCC,
negative with GND
Current sensor Current sensor used for general purposes 5v power supply, Onboard power light
indicator
Module can measure +5 or -5 current,
ACS712 corresponding to the analog output of US$
185 mv/A
When no current through the test, the 8.00
[Sensors] output voltage is the VCC/ 2
Size of the PCB board : 31 x13 (mm) (mm)

PH Sensor Water PH sensor, measures the quality of Heating voltage: 5 ± 0.2V (AC · DC)
water/solution based. A pH meter is a Working current: 5-10mA
scientific instrument that measures the Detectable range: PH0-14
hydrogen-ion activity in water-based Detection Temperature: 0-80 ℃ US$
solutions, indicating its acidity or alkalinity Response time: ≤5S
[Sensors] expressed as pH. Component Power: ≤0.5W 75.00
Working temperature: -10 ~ 50 ℃
(nominal temperature 20 ℃)
Humidity: 95% RH (nominal- 65% RH)
Output: analog voltage signal output
With 4pcs M3 Mounting Holes

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 20


NETRO ELECTRONICS ZIMBABWE® ™
Turbidity sensor Turbidity sensor makes use of optical 1, working voltage: DC 5V
principles, through the transmission and 2, working current: 30mA (MAX)
scattering in liquid solution rate 3, the response time: <500ms
comprehensive judge turbidity conditions 4, insulation resistance: 100M Ω min US$
[Sensors] arise. Turbidity has gradual changes, usually 5, output one: analog output 0-4.5V
detected in the dynamic environment. 6, output two: high / low level signal 55.00
High level: 5V Low level: 0V
7, the operating temperature: -30 - 80

Temperature The LM35 series are precision integrated- Calibrated Directly in Celsius (Centigrade)
Sensor circuit temperature devices with an output Rated for Full −55°C to 150°C
voltage linearly-proportional to the Suitable for Remote Applications
LM35 Centigrade temperature. The LM35 device Low-Cost Due to Wafer-Level Trimming US$
has an advantage over linear temperature Operates from 4 V to 30 V
sensors calibrated in Kelvin, as the user is Less than 60-µA Current Drain 3.00
not required to subtract a large constant Low Self-Heating, 0.08°C in Still Air
[Sensors] voltage from the output to obtain
convenient Centigrade scaling. The LM35
device does not require any external
calibration or trimming.
IR Infrared Line This IR reflective sensor utilizes a TCRT5000 Supply Voltage: 3.3V~5V
Follower to detect color and distance. It emits IR and Detect distance: 1mm-8mm
Sensor then detects if it receives the echo. This Digital Outputs HIGH when objects US$
sensor is often used in line following robots, detected 5.00
TCRT5000 auto data logging on utility meters, because On-board indicator LED to show the
this module can sense if a surface is white results
[Sensors] or black. On-board potentiometer to adjust the
sensitivity
On-board LM393 chip

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 21


NETRO ELECTRONICS ZIMBABWE® ™
IR Infrared The sensor module is adaptable to ambient Working Voltage: DC 3.3V-5V
Obstacle light, having a pair of infrared emitting and Working Current: ≥20mA
Avoidance receiving tubes, transmitting tubes emit Working Temperature: -10℃—+50℃ US$
infrared certain frequency, when the Detection Distance: 2-40cm 5.00
Sensor-Module direction of an obstacle is detected Output Signal: TTL voltage
(reflection surface), the infrared reflected is Accommodation Mode: Multi-circle
received by the reception tube. resistance regulation
[Sensors] Effective Angle: 35°

Light Emitting Diodes Red, green, clear and blue LEDs. Used for 3 x 5 mm
(LEDs) general applications Should be connected with a resistor in
series in order to prevent damage US$
0.20
[Basic Components]

Resistors A resistor is a passive two-terminal 1/4 W


electrical component that implements
[Basic Components] electrical resistance as a circuit element. US$
Used for general purposes. 0.10

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 22


NETRO ELECTRONICS ZIMBABWE® ™
Variable Resistor A variable resistor is a potentiometer with 1k ohm 2k ohm 5k ohm
only two connecting wires instead of three.
However, although the actual component is 10k ohm 20k ohm 50k ohm US$
the same, it does a very different job. The 1.00
pot allows us to control the potential 100k ohm 200k ohm 500K ohm
[Basic Components] passed through a circuit.
1M ohm

Potentiometer A variable resistor is a potentiometer with 1k ohm 2k ohm 5k ohm


only two connecting wires instead of three.
However, although the actual component is 10k ohm 20k ohm 50k ohm
the same, it does a very different job. The US$
[Basic Components] pot allows us to control the potential 100k ohm 200k ohm 500K ohm
passed through a circuit. 1.00
1M ohm

Light Dependant An LDR is a component that has a (variable) Diameter : 5mm


Resistor resistance that changes with the light No. of Pins : 2
intensity that falls upon it. This allows them Type of Mounting : PCB Through Hole US$
LDR to be used in light sensing circuits. Maximum Operating Temperature : 1.00
+800C (Approx.)
Dark resistance:1-20M ohm
[Basic Components]

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 23


NETRO ELECTRONICS ZIMBABWE® ™
Push Button/Contact The pushbutton is a component that Contact Switch
Switch connects two points in a circuit when you Cap -Assorted colours
press it. The example turns on an LED when
you press the button. We connect three
wires to the Arduino board. The first goes
[Basic Components] from one leg of the pushbutton through a US$
pull-up resistor (here 2.2 KOhms) to the 5 1.00
volt supply. The second goes from the
corresponding leg of the pushbutton to
ground. The third connects to a digital i/o
pin (here pin 7) which reads the button's
state.
Connectors/Male to Connection wires with breadboard. For Quantity - 20
male cables general purpose
US$
1.00
[Basic Components]

Connectors/Male to Connection wires with breadboard. For Quantity - 10


female general purpose

US$
[Basic Components] 1.50

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 24


NETRO ELECTRONICS ZIMBABWE® ™
Buck Boost Conveter A buck converter (step-down converter) is a Input: 3-35V
DC-to-DC power converter which steps Output: 1.25V-30V
(blue or red board) down voltage (while stepping up current) Biggest current 2A US$
from its input (supply) to its output (load). Conversion efficiency 92% 7.00
XL6009 Frequency 50KHz
Output ripple 40mV
[Actuators Temperature: -40° to +85°
& Power]

DC-DC Buckboost 1.XL6009 Step-up Power Module uses Input voltage:4.2-32V


Converter XL6009 as main control chip to realize Output voltage:5-52V
broader scope of application about Maximum input current:4A
XL6009 with digit boosting. Transfer efficiency:94% US$
display 2.It shows the adjusted results intuitively Output ripple:50mV
with the digital tube. Operating temperature:-40℃~+85℃ 12.00
3.There is no need to use the multimeter,
which will be more convenient.
4.Equipped with the Schottky diode,you
need not to be worried about wrong
operation.
Connectors/Female to Connection wires with breadboard. For Quantity - 10
female general purpose
US$
1.50
[Basic Components]

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 25


NETRO ELECTRONICS ZIMBABWE® ™
Arduino USB Cable Connecting cable for Arduino to your PC for Works for Arduino Uno, Mega
programming, uploading your code to the
board US$
3.00

RFID Set Radio-frequency identification (RFID) uses Current :13-26mA / DC 3.3V


electromagnetic fields to automatically Idle Current :10-13mA / DC 3.3V
identify and track tags attached to objects. Sleep current: <80uA
The tags contain electronically stored Peak current: <30mA US$
information. Passive tags collect energy Operating Frequency: 13.56MHz
from a nearby RFID reader's interrogating Supported card types: S50, S70, 10.00
[Display & Interaction] radio waves. UltraLight, Pro, Desfire
1 X Curved row pin 1, RFID-RC522 module a; 2, a standard
S50 blank card; 3, S50 profiled a card 1 X
Straight row pin

RFID Tag RFID tag 13MHz rfid tags

Used for storing information which can be US$


[Display & Interaction] read and written using the RFID card and 2.00
RFID reader

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 26


NETRO ELECTRONICS ZIMBABWE® ™
RFID Reader/Writer RFID [Radio Frequency Identification FIFO buffer handles 64 byte send and
Device] is a cool RF technology made receive
perfectly for a wide range of projects. This Flexible interrupt modes
component at Netro gives you the power to Hard reset with low power function US$
[Display & Interaction] write any data you want to the cards and or Power-down by software mode
read from them, so go ahead try it and Programmable timer 7.00
show us what you can do with this Internal oscillator for connection to 27.12
MHz quartz crystal
2.5 V to 3.3 V power supply
CRC coprocessor
Programmable I/O p
RFID Contactless RFID card – with this blank card and the Operating temperature: -20 ℃ ~ 50 ℃
White Card *RFID Reader / Writer at Netro (humidity 90%)
You can pre write any data you want to this Operating frequency: 13.56MHZ
blank card just like you do to blank CDs. Communication speed: 106 Kbps US$
The RFID Contactless Cards are finely
[Display & Interaction] laminated blank card、plain white、no Read and write distance: <10 cm (depend 3.00
marking with no any word or label. on the reader)
Waterproof and dustproof
Size: 85.5mm×54mm×0.84mm
Accelerometer/Tilt Do you need to be able to sense the On-board ADXL345 digital output
sensor orientation of certain object, its x, y, z (supports I2C/SPI), low power
values or to see if it has been moved or consumption, compact acceleration.
ADXL 345 tilted? This is the right board for you, US$
compatible with Arduino board. The
[Display & Interaction] ADXL345 is a small, thin, low power, 3-axis sensor 5.00
accelerometer with high resolution (13-bit) On-board RT9161 power chip, lower
measurement at up to ±16 g. pressure drop than 1117
Pin Pitch: 2.54 mm
PCB Size: 28 x 14 mm

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 27


NETRO ELECTRONICS ZIMBABWE® ™
Keypad Keypad used for general purpose – input for Contact resistance of 500
information. Keys include 0-9, *, # and A-D Insulation resistance 100M
4x4 Membrane Key Operating Force 150-200N US$
Rebound time 1 (ms) 2.00
Life of 100 million (times)
Operating Temperature 60
[Display & Interaction] The electronic characteristics:
Circuit Rating: 35V (DC), 100mA, 1W
Contact resistance: 10Ω ~ 500Ω
Keypad A 4 * 3 keyboard Pad Size: 68.9 x 76 x 0.8mm
0 – 9 with [ * and # ] Cable length: 85mm (including connector)
4x3 Membrane Perfect for your microcontroller project Connector: dupont 7 pins, 0.1 inch
(2.54mm) Pitch US$
Mount style: Self-Adherence
Max. circuit rating: 35VDC, 100mA 2.00
Insulation spec.: 100M Ohm, 100V
[Display & Interaction] Dielectric withstand: 250Vrms (60Hz,
1min)
Contact bounce: ≤5ms
Life expectancy: 1 million closures
Keypad Are you tired of stick keys or you just enjoy Capacitive touch
everything touch? Soldered female connections for easy
Touch Shield You will love this shield at Netro connections
Capacitive Touchpad US$
3x3 Key pad
7.50
[Display & Interaction]

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 28


NETRO ELECTRONICS ZIMBABWE® ™
Brushless Fan Cooling Fan for general purposes Dimension:
80*80*10mm/3.15*3.15*0.39inch
12V (Approx.)
Cable Length: 230mm/9.06inch (Approx.) US$
Connector Type: 2 Pins(ph-2.54)
[Actuators & Power] Voltage: DC 12V 5.00
Rated Current: 0.15A
Bearing Type: Sleeve
Speed: 2600RPM±10%
Servo Motor Servo motors are great devices that can Dimension: 22 x 11.5x 22.5mm
turn to a specified position. They have a Net Weight: 9 grams
SG90 servo arm that can turn 180 degrees. Operating speed: 0.12second/ 60degree (
Arduino, we can command servo to go to a 4.8V no load) US$
specified position and it will go there. As Stall Torque (4.8V): 17.5oz /in (1kg/cm)
simple as that! Servo motors were first used Temperature range: -30 to +60 8.50
in the Remote Control (RC) world, usually to Dead band width: 7usec
control the steering of RC cars or the flaps Operating voltage: 3.0V~7.2V
[Actuators & Power] on a RC plane. With time, they found their Fit for ALL kind of R/C Toys
uses in robotics, automation, and of course, Connector wire length 150mm
the Arduino world.
Servo Motor Servo motor with metal gear, same function Stall Torque: 13 kg / cm (4.8V), 15 kg / cm
as SG90 but with higher torque (6.0V).
MG90S Operating Speed: 0.17 sec/60¡ã (4.8V no US$
load), 0.14 sec / 60¡ã (6.0V no load) 9.50
Operating voltage: 4.8 - 7.2V.
Dimension: 40mm x 19mm x 43mm.
[Actuators & Power]

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 29


NETRO ELECTRONICS ZIMBABWE® ™
Servo Motor This is essentially an upgraded version of Weight: 55g
the famous towerpro MG995 servo. It now Voltage: 4.8v / 6v
MG996R has a redesigned PCB and IC controll system Speed: 0.20sec/60deg (4.8v) -
which makes it far more accurate. Its 0.16sec/60deg (6v) US$
internal gearing and motor are also Torque: 9.4kg.cm (4.8v) - 11kg.cm (6v)
upgraded to improve dead bandwidth and Gear Material: Metal 14.50
[Actuators & Power] centering. Gear Type: Digital
Motor: Brushless

DC Motor DC Motor used for general purposes – Name:130 motor


drive a load Axial length:8mm
3V Diameter of axle:2mm US$
Specification:20*15*25mm 2.00
Rated voltage: 3V
[Actuators & Power] No-load speed: 8000 r / min
Load current: 100mA
Stall Current: 0.7A
Weight: 17 grams
Solenoid Valve A solenoid valve is an electromechanically Voltage: 12V DC / 24V DC / 220V AC
operated valve. The valve is controlled by Rated Power: 5W
an electric current through a solenoid: in Operation model : Normally closed (N/C) US$
this case of a two-port valve the flow is Pressure: 0.02 - 0.8Mpa 12.00
switched on or off. It can be normally open Port size: G1/2''
[Actuators & Power] or normally closed. Fluid temperature: 0-100 degrees Celsius
Usage: water and low viscosity fluids

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 30


NETRO ELECTRONICS ZIMBABWE® ™
Stepper Motor A servo motor is a rotary actuator that Motor + ULN 2003 Driver
allows for precise control of angular
position. It consists of a motor coupled to a US$
sensor for position feedback. It also 8.00
requires a servo drive to complete the Diameter: 28mm
[Actuators & Power] system. The drive uses the feedback sensor Voltage: 5V
to precisely control the rotary position of Step angle: 5.625 x 1/64
the motor. This is called closed-loop Reduction ratio: 1/64
operation. By running the system closed-
loop, servo motors provide a high
performance alternative to stepper and AC
induction motors.
Relay A relay is a simple electromechanical switch Supply voltage: 5VDC, 12VDC
made up of an electromagnet and a set of Current: more than 100mA
1 Channel contacts. Relays are found hidden in all Load: 250V 10A AC or 30V 10A DC US$
sorts of devices. In fact, some of the first 2.00
[Actuators & Power] computers ever built used relays to
implement Boolean gates. Relays can be
used to drive high voltage circuits which are
controlled by low voltage circuits.

Relay A relay is a simple electromechanical switch Supply voltage: 5VDC, 12VDC


made up of an electromagnet and a set of Current: more than 100mA
2 Channel contacts. Relays are found hidden in all Load: 250V 10A AC or 30V 10A DC US$
sorts of devices. In fact, some of the first 4.00
computers ever built used relays to
implement Boolean gates. Relays can be
used to drive high voltage circuits which are
[Actuators & Power] controlled by low voltage circuits.

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 31


NETRO ELECTRONICS ZIMBABWE® ™
Relay This is a 4 Channel 5V Relay interface board, 5 V & GND external
which makes it possible to control various
4 Channel appliances, and other equipment with large 1N1-1N2 interchange relay control US$
current. interface by single chip IO 10.00
With indication LEDs. Standard interface Using a large current relay, AC250V 10A
[Actuators & Power] that can be extended in a variety of DC30V 10A
development board. With fixed screw holes
for easy installation • Suitable for a variety of platforms
51/AVR/AVR/ARM

L298n Motor Driver Based on the H Bridge circuit, this module Logic voltage 5V
can be used to control motors. Drive voltage 5V-35V
Logic Current 0mA-36mA US$
Drive current 2A (MAX single bridge) 7.00
[Actuators & Power] Storage Temperature -20 to 135
Maximum Power 25W
Weight 30g
External dimensions 43 * 43 * 27mm

Raspberry Pi The Raspberry Pi Camera Module is a Small board size: 25mm x 20mm x 9mm
Camera custom designed add-on for Raspberry Pi. It A 5MP (2592×1944 pixels) Omnivision
attaches to Raspberry Pi by way of one of 5647 sensor in a fixed focus module US$
the two small sockets on the board upper Support 1080p30, 720p60 and 21.00
[Display & Interaction] surface. This interface uses the dedicated 640x480p60/90 video record
CSI interface, which was designed especially Documentation .pdf
for interfacing to cameras. The CSI bus is
capable of extremely high data rates, and it
exclusively carries pixel data. Raspberry Pi
NOT INCLUDED

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 32


NETRO ELECTRONICS ZIMBABWE® ™
Arduino camera Camera for general use with the Arduino photosensitive array 640X480
development board. Does not come with IO voltage 2.5V to 3.0V (internal LDO to
Arduino core supplies ) the
power operation 60mW/15fpsVGAYUV US$
[Display & Interaction] Sleep < 20 μ A
Temperature operation -30 °C - 70°C 12.50
RGB Data, Optical size of 1/6 "
field of view angle of 25 °

SD Card Reader Reads and stores information on a Micro SD 1. Supports Micro SD cards, Micro SDHC
card card (high speed card)
2 level conversion circuit board that
interfaces level for 5V or 3.3V US$
3 power supply is 4.5V ~ 5.5V, 3.3V
[Wireless & voltage regulator circuit board 4.00
Communication] 4 is a standard communication interface
SPI interface
5.4 M2 screw positioning holes for easy
installation
Arduino Power Supply Power supply for Arduino, allows to Input : 100V-240V 50/60Hz
Adapter disconnect USB 5V supply and Output : DC 9V 1A /1000mA
microcontroller can stand alone. Out put adaptor : 5.5mm x 2.1mm
[Actuators Dimension: 7.6 x 7.5 x 2.6 cm US$
& Power] the adapters Connector inside positive
(+)outside negative (-) 4.00

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 33


NETRO ELECTRONICS ZIMBABWE® ™
Power Supply Fluctuation two road independent control, Compatible with 5V, 3.3 V
can switch over to 0 V, 3.3 V, 5 V. Apply to MB102 breadboard
MB102 Input voltage: 6.5-12 V (DC) or USB power US$
Breadboard On-board two groups of 3.3V, 5V DC output supply 4.50
plug pin, convenient external lead use. Output voltage: 3.3V/5V can switch over
Maximum output current: <700 ma
[Actuators Please notice: this item only a Power Supply
& Power] Module, Breadboard is not included

Power supply module Power supply to various sensors and One input: DC 6V - 12V (input voltage to
[Multioutput] components for your projects the output voltage must be higher than
1V.) US$
5.50
Output: 3.3V (+ - 0.05v error), 5.0V (+ -
[Actuators 0.05v error), 800mA (load current can not
& Power] exceed 800ma),

12V input directly converter to output


PCB board size: 4.5cm * 4.5cm
With red power indicator led
Impact/Crash Sensor The Crash sensor is a miniature snap-action 1.The module installation forefront of
switch, and frequently known as a micro collision, the module output low, there is no
switch. It is an electric switch that is collision, the output high.
2.Module reserved M3 mounting holes for
actuated by very little physical force. Micro
easy fixing in a small car. US$
[Sensors] switches are very widely used; among their
applications are appliances, machinery,
3.Module size: 2.5cm * 1.9cm. 7.00
4.with a light switch, there is a collision,
industrial controls, vehicles, and many lights, no collision lights out.
other places for control of electrical circuits. 5. VCC: 3v-12v power supply

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 34


NETRO ELECTRONICS ZIMBABWE® ™
Finger Print Sensor Sensor perfect for e.g biometric projects or Embedded processor - ARM Cortex M3
home automation and locking system Optical Sensor, 14 x 12.5mm
Image Size: 240 x 216 pixels US$
Resolution: 450 dpi 65.00
[Sensors] Supports up to 20 fingerprints
Identification: < 1.5 sec (20 fingerprints)
Operating Voltage: 3.3-6V
Operating Current: < 130mA

Logic level converter In the case of translating between 3.3V and 8 channels bidirectional voltage
5V system: VCCA connects to 3.3V power translation between different logic level,
supply. VCCB connects to 5V power translate between Ax and Bx
[Actuators supplyGND connects to power negative automatically US$
& Power] pole respectively, the two power supply Voltage level: 1.8V-6V
should be common-grounded with each 4.00
otherWhen Ax has TTL 3.3V input, Bx will
get TTL 5V outputWhen Bx has TTL 5V
input, Ax will get TTL 3.3V outputNO
direction control required

IC Holders General purpose holders for different Comes in different sizes


integrated circuits
US$
1.00

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 35


NETRO ELECTRONICS ZIMBABWE® ™
GSM/GPRS Module Send and receive SMS Operating temperature -30 ℃ to + 80 ℃;
Integrate well with various microcontrollers 1KG peak suction
A6 GSM Low standby current US$
Operating Voltage 3.3V-4.2V; 22.00
[Wireless & Power voltage> 3.4V;
Communication] Standby average current 3ma less;
Support the GSM / GPRS four bands,
including 850,900,1800,1900MHZ

GSM/GPRS Module GSM/GPRS module is used to establish * Quad-band 850/900/1800/1900MHz


communication between a computer and a * GPRS multi-slot class 12/10
SIM 800L GSM-GPRS system. Global System for * GPRS mobile station class B US$
Mobile communication (GSM) is an * Meet the GSM 2/2 Standard 22.00
[Wireless & architecture used for mobile * FM: Frequency range 76 ~ 109MHz,
Communication] communication in most of the countries. 50KHz tuning step
Global Packet Radio Service (GPRS) is an *Voltage: 3.7-4.2V
extension of GSM that enables higher data
transmission rate

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 36


NETRO ELECTRONICS ZIMBABWE® ™
GSM/GPRS Module The GPRS Shield provides you a way to Class 4 (2 W @ 850 / 900 MHz)
communicate using the GSM cell phone Class 1 (1 W @ 1800 / 1900MHz)
SIM 900 network. The shield allows you to achieve SIMCOM AT Commands. SMS
SMS, MMS, GPRS and Audio via UART by Embedded TCP/UDP stack – allows you to
[Wireless & sending AT commands (GSM 07.07 ,07.05 upload data to a web server.
Communication] and SIMCOM enhanced AT Commands). The RTC supported. US$
shield also has the 12 GPIOs, 2 PWMs and Speaker and Headphone jacks 45
an ADC of the SIM900 module(They are all Low power consumption – 1.5mA(sleep
2V8 logic) present onboard. mode)
Quad-Band 850 / 900/ 1800 / 1900 MHz – Industrial Temperature Range – -40°C to
would work on GSM networks in all +85 °C
countries across the world. Size:8.5×5.7x2cm(approx)
GSM/GPRS Module SIM808 module is a complete Quad-Band Quad-band 850/900/1800/1900MHz
GSM/GPRS module which combines GPS GPRS multi-slot class 12/10
SIM 808 technology for satellite navigation. The compact GPRS mobile station class B
design which integrated GPRS and GPS in a SMT Compliant to GSM phase 2/2+
package will significantly save both time and Class 4 (2 W @ 850/900MHz) US$
[Wireless &
Communication]
costs for customers to develop GPS enabled Class 1 (1 W @ 1800/1900MHz) 55
applications. Featuring an industry-standard Bluetooth: compliant with 3.0+EDR
interface and GPS function, it allows variable Control via AT commands (3GPP TS 27.007,
assets to be tracked seamlessly at any 27.005 and SIMCOM enhanced AT Commands)
location and anytime with signal coverage Supply voltage range 3.4 ~ 4.4V

GPS Module The NEO-6/7 module series is a family of Power Supply Range: 3 V to 5 V
stand-alone GPS receivers featuring the Model: GY-GPS6MV2, Ceramic antenna
GY-Neo 6/Neo7 high-performance u-blox 6/7 positioning EEPROM for saving the configuration data
MV2 engine. These flexible and cost-effective when powered off. Backup battery US$
receivers offer numerous connectivity LED signal indicator
[Wireless & options in a miniature 16 x 12.2 x 2.4 mm Antenna Size: 25 x 25 mm 22
Communication] package. Used for position tracking. Module Size: 25 x 35 mm
Mounting Hole Diameter: 3 mm
Default Baud Rate: 9600 bps

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 37


NETRO ELECTRONICS ZIMBABWE® ™
WiFi Module The ESP8266 WiFi Module is a self- Architecture: Xtensa lx106
contained SOC with integrated TCP/IP CPU frequency: 80MHz overclockable to
ESP8266 protocol stack that can give any 160MHz
microcontroller access to your WiFi Total RAM available: 96KB (part of it US$
network. The ESP8266 is capable of either reserved for system)
[Wireless & hosting an application or offloading all Wi-Fi Internal FlashROM: None 14
Communication] networking functions from another External FlashROM: code and data, via SPI
application processor. Flash. Normal sizes 512KB-4MB.

Bluetooth Module The HC-05 or HC-06 Bluetooth Module The module board has signal conditioning
(Master/Slave) provides a wireless circuit (3.3V compatible) to easily connect
communication link between your Arduino the signal pins directly to Arduino boards
HC- 06 and any bluetooth capable device. It's ideal or any 5V powered device.
replacement to your wired serial
connection. It enables a circuit to Recommended: 3.3V, use potential US$
communicate to another circuit through divider 11
[Wireless & wireless connectivity. Sending and
Communication] Receiving of data can be achieved within a
range of 10 meters.
Bluetooth Module HC‐05 module is an easy to use Bluetooth • Typical ‐80dBm sensitivity.
SPP (Serial Port Protocol) module,designed • Up to +4dBm RF transmit power.
for transparent wireless serial connection • 3.3 to 5 V I/O.
HC- 05 setup.The HC-05 Bluetooth Module can be • PIO (Programmable Input/Output) US$
used in a Master or Slave configuration, control.
making it a great solution for wireless 11
• UART interface with programmable
communication.This serial port bluetooth baud rate.
[Wireless & module is fully qualified Bluetooth
• With integrated antenna.
Communication] V2.0+EDR (Enhanced Data Rate) 3Mbps
• With edge connector.
Modulation with complete 2.4GHz radio
transceiver and baseband.)

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 38


NETRO ELECTRONICS ZIMBABWE® ™
Radio Module Receiver module parameters Transmitter module parameters
These RF modules are very popular among
Transmitter and the Arduino tinkerers. The 433MHz is used • Product Model: MX-05V
Receiver Module on a wide variety of applications that • Operating voltage: DC5V US$
require wireless control. These modules are • Quiescent Current: 4mA
[Wireless & very cheap and you can use them with any • Receiving frequency: 433.92MHZ 11
Communication] microcontroller (MCU). • Receiver sensitivity:-105DB
• Size: 30 * 14 * 7mm
• External antenna: 32CM

Radio Module Radio Communication, power supply: 5V


TEA5767 This is an FM receiver circuit radio based on Frequency range: 76-108MHZ
Philips TEA5767 digital radio-receiver PCB size: 31*30mm
module. The radio receiver uses I2C With reverse polarity protection diode US$
[Wireless & interface with Arduino UNO development With power output filtering sensor
Communication] board. The TEA5767 module offers such I2C bus communication 12
features as stereo or mono outputs, radio Multi capacitor combined filter
station scanning and signal strength Blue LED power indicator
indication. FM chip module TEA5767
Wireless Transceiver The nRF24L01 module is a highly integrated, Brand Name:RobotDynModel
ultra low power (ULP) 2Mbps RF transceiver Number:Mod-NRF24L01-SPISupply
for the 2.4GHz ISM (Industrial, Scientific and Voltage:3.3Vis_customized:YesCondition: US$
NRF24L01 Medical) band. With peak RX/TX currents NewApplication:RF transceiverType:RF 9.50
lower than 14mA, a sub μA power down transceiver
mode, advanced power management, and a
[Development boards 1.9 to 3.6V supply range, the nRF24L01
& Microcontrollers] provides a true ULP solution enabling
months to years of battery lifetime when
running on coin cells or AA/AAA batteries

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 39


NETRO ELECTRONICS ZIMBABWE® ™
Capacitors Ceramic and electrolytic Pico, Nano, Micro
25V
[Ceramic and
electrolytic] US$
0.25
[Basic Components]

Capacitors Kit 1 General purpose Assorted

US$
14
[Basic Components]

Capacitors Kit 2 General components Assorted

US$
21
[Basic Components]

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 40


NETRO ELECTRONICS ZIMBABWE® ™
Sim908 SIM908 module is a complete Quad-Band Quad-Band 850/900/1800/1900 MHz
GSM/GPRS module which combines GPS GPRS multi-slot class 10
technology for satellite navigation. The GPRS mobile station class B
[Wireless & compact design which integrated GPRS and Compliant to GSM phase 2/2+
Communication] GPS in a SMT package will significantly save Class 4 (2 W @850/900 MHz)
both time and costs for customers to Class 1 (1 W @ 1800/1900MHz) US$
develop GPS enabled applications.Featuring SIM application toolkit 70
an industry-standard interface and GPS Supply voltage range:
function, it allows variable assets to be GPRS: 3.2 ~ 4.8 V
tracked seamlessly at any location and GPS: 3.0 ~ 4.5V
anytime with signal coverage Operation temperature: -40°C to +85 °C
Water Pump with USB Item Type: Non-Clogging Submersible
Pump
Model: JT-160A
Size: 45×40mm/1.77×1.57in (Approx.)
5V, 9V, 12V Cable length: 1.5m/4.92ft (Approx.) US$
Working Voltage: 4V-6V 0.6-1.8W
Rated voltage: DC 12V 20
No load Rated current: less than 0.15A
Load Current Rating: 0.35A
Maximum Flow Rate: 280L/Hour
Head: 12V Specification 2.2/m lift
Crystal A crystal oscillator is an 6MHz
Oscillators electronic oscillator circuit that uses the 8MHz
mechanical resonance of a 11.0592 MHz US$
vibrating crystal of piezoelectric material to 12MHz 1.00
create an electrical signal with a precise 16MHz
frequency. 20MHz
[Basic Components] 32.768MHz

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 41


NETRO ELECTRONICS ZIMBABWE® ™
The Atmega328 is one of the Program Memory Type Flash
ATMega 328p Chip microcontroller chips that are used with the Program Memory (KB) 32
popular Arduino Duemilanove boards. Of CPU Speed (MIPS) 20
these 2, the Atmega328 is the upgraded, RAM Bytes 2,048 US$
more advanced chip. Unlike the Atmega168 Data EEPROM (bytes) 1024
which has 16K of flash program memory Timers 2 x 8-bit, 1 x 16-bit 8.00
and 512 bytes of internal SRAM, the Temperature Range (C) -40 to 85
[Development board & Atmega328 has 32K of flash program Operating Voltage Range (V) 1.8 to 5.5
Microcontrollers] memory and 2K of Internal SRAM. Pin Count 32
Low Power Yes
Cap Touch Channels 16
The PIC Microcontroller is an electronic 40-pin Low Power Microcontroller
PIC device that is easy-to-use in both hardware Flash Program Memory: 8192 bytes
and software. Sensing the environment by EEPROM Data Memory: 256 bytes
Microcontrollers receiving inputs from many sensors, PIC SRAM Data Memory: 368 bytes
Microcontroller affects its surroundings by I/O Pins: 33
controlling lights, motors, and a number of Timers: Two 8-bit / One 16-bit US$
[Development board & other accessories. It's intended for anyone A/D Converter: 10-bit Eight Channel 8.00
Microcontrollers] making interactive hardware projects by PWM: Two 10-bit Modules
connecting it with a power source, few leds SSP: SPI and I²C Support
and resistors. 16FXXXX series USART: Yes
External Oscillator: up to 20MHz
PIC KIT3 The MPLAB PICkit 3 allows debugging and USB (Full speed 12 Mbits/s interface to
programming of PIC® and dsPIC® Flash host PC)
microcontrollers at a most affordable price MPLAB IDE compatible (free copy US$
point using the powerful graphical user included) 35
interface of the MPLAB Integrated Built-in over-voltage/short circuit monitor
[KITS] Development Environment (IDE). Firmware upgradeable from PC/web
download.Totally enclosed.
Supports low voltage to 2.0 volts (2.0v to
6.0v range)

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 42


NETRO ELECTRONICS ZIMBABWE® ™
PIC Development PIC microcontroller development board An external 12V power supply; also USB
Board provides ICSP download debugging powered;
interface with PIC-Circuit Debugger (PICKit2 Onboard there MAX3232 chip, do serial
& ICD2, etc.), or the programmer (K149 & communication experiment; US$
[KITS] K150, etc.) to facilitate for program board provides 5V and 3.3V voltage;
debugging, downloading. Completely 8bit light water experiment; 35
independent of the IO port design, LCD interface, with 12,864;
compatible with a variety of models, LCD Interface with 1602;
various DIP Series package MCU.
Universal Programmer Helps for easy PIC programming and The seat supports the following
Seat installation programming microcontroller:
PIC16/18XX 40PIN Series devices (except
16F59) US$
PIC16/18XX 28PIN Series devices (except
[Development board & 16F57) 15
Microcontrollers] PIC16/18XX 18PIN Series devices
The PIC 8PIN/14PIN/20PIN family of
devices (except 10FXX)
M3008 Need to add analog inputs? This chip
will add 8 channels of 10-bit analog
input to your microcontroller or Resolution (Bits): 10bit
microcomputer project. It's super easy Sampling Rate: 200kSPS
Supply Voltage Type: Single Supply
to use, and uses SPI so only 4 pins are US$
Voltage Min: 2.7V
required. We chose this chip as a great
accompaniment to the Raspberry Pi
Supply Voltage Max: 5.5V ADC / DAC Case 6.00
Style: DIP No. of Pins: 16Pins
computer, because its fun to have
analog inputs but the Pi does not have
an ADC.

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 43


NETRO ELECTRONICS ZIMBABWE® ™
Color Sensor Module The TCS3200 sensor is a sensor which can • Input voltage : DC 3V-5V
detect any number of colours with right • Output frequency voltage : 0 ~
programming. This module contains RGB 5V
(Red Green Blue) arrays to give you the • Use bright white LED lights US$
[Sensors] color in RGB format. • Can be connected directly with
Microcontroller
12
• Static detection of the measured
object color
Best detection distance : 10mm
IR TSOP 4838 IR (Infrared) sensor tuned to 38KHz, perfect Carrier Frequency: 38kHz
Receiver for receiving commands from a TV remote Transmission Range: 45m
control. Runs at 3V to 5V. To use, connect Directivity: 45°
pin 3 (all the way to the right) to 5V power, Supply Voltage Min: 2.5V US$
pin 2 (middle) to ground and listen on pin 1. Supply Voltage Max: 5.5V
[Sensors] It doesn't do any decoding of the signal, just Supply Current: 350µA 1.00
passes the 'raw data' along

IR TSOP 1838 IR (Infrared) sensor tuned to 38KHz, perfect Carrier Frequency: 38kHz
IR Receiver for receiving commands from a TV remote Transmission Range: 45m
control. Runs at 3V to 5V. To use, connect Directivity: 45°
pin 3 (all the way to the right) to 5V power, Supply Voltage Min: 2.5V US$
[Sensors] pin 2 (middle) to ground and listen on pin 1. Supply Voltage Max: 5.5V
Supply Current: 350µA 1.00
Operating Temperature Range:
-25°C to +85°C

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 44


NETRO ELECTRONICS ZIMBABWE® ™
ATTINY 85 Development board on ATtiny85, similar to Support for the Arduino IDE 1.0+ (OSX /
DEVELOPMENT BOARD the Arduino line, only cheaper, compact, Win / Linux)
lower power consumption and a bit less Power via USB or External Source - 5V
powerful. The board supports use of or 7 -35V (automatic selection)
On-board 500ma 5V Regulator
specific Arduino IDE and conveniently uses
Arduino syntax for programming. This is a
Built-in USB(and serial debugging) US$
6 I/O Pins (2 are used for USB only if
great way to jump into electronics and also your program actively communicates 10
perfectly fits when an Arduino is too big. over USB otherwise you can use all 6
even if you are programming via USB)
8k Flash Memory (about 6K after
bootloader)
ATTINY 85 IC The high-performance, low-power Capture/PWM Peripherals 5PWM
Microchip 8-bit AVR RISC-based Timers 2 x 8-bit
microcontroller combines 8KB ISP flash Number of Comparators 1
memory, 512B EEPROM, 512-Byte SRAM, 6 Temperature Range (C) -40 to 85 US$
general purpose I/O lines, 32 general Operating Voltage Range (V) 1.8 to 5.5
purpose working registers, one 8-bit Pin Count 8 10
timer/counter with compare modes, one 8-
bit high speed timer/counter, USI, internal
and external Interrupts, 4-channel 10-bit
A/D converter, and programmable
watchdog timer with internal oscillator
Thermistor Thermistors are temperature-sensing 10K, 50K, 100K
NTC elements made of semiconductor material
that has been sintered in order to display
large changes in resistance in proportion to US$
small changes in temperature.
This resistance can be measured by using a 1.00
small and measured direct current, or dc,
passed through the thermistor in order to
measure the voltage drop produced.

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 45


NETRO ELECTRONICS ZIMBABWE® ™
Adapter Converter The LCQT-TSSOP28 is a 35.56 x 17.78mm SOP28/SSOP28/TSSOP28 0.65mm/1.27
28-TSSOP to 28-DIP quick turn small outline
Tssop28 DIP Prototyping Adapter which mates with
mm to DIP adapter
TSSOP28 package to standard breadboard Color: Green
and breakout board for rapid and easy Material: Glass Fiber FR4-side
prototyping. This prototyping adapter is made Dimensions: 35 x 20 mm
of 1.58mm FR-4, approved by UL 94V-0
standard with 1/2oz Cu traces board. The Weight: 5 g US$
pins are made of brass 360 1/2-hard as per 5.00
UNS C36000 ASTM-B16-00 standard with Au
flash finish and the pin is insulated with
polyester as per UL 94V-0 standard.
AC voltage sensor Single-phase AC active output voltage Voltage Transformer: Onboard Precision
mutual inductance module equipped with Micro Voltage Transformer
ZMPT101B series of high-precision voltage Mode voltage output: the module can
transformer and high-precision op amp measure AC voltage within 250V, the US$
current, easy to 250v within the AC power corresponding output mode can be
signal acquisition. adjusted 9.50
Output signal: the output signal for the
sine wave, the waveform of the median
(DC component)
Supply voltage: 5-30v
IR Transmitter Module An infrared transmitter is simply a Light - Power Supply:3-5V
Emitting Diode which generates invisible IR - Infrared center frequency:850nm-
light with a wavelength of between 1 mm 940nm
and 750 nanometers, and some associated - Infrared emission angle: about US$
circuitry. In an infrared remote control, for 20degree
example, pushing a button sends an electric - Infrared emission distance: about 1.3m 4.00
[Sensors] signal to the LED, which converts the signal (5V 38Khz)
into a beam of infrared light. The receiving - Interface socket: JST PH2.0
device detects the light with a photodiode
and converts it to an electrical signal which,
via an integrated circuit, controls its actions.

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 46


NETRO ELECTRONICS ZIMBABWE® ™
Audio Amplifier The LME49710 is part of the ultra-low Common Mode Rejection Ratio 110 dB
distortion high slew rate opamps optimized Dual Supply Voltage 15 V
LME49710NA and fully specified for high-performance, Gain Bandwidth Product 55 MHz
Combining advanced leading-edge process Input Bias Current 7 nA US$
technology with state-of-the-art circuirt Input Offset Voltage (Vos) 50 µV
design, LME49710 delivers superior audio Load Impedance 2 kΩ 7.00
amplification for outstanding audio Max Supply Voltage 34 V
performance. Min Dual Supply Voltage 2.5 V
Min Supply Voltage 5V
Nominal Supply Current 4.8 mA
Digital-Audio- The TDA7293 is a monolithic integrated 1. Low distortion, low noise, high
Amplifier-Mono- circuit in. Multiwatt15 package, intended pressurization
Single-Channel for use as audio. Class AB amplifier in Hi-Fi 2. Switch machine mute,over heat
field applications, such as home stereo, self protection, short circuit protection US$
TDA7293 powered loudspeakers and Top class TV. 3. Output power:100W
The built-in muting function with turn-on 4. Power input:Double AC 12-32V,100W 25
delay simplifies the remote operation 5. Channel type:1.0 mono
avoiding on-off switching noises. 6. Frequency range:20Hz-20KHz
7. Compatible speaker:4-8Ω,50-200W,
Transistor BC547 is a NPN transistor hence the Bi-Polar NPN Transistor
collector and emitter will be left open DC Current Gain (hFE) is 800 maximum
BC547 (Reverse biased) when the base pin is held Continuous Collector current (IC) is
at ground and will be closed (Forward 100mA US$
biased) when a signal is provided to base Emitter Base Voltage (VBE) is 6V
pin. BC547 has a gain value of 110 to 800, Base Current(IB) is 5mA maximum 1.00
this value determines the amplification Available in To-92 Package
capacity of the transistor. To bias a
transistor we have to supply current to base
pin, this current (IB) should be limited to
5mA.

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 47


NETRO ELECTRONICS ZIMBABWE® ™
Transistor The TIP31 is a standard NPN bipolar Type - n-p-n
junction transistor that is often used for Collector-Emitter Voltage: 40 V
TIP31 - npn medium power applications. A bipolar Collector-Base Voltage: 40 V
junction transistor (BJT) is a three terminal Emitter-Base Voltage: 5 V
device that is allows for amplification or Collector Current: 3 A
switching applications. Some transistors can Collector Dissipation - 40 W US$
amplify a small current which will then be DC Current Gain (hfe) - 10 to 50 1.00
powerful enough to operate a lamp or Transition Frequency - 3 MHz
other high current devices. These devices Operating and Storage Junction
are also able to detect a change in voltage Temperature Range -65 to +150 °C
and act as a switch. Package - TO-220
Transistor Complimentary to TIP31 Complimentary to TIP31

TIP32 - pnp US$


1.00

IR LEDS 5mm Just like any normal LEDs but these are 1 x IR receiver LED
specifically Infra Red LEDs for transmitting 1 x IR transmitter LED
Receiver/Transmitter and receiving IR rays US$
1.00

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 48


NETRO ELECTRONICS ZIMBABWE® ™
Operational Amplifier An LM741 operational amplifier is a DC- Minimum, normal and maximum Power
coupled high gain electronic voltage Consumption for this IC is ±10v, ±15v and
LM741 amplifier. It has only one op-amp inside. An ±22v respectively.
operational amplifier IC is used as a Operating temperature should be -50 to US$
comparator which compares the two signal, 125 ˚C.
the inverting and non-inverting signal. The Supply current – 1.7 to 2.8mA. 1.00
main function of this IC is to do Soldering pin temperature – PDIP package
mathematical operation in various circuits. - 260 ˚C (for 10 seconds – prescribed)
Op-amps have large gain and usually used TO-99 and CDIP - 300 ˚C (for 10 seconds –
as Voltage Amplifier. The LM741 can prescribed)
operate with a single or dual power supply Available packages: TO-99, CDIP & PDIP
voltage.
Diodes Allows current in one direction for 1N4001, 1N4002, 1N4003, 1N4004,
circuit protection, also handy for when you 1N4005, 1N4006, 1N4007
1N400x need a voltage drop for sensors that work
on lower voltages. US$
0.25

Seven Segment One Output a single digit with this neat seven Common cathode
Digit seg display and some letters
US$
1.00

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 49


NETRO ELECTRONICS ZIMBABWE® ™
Seven Segment Two Display sensor values with 2 – 7 seg display Common cathode
Digit with decimal points display
US$
2.00

Seven Segment Four Be it time, a timer, sensor values or counter Common cathode
Digit this 4 digit 7 seg display can handle that for
you. US$
3.00

Dot Led Matrix This product is a common anode type unit. 8 x 8 LED matrix.
A single matrix is formed by sixty four LED’s Red
arranged in eight columns and eight rows (8 Digital device Interface.
x 8). The anodes of the five LED’s forming Easy to Control. US$
one row are connected together. Similarly, Operating Voltage: 5 V.
the cathodes of the eight LED’s of a column In this arrangement, the cathodes are 5.00
are connected together. switched to turn them of a row ON or OFF

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 50


NETRO ELECTRONICS ZIMBABWE® ™
Dot Led Matrix Matrix shield. A single matrix is formed by 8 x 8 LED matrix.
Module sixty four LED’s arranged in eight columns Digital device Interface.
and eight rows (8 x 8). The anodes of the Easy to Control with shift register
five LED’s forming one row are connected Connecting wires, few wires to connect to US$
together. Similarly, the cathodes of the Arduino, saving other pins for you
eight LED’s of a column are connected 5.00
together. In this arrangement, the cathodes
are switched to turn them of a row ON or
OFF
REMOTE CONTROL KIT

1. IR Remote,
2. receiver, US$
IR remote control set 3. transmitter
4. cable 5.00

Liquid Level SENSOR Stainless Steel Tank/Pool Water Level Liquid Model Number:ESC7810 2A1
Sensor Float Switch Max Contact Rating:30WMax Switching
ESC7810 2A1 Voltage:220V AC or DCMax Switching US$
Current:1.5AMax Breakdown 20
Voltage:300V AC or DCMax Carry
Current:3.0ANet weight:49gMax Contact
Resistance:100Mohms

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 51


NETRO ELECTRONICS ZIMBABWE® ™
LED Bar Graph Ten segment LED display. You can control • 10 segments
each LED to represent information e.g • Assorted colors
battery or water level. • Size : 25.40*10.10*7.90 mm
• Lens color : Black US$
3.00

Weight/Load Sensor This 5KG Weight Sensor sometimes called a On-chip power-on-reset
load cell or strain gauge can translate up to Current consumption including on-chip
YZC-131 5KG of pressure (force) into an electrical analog power supply regulator: normal US$
signal. Load cells are designed to measure a operation < 1.5mApower down < 1uA 10
specific force, and ignore other forces being Operation supply voltage range: 2.6 ~
applied. 5.5V
Operating Temperature Range:-20 degree
~ +85 degree
Model: YZC-131
Material: Aluminum
Dimensions: 75×12.7×12.7mm
Raspberry Pi Charger Power supply for Raspberry Pi 2A

US$
9.00

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 52


NETRO ELECTRONICS ZIMBABWE® ™
IR Obstacle Avoidance This Infrared Obstacle Avoidance Sensors • There is an obstacle, the green
Module has a built-in IR transmitter and IR indicator light on the circuit
receiver that sends out IR waves and then board
looks for the reflected IR waves to detect • Detection distance: 2 ~ 30cm
the presence of any objects in front of the • Detection angle: 35 °
[Sensors] sensor module. The module has an on • Comparator chip: LM393
US$
board potentiometer that let users adjust • 3mm screw holes for easy 5.00
the detection range. This sensor can be mounting
used in light and complete darkness.

Real Time Clock (RTC) This module allows you to use your Arduino – Wide working voltage: 2.0~5.5 V
DS1307 to do many time and date related things – When The working voltage is 2.0V, the
[ without battery ] like starting something at a specific date current is less than 300nA
and time or to record the date of time of – Read/write clock or RAM data have two US$
something like the time a sensor were transmission modes: Single-byte / many
triggered. The backup battery (not bytes group 5.00
included) makes sure that the time and – Simple 3 line interface. Easy to install
date are kept accurate even if your Arduino
is powered off.

Hall Sensor (speed Linear Hall magnetic module and a digital Size: 2.7 cm x 1.4 cm
sensor) interface, built-in 13 LED build a simple Main chip: LM393, 3144 Hall sensor
circuit to produce a magnetic field warning Working voltage: DC 5 V
lamp 13 comes with digital interfaces of the US$
[Sensors] LED, the Hall sensor magnetometer access Pinouts:
number 3 interface, when Hall External 5V VCC 3.00
magnetometer Sensor senses a key signal, External GND
LED lights, otherwise off. DO digital output interface (0 and 1)

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 53


NETRO ELECTRONICS ZIMBABWE® ™
Transistors This small NPN silicon transistor is perfect
for any Arduino projects up to 45V, it can be Each transistor is a general purpose
NPN/PNP used in amplification circuits or simply amplifier, model PN2222 (same pinout as US$
switching high power LEDs on or off. the 2N3904) and has a standard EBC 1.00
pinout. They can switch up to 40V at peak
currents of 1A (not continuously, just
peak!), with a DC gain of about 100

Joy Stick This analog joystick has a feel that’s Customized:Yes


reminiscent of the PlayStation 2 controller
and for that reason it’s become a favorite of Supply Voltage:2.5-5V
ours. The only thing that could make it
better is a “smart” version. This thumbstick
will report its position over I2C and is US$
designed to be compatible with the Arduino 3.00
so you can add it to your project solder-
free!
Joy Stick Module Designed for quick and easy setup, no -can add Nrf24L01 RF interface for
soldering needed. 5 momentary push wireless comm
buttons, 2-axis thumb joystick -can add Nokia 5110 LCD US$
Onboard switches can switch between 3.3v -Can also add BT interface for wireless 7
and 5v serial comm
-can add I2C interface too

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 54


NETRO ELECTRONICS ZIMBABWE® ™
Stepper Motor 17HS2408 4-led nema 17 stepper motor Type: hybrid
Nema 17 perfect for your Laser and 3D printer motor Phase: 2
and CNC project Step angle ( deg 1.8 rees)
Current / phase: 0.6A US$
50

Stepper Motor 4 lead nema 23 stepper motor 2.8A diame Step angle accuracy: +-5%
Nema 23 CNC Laser grind foam plasma cut Resistance accuracy: +-10%
Temp rise: 80 deg Max
US$
85

Proximity Sensor Inductive proximity sensor switch Detecting dist : 4mm


Supply voltage: 6 – 36V DC
[Inductive] Current output: 300Ma
Response freq: 0.5KHz US$
Operating temp: -25 - +55 deg
9.00

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 55


NETRO ELECTRONICS ZIMBABWE® ™
Electric Lifting Magnet Mini solenoid electromagnet electric lifting Input voltage: 6 – 36V DC
electro magnet strong holder

US$
12

This is a very easy sensor to work with. It Power supply: 3v or 5v DC


Pulse sensor/Heart works from an analog pin and can plug
rate sensor directly into your Arduino 3.3V or 5V power
pin. US$
[Sensors] 8.00

YUN Board Powerful board in the Arduino family with Processor: atmega32u4 ( 8 bit, 16MHz,
more memory and functionality 2.5KB RAM, 32KB Flash ) and Atheros
Its an All in One Arduino board all built in on AR9331 ( MIPS @400MHz, 64MB DDR2,
one board 16MB Flash ) US$
Features: Ethernet and WiFi, USB-A port, 70
microSD slot, 20 Digital I/O, micro USB
connection

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 56


NETRO ELECTRONICS ZIMBABWE® ™
Temperature probe While there are many types of temperature Digital temperature conversion and
temperature sensor sensors available in the market, the output. Advanced single-bus data
DS18B20 Temperature Sensor is the best communication. Maximum 12-bit
DS18b20 choice in applications which require high resolution, accuracy up to ±0.5 degrees US$
accuracy and high reliability. Its ultra-small Celsius. Parasitic mode available
size, low hardware overhead, strong anti- 8.00
interference capability and high accuracy, Temperature detection range: -55 ° C ~
[Sensors] together with other additional features +125 ° C (-67 ° F ~ +257 ° F). Built-in
makes DS18B20 even more popular among EEPROM and temperature limit
users.
RGB Leds This is a 5mm RGB LED (Red Green Blue) • Pin length: >20mm
with four pins. Triple output one for each • Diameter: 5mm
color with a common cathode. This LED can • Emitting Color: RGB
be used for three status indicators or pulse US$
width modulation by mixing the different
colors at different brightnesses you could 1.00
get 257x257x257 different colors which is
16,974,593 colors to choose from!This pack
contains 5 units of 5mm LED RGB –
Common Cathode
Battery Holder Battery holder for four 1.5V batteries. Good 6V
to use where a battery power supply is Holds 4 batteries
4 battery holder required.
US$
2.50

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 57


NETRO ELECTRONICS ZIMBABWE® ™
Toggle Switch For general purpose ie control circuits.

1 PC US$
1.00

Atomic - Ultrasonic Ultrasonic atomizer using high frequency


Moisturizer/Humidifier oscillation water spray device, the Type:BackgroundsWeight:176gMaterial:pl
/Fogger connecting piece and the circuit, high asticModel Number:12LED
frequency oscillatory fog atomizing force humidifierName:New
+ adapter will be produced under the containing air HumidifierINPUT:AC100-240V-50/60Hz
ion and thick fog can increase the air 1AApplication:Incubator US$
humidity and fresh air. Humidifier,Indoor, rockery, 35
landscapeCable length:about 2.2 m

Tilt Switch These tilt switches use a metal ball which Type:Vibration
creates the same outcome as a mercury tilt Sensor Material:Mixtureis_
switch, without the use of mercury. These customized:Yes
tilt switches are ROHS compliant. Model Number:SW-520D US$
Usage:Vibration
Sensor Theory:Resistance Sensor 1.00
Output:Digital Sensor

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 58


NETRO ELECTRONICS ZIMBABWE® ™
Reed switch The reed switch contains a pair (or more) of Open reed switch
magnetizable, flexible, metal reeds whose Working voltage: 3.3V~5V
end portions are separated by a small gap Comparator output, clean signal, great
when the switch is open. The reeds are waveform, and strong driving ability US$
hermetically sealed in opposite ends of a digit switch output (0 and 1)
tubular glass envelope.A magnetic field Fixed bolt hole for easy installation 1.00
(from an electromagnet or a permanent
magnet) will cause the reeds to come
together, thus completing an electrical
circuit.
Solar Cells The 1 Watt 6 Volt solar panel is lightweight, Open Circuit Voltage: 7.7V
waterproof, and designed for long term Peak Voltage: 6.5V
1 watt outdoor use in any environment. The panel Peak Current: 180mA
uses high-efficiency monocrystalline solar Peak Power: 1.2W US$
100x60mm cells, and is UV- and scratch-resistant. Power Tolerance: +/-10%
Small solar panel, great for prototypes eg For maximum power output, orient the 10
solar tracker. panel towards the sun

Raspberry 3B+ With an upgraded processor boasting SoC: Broadcom BCM2837


impressive new packaging and improved CPU: 4× ARM Cortex-A53, 1.2GHz
(+ charger) networking capabilities, the new Raspberry GPU: Broadcom VideoCore IV
Pi 3B+ sits head and shoulders above its RAM: 1GB LPDDR2 (900 MHz) US$
predecessor the Raspberry Pi 3 B. Networking: 10/100 Ethernet, 2.4GHz
802.11n wireless 85
Bluetooth: BT 4.1 Classic, Low Energy
Storage: microSD
GPIO: 40-pin header, populated
Ports: HDMI, 3.5mm analogue audio-video
jack, 4× USB 2.0, Ethernet, Camera Serial

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 59


NETRO ELECTRONICS ZIMBABWE® ™
Temperature-Sensor For electronic enthusiasts and hobbyists, Power supplyrange is 3.0V to 5.5V
the DS18B20 is a good start for learning and Zero standby power required
developing temperature-dependent Measures temperatures from -55°C to
DS18B20 prototypes. +125°C. Fahrenheit equivalent is -67°F to US$
+257°F
±0.5°C accuracy from -10°C to +85°C 4.00
[Sensors] Thermometer resolution is programmable
from 9 to 12 bits
Flame Sensor Flame Detection Sensor Module is sensitive Detection angle about 60 degrees, it is
to the flame, but also can detect ordinary sensitive to the flame spectrum.Accuracy
light. Usually used as a flame alarm. Detects adjustable
a flame or a light source of a wavelength in Operating voltage 3.3V-5V US$
the range of 760nm-1100 nm. Detection Output a. analog voltage outputb. digital
[Sensors] point of about 60 degrees, particularly switch outputs (0 and 1) 7.00
sensitive to the flame spectrum. Sensitivity With a mounting screw holePCB size: 3cm
is adjustable, stable performance. * 1.6cm

Encoder and Decoder


1 Pc
HC 12 D US$
And
HC 12 E 2.50

[Each]

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 60


NETRO ELECTRONICS ZIMBABWE® ™
Netro Contact Information
Email: info@netrozim.co.zw
Netro Customer Care: +263 778 530 166
Facebook Shop: www.facebook.com/netrozim/shop
Website: www.netrozim.co.zw
Offices: Harare, Joina City, 12th Floor, Bulawayo: H and S Mall, Shop 25, 2nd Floor
For products out of stock or not in the catalog you can always request for a preorder. Preorders are
delivered every month, dates depend on order size and will be told to you by Netro officials. Please
note: the only way to confirm a preorder is by making a prepayment of at least 50% of the quoted
price. Also check out our Facebook shop and Website for prices. Click this link to WhatsApp us.
Disclaimers: information given in this catalog should be verified with appropriate data sheets of components.
Components may vary in color, model, manufacturer etc. Confirm when buying.
ALL PRICES ARE IN US$. TRENDING MAY RATES APPLY TO BANK/ECOCASH TRANSACTIONS.
Out of experience we DO NOT REFUND and we DO NOT ACCPET returns. Confirm before buying.

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 61


NETRO ELECTRONICS ZIMBABWE® ™
IGNITING CREATIVITY- LEARN BY DOING

2019-2020 VERSION 2.0 www.netrozim.co.zw +263 778 530 166 page 62

You might also like