Professional Documents
Culture Documents
PARTES XAS 185 JD 1310 3011 74 Rev 01
PARTES XAS 185 JD 1310 3011 74 Rev 01
PARTES XAS 185 JD 1310 3011 74 Rev 01
“Copyright 2011, Atlas Copco Compressors LLC Rock Hill, South Carolina.
Any unauthorized use or copying of the contents or any part of this book is
prohibited. This applies in particular to trademarks, model denominations, part
numbers and drawings.”
Selected Lubricants
Compressor: Capacity:
Name:
Address:
Telefax: Parts:
1310 3011 74 3
16
19
8 19
15
11
10
17 13 8
12 10
14
6
5
2
7 3 1
18 9
8
4
20
2
1
4 1310 3011 74
1. Compressor Drive Group
Ref Part Number Qty Name Remarks
1310 3011 74 5
14
12
13
15
6 15 2
3
11
8 5
9 8
5 7
10
16
6 1310 3011 74
2. Engine Mounts
Ref Part Number Qty Name Remarks
1310 3011 74 7
9
12
3
11
17
13
8
7
19
10 6
20
15
14
16
2
18
8 1310 3011 74
3. Air Intake
Ref Part Number Qty Name Remarks
1310 3011 74 9
7
4
6
5 3
10 1310 3011 74
4. Exhaust System
Ref Part Number Qty Name Remarks
1310 3011 74 11
12 1310 3011 74
5. Cooling System
Ref Part Number Qty Name Remarks
1310 3011 74 13
14 1310 3011 74
6. Air Outlet
Ref Part Number Qty Name Remarks
1310 3011 74 15
16 1310 3011 74
7. Oil System
Ref Part Number Qty Name Remarks
1310 3011 74 17
10
5
2
9
29 11
4 7
2 27
3 21
1 8
6
15
12
2 2
5 1 20
14 2
28
13 19
19
18
28
19
2
16 17
21
16 20
27
19
20
19 28
19
22
19
20 24
19
25
19
26
23
18 1310 3011 74
8. Regulating System
Ref Part Number Qty Name Remarks
1310 3011 74 19
18
4
2
4 17
5 7
4
19
2 13 11
4 6
4
14
12
13 21
15
12
18
7 3
20 5
10 7
6 6
16
19
7
6
20 1310 3011 74
9. Fuel System
Ref Part Number Qty Name Remarks
1310 3011 74 21
22 1310 3011 74
10. Hood Assembly - Steel Version
Ref Part Number Qty Name Remarks
o
1) Standard color is yellow
o
For availability of other colors consult an Atlas Copco sales representative.
* Contained in the assembly.
1310 3011 74 23
24 1310 3011 74
11. Body Work - Steel Version
Ref Part Number Qty Name Remarks
o
1) Standard color is grey
o
For availability of other colors consult an Atlas Copco sales representative.
* Contained in the assembly.
1310 3011 74 25
1
3 7
5
4 8
4
5
26 1310 3011 74
12. Hood Assembly - PE Version
Ref Part Number Qty Name Remarks
o
1) Standard color is yellow
o
For availability of other colors consult an Atlas Copco sales representative.
* Contained in the assembly.
1310 3011 74 27
26
25
19 18 24
23 22
15
16 21
14 20
17 9
13
18
19
12
7 11
10 10
11 8
4
1
6 5
4
4
28 1310 3011 74
13. Body Work - PE Version
Ref Part Number Qty Name Remarks
o
1) Standard color is grey
o
2) Standard color is yellow
o
For availability of other colors consult an Atlas Copco sales representative.
* Contained in the assembly.
1310 3011 74 29
14
6 5 12
18
17
23
6
25
1 21
19 11
20
2
13 10
4 7
14 24 16 15
26
22
3
9
30 1310 3011 74
14. Control Panel
Ref Part Number Qty Name Remarks
1310 3011 74 31
32 1310 3011 74
15. Electrical System
Ref Part Number Qty Name Remarks
1310 3011 74 33
2
4
1
4
6
7
8
4
2
3
4 8
1 7
34 1310 3011 74
16. Road Lighting
Ref Part Number Qty Name Remarks
1310 3011 74 35
36 1310 3011 74
17. Drawbar, Axle Assembly
Ref Part Number Qty Name Remarks
* Included in assembly.
1310 3011 74 37
1
element of design has been removed or rendered e. engine or compressor mounts of the enclosure doors open. 1. For full operating and complete maint enance instructions, safety precautions, as well as for
inoperative by any person. f. inlet air throttling system location of components, consult instruction book.
Atlas Copco Airpower 1613 3385 00
2. Record all data, m aintenance work effected, etc. in an operator's log book.
1310 4156 20
(A) The removal or rendering inoperative, other that for (B) The use of the compressor after such device or
the purpose of maintenance, repair, or replacement, element of design has been removed or rendered
of any noise control device or element of design inoperative.
(listed in this owner's manual) incorporated into this
compressor in compliance with the Noise Control Act. Atlas Copco Airpower 1613 3384 00
GENUINE PARTS TIRE AND LOADING INFORMATION
SERVICE PAKS The weight of cargo should not exceed 178 kg or 391 lbs.
OPERATING INSTRUCTIONS 1310 3003 74 normal (250/750 hr) TIRE SIZE COLD TIRE PRESSURE
BEFORE STARTING: DURING OPERATION: 1310 3003 75 yearly (500hr)
SEE OWNER'S
FRONT 205/75 D15 50 PSI/350 kPa MANUAL FOR
1. Check engine and compressor oil levels. At regular intervals check: 1310 3003 73 yearly (1000hr)
2. Check fuel level.
REAR ADDITIONAL
3. Drain water and sediment from fuel filter. (If necessary) 1. Vacuum indicators. If red part shows full out, COMPRESSOR OIL
4. Chec k air filter vacuum indicators. Service filter element if indicator shows red. stop unit and service filter element.
1615 5947 00 1.3 - Gallon (5 Liter) container INFORMATION
5. Check to make sure Circuit Breaker is not tripped. (Circuit Breaker is located inside canopy driectly 2. Unloading and working pressures. SPARE
behind control panel)
1310 0334 30 5 - Gallon pail 1310 03 03 69
WARNING
TIE DOWN
FIRE HAZARD! HERE
Do not use ether to aid in
starting. Unit is equipped with 131 0 0354 95
glow plugs.
1 310 0302 83
WARNING
Engine is fitted with an alternator.
Failure to comply with the following could result in
death or serious injury
1. Never reverse the battery polarity. CAUTION DANGER DANGER
2. Never disconnect the battery while the engine is Do not mix oil brands.
Follow Atlas Copco operating BURST HAZARD! INHALATION
running. When starting with a spare battery,
connect this battery in parallel with the standard instructions for proper maintenance, HAZARD!
one. Disconnect the spare battery after starting lubricant grades and change Relieve air pressure before
without disconnecting the standard battery. intervals. loosening oil filler cap or any Do not use discharged air
Use only selected lubricant fittings.
3. Never run the engine with the main or voltage
for breathing.
specified by Atlas Copco.
sensing cables disconnected. Failure to comply will void warranty Contents under pressure. Failure to comply will result
and may result in equipment Failure to comply will result
4. Disconnect the alternator and regulator in death or serious injury.
damage. in death or serious injury. 974 7 6011 00
1310 0302 73 connections during arc welding on the unit . 1310 31 12 52
9 747 6014 00
CAUTION
BURN HAZARD!
Keep clear.
Hot exhaust may burn. 15W 40 OIL
Failure to comply may 1310 0356 38
CAUTION
Coolant must meet ASTM D6210 or
ASTM D6211 specifications.
Incorrect coolant will result in engine
and radiator damage.
Refer to instruction manual.
131 0 0356 95
38 1310 3011 74
18. Decals
Ref Part Number Qty Name Remarks
1310 3011 74 39
1
7
9
10
11
40 1310 3011 74
19. Air Receiver
Ref Part Number Qty Name Remarks
1310 3011 74 41
42 1310 3011 74
20. Unloader Valve
Ref Part Number Qty Name Remarks
1310 3011 74 43
44 1310 3011 74
21. Actuating Valve Assembly
Ref Part Number Qty Name Remarks
1310 3011 74 45
3
46 1310 3011 74
22. Air Receiver Service Kit
Ref Part Number Qty Name Remarks
1310 3011 74 47
48 1310 3011 74
23. Unloader Valve Service Kit
Ref Part Number Qty Name Remarks
1310 3011 74 49
50 1310 3011 74
24. Speed Regulator Service Kit
Ref Part Number Qty Name Remarks
1310 3011 74 51
SERVICE KIT
250/750 HOUR
2 3
SERVICE KIT
500 HOUR
2
OIL ANALYSIS KIT
4 (RECOMMENDED EVERY
3
500 HOURS)
5
6
SERVICE KIT
1000 HOUR
8
2 4
10
1 3
10
5
6
52 1310 3011 74
25. Maintenance Kits
Ref Part Number Qty Name Remarks
1310 3011 74 53