Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Km.

21 West Service Road corner Villonco Road


Sucat, Muntinlupa City, Philippines 1770
Tel. Nos.: (632) 842-0860/61, Fax No.: (632) 809-0404
Website: http//www.desco.ph

DESCO RIG 1 INVENTORY


GE FAILING STRATMASTER MODEL 90

DRAWWORKS: GE Failing Stratmaster Model 90, 16,000 lbs


Single Line Pull “Foster” Catheads Pneumatic
make-up and breakout unit, Double drum 7/8”
drilling line Sandline 5/8” line mounted on
Double Axle Rig trailer carrier, air operated
Driller console & crown-o-matic, Tire 10x 20 unit
leveled by Hydraulic jack.

COMPOUND: Allison T6-609 Torqmatic Three (3) speed


forward one (1) reverse shifts up and down
under load, ALLISON Torque Converter Twin
disk clutches, Parkerburg Mechanical Brake, 32”
x 9” Double. Mounted on double axle trailer.

DRAWWORKS ENGINE: GM Detroit Diesel Engine 8V-71 , 230 HP at


1800 RPM

ROTARY TABLE: 16” Opening through table, Failing oil bath type
spiral bevel gears, (Enel Okla, Failing company)

RIG LIGHTING: Appleton Explosion Proof, 8 Appleton Flood


lights 12 Halogen Floodlights 500 W with various
outlets (110 V)

MAST: LEE C. MOORE, 83 ft, trailer mounted 100,000


lbs hook load capacity, with racking monkey
board and tong counterweight. ABS Load
Testing - Applied Load - 92,000 lbs dated
December 11, 2002

CROWN BLOCK: LEE C. MOORE 3 sheaves, 24” OD grooved for


7/8” drilling line & 1 sheave, 24” OD grooved for
5/8” sandline

TRAVELING BLOCK: McKissick 20” Triple Sheave for 7/8” drilling line
with hook Web Wilson 40 tons

SWIVEL: Gray Tool 544A, Type C CV233

KELLY DRIVE: Varco 4 KRP Square Drive with roller to suit


3-1/2” Square Kelly

KELLY: 3-1/2” Square Kelly x 41 ft. 6 5/8” Reg Box


LH x 3-1/2” IF Pin , 3-1/2 “ AF
Km. 21 West Service Road corner Villonco Road
Sucat, Muntinlupa City, Philippines 1770
Tel. Nos.: (632) 842-0860/61, Fax No.: (632) 809-0404
Website: http//www.desco.ph

DRILL PIPE: 184 jts x 2-3/8” OD Drill Pipe , 6.65 ppf , Range 1
Grade G-105 , 2-3/8 IF Pin x Box Connection

DRILL COLLAR: 18 jts x 3-1/2” OD Slick Drill Collar x 1-1/2” ID x


30 ft. , 2-7/8” PAC Pin & Box Connection

INSTRUMENTS AND INDICATORS: a. Weight Indicator, Martin Decker Clipper A


A15 & Sealtite, Range 125,000 lbs.
b. Tong Torque, Martin Decker 0 - 20,000 lbs.
c. Pressure Gauge, Martin Decker Type D
3,000 psi

DOG HOUSE: Steel Construction, skid-mounted on rig floor,


6’ L x 4’ W x 8’ H

CATWALK: Pipe Construction 41’ L x 5’5” W x 4’ 6” H

You might also like