Professional Documents
Culture Documents
Manual Loop 1590 PDF
Manual Loop 1590 PDF
FE1-10/100BASE-T
Interface Converter
USER’S MANUAL
Tel:(022)87894027 87894033
Fax:(022)87890344
Web-site:www.loopworld.com.cn
24 Tel:(022)89881024
Version:V2.0
Catalogue
1 Product Description
2 Product Features
3 Panel Illustration
4 Product Illustration
1. LEDS Indication
LOOP-E product series provide an economic solution to E1 network access cost, and
support FE1-to-10/100Base-T Bridge. The FE1-to-10/100Base-T Bridge supports fractional
or clear channel (32 DS0 channel) E1 WAN port transmission with HDB3 (High Density
Bipolar 3) coding.
LOOP-E series also can provide stand-alone and rack-cards. The rack cards version is for
LOOP-C 5400 Integral Access Shelf use. The Parameters and loop-back settings via DIP
Switches are available. The Multicolor LED indicators are on the front panel.
2 Product Features
E1 Interface
Line rate 2.048 Mbps ± 50 ppm
Line code HDB3
Input signal ITU G.703
Jitter ITU G.823
Framing ITU G.704
Connector 75ΩBNC/120Ω RJ45C (optional)
Bridge Interface
Data port Single Ethernet port
Physical port 802.3 10BaseT, 802.3u 100BaseTX
Self-adaptive
Connector RJ45
Bridge Function
Physical/Electrical Features
Dimensions Stand-alone:20x14x4.2cm
Power AC:165-240V DC: -48V
Temperature 0-50ºc
Humidity 0-95% (non-condensing)
3 Panel Illustration
1.Front Panel (Stand-alone)
2.Rear Panel (Stand-alone)
4. Product Illustration
1.LEDS Indication
LED Colors Illustration Indicator
POWER Green Power Bright
LOF Red Loss of E1Frame Dark
LOS Red Loss of E1Signal Dark
RAI Yellow E1 Remote Alarm Dark
CRC Red Redundancy Dark
Check-out Indicator
AIS Yellow E1 Alarm Dark
LINK Green Ethernet Indicator Bright
RxD Green Receive Data Flashing
TxD Green Transmit Data Flashing
FDX Green Full-Duplex Indicator Bright
COL Yellow Data Collision Dark