Professional Documents
Culture Documents
Threadlocker-User-Guide (1) PDF PDF
Threadlocker-User-Guide (1) PDF PDF
Threadlocker-User-Guide (1) PDF PDF
THREADED FASTENERS
Functions of a threaded assembly 3
Why do threaded assemblies fail? 3
LOCKING METHODS
Shortcomings of locking devices 4
Why use LOCTITE threadlockers? 4
®
For your local LOCTITE® Adhesives and Sealants Specialist, the nearest authorized
LOCTITE® products distributor, to place an order, to arrange an in-plant seminar
or for technical product assistance, call 1.800.LOCTITE (562.8483) in the U.S.A., or
call 1.800.263.5043 within Canada.
Threadlocking User’s Guide | 2
THREADED FASTENERS
A. Gaps: In order to make the assembly B. Vibration and side-to-side C. Expansion/contraction & loosening:
possible, nuts and bolts must have some movement: These gaps allow the Expansion and contraction can also cause side-to-side
tolerance, which creates gaps between parts to move from side-to-side movement. This, in addition to vibration, leads to
the threads. when exposed to vibration. loosening and ultimately disassembly of parts.
Parts tolerance. Vibration and loosening. Stretching of the bolt beyond its yield point and thermal expansion/
contraction of parts lead to lack of structural rigidity and relaxation of parts.
LOCKING METHODS
Split ring or spring washers Tab washers, split pins, castle nuts
Increased friction reduces clamp load; will Expensive and time-consuming methods,
not ensure reliable threadlocking under they often impose challenges to line up
dynamic loads. their components appropriately (i.e., tabs,
cotter pins).
IMPORTANT:
To achieve optimum
performance, all parts
must be clean and free
of contaminants
(e.g., oil, grease).
For through-holes. For blind holes. For post-assembly. For overhead applications. For pre-applied applications.
Dispensing Options
For maximum convenience and productivity,
LOCTITE® threadlockers can be dispensed
Push-close
(
(
Pull-open through LOCTITE® dispensing systems. For more
information, visit www.equipment.loctite.com.
Viscosity
•• Liquid Formulas: Everyday assembly; ideal for fine threads and blind holes
•• Semisolid Formulas: Pocket-friendly, ideal for overhead applications
Liquid.
•• Tape Formula: Pocket-friendly; controlled application; can be pre-applied several days
before assembly.
Application Methods
•• Pre-applied: QuickTape® threadlocker can be applied beforehand on bolts that are
waiting to be assembled.
Semi-Solid.
•• Pre-assembly: Most LOCTITE® liquid threadlockers are designed to be applied at the
moment that parts will be assembled.
•• Post-assembly: Wicking grade formula can be applied on parts that are
already assembled.
Wicking Grade
Low Strength What strength do you require? What strength do you require? High Lubricity – Black
LOCTITE® 425™ LOCTITE® 220™ LOCTITE® 290™ LOCTITE® 2422™ LOCTITE® 2620™ LOCTITE® 2047™
Solution
Assure™ Threadlocker Threadlocker Threadlocker Threadlocker Threadlocker
Fastener
Small fasteners up to ¼" #2 to ½" ½" to ¾" ½" to ¾" > 7⁄8"
Size
Cure
1.5 min. / 24 hrs. 6 min. / 24 hrs. 20 min. / 24 hrs. 90 min. / 24 hrs. 30 min. / 24 hrs. 90 min. / 24 hrs.
Timea
Temp.c 180ºF (80ºC) 300ºF (150ºC) 300ºF (150ºC) 650ºF (340ºC) 650ºF (340ºC) 300ºF (150ºC)
LOCTITE® 425™ LOCTITE® 220™ LOCTITE® 290™ LOCTITE® 2422™ LOCTITE® 2620™ LOCTITE® 2047™
Product Assure™ Instant Threadlocker – Threadlocker – Threadlocker – Threadlocker – Threadlocker –
Details Adhesive Low Strength / High Strength / High Temp / High Temp / High Lubricity /
Low strength, fast surface- Wicking / Blue Wicking / Green Medium Strength High Strength High Strength
curing threadlocker for A low viscosity Recommended for locking Recommended for Recommended for Recommended for
plastic fasteners. Can be threadlocking adhesive pre-assembled fasteners, locking fasteners that are locking fasteners that fasteners over 7⁄8" (22 mm).
used as a tamper-proofing that allows the product to i.e., instrumentation screws, exposed to temperatures are exposed to Formulated with increased
agent for the head of wick along the threads of electrical connectors and up to 650°F (340°C). temperatures up lubricity to reduce friction and
screws. Can be applied preassembled fasteners. set screws. Also seals Removable with hand to 650°F (340°C). allow proper clamp load to
before or after assembly. Perfect for fasteners up to porosities in welds and tools. Recommended for be achieved. Ideal for locking
¼" diameter (6 mm). metal parts. locking fasteners fasteners permanently.
permanently.
a CURE TIME (fixture time in min./full strength in hrs). Typical value @ 70°F (21°C) b TORQUE values in in.-lbs. (breakaway/prevailing torque) b1 BREAKLOOSE VALUE c TEMPERATURE resistance for continuous service
Threadlocking User’s Guide | 8
Liquid Product Liquid Product Tape Product Semisolid Product Liquid Product Semisolid Product
LOCTITE® 222™ LOCTITE® 243™ LOCTITE® QuickTape® NEW LOCTITE® 248™ LOCTITE® 263™ NEW LOCTITE® 268™
Threadlocker Threadlocker 249™ Threadlocker Threadlocker Stick Threadlocker Threadlocker Stick
10 min. / 24 hrs. 10 min. / 24 hrs. 30 min. / 24 hrs. 5 min. / 24 hrs. 10 min. / 24 hrs. 5 min. / 24 hrs.
300ºF (150ºC) 360ºF (180ºC) 300ºF (150ºC) 300ºF (150ºC) 360ºF (150ºC) 300ºF (150ºC)
LOCTITE® 222™ LOCTITE® 243™ LOCTITE® LOCTITE® 248™ LOCTITE® 263™ LOCTITE® 268™
Threadlocker – Threadlocker – QuickTape® 249™ Threadlocker Stick – Threadlocker – Threadlocker Stick –
Low Strength Medium Strength/ Threadlocking Tape Medium Strength/ High Strength/ High Strength/
Recommended for low Primerless The one and only threadlocker Primerless Primerless Primerless
strength threadlocking Versatile, medium strength in a tape form. This Semisolid stick form is Versatile, high-strength, liquid Semisolid stick form is
of adjustment screws, liquid threadlocker. Reliably revolutionary medium- convenient, portable and great threadlocker. Reliably locks and convenient, portable and great
countersunk head screws and locks and seals metal strength threadlocking for hard-to-reach applications. seals metal fasteners up to 1” for hard-to-reach applications.
set screws; on collars, pulleys, fasteners up to ¾" (19 mm). adhesive is removable with General purpose threadlocker (25 mm). Engineered to cure Its high strength makes it
tool holders and controllers. Engineered to cure consistently hand tools, and offers the for fasteners between 1/4” consistently on a variety of well-suited for heavy-duty
Also for low-strength metals, on a variety of metals, despite same reliability as traditional and 3/4” (6mm to 19mm). metals, despite minor surface applications of threaded
such as aluminum or brass. minor surface contaminants. LOCTITE® removable- grade New formula bonds through contaminants. Works on steel, fasteners up to 3/4” (19mm).
Also available in LOCTITE® Works on steel, stainless steel threadlocking liquids. contaminants and cures stainless steel and most plated New formula bonds through
222MS™ version which carries and most plated fasteners. Convenient, durable package on metal without primer. fasteners. Tolerates thread contaminants and cures on
Mil-Spec (S-46163A) Tolerates thread lubrication, is a must for every toolbox. Removable with hand tools. lubrication, anticorrosion and metal without primer. Heat
Type II, Grade M. NSF P1. anti-corrosion and protection LOCTITE® QuickTape® 249™ protection fluids. Rated for required for removal.
fluids. Rated for 360°F is easy to apply and can be 360°F (180°C). Heat required
(180°C). preapplied for future assembly. for removal.
9 | Threadlocking User’s Guide
Loctite
LOCTITE ® ®
Innovations
THREADLOCKING INNOVATIONS
Small 222™ q 21463 10 ml bottle Small screws 1,200/5,000 -65°F to Fixture – 10 min.
LOW
General 243™ 3
q
1330255
1329837
0.5 ml capsule
10 ml bottle 1/4” to 3/4” bolts,
1,300/3,000 -65°F to Fixture – 10 min. NSF™/ANSI 61,
Purpose/ 1329467 50 ml bottle Blue primerless, medium strength
Thixotropic
106/26
360°F Full – 24 hrs. CFIA Listed
Primerless 1329505 250 ml bottle
1330333 1 liter bottle
REMOVABLE STRENGTH
General 263™ 3
q
1330582
1330583
0.5 ml capsule
10 ml bottle Primerless, -65°F to Fixture – 10 min. NSF™/ANSI 61,
Purpose/ 1330585 50 ml bottle Red
high strength
400/600 275/290
360°F Full – 24 hrs. CFIA
Primerless 1330335 250 ml bottle
1330334 1 liter bottle
General Up to 3⁄4" bolts, overhead,
268™ 37685 9 g stick -65°F to Fixture – 5 min.
Purpose NEW 37686 19 g stick Red pre-dispensed, hard-to- Semisolid 311*/83
300°F Full – 24 hrs.
CFIA
Semisolid Stick reach areas, primerless
HIGH STRENGTH
General
290™ 3
q 29005
29021
0.5 ml capsule
10 ml bottle Medium/high strength.
-65°F to Fixture – 20 min.
MIL-S-46163A for
existing designs,
29031 50 ml bottle Green Wicking grade for 25/55 90/260 ASTM D-5363**,
Purpose 29041 250 ml bottle 300°F Full – 24 hrs. NSF™/ANSI 61,
pre-assembled parts
29043 1 liter bottle NSF™ P1, CFIA
For small metal and plastic
PLASTIC
Processing
LOW SULFUR COMPLIANT
2046™ Strengthening/coupling
Equipment -65°F to Fixture – 90 min.
FOOD
1186840 12 ml syringe Blue agent for joints on Gel 111/60 FDA 21 C.F.R. 175.300
That Can 400°F Full Cure – 24 hrs.
Contact Food equipment
LOW HALOGEN/
2700 NA 1526123 50 ml bottle 250 High strength up to 3/4" 5,000 -65°F to Fixture - 5 min.
High Strength 1526565 ml bottle Red
bolts Thixotropic
300/265
300°F Full - 24 hrs.
N/A
*Breakloose value †See TDS for spindle and speed test measurement **For new designs 3 Top choice product
q
LOCTITE® Primers Properties Chart ‡M10 and/or 3/8 x 16 steel fasteners Worldwide availability
PACKAGE PHYSICAL
PRODUCT ITEM NO. ON-PART LIFE DRY TIME AGENCY APPROVALS
TYPE & SIZE PROPERTY
19269 1.75 fl. oz. glass bottle
SOLVENT-
www.henkelna.com/threadlockers
Except as otherwise noted, all marks used are trademarks and/or registered trademarks of Henkel and/or its affiliates in the U.S. and elsewhere. Inconel and Monel are
trademarks of Huntington Alloys Corporation. Kovar is a trademark of CRS Holdings, Inc. ABS is a service mark of American Bureau of Shipping. NSF is a trademark of NSF
International. UL is a trademark of Underwriters Laboratories Inc. © 2013 Henkel Corporation. All rights reserved. 11656/LT-4985 (12/13)