Professional Documents
Culture Documents
01 End of Barrel
01 End of Barrel
01 End of Barrel
2 www.EMI corp.com
Injection Molding Supplies
Introduction to End-of-Barrel
• Constructed for long, reliable service • Long life and precision fit • Minimize cycle times
• Stainless steel braid, sizes up to 1½" x 1' • ¼" diameter • Faster fill rates for high speed or large
• Larger heater band leads are heavy-duty, • Reinforced leads protect wiring part molding
reinforced fiberglass or post type • Virtually maintenance free
1-216-535-4848 3
®
Ring Valves
This is the only true 100% free-flow ring-valve in the industry! Excellent shut-off capabilities and a compression ratio of
Generous, self-cleaning flow paths minimize residence time, approximately 2:1, provide outstanding performance for more
provide excellent screw recovery rates and allow color changes than 90% of all material applications. The Control Flow is an
to be made easily. Highly polished radiused surfaces and an excellent choice for shear sensitive materials. Smooth, wide flow
exceptionally non-compressive design make it an excellent patterns and low compression allows shear-sensitive materials
choice when running shear, compression-sensitive, or fiber- to be run with ease.
filled materials.
Standard: H-13 tool steel, nitrided. Standard: H-13 tool steel, nitrided.
Optional: 440C stainless steel, CPM® 9V® tool steel, Optional: CPM 9V tool steel, stainless steel,
CPM S90V® stainless steel. or CPM S90V stainless steel.
Carbide Inserts
The extended life of this valve provides many profit-
carbide insert
boosting benefits
carbide insert
EMI has also incorporated the
inherent wear resistance of carbide
Note: While the carbide inserts protect only inserts with the premium flow
the flute area, adhesion wear (gauling) is characteristics and processing
usually very minor, resulting in less than 5% capabilities of the EMI Free Flow.
of valve replacement.
*Due to possible design limitations and the need to assure adequate material
exists for imbedding carbide inserts, please consult EMI to determine if a Free
Flow Carbide Insert Valve can be produced for your application.
4 www.EMI corp.com
Injection Molding Supplies
Ring Valves
End of Barrel
EMI’s interlocking check ring valve is a great design choice for #1 in Cushion consistency...Plastics Product Review
general-purpose material applications. Its self-cleaning flow paths
provide for quick material changes, and the ring rotates with the #1 in Integral-cavity pressure consistency
valve body to aid in reduction of any possible flute wear during #1 in Fill time consistency
processing. #2 in Plastication time consistency
H-13 is a hot work tool steel having the ability to maintain hardness The body, ring and seat are hardened to R/C 45-50
H-13 Tool Steel in high temperature atmospheres. It is therefore an excellent choice then nitrided, creating an extremely hard case of General purpose
& Nitrided as a base material for nitriding which is performed at temperatures .015"-.018" depth and a very smooth "slick-like" and filled materials.
exceeding 1000° F. surface equivalent to R/C 68+.
CPM grade 9V has a hot work steel analysis with a high carbon and
General purpose,
CPM 9V Tool vanadium content. This chemistry provides superior wear resistance
Body, ring and seat are hardened to R/C 53-56. engineered and
Steel not offered by any other specialty tool steel. CPM-9V also has
filled materials.
exceptional torsional strength required for molding.
Note: CPM, 9V, and S90V are registered trademarks of Crucible Materials Corp.
1-216-535-4848 5
Check all that apply:
®
4-Piece Ring Valve CPM® 9V® Corrosive Other:
Control Flow CPM 9V + Nitride High Speed Molding CPM S90V® (SS)
100% Free Flow Ring General Purpose Carbide Inserts
Inter-locking Valve Abrasive Shear Sensitive
Use Standard or Metric measurements. D
[________] F
E [_________________]
[_____] Thread Specifications
LH or RH
C [_______]
G [_________]
B [__________] H [________]
A [__________]
Ring Valve Order/Quote Form
Email to Sales@EMIcorp.com or fax: 216-535-4823
I
[________]
J
[____________]
K
[______________]
®
www.EMI corp.com
Oz. Capacity: Telephone:
Serial #: Fax:
Date: Quote Order Email:
End of Barrel
6
Injection Molding Supplies
End of Barrel
15mm M8 x 1.25 -RH $246 $298 N/A CALL $307 $373 N/A N/A
18mm M10 x 1.5 -RH $246 $298 CALL CALL $307 $373 CALL CALL
22mm M12 x 1.75 -RH $257 $315 CALL CALL $322 $392 CALL CALL
25mm M12 x 1.75 -RH $260 $319 CALL CALL $326 $398 CALL CALL
30mm M14 x 1.5 -RH $279 $363 CALL CALL $349 $453 CALL CALL
35mm M18 x 1.5 -RH $300 $413 CALL CALL $376 $516 $418 $454
40mm M18 x 1.5 -RH $319 $441 $419 CALL $398 $550 $432 $470
45mm M22 x 1.5 -RH $348 $518 $447 CALL $434 $649 $469 $515
50mm M24 x 1.5 -RH $380 $615 $479 CALL $474 $768 $509 $569
60mm M24 x 1.25 -RH $425 $796 $524 CALL $531 $994 $572 $663
Autojector
Control Flow & Free Flow Carbide Inserts Locking Style 4 Piece
Screw
Thread H13 CPM Control Free H13 CPM H13 CPM
Diameter
Nitrided 9V Flow Flow Nitrided 9V Nitrided 9V
C\v" ⁷⁄₁₆" - 14 $256 $314 CALL CALL $320 $391 CALL CALL
1" ¹⁄₂" - 13 $276 $340 CALL CALL $346 $425 CALL CALL
1Z\v" ⁵⁄₈" - 11 $286 $368 CALL CALL $357 $460 CALL CALL
1Z\x" C\v" - 10 $311 $427 $411 CALL $390 $534 CALL CALL
1C\v" ⁷⁄₈" - 9 $346 $511 $445 CALL $430 $641 $456 $503
2" 1" - 8 $393 $633 $494 CALL $492 $792 $500 $561
2½" 1Z\v" - 7 $480 $921 $581 CALL $601 $1,151 $615 $707
1-216-535-4848 7
®
18mm M10 x 1.5 $244 $289 CALL CALL $304 $360 CALL CALL
22mm M12 x 1.5 $254 $302 CALL CALL $318 $379 CALL CALL
25mm M10 x 1.5 $265 $320 CALL CALL $331 $399 CALL CALL
30mm M13 x 1.5 $283 $361 CALL CALL $353 $452 CALL CALL
35mm M16 x 1.5 $300 $408 CALL CALL $376 $510 $418 $453
40mm M20 x 2.0 $317 $444 $417 CALL $395 $555 $433 $478
45mm M20 x 2.0 $333 $497 $434 CALL $418 $621 $453 $503
50mm M24 x 2.0 $357 $566 $457 CALL $447 $707 $474 $523
55mm M24 x 2.0 $390 $664 $490 CALL $486 $830 $511 $570
60mm M24 x 2.0 $442 $794 $542 CALL $553 $992 $603 $693
65mm M24 x 2.0 $472 $861 $572 CALL $590 $1,076 $634 $745
70mm M40 x 2.0 $514 $984 $615 CALL $643 $1,230 $686 $800
75mm M30 x 3.5 $556 $1,140 $656 CALL $695 $1,425 $751 $889
85mm M30 x 2.0 $653 $1,427 $753 CALL $816 $1,783 $867 $1,063
90mm M40 x 2.0 $636 $1,439 $736 CALL $796 $1,798 $840 $1,019
100mm M60 x 1.5 $758 $1,888 $888 CALL $949 $2,360 $992 $1,236
125mm M60 x 2.5 $1,122 $3,215 $1,250 CALL $1,402 $4,019 $1,410 $1,844
130mm M60 x 2.0 $1,245 $3,368 $1,364 CALL $1,555 $4,208 $1,447 $1,831
140mm M60 x 2.5 $1,435 $4,243 $1,556 CALL $1,792 $5,302 $1,706 $2,357
150mm M65 x 2.5 $1,621 $5,116 $1,750 CALL $2,027 $6,395 $1,967 $2,669
170mm M75 x 2.5 $2,196 CALL $2,324 CALL CALL CALL $2,594 CALL
Boy
Control Flow & Free Flow Carbide Inserts Locking Style 4 Piece
Screw
Thread H13 CPM Control Free H13 CPM H13 CPM
Diameter
Nitrided 9V Flow Flow Nitrided 9V Nitrided 9V
14mm M8 x 1.5 $240 $283 CALL CALL $299 $353 N/A N/A
16mm M8 x 1.5 $240 $283 CALL CALL $299 $353 CALL CALL
18mm M10 x 1.5 $242 $285 CALL CALL $302 $356 CALL CALL
22mm M10 x 1.5 $250 $297 CALL CALL $314 $371 CALL CALL
24mm M12 x 1.75 $255 $303 CALL CALL $319 $380 CALL CALL
28mm M12 x 1.75 $268 $336 CALL CALL $335 $421 CALL CALL
32mm M14 x 2.0 $277 $346 CALL CALL $347 $430 CALL CALL
36mm M16 x 2.0 $292 $382 $392 CALL $365 $477 $408 $442
38mm M16 x 2.0 $292 $382 $392 CALL $365 $477 $409 $442
42mm M16 x 2.0 $307 $427 $407 CALL $384 $534 $432 $471
48mm M18 x 2.5 $335 $505 $436 CALL $420 $631 $473 $523
As a supplier to the plastics industry since 1968, EMI has an • Beloit • Impco • Reed
extensive knowledge of components you may consider "difficult • Egan • Jaco • Stubbe
to find" elsewhere. If your company still operates some vintage • Farrel • Lester • TMC
equipment, give us a call! We may be able to offer assistance • Fellows • Lombard
on the following makes:
8 www.EMI corp.com
Injection Molding Supplies
End of Barrel
1B\zn" B\," - 11 $291 $382 CALL CALL $363 $477 CALL CALL
1B\," ³⁄₄" - 10 $309 $429 $404 CALL $386 $536 $429 $476
1C\v" ³⁄₄" - 16 (fine) $327 $477 $422 CALL $409 $597 $458 $505
1C\v" ⁷⁄₈" - 9 CALL
2" 1" - 8 $350 $538 $445 CALL $438 $672 $473 $530
2Z\v" 1" - 8 $391 $656 $486 CALL $488 $821 $534 $609
2Z\x" 1Z\v" - 12 (fine) $441 $791 $539 CALL $550 $988 $581 $668
2Z\x" 1Z\v" - 7 (coarse) $441 $791 $539 CALL $550 $988 $581 $668
2C\v" 1Z\v" - 12 (fine) $477 $906 $576 CALL $597 $1,133 $639 $744
2C\v" 1Z\v" - 7 (coarse) $477 $906 $576 CALL $597 $1,133 $639 $744
3Z\v" 1Z\x" - 12 (fine) $591 $1,250 $692 CALL $739 $1,561 $772 $925
3Z\v" 1Z\x" - 6 (coarse) $591 $1,250 $692 CALL $739 $1,561 $772 $925
3Z\x" 1Z\x" - 12 (fine) $660 $1,451 $765 CALL $826 $1,814 $861 $1,039
3Z\x" 1Z\x" - 6 (coarse) $660 $1,451 $765 CALL $826 $1,814 $861 $1,039
3Z\x" 1C\v" - 6 (coarse) $660 $1,451 $765 CALL $826 $1,814 $861 $1,039
4Z\x" 2" - 12 (fine) $948 $2,458 $1,058 CALL $1,185 $3,073 $1,220 $1,551
4Z\x" 2" - 6 (coarse) $948 $2,458 $1,058 CALL $1,185 $3,073 $1,220 $1,551
5Z\v" 2Z\v" - 12 (fine) $1,264 $3,563 $1,380 CALL $1,580 $4,453 $1,623 $2,154
5Z\v" 2Z\v" - 6 (fine) $1,264 $3,563 $1,380 CALL $1,580 $4,453 $1,623 $2,154
6" 2Z\x" - 6 (coarse) $1,616 $5,059 $1,740 CALL $2,020 $6,323 $2,163 $2,958
8" 3Z\x" - 6 (coarse) $3,219 CALL CALL CALL $4,024 CALL $3,959 CALL
18mm M8 x 1.25 $242 $288 CALL CALL $302 $358 CALL CALL
20mm M10 x 1.5 $246 $293 CALL CALL $307 $366 CALL CALL
22mm M10 x 1.5 CALL
24mm M10 x 1.5 $255 $306 CALL CALL $319 $382 CALL CALL
28mm M12 x 1.75 $263 $319 CALL CALL $328 $398 CALL CALL
32mm M18 x 2.5 $284 $364 CALL CALL $355 $454 CALL CALL
35mm M18 x 2.5 $297 $406 CALL CALL $371 $507 $408 $442
36mm M20 x 2.5 $302 $411 $397 CALL $379 $515 $411 $447
40mm M20 x 2.5 $307 $420 $409 CALL $384 $525 $415 $448
42mm M22 x 2.5 $315 $466 $403 CALL $392 $582 $433 $476
45mm M22 x 2.5 $332 $489 $428 CALL $416 $611 $446 $493
50mm M24 x 3.0 $360 $589 $456 CALL $451 $736 $495 $550
55mm M24 x 3.0 $397 $691 $496 CALL $497 $864 $533 $607
60mm M27 x 3.0 $425 $796 $524 CALL $531 $994 $572 $663
65mm M30 x 3.5 $441 $798 $539 CALL $550 $998 $578 $653
70mm M36 x 4.0 $507 $1,015 $608 CALL $634 $1,269 $646 $760
80mm M42 x 4.5 $579 $1,289 $681 CALL $724 $1,610 $739 $899
90mm M48 x 5.0 $726 $1,689 $833 CALL $908 $2,110 $854 $1,049
100mm M52 x 5.0 $847 $2,121 $957 CALL $1,059 $2,651 $977 $1,239
110mm M56 x 5.5 $1,143 $3,009 $1,259 CALL $1,428 $3,761 $1,342 $1,682
125mm M64 x 6.0 $1,245 $3,368 $1,364 CALL $1,555 $4,208 $1,447 $1,831
140mm M72 x 6.0 $1,616 $$3,776 $2,057 CALL $1,700 $4,717 $1,566 $1,565
160mm M80 x 6.0 $2,418 CALL $2,523 CALL $1,835 CALL $1,789 CALL
180mm M90 x 6.0
1-216-535-4848 9
®
18mm M8 x 1.25 $246 $298 N/A CALL $307 $373 N/A N/A
22mm M10 x 1.5 $250 $300 CALL CALL $314 $376 CALL CALL
25mm M10 x 1.5 $258 $309 CALL CALL $323 $386 CALL CALL
28mm M12 x 1.75 $269 $340 CALL CALL $336 $425 CALL CALL
30mm M12 x 1.75 $271 $338 CALL CALL $338 $423 CALL CALL
32mm M14 X 2.0 $280 $374 CALL CALL $351 $468 $466 $427
38mm M16 x 2.0 $328 $469 $428 CALL $410 $586 $439 $473
40mm M16 x 2.0 $354 $543 $454 CALL $443 $679 $467 $508
45mm TR20 x 3.0 $380 $585 $479 CALL $474 $732 $484 $529
52mm TR22 x 3.0 $429 $709 $530 CALL $536 $886 $530 $581
60mm TR27 x 3.0 $473 $871 $573 CALL $592 $1,090 $590 $675
70mm TR40 X 3.0 $579 $1,202 $680 CALL $724 $1,504 $695 $800
82mm TR35 x 3.0 $739 $1,709 $838 CALL $922 $2,136 $849 $1,001
110mm TR50 x 3.0 $1,016 $2,760 $1,128 CALL $1,271 $3,450 $1,255 $1,606
120mm TR60 x 3.0 $1,381 $4,265 $1,506 CALL $1,740 $5,345 $1,620 $2,248
145mm TR65 x 4.0 $2,061 $6,768 $2,205 CALL $2,578 $8,460 $2,130 $3,084
Engel
Control Flow & Free Flow Carbide Inserts Locking Style 4 Piece
Screw
Thread H13 CPM Control Free H13 CPM H13 CPM
Diameter
Nitrided 9V Flow Flow Nitrided 9V Nitrided 9V
18mm M10 x 1.5 -RH $244 $290 CALL CALL $304 $361 CALL CALL
22mm M12 x 1.75 -RH $250 $297 CALL CALL $314 $371 CALL CALL
25mm M12 x 1.75 -RH $257 $308 CALL CALL $322 $385 CALL CALL
30mm M12 x 1.75 -RH $272 $348 CALL CALL $339 $434 CALL CALL
35mm M12 x 1.75 -RH $294 $401 CALL CALL $367 $502 $417 $456
40mm M16 x 2.0 -RH $301 $405 $401 CALL $377 $506 $422 $456
45mm M20 x 2.5-RH $323 $464 $423 CALL $404 $578 $424 $466
50mm M24 x 3.0 -RH $350 $524 $449 CALL $438 $654 $477 $528
55mm M24 x 3.0 -RH $374 $603 $474 CALL $468 $753 $505 $567
60mm M30 x 3.5 -RH $393 $655 $494 CALL $492 $820 $520 $595
65mm M32 x 3.0 -RH $421 $739 $520 CALL $526 $922 $550 $627
70mm M36 x 4.0 -RH $456 $842 $556 CALL $570 $1,053 $585 $681
80mm M36 x 4.0 -RH $554 $1,159 $654 CALL $693 $1,450 $722 $873
85mm M42 x 4.5 -RH $601 $1,352 $701 CALL $751 $1,691 $756 $943
90mm M42 x 4.5 -RH $653 $1,427 $753 CALL $816 $1,783 $867 $1,063
95mm M42 x 4.5 -RH $714 $1,753 $814 CALL $892 $2,192 $875 $1,100
105mm M42 x 4.5 -RH $859 $2,307 $986 CALL $1,074 $2,883 $1,036 $1,340
120mm M54 x 2.0 -RH $1,079 $3,086 $1,208 CALL $1,349 $3,857 $1,258 $1,669
135mm M64 x 2.0 -RH $1,401 $4,327 $1,529 CALL $1,754 $5,408 $1,581 $2,167
150mm M64 x 6.0 -RH $1,727 $5,568 $1,855 CALL $2,159 $6,959 $1,904 $2,665
170mm M64 x 6.0 -RH $2,192 CALL $2,320 CALL $2,265 CALL $2,590 CALL
10 www.EMI corp.com
Injection Molding Supplies
End of Barrel
1Z\," Z\x" - 20 $276 $353 CALL CALL $346 $442 CALL CALL
1C\," B\," - 11 $294 $396 CALL CALL $367 $496 $411 $447
1Z\x" B\," - 11 $301 $417 $401 CALL $377 $520 $426 $464
1B\," C\v" - 16 $332 $488 $432 CALL $415 $609 $503 $501
1C\v" C\v" - 10 $321 $459 $421 CALL $400 $574 $451 $490
2" ⁷\," - 9 $344 $516 $443 CALL $428 $646 $469 $516
2Z\v" 1" - 8 $376 $623 $476 CALL $471 $779 $504 $571
2B\zn" 1" - 8 $432 $730 $532 CALL $540 $913 $550 $635
2Z\x" 1Z\," - 7 $388 $631 $488 CALL $483 $790 $520 $591
3" 1B\," - 6 $479 $923 $579 CALL $599 $1,153 $605 $703
3Z\x" 1C\v" - 6 $588 $1,239 $688 CALL $734 $1,548 $711 $834
4" 2" - 6 $716 $1,654 $843 CALL $895 $2,067 $892 $1,095
4Z\x" 2Z\v" - 6 $836 $2,107 $965 CALL $1,046 $2,632 $1,051 $1,317
5¹⁄₄" 2C\v" - 6 $1,196 $3,368 1,227 CALL $1,495 $4,208 $1,443 $1,842
6" 3" - 6 $1,433 $4,256 1,446 CALL $1,792 $5,321 $1,705 $2,259
Husky
Control Flow & Free Flow Carbide Inserts Locking Style 4 Piece
Screw
Thread H13 CPM Control Free H13 CPM H13 CPM
Diameter
Nitrided 9V Flow Flow Nitrided 9V Nitrided 9V
25mm M12 x 1.75 $257 CALL CALL CALL CALL CALL CALL CALL
30mm M14 x 2.0 $279 $358 CALL CALL $349 415 CALL $421
32mm M14 x 2.0 $286 CALL CALL CALL CALL CALL CALL CALL
35mm M18 x 2.0 $299 CALL CALL CALL CALL CALL $395 CALL
42mm M20.x 2.5 $331 CALL $432 CALL CALL CALL $435 CALL
46mm M20.x 2.5 $353 CALL $453 CALL CALL CALL $463 CALL
50mm M26 x 3.0 $373 CALL $473 CALL CALL CALL $472 CALL
60mm M30 x 3.5 $445 CALL $545 CALL CALL CALL CALL CALL
70mm M36 x 4.0 $520 CALL $621 CALL CALL CALL CALL CALL
80mm M42 x 4.5 $623 CALL $718 CALL CALL CALL CALL CALL
85mm M42 x 4.5 $679 CALL $779 CALL CALL CALL CALL CALL
90mm M45 x 4.5 $767 CALL $897 CALL CALL CALL CALL CALL
100mm M52 x 5.0 $904 CALL $1,033 CALL CALL CALL CALL CALL
110mm M52 x 5.0 $1,039 CALL $1,166 CALL CALL CALL CALL CALL
115mm M60 x 5.5 $1,157 CALL $1,285 CALL CALL CALL CALL CALL
120mm M64 x 6.0 $1,272 CALL $1,400 CALL CALL CALL CALL CALL
125mm M64 x 6.0 $1,376 CALL $1,505 CALL CALL CALL CALL CALL
140mm M72 x 6.0 $1,791 CALL $1,918 CALL CALL CALL CALL CALL
145mm M72 x 6.0 $1,878 CALL $2,006 CALL CALL CALL CALL CALL
155mm M72 x 6.0 $2,209 CALL $2,339 CALL CALL CALL CALL CALL
160mm M85 x 6.0 $2,323 CALL $2,450 CALL CALL CALL CALL CALL
175mm M90 X 6.0 $2,915 CALL $3,043 CALL CALL CALL CALL CALL
1-216-535-4848 11
®
20mm M10 x 1.5 $257 $315 CALL CALL $322 $392 CALL CALL
25mm M12 x 1.75 $265 $327 CALL CALL $331 $409 CALL CALL
28mm M16 x 2.0 $279 $367 CALL CALL $349 $458 CALL CALL
32mm M18 x 2.5 $291 $386 CALL CALL $363 $482 CALL CALL
35mm TR20 x 3.0 $317 $455 CALL CALL $395 $569 $416 $451
40mm TR22 x 3.0 $327 $479 $427 CALL $409 $599 $429 $468
45mm TR27 x 3.0 $347 $542 $446 CALL $433 $678 $446 $489
46mm TR24 x 3.0 $360 $606 $460 CALL $451 $757 $466 $515
51mm TR27 x 3.0 $396 $684 $497 CALL $496 $856 $499 $549
53mm TR28 x 3.0 $432 $761 $532 CALL $540 $951 $524 $592
58mm M36 x 3.0 $459 $866 $560 CALL $574 $1,082 $531 $597
60mm TR55 x 3.0 $488 $980 $588 CALL $608 $1,225 $555 $632
66mm TR38 x 3.0 $528 $1,057 $627 CALL $659 $1,321 $575 $654
68mm TR40 x 3.0 $569 $1,227 $669 CALL $711 $1,534 $620 $716
72mm TR40 x 3.0 $616 $1,338 $716 CALL $770 $1,672 $678 $778
76mm TR40 x 3.0 $649 $1,534 $749 CALL $810 $1,917 $739 $858
84mm TR47 x 3.0 $788 $2,073 $889 CALL $984 $2,590 $861 $1,030
86mm $893 $2,601 $993 CALL $1,117 $3,252 $971 $1,190
100mm $1,059 $2,996 $1,188 CALL $1,325 $3,745 $1,081 $1,320
Kawaguchi
Control Flow & Free Flow Carbide Inserts Locking Style 4 Piece
Screw
Thread H13 CPM Control Free H13 CPM H13 CPM
Diameter
Nitrided 9V Flow Flow Nitrided 9V Nitrided 9V
25mm TR13 x 2.0 $261 $318 CALL CALL $327 $396 CALL CALL
27mm M14 x 2.0 $275 $355 CALL CALL $344 $444 CALL CALL
28mm M15 x 1.5 $273 $351 CALL CALL $341 $439 CALL CALL
30mm M16 x 1.5 $283 $367 CALL CALL $353 $458 CALL CALL
32mm M16 x 1.5 $286 $373 CALL CALL $357 $467 CALL CALL
34mm M18 x 2.0 $301 $420 CALL CALL $377 $525 CALL CALL
35mm M20 x 2.0 $304 $426 CALL CALL $381 $533 $417 $452
36mm M20 x 2.0 $308 $432 $408 CALL $385 $540 $420 $455
37mm TR20 x 2.0 $315 $443 $415 CALL $392 $554 $426 $464
40mm TR20 x 2.0 $327 $514 $427 CALL $409 $643 $463 $507
42mm TR24 x 3.0 $333 $505 $434 CALL $418 $631 $444 $492
50mm TR30 x 3.0 $383 $633 $482 CALL $478 $792 $495 $554
55mm TR30 x 3.0 $422 $755 $523 CALL $527 $945 $536 $613
58mm TR34 x 4.0 $438 $783 $538 CALL $546 $979 $546 $624
63mm TR34 x 4.0 $475 $908 $575 CALL $594 $1,135 $597 $692
65mm M30 x 2.0 $433 $805 $533 CALL $541 $1,007 $567 $661
70mm TR40 x 4.0 $508 $1,007 $608 CALL $635 $1,258 $608 $703
72mm TR40 x 4.0 $564 $1,154 $663 CALL $704 $1,442 $673 $813
75mm TR40 x 4.0 $604 $1,301 $705 CALL $755 $1,626 $717 $860
80mm TR42 x 4.0 $660 $1,514 $761 CALL $826 $1,893 $792 $964
85mm M46 x 5.0 $706 $1,608 $805 CALL $882 $2,010 $799 $986
12 www.EMI corp.com
Injection Molding Supplies
End of Barrel
18mm M10 x 1.0 $261 $318 CALL CALL $327 $396 CALL CALL
34mm M16 x 2.0 $293 $382 CALL CALL $366 $477 CALL CALL
40mm M20 x 2.5 $326 $478 $426 CALL $408 $598 $451 $497
42mm M20 x 2.5 $333 $493 $434 CALL $418 $616 $455 $502
50mm M20 x 2.5 $386 $615 $486 CALL $482 $768 $505 $566
60mm M30 x 3.5 $435 $797 $535 CALL $544 $996 $575 $665
70mm M36 x 3.0 $504 $988 $604 CALL $630 $1,234 $647 $761
80mm M48 x 4.0 $676 $1,505 $776 CALL $844 $1,880 $764 $939
90mm M48 x 4.0 $796 $1,844 $896 CALL $994 $2,304 $856 $1,070
100mm M60 x 4.0 $851 $2,153 $978 CALL $1,064 $2,692 $966 $1,261
120mm M72 x 4.0 $1,361 $3,582 $1,489 CALL $1,701 $4,477 $1,291 $1,723
130mm M76 x 4.0 $1,631 $4,528 $1,759 CALL $2,040 $5,660 $1,515 $2,072
150mm M80 x 4.0 $2,223 $6,480 $2,350 CALL $2,777 $8,100 $1,954 $2,757
Krauss Maffei
Control Flow & Free Flow Carbide Inserts Locking Style 4 Piece
Screw
Thread H13 CPM Control Free H13 CPM H13 CPM
Diameter
Nitrided 9V Flow Flow Nitrided 9V Nitrided 9V
25mm M12 x 1.75 $261 $318 CALL CALL $327 $396 CALL CALL
35mm M16 x 2.0 $306 $433 CALL CALL $382 $541 $417 $448
40mm M20 x 2.5 $322 $460 $422 CALL $401 $576 $428 $464
45mm M24 x 3.0 $346 $535 $445 CALL $430 $669 $454 $496
55mm M35 x 3.5 $429 $798 $557 CALL $543 $1,020 $547 $627
60mm M33 x 3.5 $457 $891 $557 CALL $572 $1,113 $573 $659
65mm M33 x 3.0 $484 $946 $585 CALL $606 $1,182 $593 $683
70mm 1¹⁄₂" - 6 $538 $1,121 $638 CALL $672 $1,401 $647 $755
80mm M42 x 4.5 $659 $1,551 $760 CALL $825 $1,939 $768 $926
90mm M48 x 5.0 $849 $2,315 $948 CALL $1,060 $2,893 $959 $1,209
100mm M53 x 3.0 $919 $2,353 $1,046 CALL $1,148 $2,943 $993 $1,255
114mm TR55 x 4.0 $1,216 $3,454 $1,343 CALL $1,519 $4,318 $1,256 $1,615
115mm TR60 x 3.0 $1,227 $3,483 $1,356 CALL $1,534 $4,354 $1,264 $1,625
128mm $1,631 $5,028 $1,759 CALL $2,040 $6,284 $1,614 $2,146
130mm TR75 x 4.0 $1,631 $5,028 $1,759 CALL $2,040 $6,284 $1,614 $2,146
135mm TR75 x 4.0 $1,855 $5,802 $1,996 CALL $2,285 $7,250 $1,789 $2,407
146mm TR80 x 10 $2,074 $6,559 $2,201 CALL $2,592 $8,201 $1,964 $2,649
165mm TR85 x 12
As a supplier to the plastics industry since 1968, EMI has an • Beloit • Impco • Reed
extensive knowledge of components you may consider "difficult • Egan • Jaco • Stubbe
to find" elsewhere. If your company still operates some vintage • Farrel • Lester • TMC
equipment, give us a call! We may be able to offer assistance on • Fellows • Lombard
the following makes:
1-216-535-4848 13
®
Mitsubishi
Control Flow & Free Flow Carbide Inserts Locking Style 4 Piece
Screw
Thread H13 CPM Control Free H13 CPM H13 CPM
Diameter
Nitrided 9V Flow Flow Nitrided 9V Nitrided 9V
28mm M16 x 2.0 $271 $347 CALL CALL $338 $433 CALL CALL
32mm M16 x 2.0 $295 $392 CALL CALL $368 $490 CALL CALL
50mm M27 x 3.0 $399 $679 $500 CALL $500 $849 $507 $567
57mm M33 x 3.5 CALL CALL CALL CALL CALL CALL CALL CALL
62mm M36 x 4.0 $507 $1,002 $607 CALL $634 $1,252 $615 $706
70mm M39 x 4.0 $589 $1,239 $689 CALL $736 $1,548 $686 $801
80mm M45 x 4.5 $733 $1,727 $833 CALL $917 $2,159 $826 $992
90mm M48 x 5.0 $871 $2,132 $972 CALL $1,090 $2,666 $939 $1,140
105mm M56 x 5.5 $940 $2,431 $1,068 CALL $1,174 $3,038 $1,034 $1,328
120mm M60 x 5.5 $1,238 $3,522 $1,366 CALL $1,547 $4,403 $1,303 $1,700
135mm M68 x 3.0 $1,571 $4,694 $1,698 CALL $1,963 $5,868 $1,597 $2,172
150mm M76 x 6.0 $1,950 $6,024 $2,076 CALL $2,435 $7,533 $1,931 $2,708
175mm M85 x 6.0 CALL CALL CALL CALL CALL CALL CALL CALL
Natco
Control Flow & Free Flow Carbide Inserts Locking Style 4 Piece
Screw
Thread H13 CPM Control Free H13 CPM H13 CPM
Diameter
Nitrided 9V Flow Flow Nitrided 9V Nitrided 9V
1M\," 1¹⁄₈" - 7 $365 $570 $466 CALL $456 $713 $493 $544
2Z\v" 1Z\x" - 6 $422 $710 $523 CALL $514 $906 $553 $619
2Z\x" 1Z\x" - 6 $424 $748 $525 CALL $818 $1,953 $556 $628
3Z\v" 2" - 8 $675 $1,610 $775 CALL $1,307 $3,674 $764 $930
4Z\v" 2Z\v" - 12 $1,078 $3,030 $1,179 CALL $656 $1,381 $1,109 $1,432
70mm 1¹⁄₈" - 6 $541 $1,140 $642 CALL $951 $2,356 $695 $810
90mm 1Z\x" - 6 $784 $1,943 $885 CALL $1,291 $3,621 $957 $1,158
105mm 1³⁄₄" - 6 $1,066 $2,985 $1,193 CALL $1,634 $4,767 $1,249 $1,571
120mm 2" - 6 $1,347 $3,931 $1,476 CALL $1,963 $5,617 $1,447 $1,806
135mm 2Z\v" - 6 $1,618 $4,632 $1,747 CALL $2,023 $5,790 $1,752 $2,290
14 www.EMI corp.com
Injection Molding Supplies
End of Barrel
26mm M10 x 1.5 $260 $315 CALL CALL $326 $392 CALL CALL
38mm M16 x 1.5 $311 $430 $411 CALL $390 $539 $430 $469
45mm M22 x 2.0 $348 $520 $447 CALL $434 $651 $474 $520
50mm M22 x 2.0 $380 $617 $479 CALL $474 $771 $516 $576
55mm M24 x 2.0 $406 $709 $506 CALL $507 $886 $559 $632
60mm M26 x 2.0 $430 $764 $531 CALL $539 $954 $583 $673
70mm M26 x 2.0 $520 $1,046 $621 CALL $651 $1,307 $696 $811
85mm M36 x 2.0 $677 $1,543 $777 CALL $846 $1,928 $883 $1,078
100mm M60 x 5.5 $856 $2,130 $966 CALL $1,068 $2,659 $985 $1,247
Netstal
Control Flow & Free Flow Carbide Inserts Locking Style 4 Piece
Screw
Thread H13 CPM Control Free H13 CPM H13 CPM
Diameter
Nitrided 9V Flow Flow Nitrided 9V Nitrided 9V
28mm M16 x 1.5 $269 $341 CALL CALL $336 $427 CALL CALL
40mm M18 x 2.5 $321 $449 $421 CALL $400 $563 $439 $477
55mm M24 x 3.0 $417 $690 $516 CALL $520 $863 $563 $635
70mm M26 x 2.0 $500 $944 $600 CALL $625 $1,180 $676 $792
80mm M28 x 2.0 $579 $1,289 $681 CALL $724 $1,610 $739 $899
90mm M32 x 2.0 $726 $1,689 $833 CALL $908 $2,110 $854 $1,049
100mm $847 $2,121 $957 CALL $1,059 $2,651 $977 $1,239
110mm $1,143 $3,009 $1,259 CALL $1,428 $3,761 $1,342 $1,682
125mm $1,245 $3,368 $1,364 CALL $1,555 $4,208 $1,447 $1,831
EMI standard lead time for non-stock screw tips is 3–4 weeks; however, for a $199.00 premium we will provide
shipment within 10 working days* and:
• Expedited design, spec confirmation and order processing
• Preferred set-up and production scheduling
• Arrangement of high-priority heat treatment with rush transportation services
If for any reason EMI cannot ship within 10 working days, the $199.00 premium will be waived.
*In cases requiring confirmation of specifications or when a sample valve is supplied, the 10 working day period will start upon full
confirmation and signed customer approval of dimensions.
1-216-535-4848 15
®
1C\," ⁹⁄₁₆" - 18 $294 $396 CALL CALL $367 $496 $411 $447
1Z\x" C\v" - 16 $300 $407 $400 CALL $376 $509 $417 $452
1B\," C\v" - 16 $346 $492 $445 CALL $430 $614 $441 $477
1C\v" C\v" - 16 $357 $504 $457 CALL $447 $630 $448 $486
2" 1" - 8 $396 $628 $497 CALL $496 $785 $498 $557
2Z\," 1" - 8 $415 $696 $514 CALL $517 $871 $530 $604
2B\zn" 1" - 8 $440 $733 $540 CALL $549 $917 $548 $625
2Z\x" 1Z\v" - 8 $490 $885 $590 CALL $613 $1,105 $584 $677
2C\v" 1C\," - 8 $542 $1,038 $643 CALL $678 $1,297 $649 $766
3Z\v" 1Z\x" - 8 $713 $1,518 $813 CALL $891 $1,898 $784 $960
3Z\x" 1C\v" - 8 $782 $1,756 $883 CALL $978 $2,196 $861 $1,072
4Z\v" 2" - 8 $1,103 $2,764 $1,230 CALL $1,378 $3,454 $1,145 $1,489
30mm M18 x 2.5 $280 $355 CALL CALL $351 $444 CALL CALL
35mm ⁹⁄₁₆" - 18 $298 $386 CALL CALL $373 $482 $393 $429
36mm TR20 x 3.0 $301 $430 $401 CALL $377 $539 $410 $442
42mm TR27 x 3.0 $323 $484 $423 CALL $404 $606 $419 $454
45mm 3/4" - 10 $331 $488 $432 CALL $415 $608 $456 $497
55mm TR35 x 3.0 $368 $589 $469 CALL $460 $736 $464 $518
58mm M35 x 3.0 $380 $607 $479 CALL $474 $760 $470 $526
65mm TR40 x 3.0 $469 $903 $569 CALL $586 $1,129 $542 $608
70mm TR40 x 3.0 $511 $1,046 $613 CALL $641 $1,307 $575 $644
82mm TR47 x 3.0 $680 $1,627 $780 CALL $850 $2,033 $771 $923
89mm 1C\v" - 8 $775 $1,942 $874 CALL $969 $2,428 $853 $1,034
100mm TR50 x 3.0 $964 $2,629 $1,092 CALL $1,204 $3,286 $1,019 $1,269
Newbury
Control Flow & Free Flow Carbide Inserts Locking Style 4 Piece
Screw
Thread H13 CPM Control Free H13 CPM H13 CPM
Diameter
Nitrided 9V Flow Flow Nitrided 9V Nitrided 9V
1" Z\x" - 13 $257 $310 CALL CALL $322 $389 CALL CALL
1Z\v" ⁵⁄₈" - 11 $284 $361 CALL CALL $355 $452 CALL CALL
1C\," ⁵⁄₈" - 11 $294 $395 CALL CALL $367 $494 $410 $444
1Z\x" C\v" - 10 $322 $453 $422 CALL $401 $566 $434 $472
1C\v" ⁷⁄₈" - 9 $328 $477 $428 CALL $410 $597 $445 $489
2" 1" - 8 $353 $538 $453 CALL $442 $672 $474 $525
2Z\v" 1" - 8 $390 $628 $490 CALL $486 $785 $523 $578
2Z\x" 1" - 8 $449 $799 $547 CALL $559 $999 $590 $677
3½" 1½" - 12 $674 $1,464 $777 CALL $839 $1,826 $874 $1,051
3Z\v" 1Z\x" - 8 $713 $1,518 $813 CALL $891 $1,898 $784 $960
3Z\x" 1C\v" - 8 $782 $1,756 $883 CALL $978 $2,196 $861 $1,072
16 www.EMI corp.com
Injection Molding Supplies
End of Barrel
25mm M12 x 1.0 $270 $329 CALL CALL $348 $423 CALL CALL
30mm M16 x 1.5 $293 $380 CALL CALL $377 $490 CALL CALL
35mm M18 x 2.5 $301 $410 CALL CALL $388 $528 $414 $449
40mm M20 x 2.5 $321 $453 $421 CALL $414 $584 $438 $482
45mm M24 x 3.0 $348 $514 $448 CALL $448 $661 $463 $510
52mm M27 x 3.0 $386 $615 $486 CALL $498 $792 $502 $564
60mm M33 x 3.0 $443 $768 $543 CALL $570 $989 $563 $655
68mm M36 x 3.0 $520 $1,016 $621 CALL $671 $1,308 $654 $769
75mm M42 x 3.0 $588 $1,216 $688 CALL $756 $1,567 $724 $866
76mm M42 x 3.0 $547 $1,118 $647 CALL $705 $1,439 $685 $829
82mm M48 x 3.0 $607 $1,310 $708 CALL $783 $1,689 $749 $923
90mm M48 x 3.0 $733 $1,695 $840 CALL $915 $2,117 $860 $1,055
Nissei
Control Flow & Free Flow Carbide Inserts Locking Style 4 Piece
Screw
Thread H13 CPM Control Free H13 CPM H13 CPM
Diameter
Nitrided 9V Flow Flow Nitrided 9V Nitrided 9V
19mm M10 x 1.5 $248 $293 CALL CALL $309 $366 CALL CALL
22mm TR12 x 2.0 $254 $304 CALL CALL $318 $381 CALL CALL
28mm TR14 x 2.0 $269 $329 CALL CALL $336 $411 CALL CALL
30mm TR16 x 2.0 $277 $351 CALL CALL $347 $439 CALL CALL
32mm TR18 x 2.0 $284 $369 CALL CALL $355 $463 $390 $418
36mm TR20 x 2.0 $307 $430 $407 CALL $384 $539 $417 $452
38mm TR28 x 3.0 $310 $433 $410 CALL $389 $541 $415 $445
40mm TR24 x 3.0 $332 $483 $433 CALL $416 $605 $435 $480
44mm TR24 x 3.0 $357 $553 $457 CALL $447 $691 $460 $508
45mm TR26 x 3.0 $356 $552 $456 CALL $445 $690 $465 $511
48mm TR28 x 3.0 $370 $586 $471 CALL $464 $733 $475 $535
50mm TR28 x 3.0 $383 $636 $482 CALL $478 $796 $496 $556
54mm M30 x 1.5 $432 $785 $532 CALL $540 $982 $534 $601
56mm TR32 x 3.0 $426 $751 $527 CALL $533 $940 $536 $613
63mm TR36 x 3.0 $483 $928 $584 CALL $605 $1,160 $596 $691
64mm TR40 x 3.0 $490 $941 $590 CALL $613 $1,175 $599 $695
71mm TR44 x 3.0 $545 $1,108 $646 CALL $681 $1,386 $638 $752
72mm TR44 x 3.0 $556 $1,144 $656 CALL $695 $1,430 $649 $782
75mm M42 x 2.0 $547 $1,160 $648 CALL $684 $1,451 $659 $776
80mm TR48 x 3.0 $651 $1,436 $751 CALL $814 $1,796 $728 $869
84mm TR52 x 3.0 $688 $1,524 $788 CALL $859 $1,905 $754 $920
90mm TR55 x 3.0 $765 $1,758 $865 CALL $955 $2,198 $817 $986
100mm TR65 x 3.0 $884 $2,209 $1,011 CALL $1,104 $2,763 $883 $1,077
1-216-535-4848 17
®
40mm M18 x 2.5 $317 $443 $417 CALL $395 $554 $420 $466
45mm M20 x 2.5 $341 $508 $442 CALL $427 $635 $446 $496
50mm M24 x 3.0 $373 $624 $473 CALL $467 $780 $498 $555
55mm M27 x 3.0 $409 $744 $509 CALL $511 $929 $541 $613
60mm M30 x 3.5 $452 $885 $552 CALL $565 $1,105 $589 $677
65mm M30 x 3.5 $488 $948 $588 CALL $608 $1,185 $632 $727
70mm M33 x 3.5 $535 $1,101 $635 CALL $669 $1,375 $685 $783
75mm M33 x 3.5 $592 $1,297 $692 CALL $741 $1,620 $749 $868
80mm M36 x 4.0 $655 $1,519 $755 CALL $820 $1,899 $820 $960
90mm M39 x 4.0 $766 $1,850 $866 CALL $957 $2,314 $925 $1,094
105mm M42 x 4.5 $1,122 $2,977 $1,227 CALL $1,406 $3,741 $1,320 $1,660
120mm M48 x 5.0 $1,245 $3,368 $1,364 CALL $1,555 $4,208 $1,447 $1,831
Sumitomo
Control Flow & Free Flow Carbide Inserts Locking Style 4 Piece
Screw
Thread H13 CPM Control Free H13 CPM H13 CPM
Diameter
Nitrided 9V Flow Flow Nitrided 9V Nitrided 9V
18mm M9 x 1.0 $242 $286 CALL CALL $302 $357 CALL CALL
20mm M10 x 1.25 $245 $293 CALL CALL $306 $366 CALL CALL
22mm M10 x 1.25 $249 $299 CALL CALL $311 $375 CALL CALL
25mm M12 x 1.5 $256 $309 CALL CALL $320 $386 CALL CALL
28mm M12 x 1.5 $264 $325 CALL CALL $329 $406 CALL CALL
32mm M16 x 1.5 $277 $358 CALL CALL $347 $448 CALL CALL
36mm M16 x 1.5 $295 $413 $395 CALL $368 $516 $411 $447
40mm M20 x 2.0 $307 $433 $407 CALL $384 $541 $420 $456
45mm M20 x 2.0 $332 $509 $433 CALL $416 $636 $453 $499
50mm M24 x 2.0 $363 $603 $464 CALL $453 $753 $490 $546
56mm M24 x 2.0 $400 $724 $501 CALL $501 $905 $535 $606
63mm M33 x 3.0 $445 $867 $545 CALL $556 $1,083 $583 $672
71mm M33 x 3.0 $509 $1,074 $609 CALL $636 $1,343 $654 $764
80mm M40 x 3.0 $596 $1,363 $695 CALL $744 $1,702 $748 $904
90mm $716 $1,796 $816 CALL $895 $2,245 $873 $1,066
100mm $871 $2,401 $1,000 CALL $1,090 $3,001 $1,041 $1,303
112mm $1,079 $3,196 $1,208 CALL $1,349 $3,995 $1,251 $1,605
90mm $726 $1,689 $833 CALL $908 $2,110 $854 $1,049
100mm $847 $2,121 $957 CALL $1,059 $2,651 $977 $1,239
110mm $1,143 $3,009 $1,259 CALL $1,428 $3,761 $1,342 $1,682
125mm $1,245 $3,368 $1,364 CALL $1,555 $4,208 $1,447 $1,831
18 www.EMI corp.com
Injection Molding Supplies
End of Barrel
25mm M12 x 1.5 $256 $309 CALL CALL $320 $386 CALL CALL
28mm M15 x 1.5 $264 $325 CALL CALL $329 $406 CALL CALL
32mm M18 x 2.0 $278 $356 CALL CALL $348 $445 $385 $411
36mm M22 x 2.0 $304 $442 $405 CALL $381 $553 $409 $443
40mm M22 x 2.0 $322 $473 $422 CALL $401 $592 $429 $471
45mm M26 x 1.5 $348 $552 $447 CALL $434 $690 $453 $499
50mm M28 x 2.0 $361 $579 $463 CALL $452 $724 $476 $532
55mm M28 x 2.0 $418 $780 $517 CALL $522 $975 $541 $609
60mm M28 x 2.0 $464 $922 $564 CALL $578 $1,152 $600 $683
70mm M36 x 3.0 $554 $1,203 $654 CALL $693 $1,505 $677 $783
75mm M40 x 2.0 $617 $1,429 $717 CALL $771 $1,786 $741 $868
80mm M42 x 3.0 $676 $1,618 $776 CALL $844 $2,023 $301 $934
85mm M42 x 3.0 $748 $1,905 $849 CALL $934 $2,381 $888 $1,078
90mm M45 x 4.0 $688 $1,382 $788 CALL $859 $1,729 $751 $922
95mm M45 x 4.0 $868 $2,244 $969 CALL $1,084 $2,805 $933 $1,134
100mm M50 x 4.0 $1,155 $3,029 $1,283 CALL $1,445 $3,786 $1,177 $1,458
105mm M50 x 4.0 $1,245 $3,240 $1,372 CALL $1,555 $4,049 $1,245 $1,573
115mm M60 x 4.0 $1,469 $3,886 $1,597 CALL $1,836 $4,857 $1,413 $1,799
120mm M60 x 4.0 $1,679 $4,754 $1,807 CALL $2,100 $5,943 $1,599 $2,043
125mm M64 x 4.0 $1,851 $5,377 $1,980 CALL $2,315 $6,722 $1,739 $2,244
140mm M64 x 4.0 $2,346 CALL $2,480 CALL $2,933 CALL $2,056 CALL
Toyo
Control Flow & Free Flow Carbide Inserts Locking Style 4 Piece
Screw
Thread H13 CPM Control Free H13 CPM H13 CPM
Diameter
Nitrided 9V Flow Flow Nitrided 9V Nitrided 9V
20mm M10 x 1.25 CALL CALL CALL CALL CALL CALL CALL CALL
24mm M12 x 1.5 $261 $318 CALL CALL $327 $396 CALL CALL
28mm M16 x 2.0 $278 $359 CALL CALL $348 $449 CALL CALL
30mm M18 x 2.5 CALL CALL CALL CALL CALL CALL CALL CALL
32mm M18 x 2.5 $291 $385 CALL CALL $363 $481 $394 $423
36mm M18 x 2.5 $307 $433 $407 CALL $384 $541 $420 $455
40mm M22 x 2.5 $326 $474 $426 CALL $408 $593 $432 $477
46mm M24 x 3.0 $353 $554 $453 CALL $442 $693 $467 $520
50mm M27 x 3.0 $407 $691 $507 CALL $509 $864 $510 $572
55mm M27 x 3.0 $452 $829 $552 CALL $565 $1,036 $557 $633
60mm M30 x 3.0 $504 $967 $604 CALL $630 $1,209 $608 $694
68mm M33 x 3.5 $595 $1,202 $694 CALL $743 $1,504 $693 $803
75mm M36 x 4.0 $652 $1,407 $752 CALL $815 $1,759 $767 $905
83mm M38 x 4.0 $770 $1,730 $870 CALL $963 $2,164 $869 $1,039
As a supplier to the plastics industry since 1968, EMI has an • Beloit • Impco • Reed
extensive knowledge of components you may consider "difficult • Egan • Jaco • Stubbe
to find" elsewhere. If your company still operates some vintage • Farrel • Lester • TMC
equipment, give us a call! We may be able to offer assistance on • Fellows • Lombard
the following makes:
1-216-535-4848 19
®
25mm Z\x" - 13 $260 $321 CALL CALL $326 $400 $367 $391
28mm Z\x" - 13 $266 $328 CALL CALL $332 $410 $373 $399
31mm ⁵⁄₈" - 11 $293 $389 CALL CALL $366 $485 $400 $430
35mm ⁵⁄₈" - 11 $302 $426 CALL CALL $379 $533 $420 $455
38mm C\v" - 10 $300 $424 $400 CALL $376 $530 $410 $448
41mm C\v" - 10 $327 $505 $427 CALL $409 $631 $446 $495
Trueblood
Control Flow & Free Flow Carbide Inserts Locking Style 4 Piece
Screw
Thread H13 CPM Control Free H13 CPM H13 CPM
Diameter
Nitrided 9V Flow Flow Nitrided 9V Nitrided 9V
1" Z\x" - 13 $257 $310 CALL CALL $322 $389 CALL CALL
1Z\v" ⁵⁄₈" - 11 $278 $353 CALL CALL $348 $442 CALL CALL
1C\," ⁵⁄₈" - 11 $293 $393 CALL CALL $366 $492 $407 $441
1Z\x" ⁵⁄₈" - 11 $294 $390 $394 CALL $367 $486 $415 $449
1C\v" C\v" - 10 $320 $455 $420 CALL $399 $569 $449 $494
2" ⁷⁄₈" - 9 $351 $523 $451 CALL $439 $652 $477 $528
2Z\v" ⁷⁄₈" - 9 $366 $576 $467 CALL $457 $721 $510 $566
2Z\x" 1Z\₈" - 7 $399 $674 $500 CALL $500 $842 $556 $621
EMI standard lead time for non-stock screw tips is 3–4 weeks; however, for a $199.00 premium we will provide
shipment within 10 working days* and:
• Expedited design, spec confirmation and order processing
• Preferred set-up and production scheduling
• Arrangement of high-priority heat treatment with rush transportation services
If for any reason EMI cannot ship within 10 working days, the $199.00 premium will be waived.
*In cases requiring confirmation of specifications or when a sample valve is supplied, the 10 working day period will start upon full confirmation and
signed customer approval of dimensions.
20 www.EMI corp.com
Injection Molding Supplies
End of Barrel
25mm M12 x 1.75 $263 $323 CALL CALL $328 $404 CALL CALL
30mm ⁵⁄₈" - 11 $292 $385 CALL CALL $365 $481 CALL CALL
35mm ³⁄₄" - 10 $304 $421 CALL CALL $381 $526 $409 $446
38mm ³⁄₄" - 10 $311 $441 $406 CALL $390 $550 $420 $457
40mm ³⁄₄" - 10 $321 $455 $416 CALL $400 $569 $432 $470
50mm 1" - 8 $417 $690 $514 CALL $520 $863 $514 $573
57mm 1Z\v" - 7 $449 $808 $548 CALL $563 $1,011 $549 $624
65mm 1³⁄₈" - 6 $471 $905 $570 CALL $589 $1,132 $588 $681
69mm 1³⁄₈" - 6 $566 $1,156 $668 CALL $707 $1,446 $668 $780
75mm 1³⁄₈" - 6 $599 $1,307 $701 CALL $748 $1,634 $739 $869
80mm 1³⁄₈" - 6 $675 $1,538 $779 CALL $843 $1,922 $803 $964
90mm 1³⁄₄" - 8 $730 $1,734 $835 CALL $913 $2,169 $869 $1,060
105mm 1³⁄₄" - 8 $984 $2,660 $1,097 CALL $1,230 $3,326 $1,183 $1,507
115mm 2" - 8 $1,016 $2,760 $1,128 CALL $1,271 $3,450 $1,255 $1,606
135mm 2Z\x" - 8 $1,435 $4,319 $1,559 CALL $1,794 $5,398 $1,674 $2,301
155mm 3Z\v" - 4 $2,061 $6,768 $2,205 CALL $2,578 $8,460 $2,130 $3,084
165mm M75 x 4.0 CALL CALL CALL CALL CALL CALL CALL CALL
180mm 3Z\v" - 4 CALL CALL CALL CALL CALL CALL CALL CALL
185mm M85 x 4.0 CALL CALL CALL CALL CALL CALL CALL CALL
Welltec
Control Flow & Free Flow Carbide Inserts Locking Style 4 Piece
Screw
Thread H13 CPM Control Free H13 CPM H13 CPM
Diameter
Nitrided 9V Flow Flow Nitrided 9V Nitrided 9V
43mm M20 x 2.5 $348 $540 $447 CALL $434 $675 $470 $516
45mm M20 x 2.5 $332 $489 $428 CALL $416 $611 $446 $493
50mm M24 x 2.0 $360 $589 $456 CALL $451 $736 $495 $550
55mm $397 $691 $496 CALL $497 $864 $533 $607
56mm $440 $805 $540 CALL $549 $1,007 $572 $648
60mm M27 x 3.0 $451 $793 $550 CALL $564 $991 $585 $678
65mm M27 x 3.0 $483 $909 $584 CALL $605 $1,136 $646 $739
70mm $507 $1,015 $608 CALL $634 $1,269 $646 $760
75mm M36 x 4.0 $544 $1,152 $646 CALL $680 $1,440 $692 $830
80mm $667 $1,580 $767 CALL $833 $1,975 $833 $1,001
90mm M42 x 3.0 $726 $1,689 $833 CALL $908 $2,110 $854 $1,049
100mm $847 $2,121 $957 CALL $1,059 $2,651 $977 $1,239
110mm $1,143 $3,009 1,167 CALL $1,428 $3,761 $1,342 $1,682
115mm M56 x 3.0 $1,134 $3,093 1,169 CALL $1,418 $3,866 $1,291 $1,678
125mm $1,245 $3,368 1,263 CALL $1,555 $4,208 $1,447 $1,831
1-216-535-4848 21
®
Ball Checks
Front Discharge Hi-Flow
End of Barrel
This check valve offers the best all-around precision shot control Hi-Flow ball checks are ideal for high speed molding of general
available. Year after year, molders have preferred EMI’s ball purpose materials which normally require a ring valve. These ball
check because of its dependability and consistency. It includes checks include extra large inlets and flow paths to dramatically
a low cost, removable ball check insert that’s interchangeable increase melt flow while cutting compression ratios down to
for various compressions and recovery rates. These are just 1.5:1. Recovery times are cut without sacrificing precision shot
three reasons why molders prefer the Front Discharge ball check control. Included: EMI’s exclusive, low cost, removable ball check
when running non-shear-sensitive, general purpose materials. insert which is interchangeable for various compressions and
recovery rates.
Standard: 4150 pre-treated steel. Standard: 4150 pre-treated steel.
Optional: 440C stainless steel or CPM® 9V® tool steel. Optional: 440C stainless steel or CPM 9V tool steel.
Inserts available in S-7 tool steel. Inserts available in S-7 tool steel.
Side Discharge
This ball check valve gives you excellent shot control, enhanced
mixing action, is self-cleaning and purges rapidly via a “washing”
action between the nose cone and end cap, making it ideal for fast
color changes. Replaceable, low cost ball and ball seat minimize
maintenance costs and downtime. Hand seated interfaces ensure
a tight seal. This is an ideal valve for general purpose, non-shear-
sensitive materials where frequent color changes must be made.
22 www.EMI corp.com
Injection Molding Supplies
End of Barrel
4150 Pretreated diameter to R/C 45-55 to ¹⁄₄" General purpose materials.
resistance. Furnished in pre-heat-treated state of R/C 32.
max. depth on a side.
440C Stainless This grade of stainless steel offers not only good corrosion resistance but also Corrosive materials with low
Hardened to R/C 50-55.
Steel good mechanical properties not offered in other stainless steels. abrasion fillers.
CPM grade 9V has a hot work steel analysis with a high carbon and vanadium
Hardened to R/C 54-56. The
CPM 9V Tool content. This chemistry provides superior wear resistance not offered by any General purpose, engineered
stud is drawn down to R/C
Steel other specialty tool steel. CPM-9V also has exceptional torsional strength required and filled materials.
45-49.
for molding.
Note: CPM, 9V, and S90V are registered trademarks of Crucible Materials Corp.
1-216-535-4848 23
Check all that apply:
®
Hi-Flow Ball Check CPM® 9V® Shear Sensitive Other:
Side Discharge Ball CPM 9V + Nitride Corrosive CPM S90V® (SS)
Front Discharge Ball General Purpose High Speed Molding
Abrasive Carbide Inserts
Use Standard or Metric measurements.
D
[_________]
E
[_________]
G
F [_______________]
[_________] Thread Specifications LH or RH
C [_______]
A [_________] H [_________]
Ball Check Order/Quote Form
Email to Sales@EMIcorp.com or fax to 216-535-4823.
I [________]
B [_________]
J
[_______]
K
[_________]
®
www.EMI corp.com
Oz. Capacity: Telephone:
Serial #: Fax:
Date: Quote Order Email:
End of Barrel
24
Injection Molding Supplies
End of Barrel
18mm M10 x 1.5 -RH CALL CALL CALL 22mm M12 x 1.5 CALL CALL CALL
22mm M12 x 1.75 -RH CALL CALL CALL 25mm M10 x 1.5 CALL CALL CALL
25mm M12 x 1.75 -RH CALL CALL CALL 30mm M13 x 1.5 $445 $306 $398
30mm M14 x 1.5 -RH $439 $301 $392 35mm M16 x 1.5 $466 $321 $417
35mm M18 x 1.5 -RH $465 $321 $417 40mm M20 x 2.0 $480 $332 $432
40mm M18 x 1.5 -RH $483 $334 $435 45mm M20 x 2.0 $502 $349 $453
45mm M22 x 1.5 -RH $516 $359 $468 50mm M24 x 2.0 $529 $368 $478
50mm M24 x 1.5 -RH $553 $388 $504 55mm M24 x 2.0 $565 $395 $514
60mm M24 x 1.25 -RH $602 $424 $550 60mm M24 x 2.0 $625 $441 $572
65mm M24 x 2.0 $657 $466 $604
70mm M40 x 2.0 $704 $500 $650
Autojector 75mm M30 x 3.5 $748 $533 $693
Screw Side Front Discharge Front Discharge 85mm M30 x 2.0 $849 $608 $832
Thread
Diameter Discharge or Hi-Flow with FCI 90mm M40 x 2.0 $830 $595 $773
C\v" ⁷⁄₁₆" - 14 CALL CALL CALL 100mm M60 x 1.5 $957 $690 $896
1" Z\x" - 13 CALL CALL CALL 125mm M60 x 2.5 $1,325 $966 $1,254
1Z\v" ⁵⁄₈" - 11 $448 $308 $401 130mm M60 x 2.0 $1,449 $1,058 $1,373
1Z\x" C\v" - 10 $477 $330 $429 140mm M60 x 2.5 $1,821 $1,430 $1,856
1C\v" ⁷⁄₈" - 9 $515 $359 $468 150mm M65 x 2.5 CALL CALL CALL
2" 1" - 8 $570 $399 $519 170mm M75 x 2.5 CALL CALL CALL
2½" 1Z\v" - 7 $659 $468 $607
Boy
Screw Side Front Discharge Front Discharge
Thread
Diameter Discharge or Hi-Flow with FCI
14mm M8 x 1.5 CALL CALL CALL
16mm M8 x 1.5 CALL CALL CALL
18mm M10 x 1.5 CALL CALL CALL
22mm M10 x 1.5 CALL CALL CALL
24mm M12 x 1.75 CALL CALL CALL
28mm M12 x 1.75 CALL CALL CALL
32mm M14 x 2.0 $438 $300 $390
36mm M16 x 2.0 $454 $314 $407
38mm M16 x 2.0 $454 $314 $407
Ball Check Insert Wrenches
42mm M16 x 2.0 $473 $327 $425
Quick# Part# Sizing Price 48mm M18 x 2.5 $505 $352 $456
- BCW Call for Sizing $52
As a supplier to the plastics industry since 1968, EMI has an • Beloit • Impco • Reed
extensive knowledge of components you may consider "difficult • Egan • Jaco • Stubbe
to find" elsewhere. If your company still operates some vintage • Farrel • Lester • TMC
equipment, give us a call! We may be able to offer assistance on • Fellows • Lombard
the following makes:
1-216-535-4848 25
®
1B\," ³⁄₄" - 10 $474 $328 $426 22mm M10 x 1.5 CALL CALL CALL
1C\v" ³⁄₄" - 16 (fine) $496 $344 25mm M10 x 1.5 CALL CALL CALL
1C\v" ⁷⁄₈" - 9 $446 28mm M12 x 1.75 CALL CALL CALL
2" 1" - 8 $519 $361 $470 30mm M12 x 1.75 $429 $294 $381
2Z\v" 1" - 8 $566 $396 $515 32mm M14 X 2.0 $440 $301 $392
2Z\x" 1Z\v" - 12 (fine) $621 $439
38mm M16 x 2.0 $498 $347 $450
2Z\x" 1Z\v" - 7 (coarse) $621 $439 $569
40mm M16 x 2.0 $527 $367 $477
2C\v" 1Z\v" - 12 (fine) $661 $469
45mm TR20 x 3.0 $555 $390 $506
2C\v" 1Z\v" - 7 (coarse) $661 $469 $608
52mm TR22 x 3.0 $613 $432 $560
3Z\v" 1Z\x" - 12 (fine) $782 $559
3Z\v" 1Z\x" - 6 (coarse) $782 $559 $726 60mm TR27 x 3.0 $655 $464 $601
3Z\x" 1Z\x" - 12 (fine) $860 $618 70mm TR40 X 3.0 $769 $548 $713
3Z\x" 1Z\x" - 6 (coarse) $860 $618 $802 82mm TR35 x 3.0 $933 $673 $873
3Z\x" 1C\v" - 6 (coarse) $860 $618 110mm TR50 x 3.0 $1,207 $876 $1,138
4Z\x" 2" - 12 (fine) $1,150 $834 120mm TR60 x 3.0 $1,560 $1,129 $1,466
4Z\x" 2" - 6 (coarse) $1,150 $834 $1,082 145mm TR65 x 4.0 $2,217 $1,634 $2,122
5Z\v" 2Z\v" - 12 (fine) $1,468 $1,073
5Z\v" 2Z\v" - 6 (fine) $1,468 $1,073 $1,394
6" 2Z\x" - 6 (coarse) $1,803 $1,325 $1,720 Engel
8" 3Z\x" - 6 (coarse) $3,301 $2,448 $3,179 Screw Side Front Discharge Front Discharge
Thread
18mm M8 x 1.25 CALL CALL CALL Diameter Discharge or Hi-Flow with FCI
20mm M10 x 1.5 CALL CALL CALL 18mm M10 x 1.5 -RH CALL CALL CALL
22mm M10 x 1.5 CALL 22mm M12 x 1.75 -RH CALL CALL CALL
24mm M10 x 1.5 CALL CALL CALL 25mm M12 x 1.75 -RH CALL CALL CALL
28mm M12 x 1.75 CALL CALL CALL 30mm M12 x 1.75 -RH $430 $295 $383
32mm M18 x 2.5 $444 $306 $398 35mm M12 x 1.75 -RH $456 $315 $408
35mm M18 x 2.5 $460 $319 $414
40mm M16 x 2.0 -RH $466 $322 $418
36mm M20 x 2.5 $467 $322 $418
45mm M20 x 2.5-RH $489 $338 $439
40mm M20 x 2.5 $478 $331 $430
50mm M24 x 3.0 -RH $520 $363 $471
42mm M22 x 2.5 $473 $327 $425
55mm M24 x 3.0 -RH $548 $383 $498
45mm M22 x 2.5 $501 $349 $452
60mm M30 x 3.5 -RH $567 $397 $516
50mm M24 x 3.0 $531 $370 $480
55mm M24 x 3.0 $572 $400 $519 65mm M32 x 3.0 -RH $598 $421 $546
60mm M27 x 3.0 $602 $424 $550 70mm M36 x 4.0 -RH $636 $449 $583
65mm M30 x 3.5 $621 $438 $568 80mm M36 x 4.0 -RH $741 $528 $685
70mm M36 x 4.0 $690 $490 $635 85mm M42 x 4.5 -RH $783 $560 $727
80mm M42 x 4.5 $763 $544 $706 90mm M42 x 4.5 -RH $849 $608 $791
90mm M48 x 5.0 $917 $659 $856 95mm M42 x 4.5 -RH $899 $647 $840
100mm M52 x 5.0 $1,044 $755 $981 105mm M42 x 4.5 -RH $1,046 $756 $982
110mm M56 x 5.5 $1,347 $982 $1,276 120mm M54 x 2.0 -RH CALL CALL CALL
125mm M64 x 6.0 $1,449 $1,058 $1,374 135mm M64 x 2.0 -RH CALL CALL CALL
140mm M72 x 6.0 $2,000 $1,172 $1,522 150mm M64 x 6.0 -RH CALL CALL CALL
160mm M80 x 6.0 $2,167 $1,385 $1,798 170mm M64 x 6.0 -RH CALL CALL CALL
180mm M90 x 6.0
26 www.EMI corp.com
Injection Molding Supplies
End of Barrel
1C\," B\," - 11 $456 $315 $408 25mm M12 x 1.75 CALL CALL CALL
1Z\x" B\," - 11 $466 $322 $418 28mm M16 x 2.0 CALL CALL CALL
1B\," ³⁄₄" - 16 $348 N/A $428 32mm M18 x 2.5 $452 $310 $404
1C\v" ³⁄₄" - 10 $489 $338 $439 35mm TR20 x 3.0 $481 $332 $432
2" ⁷⁄₈" - 9 $513 $357 $465 40mm TR22 x 3.0 $495 $344 $446
2Z\v" 1" - 8 $549 $384 $499 45mm TR27 x 3.0 $514 $357 $465
2B\zn" 1" - 8 $615 $433 $563 46mm TR24 x 3.0 $530 $369 $479
2Z\x" 1Z\," - 7 $563 $394 $511 51mm TR27 x 3.0 $569 $398 $517
3" 1B\," - 6 $661 $469 $608 53mm TR28 x 3.0 $607 $428 $557
3Z\x" 1C\v" - 6 $779 $556 $722 58mm M36 x 3.0 $635 $448 $582
4" 2" - 6 $911 $655 $851 60mm TR55 x 3.0 $665 $471 $611
4Z\x" 2Z\v" - 6 $1,032 $746 $969 66mm TR38 x 3.0 $706 $501 $651
5¹⁄₄" 2C\v" - 6 $1,392 $1,016 $1,319 68mm TR40 x 3.0 $749 $534 $694
6" 3" - 6 $1,623 $1,190 $1,545 72mm TR40 x 3.0 $799 $572 $743
76mm TR40 x 3.0 $831 $596 $774
84mm TR47 x 3.0 $975 $704 $915
Husky 86mm $1,085 $786 $1,022
Screw Side Front Discharge Front Discharge 100mm $1,244 $904 $1,174
Thread
Diameter Discharge or Hi-Flow with FCI
25mm M12 x 1.75 CALL CALL CALL
30mm M14 x 2.0 CALL CALL CALL
32mm M14 x 2.0 CALL CALL CALL Kawaguchi
35mm M18 x 2.0 CALL CALL CALL Screw Side Front Discharge Front Discharge
Thread
Diameter Discharge or Hi-Flow with FCI
42mm M20.x 2.5 CALL CALL CALL
46mm M20.x 2.5 CALL CALL CALL 25mm TR13 x 2.0 CALL CALL CALL
50mm M26 x 3.0 CALL CALL CALL 27mm M14 x 2.0 CALL CALL CALL
60mm M30 x 3.5 CALL CALL CALL 28mm M15 x 1.5 CALL CALL CALL
70mm M36 x 4.0 CALL CALL CALL 30mm M16 x 1.5 $443 $303 $394
80mm M42 x 4.5 CALL CALL 32mm M16 x 1.5 $447 $308 $400
85mm M42 x 4.5 CALL CALL CALL 34mm M18 x 2.0 $466 $321 $417
90mm M45 x 4.5 CALL CALL 35mm M20 x 2.0 $469 $324 $420
100mm M52 x 5.0 CALL CALL CALL 36mm M20 x 2.0 $473 $327 $425
110mm M52 x 5.0 CALL CALL CALL 37mm TR20 x 2.0 $479 $331 $430
115mm M60 x 5.5 CALL CALL CALL 40mm TR20 x 2.0 $494 $344 $446
120mm M64 x 6.0 CALL CALL CALL 42mm TR24 x 3.0 $502 $349 $452
125mm M64 x 6.0 CALL CALL CALL 50mm TR30 x 3.0 $556 $390 $506
140mm M72 x 6.0 CALL CALL CALL 55mm TR30 x 3.0 $599 $421 $546
145mm M72 x 6.0 CALL CALL CALL 58mm TR34 x 4.0 $616 $433 $563
155mm M72 x 6.0 CALL CALL CALL 63mm TR34 x 4.0 $655 $465 $602
160mm M85 x 6.0 CALL CALL CALL 65mm M30 x 2.0 $608 $428 $556
175mm M90 x 6.0 CALL CALL CALL 70mm TR40 x 4.0 $691 $492 $638
72mm TR40 x 4.0 $748 $533 $692
75mm TR40 x 4.0 $793 $567 $736
80mm TR42 x 4.0 $852 $611 $794
85mm M46 x 5.0 $894 $644 $835
1-216-535-4848 27
®
34mm M16 x 2.0 $455 $315 $408 32mm M16 x 2.0 $458 $317 $411
40mm M20 x 2.5 $495 $344 $446 50mm M27 x 3.0 $575 $404 $525
42mm M20 x 2.5 $503 $350 $454 57mm M33 x 3.5 CALL CALL CALL
50mm M20 x 2.5 $565 $395 $513 62mm M36 x 4.0 $690 $490 $635
60mm M30 x 3.5 $615 $433 $563 70mm M39 x 4.0 $776 $554 $718
70mm M36 x 3.0 $689 $489 $634 80mm M45 x 4.5 $925 $665 $864
80mm M48 x 4.0 $866 $622 $807 90mm M48 x 5.0 $1,065 $770 $1,000
90mm M48 x 4.0 $986 $713 $925 105mm M56 x 5.5 $1,126 $817 $1,061
100mm M60 x 4.0 $1,038 $750 $975 120mm M60 x 5.5 $1,425 $1,041 $1,351
120mm M72 x 4.0 $1,558 $1,142 $1,483 135mm M68 x 3.0 $1,745 $1,281 $1,665
130mm M76 x 4.0 $1,826 $1,342 $1,743 150mm M76 x 6.0 $2,108 $1,555 $2,020
150mm M80 x 4.0 CALL CALL CALL 175mm M85 x 6.0 CALL CALL CALL
28 www.EMI corp.com
Injection Molding Supplies
End of Barrel
40mm M18 x 2.5 $488 $336 $438 1Z\v" ⁵⁄₈" - 11 $445 $306 $398
55mm M24 x 3.0 $598 $421 $546 1C\," ⁵⁄₈" - 11 $457 $316 $409
70mm M26 x 2.0 $690 $490 $635 1Z\x" C\v" - 10 $489 $339 $441
80mm M28 x 2.0 $763 $544 $706 1C\v" ⁷⁄₈" - 9 $498 $346 $448
90mm M32 x 2.0 $917 $659 $856 2" 1" - 8 $525 $365 $474
100mm $1,044 $755 $981 2Z\v" 1" - 8 $568 $397 $516
110mm $1,347 $982 $1,276 2Z\x" 1" - 8 $629 $447 $579
125mm $1,449 $1,058 3½" 1½" - 12 $873 $630 $818
As a supplier to the plastics industry since 1968, EMI has • Beloit • Impco • Reed
an extensive knowledge of components you may consider • Egan • Jaco • Stubbe
"difficult to find" elsewhere. If your company still operates • Farrel • Lester • TMC
some vintage equipment, give us a call! We may be able to • Fellows • Lombard
offer assistance on the following makes:
1-216-535-4848 29
®
22mm TR12 x 2.0 CALL CALL CALL 20mm M10 x 1.25 CALL CALL CALL
28mm TR14 x 2.0 CALL CALL CALL 22mm M10 x 1.25 CALL CALL CALL
30mm TR16 x 2.0 $436 $299 $389 25mm M12 x 1.5 CALL CALL CALL
32mm TR18 x 2.0 $444 $304 $395 28mm M12 x 1.5 CALL CALL CALL
36mm TR20 x 2.0 $472 $326 $423 32mm M16 x 1.5 $436 $299 $389
38mm TR28 x 3.0 $475 $328 $426 36mm M16 x 1.5 $457 $316 $409
40mm TR24 x 3.0 $500 $348 $451 40mm M20 x 2.0 $470 $325 $422
44mm TR24 x 3.0 $528 $367 $476 45mm M20 x 2.0 $499 $347 $450
45mm TR26 x 3.0 $527 $366 $475 50mm M24 x 2.0 $532 $370 $480
48mm TR28 x 3.0 $542 $379 $493 56mm M24 x 2.0 $573 $401 $522
50mm TR28 x 3.0 $555 $389 $504 63mm M33 x 3.0 $620 $438 $568
54mm M30 x 1.5 $609 $429 $558 71mm M33 x 3.0 $688 $488 $633
56mm TR32 x 3.0 $603 $425 $553 80mm M40 x 3.0 $773 $552 $716
63mm TR36 x 3.0 $663 $470 $609 90mm $895 $644 $835
64mm TR40 x 3.0 $671 $475 $617 100mm $1,050 $760 $986
71mm TR44 x 3.0 $727 $517 $672 110mm $1,185
72mm TR44 x 3.0 $739 $526 $682 112mm $1,255 $914 $1,276
75mm M42 x 2.0 $728 $519 $674 125mm $1,449 $1,058 $1,374
80mm TR48 x 3.0 $839 $602 $781
84mm TR52 x 3.0 $875 $628 $816
90mm TR55 x 3.0 $955 $688 $893
100mm TR65 x 3.0 $1,073 $777 $1,009 Toshiba
Screw Side Front Discharge Front Discharge
Thread
Diameter Discharge or Hi-Flow with FCI
25mm M12 x 1.5 CALL CALL CALL
Sandretto
28mm M15 x 1.5 CALL CALL CALL
Screw Side Front Discharge Front Discharge
Thread 32mm M18 x 2.0 $439 $301 $391
Diameter Discharge or Hi-Flow with FCI
36mm M22 x 2.0 $468 $323 $419
40mm M18 x 2.5 $481 $333 $433
40mm M22 x 2.0 $486 $336 $438
45mm M20 x 2.5 $510 $355 $460
45mm M26 x 1.5 $514 $357 $465
50mm M24 x 3.0 $544 $381 $495
50mm M28 x 2.0 $532 $371 $482
55mm M27 x 3.0 $584 $410 $532
55mm M28 x 2.0 $591 $416 $540
60mm M30 x 3.5 $628 $444 $576
60mm M28 x 2.0 $642 $453 $589
65mm M30 x 3.5 $671 $475 $617
70mm M36 x 3.0 $733 $523 $678
70mm M33 x 3.5 $722 $514 $667
75mm M40 x 2.0 $799 $571 $742
75mm M33 x 3.5 $782 $560 $727
80mm M42 x 3.0 $863 $619 $803
80mm M36 x 4.0 $850 $608 $791
85mm M42 x 3.0 $932 $673 $873
90mm M39 x 4.0 $963 $694 $901
90mm M45 x 4.0 $860 $618 $802
105mm M42 x 4.5 $1,326 $960 $1,248
95mm M45 x 4.0 $1,054 $764 $991
120mm M48 x 5.0 $1,449 $1,058 $1,374
100mm M50 x 4.0 $1,361 $993 $1,290
105mm M50 x 4.0 $1,446 $1,055 $1,371
115mm M60 x 4.0 $1,665 $1,221 $1,585
120mm M60 x 4.0 $1,880 $1,382 $1,795
125mm M64 x 4.0 $2,052 $1,511 $1,963
140mm M64 x 4.0 $2,547 $1,883 $2,446
30 www.EMI corp.com
Injection Molding Supplies
End of Barrel
24mm M12 x 1.5 CALL CALL CALL 30mm ⁵⁄₈" - 11 CALL CALL CALL
28mm M16 x 2.0 CALL CALL CALL 35mm C\v" - 10 $470 $324 $420
30mm M18 x 2.5 CALL CALL CALL 38mm C\v" - 10 $476 $329 $427
32mm M18 x 2.5 $453 $311 $405 40mm C\v" - 10 $488 $336 $438
36mm M18 x 2.5 $472 $326 $423 50mm 1" - 8 $597 $420 $545
40mm M22 x 2.5 $493 $341 $443 57mm 1Z\v" - 7 $630 $444 $576
46mm M24 x 3.0 $523 $364 $472 65mm 1³⁄₈" - 6 $647 $457 $594
50mm M27 x 3.0 $584 $409 $531 69mm 1³⁄₈" - 6 $754 $538 $698
55mm M27 x 3.0 $632 $446 $578 75mm 1³⁄₈" - 6 $786 $563 $730
60mm M30 x 3.0 $693 $493 $639 80mm 1³⁄₈" - 6 $869 $624 $809
68mm M33 x 3.5 $792 $566 $734 90mm 1³⁄₄" - 8 $916 $658 $855
75mm M36 x 4.0 $849 $608 $791 105mm 1³⁄₄" - 8 $1,178 $855 $1,109
83mm M38 x 4.0 $973 $703 $913 115mm 2" - 8 $1,207 $876 $1,138
135mm 2Z\x" - 8 $1,615 $1,183 $1,536
155mm 3Z\v" - 4 $2,217 $1,634 $2,122
165mm M75 x 4.0 CALL CALL CALL
Trubor 180mm 3Z\v" - 4 CALL CALL CALL
Screw Side Front Discharge Front Discharge 185mm M85 x 4.0 CALL CALL CALL
Thread
Diameter Discharge or Hi-Flow with FCI
25mm Z\x" - 13 CALL CALL CALL
28mm Z\x" - 13 CALL CALL CALL Welltec
31mm ⁵⁄₈" - 11 $456 $315 $408 Screw Side Front Discharge Front Discharge
Thread
Diameter Discharge or Hi-Flow with FCI
35mm ⁵⁄₈" - 11 $467 $322 $418
38mm C\v" - 10 $464 $320 $415 43mm M20 x 2.5 $517 $360 $452
41mm C\v" - 10 $494 $344 $446 45mm M20 x 2.5 $501 $349 $469
50mm M24 x 2.0 $531 $370 $480
55mm $572 $400 $566
56mm $619 $436 $566
Trueblood
60mm M27 x 3.0 $634 $447 $550
Screw Side Front Discharge Front Discharge
Thread 65mm M27 x 3.0 $669 $474 $568
Diameter Discharge or Hi-Flow with FCI
70mm $690 $490 $765
1" Z\x" - 13 CALL CALL CALL
75mm M36 x 4.0 $726 $517 $730
1Z\v" ⁵⁄₈" - 11 $439 $301 $391
80mm $855 $614 $796
1C\," ⁵⁄₈" - 11 $455 $315 $408
90mm M42 x 3.0 $917 $659 $856
1Z\x" ⁵⁄₈" - 11 $457 $316 $409
100mm $1,044 $755 $981
1C\v" C\v" - 10 $488 $336 $438
110mm $1,347 $982 $1,276
2" ⁷⁄₈" - 9 $524 $365 $474
115mm M56 x 3.0 $1,329 $970 $1,325
2Z\v" ⁷⁄₈" - 9 $541 $379 $493
125mm $1,449 $1,058 $1,374
2Z\x" 1Z\₈" - 7 536 $406 $527
As a supplier to the plastics industry since 1968, EMI has an • Beloit • Impco • Reed
extensive knowledge of components you may consider "difficult • Egan • Jaco • Stubbe
to find" elsewhere. If your company still operates some vintage • Farrel • Lester • TMC
equipment, give us a call! We may be able to offer assistance on • Fellows • Lombard
the following makes:
1-216-535-4848 31
®
32 www.EMI corp.com
Injection Molding Supplies
End of Barrel
L
ANGLE K
BETWEEN
HOLES THROUGH HOLE DIAMETER H
J
COUNTERBORE
DIAMETER
FEMALE
THREAD G
ØE INCLUDED
BOLT ØD ØA ØB ØC
ANGLE
CIRCLE
F
A:
B:
E (Bolt Circle): C:
Angle Between Holes: D:
Through Hole Diameter:
Counter Bore Diameter: F:
G:
H:
J:
K:
L:
Included Angle:
Female Thread:
1-216-535-4848 33
®
Nozzles
We’ve installed new automated machining centers which have boosted production of our nozzles and let us
lower prices. Tolerances are closer than OEM specifications and we guarantee each adaptor, nozzle, filter and
mixer for two years. We stock hundreds of sizes for popular machine makes and can custom build to your
End of Barrel
Nozzle Thermocouples...............35
Nozzle Transducer Adaptor.........35
Removeable Nozzle Tips.............36
Two-Piece Nozzles......................42
Two-Piece Nozzle Order Form.....43
One-Piece Nozzles......................58
One-Piece Nozzle Order Form.....59
Linear Edge Filters......................60
Linear Edge Mixers.....................61
Tramp Material Filter Nozzle........62
Heater Bands..............................63
Internally Heated Nozzles............64
Cartridge Heaters........................65
Shut-Off Nozzles.........................66
34 www.EMI corp.com
Injection Molding Supplies
Nozzle Thermocouples
Nozzle Thermocouples
Quick# Model # Description Termination Cover Type Other Price
N001 TCBSL48B bayonet style TC spade lugs 48" wire braid $16.25
End of Barrel
N002 TCBM2MJ48B bayonet Style TC male mini 48" wire braid $22.25
N003 TCBSL48A bayonet style TC spade lugs 48" armor cable $20.25
N004 TCBM2MJ48A bayonet style TC male mini 48" armor cable $26.50
N005 TCB90SL48A bayonet style TC spade lugs 48" armor cable x 90° $24.00
N006 TCSSL48A spade style TC spade lugs 48" armor cable $22.00
N007 TCT14SL48B threaded style TC spade lugs 48" wire braid ¹⁄₄"-28 thd. $18.25
N008 TCT18SL48B threaded style TC spade lugs 48" wire braid ¹⁄₈" NPT thd. $22.25
Standard — ANSI type “J”, for use up to 900°F (482° C). Inquire if type "K" TC is required.
Standard bayonet probe material — 304 stainless steel, ³⁄₁₆" diameter.
In stock for immediate shipment!
1-216-535-4848 35
®
36 www.EMI corp.com
Injection Molding Supplies
End of Barrel
N011 49-1-8 ¹⁄₁₆" $14.77 N045 49-1-12 ¹⁄₁₆" $14.77 RADIUS
N012 49-03-8 ³⁄₃₂" $14.77 N046 49-03-12 ³⁄₃₂" $14.77
N013 49-2-8 ¹⁄₈" $14.77 N047 49-2-12 ¹⁄₈" $14.77
N014 49-05-8 ⁵⁄₃₂" $14.77 N048 49-05-12 ⁵⁄₃₂" $14.77
N015 49-3-8 ³⁄₁₆" $14.77 N049 49-3-12 ³⁄₁₆" $14.77
N016 49-07-8 ⁷⁄₃₂" $14.77 N050 49-07-12 ⁷⁄₃₂" $14.77
1.50"
N017 49-4-8 ¹⁄₄" $14.77 N051 49-4-12 ¹⁄₄" $14.77 7/8 - 14
N018 49-09-8 ⁹⁄₃₂" $14.77 N052 49-09-12 ⁹⁄₃₂" $14.77
THREADS
STANDARD
N019 49-5-8 ⁵⁄₁₆" $14.77 N053 49-5-12 ⁵⁄₁₆" $14.77
N020 49-011-8 ¹¹⁄₃₂" $14.77 N054 49-011-12 ¹¹⁄₃₂" $14.77
N021 49-6-8 ³⁄₈" $14.77 N055 49-6-12 ³⁄₈" $14.77
0.50"
N022 49-8-8 ¹⁄₂" $14.77 N056 49-8-12 ¹⁄₂" $14.77
1-216-535-4848 37
®
38 www.EMI corp.com
Injection Molding Supplies
End of Barrel
N276 268-1-8 ¹⁄₁₆" $44.56 N288 268-1-12 ¹⁄₁₆" $44.56
N277 268-03-8 ³⁄₃₂" $44.56 N289 268-03-12 ³⁄₃₂" $44.56
N278 268-2-8 ¹⁄₈" $44.56 N290 268-2-12 ¹⁄₈" $44.56
2"
N279 268-05-8 ⁵⁄₃₂" $44.56 N291 268-05-12 ⁵⁄₃₂" $44.56
N280 268-3-8 ³⁄₁₆" $44.56 N292 268-3-12 ³⁄₁₆" $44.56
N281 268-07-8 $44.56 N293 268-07-12 $44.56
⁷⁄₃₂" ⁷⁄₃₂"
1.13 1-1/4 - 12
N282 268-4-8 ¹⁄₄" $44.56 N294 268-4-12 ¹⁄₄" $44.56 THREADS
N283 268-09-8 ⁹⁄₃₂" $44.56 N295 268-09-12 ⁹⁄₃₂" $44.56
N284 268-5-8 ⁵⁄₁₆" $44.56 N296 268-5-12 ⁵⁄₁₆" $44.56
N285 268-011-8 ¹¹⁄₃₂" $44.56 N297 268-011-12 ¹¹⁄₃₂" $44.56 .75
N286 268-6-8 ³⁄₈" $44.56 N298 268-6-12 ³⁄₈" $44.56
N287 268-8-8 ¹⁄₂" $44.56 N299 268-8-12 ¹⁄₂" $44.56
1-216-535-4848 39
®
USE 1" N082 49-300-2-8 ¹⁄₈" $39.38 N094 49-300-2-12 ¹⁄₈" $39.38
HEATER N083 49-300-05-8 ⁵⁄₃₂" $39.38 N095 49-300-05-12 ⁵⁄₃₂" $39.38
BAND 3.0" N084 49-300-3-8 $39.38 N096 49-300-3-12 $39.38
OTHER LENGTHS ³⁄₁₆" ³⁄₁₆"
AVAILABLE N085 49-300-07-8 ⁷⁄₃₂" $39.38 N097 49-300-07-12 ⁷⁄₃₂" $39.38
N086 49-300-4-8 ¹⁄₄" $39.38 N098 49-300-4-12 ¹⁄₄" $39.38
N087 49-300-09-8 ⁹⁄₃₂" $39.38 N099 49-300-09-12 ⁹⁄₃₂" $39.38
7/8 - 14
N088 49-300-5-8 $39.38 N100 49-300-5-12 $39.38
THREADS ⁵⁄₁₆" ⁵⁄₁₆"
STANDARD N089 49-300-011-8 ¹¹⁄₃₂" $39.38 N101 49-300-011-12 ¹¹⁄₃₂" $39.38
N090 49-300-6-8 ³⁄₈" $39.38 N102 49-300-6-12 ³⁄₈" $39.38
0.50"
N091 49-300-8-8 ¹⁄₂" $39.38 N103 49-300-8-12 ¹⁄₂" $39.38
ORIFICE
3" Extended Nylon Nozzle Tips
RADIUS
1/2" Radius 3/4" Radius
Quick# Part# Orifice Price Quick# Part# Orifice Price
3" Ø 1.00 N104 49-300-1-8N ¹⁄₁₆" $39.38 N114 49-300-1-12N ¹⁄₁₆" $39.38
OTHER LENGTHS N105 49-300-03-8N $39.38 N115 49-300-03-12N $39.38
³⁄₃₂" ³⁄₃₂"
AVAILABLE
N106 49-300-2-8N ¹⁄₈" $39.38 N116 49-300-2-12N ¹⁄₈" $39.38
N107 49-300-05-8N ⁵⁄₃₂" $39.38 N117 49-300-05-12N ⁵⁄₃₂" $39.38
5/8" N108 49-300-3-8N ³⁄₁₆" $39.38 N118 49-300-3-12N ³⁄₁₆" $39.38
N109 49-300-07-8N ⁷⁄₃₂" $39.38 N119 49-300-07-12N ⁷⁄₃₂" $39.38
7/8 - 14 N110 49-300-4-8N ¹⁄₄" $39.38 N120 49-300-4-12N ¹⁄₄" $39.38
7/8" THREADS
STANDARD N111 49-300-09-8N ⁹⁄₃₂" $39.38 N121 49-300-09-12N ⁹⁄₃₂" $39.38
N112 49-300-5-8N ⁵⁄₁₆" $39.38 N122 49-300-5-12N ⁵⁄₁₆" $39.38
.50 N113 49-300-6-8N ³⁄₈" $39.38 N123 49-300-6-12N ³⁄₈" $39.38
3" N124 49-300-1 8ABS ¹⁄₁₆" $50.78 N134 49-300-1-12ABS ¹⁄₁₆" $50.78
OTHER SIZES Ø 1.0 N125 49-300-03-8ABS ³⁄₃₂" $50.78 N135 49-300-03-12ABS ³⁄₃₂" $50.78
AVAILABLE
N126 49-300-2-8ABS ¹⁄₈" $50.78 N136 49-300-2-12ABS ¹⁄₈" $50.78
N127 49-300-05-8ABS ⁵⁄₃₂" $50.78 N137 49-300-05-12ABS ⁵⁄₃₂" $50.78
5/8" N128 49-300-3-8ABS ³⁄₁₆" $50.78 N138 49-300-3-12ABS ³⁄₁₆" $50.78
N129 49-300-07-8ABS ⁷⁄₃₂" $50.78 N139 49-300-07-12ABS ⁷⁄₃₂" $50.78
N130 49-300-4-8ABS ¹⁄₄" $50.78 N140 49-300-4-12ABS ¹⁄₄" $50.78
7/8" 7/8 - 14 N131 49-300-09-8ABS ⁹⁄₃₂" $50.78 N141 49-300-09-12ABS ⁹⁄₃₂" $50.78
THREADS
STANDARD N132 49-300-5-8ABS ⁵⁄₁₆" $50.78 N142 49-300-5-12ABS ⁵⁄₁₆" $50.78
.50 N133 49-300-6-8ABS ³⁄₈" $50.78 N143 49-300-6-12ABS ³⁄₈" $50.78
40 www.EMI corp.com
Injection Molding Supplies
End of Barrel
N145 59B-300-03-8 ³⁄₃₂" $59.07 N157 59B-300-03-12 ³⁄₃₂" $59.07
N146 59B-300-2-8 ¹⁄₈" $59.07 N158 59B-300-2-12 ¹⁄₈" $59.07 USE 1"
N147 59B-300-05-8 ⁵⁄₃₂" $59.07 N159 59B-300-05-12 ⁵⁄₃₂" $59.07 HEATER
BAND 3.0"
N148 59B-300-3-8 ³⁄₁₆" $59.07 N160 59B-300-3-12 ³⁄₁₆" $59.07
OTHER LENGTHS
N149 59B-300-07-8 ⁷⁄₃₂" $59.07 N161 59B-300-07-12 ⁷⁄₃₂" $59.07 AVAILABLE
N150 59B-300-4-8 ¹⁄₄" $59.07 N162 59B-300-4-12 ¹⁄₄" $59.07
N151 59B-300-09-8 ⁹⁄₃₂" $59.07 N163 59B-300-09-12 ⁹⁄₃₂" $59.07
N152 59B-300-5-8 $59.07 N164 59B-300-5-12 $59.07
7/8 - 14
⁵⁄₁₆" ⁵⁄₁₆"
THREADS
N153 59B-300-011-8 ¹¹⁄₃₂" $59.07 N165 59B-300-011-12 ¹¹⁄₃₂" $59.07 STANDARD
N154 59B-300-6-8 ³⁄₈" $59.07 N166 59B-300-6-12 ³⁄₈" $59.07
0.50"
N155 59B-300-8-8 ¹⁄₂" $59.07 N167 59B-300-8-12 ¹⁄₂" $59.07
1-216-535-4848 41
®
Two-Piece Nozzles
E M I ’s n o z z l e s f e a t u r e b e t t e r- t h a n - O E M
specifications and perfect finishes...no pits, burrs
or rough edges—yet they are priced low and
End of Barrel
Overall Length
1.0" 0.75" Bore Standard 0.875"
Machine Thread
Diameter
Large Bore Nozzle Tip to accept MFD Disc…………….$55.00 each. Ø .062 Inlet, .01 x 45
MFD Disc……………………………………………..$36.00 each. Ø .040 Outlet Typ.
43 Places
42 www.EMI corp.com
®
A
[__________]
B
[__________]
7/8 - 14 7/8"
C
THREAD
1-1/2" [__________]
STANDARD
D [__________] E [__________]
F
3/4"
[_______________]
Tamaño de la Rosca y el Paso
Machine Make: Company:
Tonnage: Name:
Oz. Capacity: Telephone:
Email to Sales@EMIcorp.com or fax to 216-535-4823.
Serial #: Fax:
1-216-535-4848
Date: Quote Order Email:
Injection Molding Supplies
End of Barrel
43
®
Two-Piece Nozzles
Arburg
Overall Nozzle Length
Thread Rear Thread Machine Thread
Diameter-Pitch Opening Length Diameter
4" 5" 5¹⁄₂" 6" 6¹⁄₂" 7" 7¹⁄₂" 8" 8¹⁄₂" 9" 9¹⁄₂" 10" 10¹⁄₂" 11" 11¹⁄₂" 12" 12¹⁄₂" 13"
End of Barrel
Two-Piece Nozzles
Autojector
Overall Nozzle Length
Thread Rear Thread Machine Thread
Diameter-Pitch Opening Length Diameter
4" 5" 5¹⁄₂" 6" 6¹⁄₂" 7" 7¹⁄₂" 8" 8¹⁄₂" 9" 9¹⁄₂" 10" 10¹⁄₂" 11" 11¹⁄₂" 12" 12¹⁄₂" 13"
End of Barrel
40 x 2mm 0.82 1.06
Battenfeld
Overall Nozzle Length
Thread Rear Thread Machine Thread
Diameter-Pitch Opening Length Diameter
4" 5" 5¹⁄₂" 6" 6¹⁄₂" 7" 7¹⁄₂" 8" 8¹⁄₂" 9" 9¹⁄₂" 10" 10¹⁄₂" 11" 11¹⁄₂" 12" 12¹⁄₂" 13"
2¹⁄₈"–2³⁄₄"
65 x 3mm 1.88 1.81 $83 $96 $104 $110 $120 $131 $134 $136 $152 $168 $177 $185 $192 $197 $215 $232 $241 $250
51mm–70mm
2⁷⁄₈"–3¹⁄₄"
90 x 4mm Trap 1.89 2.36 $121 $140 $149 $159 $168 $177 $184 $192 $200 $207 $217 $226 $231 $236 $252 $266 $282 $296
71mm–85mm
Big Bore &
Any Any Any $121 $140 $149 $159 $168 $177 $184 $192 $200 $207 $217 $226 $231 $236 $252 $266 $282 $296
Female Thread
1-216-535-4848 45
®
Two-Piece Nozzles
Boy
Overall Nozzle Length
Thread Rear Thread Machine Thread
Diameter-Pitch Opening Length Diameter
4" 5" 5¹⁄₂" 6" 6¹⁄₂" 7" 7¹⁄₂" 8" 8¹⁄₂" 9" 9¹⁄₂" 10" 10¹⁄₂" 11" 11¹⁄₂" 12" 12¹⁄₂" 13"
End of Barrel
2¹⁄₈"–2³⁄₄"
2"-12 1.00 1⁷⁄₈" $83 $96 $104 $110 $120 $131 $134 $136 $152 $168 $177 $185 $192 $197 $215 $232 $241 $250
51mm–70mm
Big Bore &
Any Any Any $121 $140 $149 $159 $168 $177 $184 $192 $200 $207 $217 $226 $231 $236 $252 $266 $282 $296
Female Thread
Cincinnati Milacron
Overall Nozzle Length
Thread Rear Thread Machine Thread
Diameter-Pitch Opening Length Diameter
4" 5" 5¹⁄₂" 6" 6¹⁄₂" 7" 7¹⁄₂" 8" 8¹⁄₂" 9" 9¹⁄₂" 10" 10¹⁄₂" 11" 11¹⁄₂" 12" 12¹⁄₂" 13"
2¹⁄₈"–2³⁄₄"
2"-8 1.19 0.98 $83 $96 $104 $110 $120 $131 $134 $136 $152 $168 $177 $185 $192 $197 $215 $232 $241 $250
51mm–70mm
2⁷⁄₈"–3¹⁄₄"
3¹⁄₄"-8 1.38 1.19 $121 $140 $149 $159 $168 $177 $184 $192 $200 $207 $217 $226 $231 $236 $252 $266 $282 $296
71mm–85mm
Big Bore &
Any Any Any $121 $140 $149 $159 $168 $177 $184 $192 $200 $207 $217 $226 $231 $236 $252 $266 $282 $296
Female Thread
46 www.EMI corp.com
Injection Molding Supplies
Two-Piece Nozzles
Demag
Overall Nozzle Length
Thread Rear Thread Machine Thread
Diameter-Pitch Opening Length Diameter
4" 5" 5¹⁄₂" 6" 6¹⁄₂" 7" 7¹⁄₂" 8" 8¹⁄₂" 9" 9¹⁄₂" 10" 10¹⁄₂" 11" 11¹⁄₂" 12" 12¹⁄₂" 13"
End of Barrel
2¹⁄₈"–2³⁄₄"
60 x 3mm 0.99 1.50 $83 $96 $104 $110 $120 $131 $134 $136 $152 $168 $177 $185 $192 $197 $215 $232 $241 $250
51mm–70mm
Big Bore &
Any Any Any $121 $140 $149 $159 $168 $177 $184 $192 $200 $207 $217 $226 $231 $236 $252 $266 $282 $296
Female Thread
Engel
Overall Nozzle Length
Thread Rear Thread Machine Thread
Diameter-Pitch Opening Length Diameter
4" 5" 5¹⁄₂" 6" 6¹⁄₂" 7" 7¹⁄₂" 8" 8¹⁄₂" 9" 9¹⁄₂" 10" 10¹⁄₂" 11" 11¹⁄₂" 12" 12¹⁄₂" 13"
Up to 2"
40 x 3mm 1.18 1.39 $55 $64 $69 $74 $84 $93 $102 $109 $113 $116 $131 $144 $154 $164 $173 $182 $192 $201
Up to 50mm
1-216-535-4848 47
®
Two-Piece Nozzles
HPM
Overall Nozzle Length
Thread Rear Thread Machine Thread
Diameter-Pitch Opening Length Diameter
4" 5" 5¹⁄₂" 6" 6¹⁄₂" 7" 7¹⁄₂" 8" 8¹⁄₂" 9" 9¹⁄₂" 10" 10¹⁄₂" 11" 11¹⁄₂" 12" 12¹⁄₂" 13"
End of Barrel
Up to 2"
1³⁄₄"-8 0.75 1³⁄₄" $55 $64 $69 $74 $84 $93 $102 $109 $113 $116 $131 $144 $154 $164 $173 $182 $192 $201
Up to 50mm
2¹⁄₈"–2³⁄₄"
2¹⁄₂"-8 1.00 1⁵⁄₈" $83 $96 $104 $110 $120 $131 $134 $136 $152 $168 $177 $185 $192 $197 $215 $232 $241 $250
51mm–70mm
1¹⁄₄"-8 0.63
2⁷⁄₈"–3¹⁄₄"
1⁵⁄₈"-12 0.75 1" $121 $140 $149 $159 $168 $177 $184 $192 $200 $207 $217 $226 $231 $236 $252 $266 $282 $296
71mm–85mm
2¹⁄₂"-8 1.00
3¹⁄₈"-8 1.00
1-3/4"-8
Machine Adaptor Pricing Thread
$225.00 Rear Opening
3/4"
Made to your machine Opening
thread specifications.
Made to Your
Machine Thread
1-5/8" Specifications
48 www.EMI corp.com
Injection Molding Supplies
Two-Piece Nozzles
Husky
Overall Nozzle Length
Thread Rear Thread Machine Thread
Diameter-Pitch Opening Length Diameter
4" 5" 5¹⁄₂" 6" 6¹⁄₂" 7" 7¹⁄₂" 8" 8¹⁄₂" 9" 9¹⁄₂" 10" 10¹⁄₂" 11" 11¹⁄₂" 12" 12¹⁄₂" 13"
End of Barrel
1³⁄₄"-8 0.38 1⁵⁄₈"
Up to 2"
1³⁄₄"-8 0.63 1³⁄₈" $55 $64 $69 $74 $84 $93 $102 $109 $113 $116 $131 $144 $154 $164 $173 $182 $192 $201
Up to 50mm
2¹⁄₈"–2³⁄₄"
45 x 3mm 0.63 2.05 $83 $96 $104 $110 $120 $131 $134 $136 $152 $168 $177 $185 $192 $197 $215 $232 $241 $250
51mm–70mm
2⁷⁄₈"–3¹⁄₄"
64 x 4mm 0.63 2.52 $121 $140 $149 $159 $168 $177 $184 $192 $200 $207 $217 $226 $231 $236 $252 $266 $282 $296
71mm–85mm
2¹⁄₈"–2³⁄₄"
64 x 4mm 0.87 2.36 $83 $96 $104 $110 $120 $131 $134 $136 $152 $168 $177 $185 $192 $197 $215 $232 $241 $250
51mm–70mm
Up to 2"
72 x 4mm 0.63 2.52 $55 $64 $69 $74 $84 $93 $102 $109 $113 $116 $131 $144 $154 $164 $173 $182 $192 $201
Up to 50mm
Big Bore &
Any Any Any $121 $140 $149 $159 $168 $177 $184 $192 $200 $207 $217 $226 $231 $236 $252 $266 $282 $296
Female Thread
JSW
Overall Nozzle Length
Thread Rear Thread Machine Thread
Diameter-Pitch Opening Length Diameter
4" 5" 5¹⁄₂" 6" 6¹⁄₂" 7" 7¹⁄₂" 8" 8¹⁄₂" 9" 9¹⁄₂" 10" 10¹⁄₂" 11" 11¹⁄₂" 12" 12¹⁄₂" 13"
55 x 3mm
1-216-535-4848 49
®
Two-Piece Nozzles
Kawaguchi
Overall Nozzle Length
Thread Rear Thread Machine Thread
Diameter-Pitch Opening Length Diameter
4" 5" 5¹⁄₂" 6" 6¹⁄₂" 7" 7¹⁄₂" 8" 8¹⁄₂" 9" 9¹⁄₂" 10" 10¹⁄₂" 11" 11¹⁄₂" 12" 12¹⁄₂" 13"
End of Barrel
2¹⁄₈"–2³⁄₄"
55 x 3mm 0.75 1.94 $83 $96 $104 $110 $120 $131 $134 $136 $152 $168 $177 $185 $192 $197 $215 $232 $241 $250
51mm–70mm
Big Bore &
Any Any Any $121 $140 $149 $159 $168 $177 $184 $192 $200 $207 $217 $226 $231 $236 $252 $266 $282 $296
Female Thread
Klockner Windsor
Overall Nozzle Length
Thread Rear Thread Machine Thread
Diameter-Pitch Opening Length Diameter
4" 5" 5¹⁄₂" 6" 6¹⁄₂" 7" 7¹⁄₂" 8" 8¹⁄₂" 9" 9¹⁄₂" 10" 10¹⁄₂" 11" 11¹⁄₂" 12" 12¹⁄₂" 13"
2¹⁄₈"–2³⁄₄"
52 x 3mm 0.64 3.28 $83 $96 $104 $110 $120 $131 $134 $136 $152 $168 $177 $185 $192 $197 $215 $232 $241 $250
51mm–70mm
Big Bore &
Any Any Any $121 $140 $149 $159 $168 $177 $184 $192 $200 $207 $217 $226 $231 $236 $252 $266 $282 $296
Female Thread
50 www.EMI corp.com
Injection Molding Supplies
Two-Piece Nozzles
Krauss Maffei
Overall Nozzle Length
Thread Rear Thread Machine Thread
Diameter-Pitch Opening Length Diameter
4" 5" 5¹⁄₂" 6" 6¹⁄₂" 7" 7¹⁄₂" 8" 8¹⁄₂" 9" 9¹⁄₂" 10" 10¹⁄₂" 11" 11¹⁄₂" 12" 12¹⁄₂" 13"
End of Barrel
1¹⁄₄"-12 0.75 1³⁄₈"
Up to 2"
45 x 2mm 0.71 1.61 $55 $64 $69 $74 $84 $93 $102 $109 $113 $116 $131 $144 $154 $164 $173 $182 $192 $201
Up to 50mm
2¹⁄₈"–2³⁄₄"
55 x 3mm 1.42 1.31 $83 $96 $104 $110 $120 $131 $134 $136 $152 $168 $177 $185 $192 $197 $215 $232 $241 $250
51mm–70mm
64 x 3mm
1.00 1.75
Female
2⁷⁄₈"–3¹⁄₄"
85 x 2mm 2.17 1.57 $121 $140 $149 $159 $168 $177 $184 $192 $200 $207 $217 $226 $231 $236 $252 $266 $282 $296
71mm–85mm
MIR
Overall Nozzle Length
Thread Rear Thread Machine Thread
Diameter-Pitch Opening Length Diameter
4" 5" 5¹⁄₂" 6" 6¹⁄₂" 7" 7¹⁄₂" 8" 8¹⁄₂" 9" 9¹⁄₂" 10" 10¹⁄₂" 11" 11¹⁄₂" 12" 12¹⁄₂" 13"
Mitsubishi
Overall Nozzle Length
Thread Rear Thread Machine Thread
Diameter-Pitch Opening Length Diameter
4" 5" 5¹⁄₂" 6" 6¹⁄₂" 7" 7¹⁄₂" 8" 8¹⁄₂" 9" 9¹⁄₂" 10" 10¹⁄₂" 11" 11¹⁄₂" 12" 12¹⁄₂" 13"
Up to 2"
1¹⁄₂"-12 0.59 1³⁄₈" $55 $64 $69 $74 $84 $93 $102 $109 $113 $116 $131 $144 $154 $164 $173 $182 $192 $201
Up to 50mm
2¹⁄₄"-8 2⁷⁄₈"–3¹⁄₄"
0.93 1⁷⁄₆₄" $121 $140 $149 $159 $168 $177 $184 $192 $200 $207 $217 $226 $231 $236 $252 $266 $282 $296
Female 71mm–85mm
Big Bore &
Any Any Any $121 $140 $149 $159 $168 $177 $184 $192 $200 $207 $217 $226 $231 $236 $252 $266 $282 $296
Female Thread
1-216-535-4848 51
®
Two-Piece Nozzles
Natco
Overall Nozzle Length
Thread Rear Thread Machine Thread
Diameter-Pitch Opening Length Diameter
4" 5" 5¹⁄₂" 6" 6¹⁄₂" 7" 7¹⁄₂" 8" 8¹⁄₂" 9" 9¹⁄₂" 10" 10¹⁄₂" 11" 11¹⁄₂" 12" 12¹⁄₂" 13"
End of Barrel
Negri Bossi
Overall Nozzle Length
Thread Rear Thread Machine Thread
Diameter-Pitch Opening Length Diameter
4" 5" 5¹⁄₂" 6" 6¹⁄₂" 7" 7¹⁄₂" 8" 8¹⁄₂" 9" 9¹⁄₂" 10" 10¹⁄₂" 11" 11¹⁄₂" 12" 12¹⁄₂" 13"
Up to 2"
30 x 1.5mm 0.75 0.88 $55 $64 $69 $74 $84 $93 $102 $109 $113 $116 $131 $144 $154 $164 $173 $182 $192 $201
Up to 50mm
2¹⁄₈"–2³⁄₄"
58 x 3mm 1.73 1.50 $83 $96 $104 $110 $120 $131 $134 $136 $152 $168 $177 $185 $192 $197 $215 $232 $241 $250
51mm–70mm
2⁷⁄₈"–3¹⁄₄"
70 x 2mm 1.77 1.57 $121 $140 $149 $159 $168 $177 $184 $192 $200 $207 $217 $226 $231 $236 $252 $266 $282 $296
71mm–85mm
52 www.EMI corp.com
Injection Molding Supplies
Two-Piece Nozzles
Netstal
Overall Nozzle Length
Thread Rear Thread Machine Thread
Diameter-Pitch Opening Length Diameter
4" 5" 5¹⁄₂" 6" 6¹⁄₂" 7" 7¹⁄₂" 8" 8¹⁄₂" 9" 9¹⁄₂" 10" 10¹⁄₂" 11" 11¹⁄₂" 12" 12¹⁄₂" 13"
End of Barrel
48 x 3mm 1.26 1.30
Up to 2"
$55 $64 $69 $74 $84 $93 $102 $109 $113 $116 $131 $144 $154 $164 $173 $182 $192 $201
Up to 50mm
48 x 3mm 0.52 1.38
New Britain
Overall Nozzle Length
Thread Rear Thread Machine Thread
Diameter-Pitch Opening Length Diameter
4" 5" 5¹⁄₂" 6" 6¹⁄₂" 7" 7¹⁄₂" 8" 8¹⁄₂" 9" 9¹⁄₂" 10" 10¹⁄₂" 11" 11¹⁄₂" 12" 12¹⁄₂" 13"
Up to 2"
45 x 4mm 0.47 1.89 $55 $64 $69 $74 $84 $93 $102 $109 $113 $116 $131 $144 $154 $164 $173 $182 $192 $201
Up to 50mm
Newbury
Overall Nozzle Length
Thread Rear Thread Machine Thread
Diameter-Pitch Opening Length Diameter
4" 5" 5¹⁄₂" 6" 6¹⁄₂" 7" 7¹⁄₂" 8" 8¹⁄₂" 9" 9¹⁄₂" 10" 10¹⁄₂" 11" 11¹⁄₂" 12" 12¹⁄₂" 13"
Up to 2"
48 x 3mm 1¹⁄₂"-12 1³⁄₁₆" $55 $64 $69 $74 $84 $93 $102 $109 $113 $116 $131 $144 $154 $164 $173 $182 $192 $201
Up to 50mm
Big Bore &
Any Any Any $121 $140 $149 $159 $168 $177 $184 $192 $200 $207 $217 $226 $231 $236 $252 $266 $282 $296
Female Thread
Niigata
Overall Nozzle Length
Thread Rear Thread Machine Thread
Diameter-Pitch Opening Length Diameter
4" 5" 5¹⁄₂" 6" 6¹⁄₂" 7" 7¹⁄₂" 8" 8¹⁄₂" 9" 9¹⁄₂" 10" 10¹⁄₂" 11" 11¹⁄₂" 12" 12¹⁄₂" 13"
2¹⁄₈"–2³⁄₄"
55 x 2mm 1.42 2.02 $83 $96 $104 $110 $120 $131 $134 $136 $152 $168 $177 $185 $192 $197 $215 $232 $241 $250
51mm–70mm
Big Bore &
Any Any Any $121 $140 $149 $159 $168 $177 $184 $192 $200 $207 $217 $226 $231 $236 $252 $266 $282 $296
Female Thread
1-216-535-4848 53
®
Two-Piece Nozzles
Nissei
Overall Nozzle Length
Thread Rear Thread Machine Thread
Diameter-Pitch Opening Length Diameter
4" 5" 5¹⁄₂" 6" 6¹⁄₂" 7" 7¹⁄₂" 8" 8¹⁄₂" 9" 9¹⁄₂" 10" 10¹⁄₂" 11" 11¹⁄₂" 12" 12¹⁄₂" 13"
End of Barrel
Up to 2"
1¹⁄₂"-12 0.51 1³⁄₁₆" $55 $64 $69 $74 $84 $93 $102 $109 $113 $116 $131 $144 $154 $164 $173 $182 $192 $201
Up to 50mm
2⁷⁄₈"–3¹⁄₄"
80 x 2mm 1.58 3.23 $121 $140 $149 $159 $168 $177 $184 $192 $200 $207 $217 $226 $231 $236 $252 $266 $282 $296
71mm–85mm
Big Bore &
Any Any Any $121 $140 $149 $159 $168 $177 $184 $192 $200 $207 $217 $226 $231 $236 $252 $266 $282 $296
Female Thread
Sandretto
Overall Nozzle Length
Thread Rear Thread Machine Thread
Diameter-Pitch Opening Length Diameter
4" 5" 5¹⁄₂" 6" 6¹⁄₂" 7" 7¹⁄₂" 8" 8¹⁄₂" 9" 9¹⁄₂" 10" 10¹⁄₂" 11" 11¹⁄₂" 12" 12¹⁄₂" 13"
Up to 2"
1³⁄₄"-8 0.75 1⁷⁄₈" $55 $64 $69 $74 $84 $93 $102 $109 $113 $116 $131 $144 $154 $164 $173 $182 $192 $201
Up to 50mm
Stokes
Overall Nozzle Length
Thread Rear Thread Machine Thread
Diameter-Pitch Opening Length Diameter
4" 5" 5¹⁄₂" 6" 6¹⁄₂" 7" 7¹⁄₂" 8" 8¹⁄₂" 9" 9¹⁄₂" 10" 10¹⁄₂" 11" 11¹⁄₂" 12" 12¹⁄₂" 13"
Up to 2"
1³⁄₄"-8 1.25 1⁵⁄₈" $55 $64 $69 $74 $84 $93 $102 $109 $113 $116 $131 $144 $154 $164 $173 $182 $192 $201
Up to 50mm
2¹⁄₈"–2³⁄₄"
2¹⁄₄"-8 1.63 1⁵⁄₈" $83 $96 $104 $110 $120 $131 $134 $136 $152 $168 $177 $185 $192 $197 $215 $232 $241 $250
51mm–70mm
Big Bore &
Any Any Any $121 $140 $149 $159 $168 $177 $184 $192 $200 $207 $217 $226 $231 $236 $252 $266 $282 $296
Female Thread
54 www.EMI corp.com
Injection Molding Supplies
Two-Piece Nozzles
Sumitomo
Overall Nozzle Length
Thread Rear Thread Machine Thread
Diameter-Pitch Opening Length Diameter
4" 5" 5¹⁄₂" 6" 6¹⁄₂" 7" 7¹⁄₂" 8" 8¹⁄₂" 9" 9¹⁄₂" 10" 10¹⁄₂" 11" 11¹⁄₂" 12" 12¹⁄₂" 13"
End of Barrel
48 x 2mm 0.48 1.61
Up to 2"
$55 $64 $69 $74 $84 $93 $102 $109 $113 $116 $131 $144 $154 $164 $173 $182 $192 $201
Up to 50mm
48 x 2mm 1.26 1.31
2¹⁄₈"–2³⁄₄"
68 x 3mm 2.01 1.42 $83 $96 $104 $110 $120 $131 $134 $136 $152 $168 $177 $185 $192 $197 $215 $232 $241 $250
51mm–70mm
Big Bore &
Any Any Any $121 $140 $149 $159 $168 $177 $184 $192 $200 $207 $217 $226 $231 $236 $252 $266 $282 $296
Female Thread
Toshiba
Overall Nozzle Length
Thread Rear Thread Machine Thread
Diameter-Pitch Opening Length Diameter
4" 5" 5¹⁄₂" 6" 6¹⁄₂" 7" 7¹⁄₂" 8" 8¹⁄₂" 9" 9¹⁄₂" 10" 10¹⁄₂" 11" 11¹⁄₂" 12" 12¹⁄₂" 13"
Up to 2"
1¹⁄₂"-12 0.59 1" $55 $64 $69 $74 $84 $93 $102 $109 $113 $116 $131 $144 $154 $164 $173 $182 $192 $201
Up to 50mm
2¹⁄₈"–2³⁄₄"
60 x 4mm 1.25 1.61 $83 $96 $104 $110 $120 $131 $134 $136 $152 $168 $177 $185 $192 $197 $215 $232 $241 $250
51mm–70mm
1-216-535-4848 55
®
Two-Piece Nozzles
Toyo
Overall Nozzle Length
Thread Rear Thread Machine Thread
Diameter-Pitch Opening Length Diameter
4" 5" 5¹⁄₂" 6" 6¹⁄₂" 7" 7¹⁄₂" 8" 8¹⁄₂" 9" 9¹⁄₂" 10" 10¹⁄₂" 11" 11¹⁄₂" 12" 12¹⁄₂" 13"
End of Barrel
Up to 2"
42 x 3mm 0.95 1.18 $55 $64 $69 $74 $84 $93 $102 $109 $113 $116 $131 $144 $154 $164 $173 $182 $192 $201
Up to 50mm
Trubor
Overall Nozzle Length
Thread Rear Thread Machine Thread
Diameter-Pitch Opening Length Diameter
4" 5" 5¹⁄₂" 6" 6¹⁄₂" 7" 7¹⁄₂" 8" 8¹⁄₂" 9" 9¹⁄₂" 10" 10¹⁄₂" 11" 11¹⁄₂" 12" 12¹⁄₂" 13"
2¹⁄₈"–2³⁄₄"
2"-12 1.50 1¹⁄₂" $83 $96 $104 $110 $120 $131 $134 $136 $152 $168 $177 $185 $192 $197 $215 $232 $241 $250
51mm–70mm
UBE
Overall Nozzle Length
Thread Rear Thread Machine Thread
Diameter-Pitch Opening Length Diameter
4" 5" 5¹⁄₂" 6" 6¹⁄₂" 7" 7¹⁄₂" 8" 8¹⁄₂" 9" 9¹⁄₂" 10" 10¹⁄₂" 11" 11¹⁄₂" 12" 12¹⁄₂" 13"
Up to 2"
1¹⁄₄"-12 0.76 1³⁄₈" $55 $64 $69 $74 $84 $93 $102 $109 $113 $116 $131 $144 $154 $164 $173 $182 $192 $201
Up to 50mm
2¹⁄₈"–2³⁄₄"
52 x 5mm 0.89 2.63 $83 $96 $104 $110 $120 $131 $134 $136 $152 $168 $177 $185 $192 $197 $215 $232 $241 $250
51mm–70mm
56 www.EMI corp.com
Injection Molding Supplies
Two-Piece Nozzles
Van Dorn
Thread Rear Thread Machine Thread Overall Nozzle Length
Diameter-Pitch Opening Length Diameter 4" 5" 5¹⁄₂" 6" 6¹⁄₂" 7" 7¹⁄₂" 8" 8¹⁄₂" 9" 9¹⁄₂" 10" 10¹⁄₂" 11" 11¹⁄₂" 12" 12¹⁄₂" 13"
End of Barrel
⁷⁄₈"-14 0.38 ⁷⁄₈"
Up to 2"
1¹⁄₄"-12 0.88 1¹⁄₂" $55 $64 $69 $74 $84 $93 $102 $109 $113 $116 $131 $144 $154 $164 $173 $182 $192 $201
Up to 50mm
2¹⁄₈"–2³⁄₄"
2¹⁄₂"-8 1.25 1⁵⁄₈" $83 $96 $104 $110 $120 $131 $134 $136 $152 $168 $177 $185 $192 $197 $215 $232 $241 $250
51mm–70mm
Big Bore &
Any Any Any $121 $140 $149 $159 $168 $177 $184 $192 $200 $207 $217 $226 $231 $236 $252 $266 $282 $296
Female Thread
Welltec
Thread Rear Thread Machine Thread Overall Nozzle Length
Diameter-Pitch Opening Length Diameter 4" 5" 5¹⁄₂" 6" 6¹⁄₂" 7" 7¹⁄₂" 8" 8¹⁄₂" 9" 9¹⁄₂" 10" 10¹⁄₂" 11" 11¹⁄₂" 12" 12¹⁄₂" 13"
Up to 2"
36 x 2mm 0.40 1.50 $55 $64 $69 $74 $84 $93 $102 $109 $113 $116 $131 $144 $154 $164 $173 $182 $192 $201
Up to 50mm
2¹⁄₈"–2³⁄₄"
60 x 3mm 1.57 2.20 $83 $96 $104 $110 $120 $131 $134 $136 $152 $168 $177 $185 $192 $197 $215 $232 $241 $250
51mm–70mm
Big Bore &
Any Any Any $121 $140 $149 $159 $168 $177 $184 $192 $200 $207 $217 $226 $231 $236 $252 $266 $282 $296
Female Thread
1-216-535-4848 57
®
One-Piece Nozzles
EMI’s nozzles feature better-than-OEM specifications and perfect finishes...no pits, burrs
or rough edges, yet they are priced low and guaranteed for two years. Each must pass
our 100% Quality Assurance standards. One-piece nozzles are made of S-7 tool steel.
End of Barrel
Overall Length
0.75" 0.50" Bore Standard 0.875"
Specify
Radius
Machine Thread
Diameter
Specify
Orifice
1.50" Diameter
Any Any Any $189 $193 $202 $222 $242 $272 $300 $331 $363 $393 $423 $453
58 www.EMI corp.com
®
Check all that apply:
Standard Design Internally Heated Nozzle Special Steel Consideration:
Nylon/ Reverse Taper Thermocouple Holes (qty_____)
ABS / Full Taper Tap Size:
C
D
[__________]
[__________]
A E
7/8"
R[______] [__________]
1-1/2"
STANDARD
B F [________] G [__________]
[_______]
Email:
1-216-535-4848
Date: Quote Order
Injection Molding Supplies
End of Barrel
59
®
1-3/4"-8
Machine Adaptor Pricing
Thread
Rear Opening
$225.00 3/4"
Made to your machine
Opening
thread specifications. Made to Your
Machine Thread
1-5/8" Specifications
60 www.EMI corp.com
Injection Molding Supplies
End of Barrel
Mixes dry colors, liquids, & concentrates with minimal pressure
drop. Filters larger impurities.
Available for most any make machine, EMI linear edge mixers are a direct
replacement for your existing nozzle. The mixers have multiple flutes over
which materials must pass, blending materials together three times on their
way to the discharge flutes. A .020" clearance above the barrier minimizes
pressure drop and traps foreign particles larger than .020", protecting sub-
gates and hot runner tips. The mixer has standard, 1¹⁄₂" O.D. nozzle body
dimensions, uses standard nozzle tips and heater bands and the nozzle tip
is easily removed for cleaning.
1-216-535-4848 61
®
Filter Plate
Quick # Part # Price
N346 U-TF $96 ea.
127 filter plate holes (.093" x .032") filter out most contaminants such as wood, paper, iron,
brass, and other material that may pass through traditional ferrous metal hopper magnets.
2 7/8"
2 1/8" 1-5/8" STANDARD LENGTH
AVAILABLE IN ANY LENGTH
TO FIT APPLICATION 3/4"
ADAPTOR SPECIFICATIONS
TO SUIT PRESS
STANDARD 7/8" - 14
Ø 1.50 THREADS
Ø 4.00
62 www.EMI corp.com
Injection Molding Supplies
Terminal Style: 24" Stainless Steel Braid Heater Bands Heater Bands
Inside
Quick# EMI Part# Price Width Wattage Voltage
Diameter
H001 EMA01NW-1-110 $28.96 1 110 120
H002 EMA01NW-2 -110 $28.96 1 110 240 EMI heater bands are ruggedly constructed to
H003 EMA02NW-1-275 $29.80
1"
2 275 120 deliver long, reliable service.
End of Barrel
H004 EMA02NW-2-275 $29.80 2 275 240
H005 EMA21NW-1-125 $28.96 1 125 120
H006 EMA21NW-2-125 $28.96 1 125 240 Strong, stainless steel braid protects wiring on sizes
1¹⁄₄"
H007 EMA214NW-1-200 $29.27 1¹⁄₂ 200 120 up to 1¹⁄₂" x 1'. Leads on larger size heater bands are
H008 EMA214NW-2-200 $29.27 1¹⁄₂ 200 240 heavy-duty, reinforced fiber glass or post type.
H009 EMA406NW-1-125 $28.96 ³⁄₄ 125 120
H010 EMA406NW-2-125 $28.96 ³⁄₄ 125 240
1¹⁄₂"
H011 EMA41NW-1-150 $28.96 1 150 120
H012 EMA41NW-2-150 $28.96 1 150 240
Terminal Style: 24" Flex Lead Heater Bands Terminal Style: Post Type Heater Bands
Inside Inside
Quick# EMI Part# Price Width Wattage Voltage Quick# EMI Part# Price Width Wattage Voltage
Diameter Diameter
H013 EMA412N-2-225 $30.49 1¹⁄₄ 225 240 H045 EMD014F-2-500 $25.81 4" 1¹⁄₂ 500 240
H014 EMA414N-1-275 $30.49 1¹⁄₂ 275 120 H046 EMD414F-2-750 $27.04 4¹⁄₂" 1¹⁄₂ 750 240
H015 EMA414N-2-275 $30.49 1¹⁄₂ 275 240 H047 EME014F-2-900 $27.67 5" 1¹⁄₂ 800 240
H016 EMA42N-1-300 $30.81 2 300 120 H048 EME414F-2-900 $28.87 5¹⁄₂" 1¹⁄₂ 900 240
H017 EMA42N-2-300 $30.81 2 300 240 H049 EMF014F-2-1000 $29.76 6" 1¹⁄₂ 1000 240
H018 EMA424N-1-350 $32.44 2¹⁄₂ 350 120 H050 EMF414F-2-1000 $30.86 6¹⁄₂" 1¹⁄₂ 1000 240
H019 EMA424N-2-350 $32.44 2¹⁄₂ 350 240 H051 EMG014F-2-1000 $32.14 7" 1¹⁄₂ 1000 240
H020 EMA43N-1-425 $33.41 3 425 120
H021 EMA43N-2-425 $33.41 1¹⁄₂" 3 425 240
H022 EMA434N-1-500 $34.40 3¹⁄₂ 500 120
H023 EMA434N-2-500 $34.40 3¹⁄₂ 500 240
H024 EMA44N-1-550 $36.70 4 550 120
H025 EMA44N-2-550 $36.70 4 550 240
H026 EMA45N-1-650 $37.53 5 650 120
H027 EMA45N-2-650 $37.53 5 650 240
H028 EMA46N-1-800 $40.17 6 800 120
H029 EMA46N-2-800 $40.17 6 800 240
H030 EMA614N-1-275 $30.54 1¹⁄₂ 275 120
H031 EMA614N-2-275 $30.54 1¹⁄₂ 275 240
1³⁄₄"
H032 EMA63N-1-450 $33.80 3 450 120
H033 EMA63N-2-450 $33.80 3 450 240
H034 EMB014N-1-190 $30.54 1¹⁄₂ 190 120
2"
H035 EMB014N-2-190 $30.54 1¹⁄₂ 190 240
H036 EMB414N-1-325 $30.81 1¹⁄₂ 325 120
2¹⁄₂"
H037 EMB414N-2-325 $30.81 1¹⁄₂ 325 240
H038 EMC014N-1-400 $31.99 1¹⁄₂ 400 120
3"
H039 EMC014N-2-400 $31.99 1¹⁄₂ 400 240
H040 EMC214N-2-350 $32.56 3¹⁄₄" 1¹⁄₂ 350 240
H041 EMC414N-1-400 $32.56 1¹⁄₂ 400 120
3¹⁄₂"
H042 EMC414N-2-400 $32.56 1¹⁄₂ 400 240
H043 EMD014N-1-500 $37.66 1¹⁄₂ 500 120
4"
H044 EMD014N-2-500 $37.66 1¹⁄₂ 500 240
1-216-535-4848 63
®
Ideal solutions when space restrictions prevent the Information required for pricing:
use of heater bands
End of Barrel
OVERALL LENGTH
INCLUDES TIP
SPECIFY THREAD DIA. & PITCH,
DRILLED TO ACCEPT THREAD LENGTH & REAR OPENING
(3) 1/4" CARTRIDGE HEATERS
3/4"
REAR
OPENING
7/8" - 14
THREADS Ø 1.75
Internally Heated
$185 $201 $209 $217 $229 $241 $244 $247 $266 $284 $295 $304 $311 $318 $338 $358 $369 $379
Nozzle
64 www.EMI corp.com
Injection Molding Supplies
Cartridge Heaters
All EMI cartridge heaters are quality made for long life and
End of Barrel
precision fit. Reinforced leads protect wiring, providing
a dependable heat source for your cartridge heater
applications.
When determining cartridge heater size, take overall Cartridge Heaters (12" SST Braided Leads)
length minus thread length minus 1¹⁄₂". Length Voltage Wattage Quick# Part# Price
* Round down to nearest cartridge heater length. 1¹⁄₄" 120 75 H052 EH12-12A-1-0075 $29.64
1¹⁄₄" 240 75 H053 EH12-12A-2-0075 $29.64
1¹⁄₂" 120 110 H054 EH12-14A-1-0110 $31.07
1¹⁄₂" 240 110 H055 EH12-14A-2-0110 $31.07
2" 120 150 H056 EH12-2A-1-0150 $31.07
2" 240 150 H057 EH12-2A-2-0150 $31.07
2¹⁄₂" 120 185 H058 EH12-24A-1-0185 $33.21
2¹⁄₂" 240 185 H059 EH12-24A-2-0185 $33.21
3" 120 220 H060 EH12-3A-1-0220 $34.64
3" 240 220 H061 EH12-3A-2-0220 $34.64
3¹⁄₂" 120 260 H062 EH12-34A-1-0260 $37.14
3¹⁄₂" 240 260 H063 EH12-34A-2-0260 $37.14
4" 120 300 H064 EH12-4A-1-0300 $39.29
4" 240 300 H065 EH12 4A-2-0300 $39.29
4¹⁄₂" 120 350 H066 EH12-44A-1-0350 $40.71
4¹⁄₂" 240 350 H067 EH12-44A-2-0350 $40.71
5" 120 400 H068 EH12-5A-1-0400 $42.86
5" 240 400 H069 EH12-5A-2-0400 $42.86
5¹⁄₂" 120 425 H070 EH12-54A-1-0425 $44.29
5¹⁄₂" 240 425 H071 EH12-54A-2-0425 $44.29
6" 120 450 H072 EH12-6A-1-0450 $45.00
6" 240 450 H073 EH12-6A-2-0450 $45.00
6¹⁄₂" 120 485 H074 EH12-64A-1-0485 $47.86
6¹⁄₂" 240 485 H075 EH12-64A-2-0485 $47.86
7" 120 525 H076 EH12-7A-1-0525 $49.29
7" 240 525 H077 EH12-7A-2-0525 $49.29
7¹⁄₂" 120 525 H078 EH12-74A-1-0525 $50.71
7¹⁄₂" 240 525 H079 EH12-74A-2-0525 $50.71
8" 120 525 H080 EH12-8A-1-0525 $52.14
8" 240 600 H081 EH12-8A-2-0600 $52.14
8¹⁄₂" 120 525 H082 EH12-84A-1-0525 $53.57
8¹⁄₂" 240 635 H083 EH12-84A-2-0635 $53.57
9" 120 525 H084 EH12-9A-1-0525 $55.00
9" 240 675 H085 EH12-9A-2-0675 $55.00
9¹⁄₂" 120 525 H086 EH12-94A-1-0525 $56.43
9¹⁄₂" 240 705 H087 EH12-94A-2-0705 $56.43
10" 120 525 H088 EH12-10A-1-0525 $57.86
10" 240 750 H089 EH12-10A-2-0750 $57.86
10¹⁄₂" 120 525 H090 EH12-104A-1-0525 $59.29
10¹⁄₂" 240 785 H091 EH12-104A-2-0785 $59.29
11" 120 525 H092 EH12-11A-1-0525 $60.71
11" 240 825 H093 EH12-11A-2-0825 $60.71
Note: diameter is ¹⁄₄" for all cartridge heaters.
1-216-535-4848 65
®
Shut-Off Nozzles
retract while the mold is opening and closing. You’ll shave cycle times to a minimum and increase fill rates
for high speed or large part molding. Positive, air-operated pin closing allows faster screw recovery and stops
drool in its tracks.
66 www.EMI corp.com
Injection Molding Supplies
Shut-Off Nozzles
End of Barrel
A field-proven Performer at stopping drool, reducing Pick the right Performer shut-off nozzle for
scrap, and reducing cycle times in these applications: your process
Selection of the right Performer nozzle is based on
Conventional molding: your injection pressure, machine size, flow rate,
Control nozzle temperatures without freeze-up or drool. Speed
sled travel and material. Answers to these questions
recovery rate and reduce cycle times. Inject into parting line
will help determine nozzle selection:
to eliminate sprue and cut material usage. Permits structural
foam molding.
1. What is your plastic melt injection pressure?
(Not the hydraulic system pressure). If under
Gate directly into part:
18,000 psi, any of the Performer series shown
Cut material use and lower tooling costs by eliminating the
can be used. If over 18,000 psi, but less than
sprue and runner. Cut start-up time. Faster color changes than
30,000 psi, use the 2900 Series.
hot manifold method.
Why the patented EMI design out-lasts and out-performs every other shut-off nozzle.
With spring-operated valves, you cannot positively Hydraulic-operated valves have seals which may
control shut-off because spring-operated valves leak oil onto heater bands and other heated surfaces
are dependant on injection pressure. With heat which may flash fire.
variations, springs fail prematurely. The springs EMI Performer nozzles give you a dependable,
themselves actually restrict resin flow and make positive open-close design which cut cycle times,
color changes more difficult. last longer, and operate safer than other nozzle
Single air valve designs wear unevenly at the cross- types.
arm and pin, which loosens the shut-off seal making
them prone to leaking, drooling, and expensive
maintenance.
1-216-535-4848 67
®
FA style:
68 www.EMI corp.com
Injection Molding Supplies
"A"
4-11/16" "B"
WHEN IN
End of Barrel
CLOSED POSITION
1.95
6.25
ADAPTOR
SPECIFICATIONS
TO SUIT PRESS 1.75
REF.
NOZZLE TIP
RADIUS & ORIFICE
PER ORDER
FA Style
8.28
4-11/16"
WHEN IN
CLOSED POSITION
1.95 3.43
1-3/4"- 8 -UN-2B
STANDARD FEMALE
6.25 THREADS
ADAPTOR SPECIFICATIONS
TO SUIT PRESS
3-7/16"
REF.
*OAL can be reduced further by building a one-piece machine adaptor and end cap.
1-216-535-4848 69
®
FA style:
70 www.EMI corp.com
Injection Molding Supplies
End of Barrel
2.97
9.50
ADAPTOR
SPECIFICATIONS
TO SUIT PRESS
FA Style
11.52
6-1/2"
WHEN IN 4.88
CLOSED POSITION
2.97
1-3/4"- 8 -UN-2B
STANDARD FEMALE
ADAPTOR THREADS
SPECIFICATIONS 9.50 For those who need a shut-off
nozzle with a smaller width across
TO SUIT PRESS the air cylinders, EMI has a 2048
FA with a 6.75" width compared to
the 9.5" of the 2600 FA.
4" 6.75
REF.
* OAL can be reduced further by building a one-piece machine adaptor and end cap.
1-216-535-4848 71
®
FA style:
(Recommended temperature control) 2 zone, 15 amp/zone mainframe (MF02A), and 2 (TC5F) controllers.
(If needed, cables and connectors are sold separately). See page 199.
72 www.EMI corp.com
Injection Molding Supplies
End of Barrel
11.00
ADAPTOR
SPECIFICATIONS NOZZLE TIP
TO SUIT PRESS RADIUS & ORIFICE
PER ORDER
2.90
REF.
FA Style
14.14
3.89 5.23
5.02
1-3/4"- 8 -UN-2B
11.00 STANDARD FEMALE
ADAPTOR SPECIFICATIONS THREADS
TO SUIT PRESS
4-7/8"
REF
4-5/8"
WHEN NOZZLE IS
IN CLOSED POSITION
* OAL can be reduced further by building a one-piece machine adaptor and end cap.
1-216-535-4848 73
®
74 www.EMI corp.com
Injection Molding Supplies
End of Barrel
11.00
FA Style
12.88
10.53
2.48 2.35
11.00
1-3/4"- 8 -UN-2B
STANDARD FEMALE
THREADS
ADAPTOR SPECIFICATIONS
TO SUIT PRESS 6-5/8"
REF.
Ø 3.00