Professional Documents
Culture Documents
GPCDOC GTDS Shell Helix Diesel HX7 10W-30 (CF A3 B3 B4) (En) TDS v2
GPCDOC GTDS Shell Helix Diesel HX7 10W-30 (CF A3 B3 B4) (En) TDS v2
Shell Helix Diesel HX7 has been formulated with special active cleansing technology. It works harder to protect than
conventional motor oils by continuously preventing soot deposits from building up on engine surfaces for better
responsiveness right up to the next oil change.
· Special active cleansing technology · Suitable for turbo-charged and intercooled direct-injection
Works harder to protect than conventional mineral oils by diesel engines fitted with 'blow-by' gas recirculation without
continuously preventing soot deposits building up on engine particulate filters.
surfaces.
Specifications, Approvals & Recommendations
· Enhanced oxidation stability · API: CF
Up to 19% more protection than other synthetic technology
leading brands tested. · ACEA: A3/B3/B4
· Low viscosity rapid oil flow and low friction · VW: 505.00
Greater fuel efficiency. · MB Approval: 229.1
· High shear stability · PSA D Level III
Maintains viscosity and stays in grade throughout the oil For a full listing of equipment approvals and recommendations,
change interval. please consult your local Shell Technical Helpdesk, or the OEM
Approvals website.
· Specially selected synthetic base oils
Reduce oil volatility and therefore oil consumption and the
need for top-up.
These characteristics are typical of current production. Whilst future production will conform to Shell's specification, variations in these characteristics
may occur.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Additional Information
· Advice
Advice on applications not covered here may be obtained from your Shell representative.