Professional Documents
Culture Documents
2FC Datasheet
2FC Datasheet
Heat storage capacity of anode 140 KHU 200 KHU 300 KHU 400 KHU 600 KHU
Collimator
ProRad 2FC is provided with a mulitleaf collimator which is defined by 6 pairs of shu ers, four of which are lead lined. The six
pairs of shu er move perpendicularly within the x-ray field. Shu er movements are manual and controlled by two knobs on
the collimator front panel. Direct visualiza on of the x-ray field is provided by a light beam of high luminosity provided by a
quartz iodide lamp. To extend the lamp life there is an electronic mer provided which will switch off the lamp a er 30
seconds automa cally to prevent overhea ng. ProRad 2FC also provides motorized collimator and automa c collimator as
an op on.
Ver cal Stand
ProRad 2FC is provided with a heavy duty ver cal bucky stand providing full
flexibility for all radiographic examina ons. The ver cal stand is suitable for
all varie es of examina ons including horizontal, ver cal and oblique angles.
It also allows off-table radiographies of skull and spine in horizontal and
ver cal posi ons and a variety of radiographs of pa ent standing,
recumbent, si ng on wheel chair or on a stretcher. The ver cal stand is fully
counterbalance system with a ver cal travel of 131 cm. The l ng angle is
from - 200 to 00 to 900 (Horizontal). All the brakes for the movements is
electromagne c. The grid of standard ra o provided is provided which is
removable to do radiographs with non grid applica ons possible. The ver cal stand is provided with a bucky tray which can
take image receptor (Analog / CR / DR) up to a size 43 cm x 43 cm (17”x17”). The movements (ver cal and l ng) is manual
and automa c movement is provided as an op on.
Mobile Examina on Table
The mobile table with a four way floa ng table
top with length of the table top 210 cm and
width of the table top 81 cm is ideally suited
for a single detector system. The table has
longitudinal movement of ± 50 cm, transverse
movement of ± 12.5cm.
The mobile x-ray table is provided with Carbon
Fibre Table Top and can withstand a pa ent
weight up to 250 KG (300 KG as an Op on).
All movement brakes are electro magne c.
19” Square Monitor; keyboard, mouse or DICOM work list through HIS/RIS/PACS
Pa ent data entry
(op onal)
Full exposure parameters can be set manually or AEC (Op onal) can be used.
Selec on of exposure
Anatomical programming can be set for a variety of examina ons.
X-Ray Generator
Output Microprocessor Controlled High-Frequency output up to 400 KHZ
40 KW 50 KW 65 KW 80KW
KV mA mA mA mA
Output Parameters
80 500 630 800 1000
100 400 500 630 800
Anatomical Programme
768 possible exam techniques
Radiography (APR)
Automa c Exposure
Up to 5 Chambers
Control (AEC) – Op onal
Heat storage capacity of anode 140 KHU 200KHU 300 KHU 400 KHU 600 KHU
Large Focus 2.0 mm 1.5 mm 1.2 mm 1.2 mm 1.2 mm
Focal Spot
Small Focus 1.0 mm 0.6 mm 0.6 mm 0.6 mm 0.6 mm
Large Focus 47 kW 50 kW 75 KW 102 KW 100 KW
Nominal Anode Input Power
Small Focus 22.5kW 18 kW 27 KW 40 KW 40 KW
Anode Target Angle in Degrees 16 14 12 12 12
Maximum Tube Current 570 mA 800 mA 1000 mA 1000 mA 1000 mA
Longitudinal travel: ± 50 cm
Transverse travel: ± 12.5 cm
Table top Length 210 cm Width 81 cm
Table movement
Tabletop material: carbon fiber
Maximum pa ent weight: 250 KG (Op on – 300 KG)
Height of Table 70 cm
LL FREE
TO