Professional Documents
Culture Documents
System 1: GE Energy
System 1: GE Energy
®
GE Energy System 1
GE’s Optimization and
Diagnostic Platform
' Real-time condition status data including: vibration, position, speed, temperature, and more. The Turbomachinery
application package comes pre-configured for the type of machine you plan to manage
– thus simplifying the set-up and reducing the implementation time. Available
Capabilities Decision SupportSM RulePaks complement the Turbomachinery package by adding
asset specific diagnostics for “around the clock” event detection and sophisticated
' High resolution data acquisition
data analysis.
' Trending
' 3500/TDI Early detection of equipment degradation or impending failure helps to reduce
maintenance costs. Changes in a machine’s operating characteristics can be seen
' 3300/TDe
before significant damage occurs, allowing operators time to react and prevent more
' TDXnet expensive repairs or catastrophic failure. Limiting unplanned failures or significant
degradation leads to increased productivity.
' 1701(FMIM)
Reduction of Outage Duration
' 2201
A thorough understanding of equipment condition allows for more efficient outages.
Unnecessary inspections and maintenance can be eliminated if an asset’s operating
characteristics show little or no degradation. Precious maintenance resources can be
focused on performing work that is actually required.
Contact
Optimizing with Decision Support SM
For complete product specifications
and ordering information: Decision Support functionality, built into every application package, allows machinery
- contact your local salesperson engineers or other personnel to automate the analysis of machinery condition and
- call 775-782-3611
and ask for “System 1” at the prompt
configure targeted advisories of equipment degradation or malfunction. Rules derived
- e-mail us at system1info@ge.com from the experience of plant engineers and operators can be used to continuously
- visit our Web site at evaluate equipment condition. Additionally, targeted RulePaks for many types of
www.gepower.com/system1
equipment are available, allowing for more rapid implementation of
©2004, General Electric Company. All rights reserved. The contents of this document this critical functionality. Utilizing Decision Support enables
are the property of General Electric Company. No part of this work may be reproduced
or transmitted in any form or by any means, except as permitted in written license machinery engineers to spend more of their time resolving
agreement with General Electric Company. General Electric Company has made every
reasonable attempt to ensure the completeness and accuracy of this document. problems and optimizing the operation of assets.
However, the information contained in this document is subject to change without
notice, and does not represent a commitment on the part of General Electric Company.
The GE logo is a registered trademark of General Electric Company.