Professional Documents
Culture Documents
Spiral Bevel Gear Arcoid System ZFTKK 250-1
Spiral Bevel Gear Arcoid System ZFTKK 250-1
NO DESCRIPTION VALUE
Symbol
A. INITIAL CONDITIONS PINION
New designing of an ARCOID pair of bevel gears
For new designing, the following initial parameters must be known :
1 Shaft Angle dA 90
2 Number of teeth Z 11
3 Pressure angle aon 20
4 Mean helix angle/ Spiral angle bm 35
5 Flank lead - LH
6 Mean normal module mnm 4.9191
7 Face width b 36.5
8 Or external transverse module msa 7
NOTES :
Z1 ≥ 6 Z2 ≥ Z1 is a must
Crown gear; no. of teeth 25 ≤ Zp ≤ 100 is a must Zp 36.6878726557
(Z1/Z2) + COS(dA) > 0 is a must 0.3142857143
Mean normal module is the reference magnitude for calculating the tooth dimensions
External transverse module is only an initial magnitude with given external dimension
(msa = do/z) and unknown mean normal module
90
35
20
35
RH
4.9191
36.5
7
36.6878726557
0.3142857143
72.5528
3.1818181818
35
h and the profile width modification
110.1573972981
36.7191324327
36.5
128.4073972981
6.9999914415
7.00