Professional Documents
Culture Documents
Manual Modem Valenet Gpon Ont User Manual
Manual Modem Valenet Gpon Ont User Manual
Applicable Models
Page: 1 / 72
SGN8668MVWG2 Series GPON ONT User Manual
Page: 2 / 72
SGN8668MVWG2 Series GPON ONT User Manual
Version: V1.1.6
CONTENT
1. Product Description
1.1. Product Application -------------------------------------------------------------------------------------------------------------6
1.2. Product Features ---- ------------------------------------------------------------------------------------------------------------6
1.3. Rear View & Rear Interface ---------------------------------------------------------------------------------------------------7
1.4. LED Description ------------------------------------------------------------------------------------------------------------------7
1.5. Wireless Description -----------------------------------------------------------------------------------------------------------8
1.6. Compliance -----------------------------------------------------------------------------------------------------------------------9
1.7. Product Standards --------------------------------------------------------------------------------------------------------------9
1.8. Working environment ---------------------------------------------------------------------------------------------------------10
1.9. System Requirements ---------------------------------------------------------------------------------------------------------10
1.10. Safety Notice ------------------------------------------------------------------------------------------------------------------10
3. Status
3.1. Device Info -----------------------------------------------------------------------------------------------------------------------12
3.2. Internet Info ---------------------------------------------------------------------------------------------------------------------12
3.2.1. IPV4 Status ------------------------------------------------------------------------------------------------------------12
3.2.2. IPV6 Status ------------------------------------------------------------------------------------------------------------13
3.2.3. EPON Info --------------------------------------------------------------------------------------------------------------13
3.3. LAN & WLAN---------------------------------------------------------------------------------------------------------------------15
3.3.1. WLAN Status-----------------------------------------------------------------------------------------------------------15
3.3.2. LAN Status--------------------------------------------------------------------------------------------------------------15
3.3.3. USB STATUS------------------------------------------------------------------------------------------------------------15
3.4. VoIP Info -----------------------------------------------------------------------------------------------------------------------16
3.4.1. Phone Status -----------------------------------------------------------------------------------------------------------16
3.4.2. Phone NUMBER-------------------------------------------------------------------------------------------------------16
3.5. Remote Status--------------------------------------------------------------------------------------------------------------------17
3.5.1. Interaction --------------------------------------------------------------------------------------------------------------17
3.5.2. Processing Status------------------------------------------------------------------------------------------------------17
4. INTERNET
4.1. WAN -----------------------------------------------------------------------------------------------------------------------------17
4.1.1. Configuration Example for PPPOE------------------------------------------------------------------------------19
4.1.2. Configuration Example for STATIC IP--------------------------------------------------------------------------20
4.1.3. Configuration Example for DHCP-------------------------------------------------------------------------------21
Page: 3 / 72
SGN8668MVWG2 Series GPON ONT User Manual
5. Security
5.1. URL FILTER (Access Control List)---------- ------------------------------------------------------------------------------35
5.2. Firewall ------------------------------------------------------------------------------------------------------------------------37
5.2.1. Firewall Level ------------------------------------------------------------------------------------------------------37
5.2.2. ANTI-DOS -----------------------------------------------------------------------------------------------------------37
5.3. MAC Filter -------------------------------------------------------------------------------------------------------------------37
5.4. IP Filter -------------------------------------------------------------------------------------------------------------------------38
6. Application
6.1. DDNS config -------------------------------------------------------------------------------------------------------------------40
6.2. Advanced NAT Config -------------------------------------------------------------------------------------------------------41
6.2.1. ALG SETUP------------------------------------------------------------------------------------------------------------41
6.2.2. DMZ SETUP -----------------------------------------------------------------------------------------------------------42
6.2.3. Virtual Server --------------------------------------------------------------------------------------------------------43
6.3. Upnp Config---------------------------------------------------------------------------------------------------------------------44
6.4. VoIP Config----------------------------------------------------------------------------------------------------------------------45
6.4.1. SIP Basic Config------------------------------------------------------------------------------------------------------45
6.4.2. DIGITMAP config ---------------------------------------------------------------------------------------------------46
6.4.3. VoIP Media-----------------------------------------------------------------------------------------------------------47
6.4.4. SIP Services-----------------------------------------------------------------------------------------------------------49
6.4.5. IMS Service-----------------------------------------------------------------------------------------------------------51
6.4.6. DEBUG CONFIG ------------------------------------------------------------------------------------------------------51
6.5. IGMP Config---------------------------------------------------------------------------------------------------------------------53
6.5.1. IGMP Snooping -------------------------------------------------------------------------------------------------------53
Page: 4 / 72
SGN8668MVWG2 Series GPON ONT User Manual
7. Management
7.1. Change Password --------------------------------------------------------------------------------------------------------------55
7.1.1. Change Password for ‘useradmin ‘ account ------------------------------------------------------------------56
7.1.2. Change Password for ‘telecomadmin‘ account --------------------------------------------------------------56
7.2. Device ----------------------------------------------------------------------------------------------------------------------------57
7.2.1. Device Reboot-------------------------------------------------------------------------------------------------------57
7.2.2. USB Backup-----------------------------------------------------------------------------------------------------------57
7.2.3. RESTORE CONFIG ---------------------------------------------------------------------------------------------------57
7.2.4. Update Software-----------------------------------------------------------------------------------------------------58
7.2.5. BACKUP CONFIG-----------------------------------------------------------------------------------------------------58
7.3. Log---------------------------------------------------------------------------------------------------------------------------------59
7.3.1. Writing Level---------------------------------------------------------------------------------------------------------59
7.3.2. Config Syslog---------------------------------------------------------------------------------------------------------59
7.4. Maintenance--------------------------------------------------------------------------------------------------------------------60
9. Help
9.1. Status Help----------------------------------------------------------------------------------------------------------------------62
9.1.1. Device Help -----------------------------------------------------------------------------------------------------------62
9.1.2. WAN INFO HELP ----------------------------------------------------------------------------------------------------62
9.1.3. LAN INFO HELP -----------------------------------------------------------------------------------------------------62
9.2. Network Help -----------------------------------------------------------------------------------------------------------------63
9.2.1. WAN help ------------------------------------------------------------------------------------------------------------63
9.2.2. LAN HELP ------------------------------------------------------------------------------------------------------------63
9.2.3. MGMT HELP ---------------------------------------------------------------------------------------------------------64
9.2.4. QOS--------------------------------------------------------------------------------------------------------------------64
9.2.5. Time Management-------------------------------------------------------------------------------------------------65
9.2.6. Routing----------------------------------------------------------------------------------------------------------------65
1. Product Description
The SGN8668XXXXX is a series of ITU-T G.984.x based GPON ONT designed for home and Office users. It offers 2 LAN ports that
supports mixed GE and FE ports. Its uplink interface is a GPON SC port, supports 2.5G for downstream and 1.25G for upstream.
The SGN8668MVW series also offers 2 FXS ports and a 300Mbps WiFi Router for VoIP and Home wifi networking applications.
Built for FTTx deployments, it supports powerful home gateway/CPE features, such as Multiple WAN, QOS, VLAN, Firewall, ACL,
etc. It is an Internet Data, Voice and WiFi all-in-one GPON CPE for ISPs deploying Triple Play networks over single fiber.
Page: 6 / 72
SGN8668MVWG2 Series GPON ONT User Manual
Port Description
LED ON/OFF Turn on/Turn off LED Indicators
PON GPON SC Port
Phone1, Phone2 Standard RJ11 ports for VoIP
LAN1, LAN2 10/100Base-Tx and/or 10/100/1000Base-Tx Ethernet LAN Ports
WPS Enable/Disable WPS
WiFi Enable/Disable Wireless AP
Reset Restore to factory default settings
USB USB 2.0 Host Port
DC 12V 12V, 1.5A DC Power input, connecting to Power Adaptor
ON/OFF Switch for Power ON/OFF
Page: 7 / 72
SGN8668MVWG2 Series GPON ONT User Manual
Page: 8 / 72
SGN8668MVWG2 Series GPON ONT User Manual
1.6. Compliance
FCC Class B
CE Mark
Rohs
Page: 9 / 72
SGN8668MVWG2 Series GPON ONT User Manual
Please use the external power supply that is included in the package. Other powers supplies may cause damage to
the device, affect the behavior or induce noise.
Before using the external power supply in the package, please check with home power voltage. Inaccurate power
voltage may cause fire and damage.
Please do not damage the power cord. If power cord or plug is impaired, do not use it, it may cause fire or electric
shock.
The plug-socket combination must be accessible at all times because it serves as the main disconnecting device.
Do not drop, knock or shake it. Rough handling can break internal circuit boards.
Do not install the device in places where there is direct sunlight. Also do not put the device on carpets or cushions.
It may cause fire or breakdown.
Avoid exposure the ONT to high temperature, below 0℃ or high humidity. Avoid wetting the unit with any liquid.
Do not attempt to open it. Non-expert handling of the device could damage it. Consult your authorized dealer for
help, or else it may cause fire, electric shock and breakdown.
Do not use harsh chemicals, cleaning solvents, or strong detergents to clean it. Wipe it with a soft cloth that has
been slightly dampened in a mild soap and water solution.
When lightning, do not touch power plug or device line, it may cause an electric shock.
Do not install this device in an ill-ventilated place.
You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards
involved with electrical circuitry and be familiar with standard practices for preventing accidents.
Page: 10 / 72
SGN8668MVWG2 Series GPON ONT User Manual
Notice: Do not power off the ONT when configuring the ONT through WEB interface. Any termination of power could cause
damage to the SGN8668MVWG2 ONT.
Access to your Router is controlled through two user accounts: telecomadmin and useradmin.The user name
"telecomadmin" has unrestricted access to change and view configuration of your Broadband Router.The user name
"useradmin" can access the Broadband Router, view configuration settings and statistics, as well as, update the router's
software.
Page: 11 / 72
SGN8668MVWG2 Series GPON ONT User Manual
After log in with the Super admin, you can inquiry, configure or modify the settings for the SGN8668MVWG2 ONT.
For some settings, it’s mandatory to reboot the ONT to take the configuration into effect.
3. Status
After log into the SGN8668MVWG2 ONT, you will be direct to the ‘ Status ‘ page. There are 5 sub-options, ‘ Device Info ‘,
‘WAN INFO’, ‘LAN INFO ’, ‘VoIP INFO’, ‘ Remote INFO‘ under the ‘ Status ‘ page.
Page: 12 / 72
SGN8668MVWG2 Series GPON ONT User Manual
Click the ‘ WAN Info ‘ – ‘ IPV6 INFO ‘, you will see the IPV6 internet connection status as below:
If you are connecting through IPV4, there will be no IPV6 internet connection status shown.
Page: 13 / 72
SGN8668MVWG2 Series GPON ONT User Manual
Page: 14 / 72
SGN8668MVWG2 Series GPON ONT User Manual
Page: 15 / 72
SGN8668MVWG2 Series GPON ONT User Manual
Click the ‘ VoIP INFO ‘ – ‘VoIP INFO‘, you will see the registration status for VoIP.
If the status is ‘up’, VoIP is already registered to the SIP server successfully.
If the status is ‘down’, VoIP is not registered to the SIP server.
Page: 16 / 72
SGN8668MVWG2 Series GPON ONT User Manual
4. NETWORK
4.1. WAN
Click ‘WAN‘ – ‘ WAN Config ‘ to configure the internet access/WAN access for your SGN8668MVWG2 GPON ONT.
You can configure PPPOE, DHCP, Static IP, VLAN as your internet connection mode.
Page: 17 / 72
SGN8668MVWG2 Series GPON ONT User Manual
Enable VLAN: Check the box to enable VLAN, you need to enter the IEEE802.1Q VLAN ID if VLAN is enabled.
802.1P: If you want to use IEEE802.1P QOS, please select this option. You can also choose the QOS level here.
User Name: Your PPPOE user name
Password: Your PPPOE password
Service Name: The service name of your ISP
Manual config DS-lite: You can use default automatically connect
Service Mode:Service mode are separated into different values here. The listed services are for TR069, VoIP, and Internet.
You can choose to use different WAN access for the different services.
Bind Port: You can decide which port to be associated with the created WAN access. If you want to use 1 WAN access for
all the available wired LAN and wireless LAN, then please select all the interfaces.
Wait for about 15s, you will have your PPPOE connection established successfully.
Page: 20 / 72
SGN8668MVWG2 Series GPON ONT User Manual
Wait for about 15s, your STATIC IP internet access will be established successfully.
Wait for about 15s, your DHCP internet access will be established successfully.
Wait for about 15s, your VLAN internet access will be established successfully.
Click ‘NETWORK ‘ – ‘BING‘ to configure VLAN binding function which is specially for IPTV VLAN applications.
After done, click ‘ Save/Apply ‘ button to save and apply new settings.
Page: 23 / 72
SGN8668MVWG2 Series GPON ONT User Manual
Page: 24 / 72
SGN8668MVWG2 Series GPON ONT User Manual
You should configure the MAC address and associate it with an available IP Address. After done, the configured IP Address
will be the Static LAN IP address of the device who own the configured MAC address.
After done, please click ‘Apply ‘ button to save and apply new settings.
4.4. Wireless LAN Config
4.4.1. WLAN Config
Page: 25 / 72
SGN8668MVWG2 Series GPON ONT User Manual
Band: The desired wireless band of your wireless router. It is working at 2.4GHz by default
Page: 26 / 72
SGN8668MVWG2 Series GPON ONT User Manual
Channel: The Wireless Channel of your wireless Router. You can manually set it to the required channel
802.11n/EWC: Enabling 802.11n/EWC, the wireless speed will be accelerated
Bandwidth: To determine the wireless bandwidth of your wireless router. It could be set to 20M or 40M
Control Sideband: Control the frequency to be higher or lower than standard Telecom frequencies.
802.11n Rate: To set the Wireless Power Level
802.11n Protection Rate: The 802.11n specification provides protection rules to guarantee that 802.11n transmissions do
not cause interference with legacy stations or access points. By default, these protection mechanisms are enabled.
However, you can turn off these protection mechanisms.
Support 802.11n Client Only: If this option is enabled, then the SGN8668MVWG2 will not be compatible with your
IEEE802.11b/g devices. In such case, the SGN8668MVWG2 support only IEEE802.11n devices.
54g™Rate: This is to enable Broadcom 54G Wireless Chipset, enabling more compatibility to other IEEE802.11b,
IEEE802.11g based devices.
Multicast Rate: To set the wireless transmission power for Multicast applications
Basic Rate: This is to set the wireless transmission power for IEEE802.11b/g
XPress™ Technology: Broadcom's standards-based frame-bursting technology to improve 802.11 wireless LAN
performance. If the WMM (Quality of Service) is enabled, the XPress™ Technology option can also be enabled.
Transmission Power: To set the Wireless Transmission power for the wireless router
WMM(Wi-Fi Multimedia): To enable WiFi Multimedia
WMM Service quality: To enable QOS in Wireless transmission. You can also enable Xpress Technology after enabling WMM
(Quality of Service) Option
WMM APSD: To enable the Power Saving mode in WiFi Multimedia
Save/Apply: Click ‘Apply’ to save and apply new settings.
Page: 28 / 72
SGN8668MVWG2 Series GPON ONT User Manual
Page: 29 / 72
SGN8668MVWG2 Series GPON ONT User Manual
4.6. QOS
4.6.1. QOS Config
Click ‘ NETWORK‘ – ‘QOS ‘ –‘ QOS ’ to config QOS for your SGN8668MVWG2 ONT.
Rule templates: To choose the available templates or to customize the template to determine what services to enable the
QOS for.
Templates Descriptions:
‘TR069,’ – To enable QOS for Internet Data and TR069 service
‘TR069, VoIP, Internet’- To enable QOS for Internet Data, TR069 and VoIP services
Page: 30 / 72
SGN8668MVWG2 Series GPON ONT User Manual
‘TR069, IPTV, Internet’- To enable QOS for Internet Data, TR069 and IPTV services
‘TR069, VoIP, IPTV, Internet’- To enable QOS for Internet Data, TR069, VoIP and IPTV services
‘Custom module’ – To customize the template to determine the services to enable QOS
App Name: The Service Name that you want to enable QOS for, e.g, VoIP, TR069
Queue: The QOS queue for the service specified
Delete: Remove the service from the QOS template
Edit: To edit the service that you want to enable for QOS.
Add Class: Click this button to Edit Service Classification & Edit Flow Classification.
del class: Click this button to delete the configured QOS service and flow classification template
App Class Edit: Check the box to enable edit QOS for TR069 and VoIP service
Sub-menus under Edit Business Category:
app Name: The service that you wan to enable QOS for, you can set either VoIP or TR069 service.
queue: The QOS level that you want to enable for the configured service.
Traffic Class Edit: Check the box to enable edit QOS for different flow/packets.
Page: 31 / 72
SGN8668MVWG2 Series GPON ONT User Manual
Queue: To set the priority for the flow classification that you enabled.
1 is the highest QOS level,
2 is the high QOS level,
3 is the medium QOS level,
4 is the low QOS level
Protocol: To set the IPV4 or IPV6 version for the flow classification.
Classification: To set different service or interface for flow classification
SMAC: To set flow classification for SMAC service
DMAC: To set flow classification for DMAC Service
802.1P: To set based flow classification for IEEE802.1P service
DIP: To set flow classification for DIP service
SPORT: To set flow classification for SPORT service
DPORT: To set flow classification for DPORT service
TOS: To set flow classification for TOS service
DSCP: To set flow classification for DSCP service
WANInterface: To set flow classification for WAN interface
LANInterface: To set flow classification for LAN interface
Minimum: The minimum QOS level for the enabled Service
Maximum: The maximum QOS level for the enabled Service
Protocol: To determine which protocol to enable QOS
After all configurations are done, please click ‘ Save/Apply ‘ button to save and apply new settings.
Page: 32 / 72
SGN8668MVWG2 Series GPON ONT User Manual
Enable Flowcache: Check the box for ‘Enable Flowcache’ to enable Cache for the transmission flow
Save/Apply: To save and apply the enabled or disabled Flowcache.
Auto Sync to NTP Time Servers: Check the box to automatically sync with the available NTP time servers.
Time server Type: To determine the way to connect to NTP servers.
NTP Server Synchronize Interval[Unit:s]: Setting time sync interval.
Primary NTP Time Server: Select the available NTP servers for your NTP Server 1.
Secondary NTP Time Server: Select the available NTP servers for your NTP Server 2.
Third NTP Time Server: Select the available NTP servers for your NTP Server 3.
Fourth NTP Time Server: Select the available NTP servers for your NTP Server 4.
Fifth NTP Time Serve: Select the available NTP servers for your NTP Server 5.
Note: You can also specify the URL or IP address for your Time Servers if they are not shown in the options list.
Time Zone: To choose the appropriate Time Zone for your SGN8668MVWG2 GPON ONT.
Save/Apply: Click ‘ Save/Apply ‘ button to save and apply new settings.
4.8. Routing
4.8.1. Static Config
Click ‘ NETWORK ‘ – ‘Routing ‘– ‘Static Routing ‘, click ‘ Add’ button to config a Static route for your SGN8668MVWG2 ONT:
Page: 33 / 72
SGN8668MVWG2 Series GPON ONT User Manual
DstIP: The destination address that you want to add a route for
Subnet Mask: The Subnet Mask for your Destination Routing address
Use Gateway Address: The Gateway IP Address for your destination routing address
Use Interface: To determine which interface to enable the Static Route for
Save/Apply: Click ‘ Save/Apply ‘ button to save and apply new settings.
Page: 34 / 72
SGN8668MVWG2 Series GPON ONT User Manual
Add: Click ‘ Add ‘ to add an IPV6 Static Route for your SGN8668MVWG2 ONT
Destination IPV6 Address: Input the destination IPV6 address that you want to add a Static Route for
Subnet Prefix Length: To determine the length for your IPV6 Subnet Prefix
Gateway IPV6 Address: Input the Gateway IP address for your destination IPV6 address
Metric: To determine the Metric for your IPV6 Static Route (Value in between 0-4261412864)
Used Interface: To determine which WAN interface to associated with the Static IPV6 Route
Save/Apply: Click ‘ Save/Apply ‘ button to save and apply new settings.
5. Security
5.1. URL FILTER (Access Control List)
Click ‘ Security ‘ – ‘Wan ACL‘– to Enable or Disable URLs to pass through the WAN interface.
Page: 35 / 72
SGN8668MVWG2 Series GPON ONT User Manual
Url Address Filter: Check the box on ‘Enable’ to enable URL filter, Check the box on ‘Disable’ to disable URL Filter
URL List Type:
A. Blacklist: Check the box on ‘Blacklist’ and Click ‘Add’ button to specify a URL in blacklist.
B. Whitelist : Check the box on ‘Whitelist’ and Click ‘ Add ‘ button to specify a URL in whitelist.
Page: 36 / 72
SGN8668MVWG2 Series GPON ONT User Manual
URL Address: The URL address that you want to allow access with.
Port: The port number that you want to enable for the whitelist URL.
Save/Apply: Click ‘ Save/Apply ‘ button to save and apply new settings.
5.2. Firewall
5.2.1.Firewall Level
Click ‘ Security ‘ – ‘Security Level ‘– to set the firewall level for the multiple services pass-through the SGN8668MVWG2
ONT.
Click ‘Save/Apply’ to save and apply new settings.
5.2.2. ANTI-DOS
Click ‘ Security ‘ – ‘Firewall ‘– ‘ANTI-DOS’ to prevent SGN8668MVWG2 ONT from DOS attack.
Page: 37 / 72
SGN8668MVWG2 Series GPON ONT User Manual
5.4. IP Filter
Click ‘ Security ‘ – ‘IP Filter ‘– to creat a firewall filter based on a specific port.
A. Blacklist (LAN=>WAN outgoing Filter): To disable the specified port to pass through LAN to WAN
B. White list (WAN-LAN into the filter): To enable the specified port to pass through WAN to LAN
Page: 39 / 72
SGN8668MVWG2 Series GPON ONT User Manual
6. Application
6.1. DDNS config
Click ‘ Application ‘ – ‘DDNS config ‘– to creat a Dynamic DNS for your SGN8668MVWG2 ONT.
Page: 40 / 72
SGN8668MVWG2 Series GPON ONT User Manual
Enable DNS Service: Check the box to enable Dynamic DNS service
Add: Click ‘Add’ to add a Dynamic DNS connection
Click ‘ Application ‘ – ‘Advanced NAT ‘- ‘ALG SETUP ‘– to config the Applicatoin Layer Gateway for your SGN8668MVWG2
ONT.
Page: 41 / 72
SGN8668MVWG2 Series GPON ONT User Manual
Page: 42 / 72
SGN8668MVWG2 Series GPON ONT User Manual
Page: 43 / 72
SGN8668MVWG2 Series GPON ONT User Manual
Select WAN Connection: The WAN interface that you want to enable with Virtual Host Server service
Service Name: Select the services that you want to enable with Virtual Host Server service
Server IP Address: The LAN IP address that you want to enable for Virtual Host Server
External Port Start: The outbound beginning port of your Virtual Host server.
External Port End: The outbound ending port of your Virtual Host Server
Internal Port Start: The outbound beginning port of your Virtual Host server.
Internal Port End: The outbound ending port of your Virtual Host Server
Save/Apply: Click ‘ Save/Apply ‘ button to save and apply new settings.
Page: 44 / 72
SGN8668MVWG2 Series GPON ONT User Manual
Voice binding interface name: Check the box to select the WAN connection interface for your VoIP service.
Country: Choose the country/territory name available in the template.
Sip local port (range:0-65535): To input the port number for SIP, generally default SIP port is 5060
Enable Primary SIP Proxy: Check the box to enable register to a SIP Server
Primary SIP Proxy Address: The primary SIP Server address, can be Host name or IP address
Primary SIP Proxy port: The primary SIP port, the default SIP port is 5060
Enable Primary SIP Registration: Check the box to enable primary SIP registration.
SIP Account 1, 2: There are two SIP accounts able to be registered with SGN8668MVWG2 simultaneously.
Enabled Account: Check the boxes to enable the associated SIP 1 and SIP 2 accounts.
User Number: The SIP User name
authentication password: The password for your SIP Account
Preferred ptime: The preferred inquiry time (ms)
Preferred codec 1, 2, 3, 4: The preferred Voice codecs
Save/Apply: Click ‘ Save/Apply ‘ button to save and apply new settings.
Page: 45 / 72
SGN8668MVWG2 Series GPON ONT User Manual
enable basic digitmap: Enable Standard Digital Map/Dial plans for VoIP service
Digital Map Match Mode: The matching mode of the specified dialing plans.
inter-digit short timer: Specify the short-timer time
inter-digit long timer: Specify the max timer time
first digit timer: Specify the time of not dialing after you pick up the phone
Page: 46 / 72
SGN8668MVWG2 Series GPON ONT User Manual
Enable T.38 Redundance: Check the box to enable T.38 fax redundancy.
Page: 47 / 72
SGN8668MVWG2 Series GPON ONT User Manual
Enable VBD redundance: Check the box to enable VBD (Voice Band Data) redundancy
fax negotiation mode: Set the fax session mode
Fax codec: Set the codec for Fax
Enable T38 Fax: Enable T.38 Fax
Enable G711 Fax: Enable Fax with G.711 codec
Enable VAD: Check the box to enable VAD (Voice Activation Detection)
enable Polarity Reverse:Enable Polarity Reverse
BAC switch time [range: 0 to 30. Units:s]: BAC switch time.
RFC2198 Payload Value[range:96~127]: Set the value of RFC2198 payload, ranges in between 96-127
howler tone timer[unit: sec]: Set the howler tone time
busy tone timer[unit: sec]: Set the busy tone time
No Answer timer [unit: sec]: Set the no answer tone time
DTMF Transfer Configure: Set the DTMF mode of VoIP
valid DTMF transfer payload type[range:96-127]: Set the valid DTMF transfer payload type
callerID display mode: Set the Caller ID mode
Click ‘ Application ‘ – ‘VoIP Config ‘– ‘SIP Services ‘ to configure the VoIP telephone features.
Check the boxes available in the above template to enable different SIP telephone features.
After done, click ‘Apply’ button to save and apply new settings.
URI "*" escape: Check the box to enable URL and ‘*’ Escape config
URI "#" escape: Check the box to enable URL and ‘#’ Escape config
RING local in receiving 18x without SDP: Check the box to disable SDP in 18x ring process
enable initial logout: Check the box to enable SIP initial cancellation
Page: 49 / 72
SGN8668MVWG2 Series GPON ONT User Manual
Notice: This is a feature available with IMS server configurations. (Not specified).
Page: 50 / 72
SGN8668MVWG2 Series GPON ONT User Manual
Log server IP: The Server Address that you want to store your SIP Syslog
Log server port: The port number of your SIP Syslog server
Enabled Syslogd: Check the box to enable SIP Syslog
Enabled Klogd: Check the box to enable SIP Klog
enable ggxxx serial print: Check the box to enable ggxxx serial print.
Vodsl Console log level: Set the Vodsl console level of your SIP Syslog
GEN_SYS_LOG: To determine the general system log level
STACK_LOG: To determine the STACK Log level
Call_Control_LOG: To determine the Call Control Log level
REG_LOG: To determine the Registration Log level
Page: 51 / 72
SGN8668MVWG2 Series GPON ONT User Manual
Click ‘ Application ‘ – ‘IGMP Config ‘– ‘IGMP Snooping ‘ to set up IGMP Snooping for your SGN8668MVWG2 ONT.
Enable IGMP Snooping: Check the box to enable IGMP Snooping of your ONT.
Apply: Click ‘ Apply ‘ button to save and apply new settings.
Page: 52 / 72
SGN8668MVWG2 Series GPON ONT User Manual
WAN Interface: The WAN interface that you will enable for the IGMP Server
Enable IGMP Proxy: Check the box to enable IGMP Server
Save/Apply: Click ‘ Save/Apply ‘ button to save and apply new settings.
Enable MLD Snooping : Check the box to enable MLD ( Multicast Listener Discover ) Snooping
Save/Apply: Click ‘ Save/Apply ‘ button to save and apply new settings.
6.6.2. MLD Proxy
Click ‘ Application ‘ – ‘MLD Config ‘– ‘MLD Proxy ‘ to enable MLD Proxy for your SGN8668MVWG2 ONT.
Page: 53 / 72
SGN8668MVWG2 Series GPON ONT User Manual
WAN Interface: The IGMP WAN interface that you will enable for the MLD Server
Enable MLD Proxy: Check the box to enable MLD Server
Save/Apply: Click ‘ Save/Apply ‘ button to save and apply new settings.
Storage directory of download file: Specify the downloading directory of your USB Storage device
User Name: Your remote FTP User name
Password: The password for your remote FTP server
Port: The port number specified for your remote FTP Server
Remote URL: The URL that you download from
Download: Click ‘Download’ button to start downloading files to your USB storage device.
7. Management
7.1. Change Password for ‘telecomadmin’ and For ‘useradmin’ Accounts
7.2. Device
7.2.1. Device Reboot
Click ‘Management ‘ – ‘Device ‘-‘Device Reboot’ to restart your SGN8668MVWG2 ONT.
Click ‘Management ‘ – ‘Device ‘ – ‘USB Backup’ to back the configuration file to your USB Storage device.
Page: 57 / 72
SGN8668MVWG2 Series GPON ONT User Manual
Click on the ‘Browse’ button,Select a file location,And the Click ‘backup settings’ button, You may save your router configurations
to a file on your PC.
7.3. LOG
7.3.1. log Level
Click ‘Management ‘ – ‘log‘ –‘log Level’ to manage syslog of your SGN8668MVWG2 GPON ONT.
Page: 58 / 72
SGN8668MVWG2 Series GPON ONT User Manual
Log: Check the box to enable or disable Log for your SGN8668MVWG2 ONT
Log Level: To determine which type of log to be recorded in the log file
Display Level: To determine which type of log to be displayed in the log file
Mode: To determine either to enable local or remote syslog.
Server IP address: The Server that you will store the Logs
Server UDP Port: The port number for the Server which you will store up the logs.
Save/Apply: Click ‘ Save/Apply ‘ button to save and apply new settings.
7.3.2.System record
Click ‘Management ‘ – ‘LOG‘ – ‘log info ‘ to check or manage logs of your SGN8668MVWG2 GPON ONT.
Access record: Click the ‘ Access record’ button to view the access logs of your ONT.
Security records: Click the ‘ Security records’ button to view the Security logs of your ONT.
Create log File: Click the ‘Create log File’ button to compose a new syslog file.
Clear History: Click the ‘Clear History’ button to clear all access logs and security logs of your ONT.
7.4. Maintenance
Click ‘Management ‘ – ‘Maintenance ‘ to send new data to ACS server.
Page: 59 / 72
SGN8668MVWG2 Series GPON ONT User Manual
This function is for TR-069 management, it’s for manually provisioning new configurations/data to the remote ACS server.
Page: 60 / 72
SGN8668MVWG2 Series GPON ONT User Manual
Page: 61 / 72
SGN8668MVWG2 Series GPON ONT User Manual
Test: Click the ‘ Test ‘ button to manually send message to a remote TR069 ACS Server.
9. Help
9.1. Status Help
Page: 63 / 72
SGN8668MVWG2 Series GPON ONT User Manual
9.2.3.MGMT HELP
Click ‘ Help ‘ – ‘network ‘ – ‘MGMT HELP’ to view the help information of MGMT Configuration.
9.2.4. QOS
Click ‘ Help ‘ – ‘network ‘ – ‘QOS help ’ to view the help information of QOS Configuration.
Page: 64 / 72
SGN8668MVWG2 Series GPON ONT User Manual
9.2.7. Routing
Click ‘ Help ‘ – ‘network ‘ – ‘Routing help’ to view the help information of Routing Configurations.
Page: 65 / 72
SGN8668MVWG2 Series GPON ONT User Manual
Page: 66 / 72
SGN8668MVWG2 Series GPON ONT User Manual
Page: 67 / 72
SGN8668MVWG2 Series GPON ONT User Manual
9.4.5. Voice
Click ‘ Help ‘ – ‘Application ‘ – ‘Voice Help ’ to view the help information of VoIP.
Page: 69 / 72
SGN8668MVWG2 Series GPON ONT User Manual
9.5.4. Maintenance
Click ‘ Help ‘ – ‘Maintenance ‘ – ‘Maintenance help ’ to view the help information of maintenance.
Page: 70 / 72
SGN8668MVWG2 Series GPON ONT User Manual
Copyright Notice:
No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated
into any language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or
otherwise without the prior written permission of VALENET.
Disclaimer Notice:
No license is granted, implied or otherwise, under any patent or patent rights of VALENET. VALENET, makes no
warranties, implied or otherwise, in regard to this document and to the products described in this document. The
information provided by this document is believed to be accurate and reliable to the publication date of this
document. However, VALENET assumes no responsibility for any errors in this document. Furthermore, VALENET,
Page: 71 / 72
SGN8668MVWG2 Series GPON ONT User Manual
assumes no responsibility for the use or misuse of the information in this document and for any patent
infringements that may arise from the use of this document. The information and product specifications within
this document are subject to change at any time, without notice and without obligation to notify any person of
such change.
Page: 72 / 72