Professional Documents
Culture Documents
DRUM PUMP 50 HZ CATALOGUE PDF
DRUM PUMP 50 HZ CATALOGUE PDF
Drum Pumps
50 Hz
Pumps Motors
ISO 9001 Company
Pumping Solution
Contents
Drum pumps LDP
Electric & pneumatic drum pumps
Introduction 4
Applications 4
Features and benefits 4
Type key - pump 5
Type key - motor 5
Modular design 5
Design features 6
Pump set 1 - Stainless steel AISI 316 7
Pump set 2 - CPVC (Chlorinated Polyvinyl Chloride) 8
Pump set 3 - PP (Polypropylene) 9
Pump set 4 - PVDF (Polyvinylidene Fluoride) Kynar® 10
Motors 11
Accessories 12
Vacuum pumps
Introduction 16
Applications 16
Features and benefits 16
Technical specifications 16
Pail pumps
Introduction 17
Applications 17
Features and benefits 17
Technical specifications 17
Gallon pumps
Introduction 18
Applications 18
Features and benefits 18
Technical specifications 18
3
Electric & pneumatic drum pumps
Drum pumps LDPTS, LDPTC, LDPTP, LDPTK, LDPMA, LDPMB
Introduction Applications
The Lubi electric and pneumatic drum pumps are centrifugal These pumps are used for pumping out liquids from drums,
and self priming pumps, which provides a safe and accurate barrels, large storage vessels, stainless steel tanks, totes, etc.
way to transfer liquids from drums, containers, tanks and totes.
Drum pumps are widely used by different sectors such as:
Pumps have vertical suction and horizontal discharge port.
• Chemical plants
These are lightweight, handy and extremely powerful
devices suitable for transferring thin to low viscous, neutral • Food processing plants
or corrosive, aggressive & non-aggressive, non-flammable
• Packaging plants
and non-explosive liquids. Designed for portable and static
use the pumps are particularly suitable for intermittent • Plating
operation.
• Semiconductor
The state-of-the-art design and high efficiency motors offer
an accurate and cost effective alternative to the hazards of • Waste water treatment
handling liquids. Modular concept design provides
• Pharmaceutical
interchangeability of Lubi various tubes of different material
to the standard high speed Lubi electric or air motor. • Laboratories
The drum pumps eliminate the need to turn over barrels • Automotive industries
or drums to remove the liquid inside.
• Agriculture.
The pumps consists of:
Features and benefits
• Pump tube These pumps are designed specially for drums, vats, totes,
• Electric or air motor containers, carboys, open vessels up to 1.5 mtrs (60") deep.
Pumps can be driven by either electric motor or air motor. • High quality components
Lubi offers wide range of material variant for pump tubes as • Light weight, portable
suitable for different types of pumped liquids.
• Easy to install, user friendly operation
Pump tubes are available in four basic versions as
• Ergonomically designed handle
described below:
• Safe chemical transfer, an alternative to manual - minimizes
• Stainless steel AISI 316 pump danger of spills, vapors, burns, health, environmental,
• CPVC (Chlorinated Polyvinyl Chloride) pump liability concerns
• PP (Polypropylene) pump
• PVDF (Polyvinylidene Fluoride) Kynar® pump • Pulsation free
• Pump operated with high speed electric motor • Operates by AC electric motor or pneumatic air motor.
(10000 rpm at 50 Hz)
• Pump operated with air motor. • Few parts - maintenance friendly
4
Electric & pneumatic drum pumps
Drum pumps LDPTS, LDPTC, LDPTP, LDPTK, LDPMA, LDPMB
Type key - Pump Type key - Motor
Example LDP TS 4 Example LDP MA 07 V
LDP series
Lubi Drum pump
5
Electric & pneumatic drum pumps
Drum pumps LDPTS, LDPTC, LDPTP, LDPTK, LDPMA, LDPMB
Design features
Coupling
Ball bearing
Inner tube
Inner tube
Impeller
O-ring
6
Electric & pneumatic drum pumps
Drum pumps Pump set 1- Stainless steel AISI 316
Drum pumps for light oils
Lubi's Stainless steel AISI 316 pump set is engineered for
transferring light oils and suitable chemicals.
Robust stainless steel AISI 316 construction offers excellent
strength and durability.
Common applications
• Light machining oils
• Transmission fluid
Technical specifications
Motor type : LDPMA (Electric motor) or LDPMB (Air motor)
Pump tube type : LDPTS (Stainless steel AISI 316)
(pump assembly)
Pump length : 1000 mm (39"), 1200 mm (47")
Pump design : Sealless centrifugal
Wetted parts : S.S AISI 316, Carbon filled PTFE
Discharge options : 25 mm (1") / 19 mm (3/4") hose barb
Hose : 1.8 mtrs (6 ft), I.D. 25 mm (1") PVC
Dispensing nozzle : 25 mm (1"), PVDF
Shaft : Stainless steel AISI 316
Barrel adapter : Stainless steel
Storage bracket : Steel
Max. flow rate : 69 l/min (18 USgpm) based on water
Max. pressure : 19.3 mtrs. (63 ft)
Max. temperature : +80°C (+175°F)
Max. viscosity : 1000 cps
Max. specific gravity: 1.8
Performance curves
0 4 8 12 16 Q (USgpm)
25 80 35
Based on water at 21°C (70°F) LDPTS
2 50 Hz 30
20
ISO 9906 Annex A 60
LDPTS: S.S 316 pump tube 25
LDPMA: Electric motor
LDP
p (PSI)
1.5
p (bar)
H mts.
with 40
1 LDP 15
10 MA
LDPT 20
10
0.5 5 S wit
h LDP
MB 5
0 0 0 0
0 20 40 60 Q (l/min)
0 0.2 0.4 0.6 0.8 1 Q (l/sec)
3
0 0.8 1.6 2.4 3.2 4 Q (m /h)
Note: While ordering pump set, please mention ordering code separately for both pump type and motor type. While ordering only pump or only motor,
please mention ordering code for only pump type or only motor type respectively. Type keys for pump type and motor type are available on page 5.
Discharge hose, Trigger nozzle, Strainer, Barrel adapter and Wall bracket have to be ordered separately. Kindly refer page No.12 for part nos.
7
Electric & pneumatic drum pumps
Drum pumps Pump set 2 - CPVC (Chlorinated Polyvinyl Chloride)
Drum pumps for water treatment chemicals
Lubi's CPVC pump set is engineered for transferring corrosive
chemicals commonly used in the water treatment industry.
Robust CPVC construction offers excellent durability and
chemical resistance.
Common applications
• Sodium Hypochlorite • Potassium Hydroxide
• Calcium Chloride • Sodium Bromide.
• Calcium Hydroxide
Technical specifications
Motor type : LDPMA (Electric motor) or LDPMB (Air motor)
Pump tube type : LDPTC (CPVC)
(pump assembly)
Pump length : 1000 mm (39"), 1200 mm (47")
Pump design : Sealless centrifugal
Wetted parts : CPVC, Carbon filled PTFE, Hastelloy
Discharge options : 25 mm (1") / 19 mm (3/4") hose barb
Hose : 1.8 mtrs (6 ft), I.D. 25 mm (1") PVC
Dispensing nozzle : 25 mm (1"), Polypropylene
Shaft : Hastelloy
Barrel adapter : Polypropylene
Storage bracket : Steel
Max. flow rate : 69 l/min (18 USgpm) based on water
Max. pressure : 19.3 mtrs. (63 ft)
Max. temperature : +88°C (+190°F)
Max. viscosity : 1000 cps
Max. specific gravity: 1.8
Performance curves
0 4 8 12 16 Q (USgpm)
25 80 35
Based on water at 21°C (70°F) LDPTC
2 50 Hz 30
20
ISO 9906 Annex A 60
LDPTC: CPVC pump tube 25
LDPMA: Electric motor
LDP
p (PSI)
1.5
p (bar)
H mts.
with 40
1 LDP 15
10 MA
LDPT 20
10
0.5 5 C wit
h LDP
MB 5
0 0 0 0
0 20 40 60 Q (l/min)
0 0.2 0.4 0.6 0.8 1 Q (l/sec)
3
0 0.8 1.6 2.4 3.2 4 Q (m /h)
Note: While ordering pump set, please mention ordering code separately for both pump type and motor type. While ordering only pump or only motor,
please mention ordering code for only pump type or only motor type respectively. Type keys for pump type and motor type are available on page 5.
Discharge hose, Trigger nozzle, Strainer, Barrel adapter and Wall bracket have to be ordered separately. Kindly refer page No.12 for part nos.
8
Electric & pneumatic drum pumps
Drum pumps Pump set 3 - PP (Polypropylene)
Drum pumps for acids and alkalis
Lubi's Polypropylene pump set is engineered for transferring
a various types of corrosive liquids.
Robust Polypropylene construction ensures chemical resistance
against light to slightly aggressive chemicals.
Common applications
• Acetic Acid • Nitric Acid (20%)
• Sulfuric Acid
• Hydrochloric Acid (20%)
Technical specifications
Motor type : LDPMA (Electric motor) or LDPMB (Air motor)
Pump tube type : LDPTP (Polypropylene)
(pump assembly)
Pump length : 1000 mm (39"), 1200 mm (47")
Pump design : Sealless centrifugal
Wetted parts : Polypropylene, Carbon filled PTFE, Hastelloy
Discharge options : 25 mm (1") / 19 mm (3/4") hose barb
Hose : 1.8 mtrs (6 ft), I.D. 25 mm (1") PVC
Dispensing nozzle : 25 mm (1"), Polypropylene
Shaft : Hastelloy
Barrel adapter : Polypropylene
Storage bracket : Steel
Max. flow rate : 69 l/min (18 USgpm) based on water
Max. pressure : 19.3 mtrs. (63 ft)
Max. temperature : +55°C (+130°F)
Max. viscosity : 1000 cps
Max. specific gravity: 1.8
Performance curves
0 4 8 12 16 Q (USgpm)
25 80 35
Based on water at 21°C (70°F) LDPTP
2 50 Hz 30
20
ISO 9906 Annex A 60
LDPTP: Polypropylene pump tube 25
LDPMA: Electric motor
LDP
p (PSI)
1.5
p (bar)
H mts.
with 40
1
LDP 15
10 MA
LDPT 20
10
0.5 5 P wit
h LDP
MB 5
0 0 0 0
0 20 40 60 Q (l/min)
0 0.2 0.4 0.6 0.8 1 Q (l/sec)
3
0 0.8 1.6 2.4 3.2 4 Q (m /h)
Note: While ordering pump set, please mention ordering code separately for both pump type and motor type. While ordering only pump or only motor,
please mention ordering code for only pump type or only motor type respectively. Type keys for pump type and motor type are available on page 5.
Discharge hose, Trigger nozzle, Strainer, Barrel adapter and Wall bracket have to be ordered separately. Kindly refer page No.12 for part nos.
9
Electric & pneumatic drum pumps
Drum pumps Pump set 4 - PVDF (Polyvinylidene Fluoride) Kynar®
Drum pumps for concentrated acids and alkalis
Lubi's PVDF pump set is engineered for transferring highly
concentrated and aggressive liquids.
Robust PVDF construction offers excellent durability and
chemical resistance.
Common applications
• Concentrated Nitric Acid • Hydrofluoric Acid
• Sulphuric Acid-66 Baume • Propionic Acid
• Sodium Hypochlorite • Stearic Acid
Technical specifications
Motor type : LDPMA (Electric motor) or LDPMB (Air motor)
Pump tube type : LDPTK (PVDF)
(pump assembly)
Pump length : 1000 mm (39"), 1200 mm (47")
Pump design : Sealless centrifugal
Wetted parts : PVDF, Carbon filled PTFE, Hastelloy
Discharge options : 25 mm (1") / 19 mm (3/4") hose barb
Hose : 1.8 mtrs (6 ft), I.D. 25 mm (1") Modified Cross -
Linked Polyethylene
Dispensing nozzle : 25 mm (1"), PVDF
Shaft : Hastelloy
Barrel adapter : Polypropylene
Storage bracket : Steel
Max. flow rate : 69 l/min (18 USgpm) based on water
Max. pressure : 19.3 mtrs. (63 ft)
Max. temperature : +80°C (+175°F)
Max. viscosity : 1000 cps
Max. specific gravity: 1.8
Performance curves
0 4 8 12 16 Q (USgpm)
25 80 35
Based on water at 21°C (70°F) LDPTK
2 50 Hz 30
20
ISO 9906 Annex A 60
LDPTK: PVDF pump tube 25
LDPMA: Electric motor
LDP
p (PSI)
1.5
p (bar)
H mts.
with 40
1 LDP 15
10 MA
LDPT 20
10
0.5 5 K wit
h LDP
MB 5
0 0 0 0
0 20 40 60 Q (l/min)
0 0.2 0.4 0.6 0.8 1 Q (l/sec)
3
0 0.8 1.6 2.4 3.2 4 Q (m /h)
Note: While ordering pump set, please mention ordering code separately for both pump type and motor type. While ordering only pump or only motor,
please mention ordering code for only pump type or only motor type respectively. Type keys for pump type and motor type are available on page 5.
Discharge hose, Trigger nozzle, Strainer, Barrel adapter and Wall bracket have to be ordered separately. Kindly refer page No.12 for part nos.
10
Electric & pneumatic drum pumps
Drum pumps Motors
LDPMA - High speed electric motor (10000 rpm at 50 Hz)
Model LDPMA07N LDPMA07V
Motor type High speed electric motor High speed electric motor
without variable speed control with variable speed control
Rating 0.75 HP (0.55 kW) 0.75 HP (0.55 kW)
Phase 1 1
Voltage 230 V 230 V
Supply frequency 50 Hz 50 Hz
Rated speed 10000 rpm 10000 rpm
Enclosure class ODP (Open Drip Proof) ODP (Open Drip Proof)
Power cord 6.09 m (20 ft) long 6.09 m (20 ft) long
Duty rating Intermittent Intermittent
11
Electric & pneumatic drum pumps
Drum pumps Accessories
Discharge hose Discharge hose Discharge hose Wall bracket
Part number: LDPA9029 Part number: LDPA9032 Part number: LDPA9044 Part number: LDPA9006
Clear PVC hose Clear Braided PVC hose Chemical hose
25 mm x 32 mm (1" I.D. x 1.25" O.D.) 25 mm x 32 mm (1" I.D. x 1.25" O.D.) 25 mm x 37 mm (1" I.D. x 1.45" O.D.) Stainless steel wall storage
Max. temperature: 66°C (150°F) Max. temperature: 66°C (150°F) Max. temperature: 121°C (250°F) bracket is designed for pump
Max. operating pressure: 2.1 bar (30 psi) Max. operating pressure: 5.2 bar (75 psi) Max. operating pressure: 14 bar (200 psi) storage.
Material of construction: Material of construction: Material of construction:
Polyvinyl Chloride Braided Polyvinyl Chloride Modified Cross - Linked Polyethylene
Part number: LDPA9011 Part number: LDPA9012 Part number: LDPA9043 Part number: LDPA9003
Mesh size: 16 x 2.5 mm Mesh size: 14.7 x 1.3 mm Mesh size: 16 x 2.5 mm Capacity: 56.8 lit. (15 gal.)
(0.63" x 0.098") (0.58" x 0.051") (0.63" x 0.098") Material of construction: HDPE
Material of construction: Material of construction: Material of construction: (High Density Polyethylene )
Polypropylene Stainless steel AISI 316 PVDF (Kynar®)
Part number: LDPA9015 Part number: LDPA9002 Part number: LDPA9017 Part number: LDPA9028
51 mm O.D. (2") 51 mm O.D. (2") 1” O.D. (25mm) Hose barb intake 1” O.D. (25mm) Hose barb intake
Material of construction: Material of construction: Material of construction: Material of construction:
Polypropylene Stainless steel AISI 304 Polypropylene PVDF (Kynar®)
Seal Material : Viton* Seal Material : Viton*
Note: While ordering accessories, please mention pump tube type, part name, part number, description and quantity in the order.
* EPDM seals are available on request.
12
Drum hand pumps
Drum pumps LDPHN, LDPHP
Introduction
The Lubi LDPHN & LDPHP series are thermoplastic, hand
operated, self-priming and double-action piston drum pumps,
which delivers liquids on forward as well as reverse stroke.
It takes less than six cycles to yield a gallon (3.8 litres).
i.e 22 oz. (0.650 literes) per stroke.
13
Heavy-duty electric drum pumps (Auger type)
Drum pumps LDPPA
Introduction
The Lubi LDPPA series are heavy-duty, electric operated,
auger type and self-priming drum pumps, which provides a
safe and accurate way to transfer liquids from drums,
containers, tanks and totes.
Applications
LDPPA pumps are used for pumping out liquids from drums,
barrels, large storage vessels, stainless steel tanks, totes, etc.
• Chemical plants
• Food processing plants Technical specifications
• Packaging plants
• Plating Model LDPPA
• Semiconductor Motor type Capacitor start type, thermally protcted
• Waste water treatment Rating 0.33 HP/0.25 kW
• Pharmaceutical Phase 1
• Laboratories Voltage 230 V
• Automotive industries Supply frequency 50 Hz
• Agriculture. Rated speed 2900 rpm
Enclosure class TEFC (Totally Enclosed Fan Cooled)
Features and benefits Power cord 2.4 m (8 ft) long
Duty rating Continuous
Following are the main features and benefits offered by
Motor bearings Ball, prelubricated and shielded
the LDPPA drum hand pumps.
Pump body Stainless steel AISI 316
Shaft Stainless steel AISI 316
• High quality components
Discharge port Stainless steel AISI 316
• Light weight, portable
Adaptor Polypropylene
• Easy to install, user friendly operation
O-ring Viton
• Ergonomically designed handle
Seal Teflon
• Safe chemical transfer, an alternative to manual - minimizes
Auger Teflon
danger of spills, vapors, burns, health, environmental,
Impeller Teflon
liability concerns
Inlet 1½"
• Teflon internal parts to handle various types of tough liquids
Outlet 3/4"
• Made out of stainless steel AISI 316
Suction tube 900 mm (35½") long
• Pulsation free
Discharge hose EPDM - 1.8 mtrs. (6 ft), I.D. 25 mm (1")
• Inherent flooded suction
For use on 208 lit. (55 gal.) drums
• Operates by continuous duty AC electric motor
Max. flow rate 40 l/min (10.5 USgpm) based on water
• Supplied with bung adapter suitable for MS/Plastic drum
Max. head 3.8 mtrs. (12.5 ft)
• Few parts - maintenance friendly
Max. temperature +60°C (140°F)
• Long lasting
Max. viscosity 5000 cps
• Pumps liquids with viscosity up to 5000 cps.
14
Air-driven piston drum pumps
Drum pumps LDPPP
Introduction
The Lubi LDPPP series are compressed air-operated,
piston reciprocating, medium pressure, self-priming drum
pumps, which are suitable for high flow transfer at short
distance of low to medium viscous liquids, lubricants,
chemicals, adhesive, varnishes, cosmetics and other
suitable fluids.
These pumps have 1:1 pressure ratio. This means that the
air pressure from compressor into the pump is equal to the
fluid pressure coming out of the pump.
Applications
LDPPP pumps are used for pumping out liquids from drums,
barrels, large storage vessels, stainless steel tanks, totes, etc.
15
Vacuum pumps
Drum pumps LDPPV
Introduction
The Lubi LDPPV series are compressed air operated,
universal liquid vacuum pumps, which are used for removing
shop floor liquids such as cutting fluids, waste oil, waste water,
paint sludge, contaminated liquids, etc.
Applications
LDPPV pumps are used for removing shop floor liquids such
as cutting fluids, waste oil, paint sludge, contaminated liquids Technical specifications
which are compatible with pump material.
Model LDPPV
These are widely used by different sectors such as: Type Air-opertaed,
liquid vacuum pump
Inlet 1" NPT
• Laboratories
Outlet 1"
• Chemical plants
Max. air pressure 6.9 bar (100 psi)
• Food processing plants Min. air pressure 4.1 bar (60 psi)
• Packaging plants Air consumption 2.36 CFM (350 l/min)
• Plating Air inlet size 1/4"
• Semiconductor Drum adapter 2"
• Waste water treatment Pump body Rustproof Aluminum
• Pharmaceutical Max. temperature +60°C (140°F)
• Automotive industries Max. viscosity 1400 cps
• Agriculture.
16
Pail pumps
Drum pumps LDPPB
Introduction
The Lubi LDPPB series are thermoplastic, hand operated,
self-priming, piston action Pail pumps, which delivers liquids
on forward stroke.
Applications
LDPPB pumps are used for pumping out liquids which are
compatible with pump material.
17
Gallon pumps
Drum pumps LDPPG
Introduction
The Lubi LDPPG series are thermoplastic, hand operated,
self-priming, piston action Gallon pumps, which delivers liquids
on forward stroke.
Applications
LDPPG pumps are used for pumping out liquids which are
compatible with pump material.
18