Professional Documents
Culture Documents
Howto
Howto
HOWTO:
1: Mount the file "PTC Pro Engineer Wildfire 4.0 CD1.iso" in Power Iso ore
simulare
3: Write down the PTC HostID in a txt document, located in the left corner in the
bottom of the setup screen.
6: Select features, It is recomended that you dont change the deafult features
7: Press next.
8: Now open the Crack folder, and copy the "ptc_li-4.0.dat" file to the "C:" drive
9: Next Open the license file "ptc_li-4.0.dat" in a txt editor (Notpad), and
replace every occurance off
<PTC HOST ID> with your own PTC HostID, (see pt.3)
(The easiset way to do this is to press "Ctrl"+"h". Type in <PTC HOST ID>, and
replace with your own
HostID, then select "Replace all"). Save and exit
10: In the "FLEXnet License Servers" press "Add" and select "Locked License file
(no server running)". Point to the edited license
file "ptc_li-4.0.dat" in your "C:" drive. Then press "OK"
14: Do not start PROE!!!!! Open the Crack folder and run the patch: "ptc.pro
engineer.wildfire.4.0.generic-patch.exe"
15: Serch the files the patch dont find in the install.dr/i486_nt/obj. Ignore the
files you dont find�
(The two first files and the 4.) Exit when Patching is done.
16: You can now start ProE. (PS: You can safely remove the firewall block if asked
so)