Professional Documents
Culture Documents
SC Eh760
SC Eh760
Operating Instructions
The illustrations show SC-EH760 for areas except Australia and N.Z.
Note
The “EB” indication shown on the outside packing
case indicates United Kingdom.
EB EP GN RQT5355-B
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORM-
ANCE OF PROCEDURES OTHER THAN THOSE SPECI-
FIED HEREIN MAY RESULT IN HAZARDOUS RADIATION ¸ Remote control batteries . . . . . . . . . . . . . . . . . . . 2 pcs.
EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR
YOURSELF. REFER SERVICING TO QUALIFIED
PERSONNEL.
RQT5355
More user manuals on ManualsBase.com
Table of contents Safety precautions
Before use
The remote control . . . . . . . . . . . . . . . . . . . . . . . 10
Setting the time . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Turning DEMO off . . . . . . . . . . . . . . . . . . . . . . . . 11 Voltage
Saving power in the standby mode . . . . . . . . . . 11 Do not use high voltage power sources. This can overload the unit
and cause a fire.
Basic operations Do not use a DC power source. Check the source carefully when
setting the unit up on a ship or other place where DC is used.
CDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
The radio: manual tuning . . . . . . . . . . . . . . . . . . 16
The radio: preset tuning . . . . . . . . . . . . . . . . . . 17 AC mains lead protection
Cassette tapes . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Ensure the AC mains lead is connected correctly and not dam-
aged. Poor connection and lead damage can cause fire or electric
Changing sound field and quality shock. Do not pull, bend, or place heavy items on the lead.
Grasp the plug firmly when unplugging the lead. Pulling the AC
Changing sound field and quality . . . . . . . . . . . 20
Using the manual equalizer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 mains lead can cause electric shock.
Using the acoustic image equalizer (3D AI EQ) . . . . . . . . . . . . 21 Do not handle the plug with wet hands. This can cause electric
shock.
Boosting the super woofer . . . . . . . . . . . . . . . . . 21
Enjoying surround sound . . . . . . . . . . . . . . . . . . 22
6CH DISCRETE INPUT [SC-EH760] . . . . . . . . . . . . . . . . . . . . . 24
Foreign matter
DOLBY PRO LOGIC [SC-EH760] . . . . . . . . . . . . . . . . . . . . . . . . 25
VIRTUAL DOLBY SURROUND [SC-EH560] . . . . . . . . . . . . . . . 26 Do not let metal objects fall inside the unit. This can cause electric
SUPER SURROUND [SC-EH760] . . . . . . . . . . . . . . . . . . . . . . . 26 shock or malfunction.
SIMULATED STEREO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Do not let liquids get into the unit. This can cause electric shock or
Surround effects . . . . . . . . . . . . . . . . . . . . . . . . . 27 malfunction. If this occurs, immediately disconnect the unit from the
CENTER FOCUS [SC-EH760] . . . . . . . . . . . . . . . . . . . . . . . . . . 27 power supply and contact your dealer.
VIRTUAL REAR SURROUND [SC-EH760] . . . . . . . . . . . . . . . . 27 Do not spray insecticides onto or into the unit. They contain flam-
MULTI REAR SURROUND [SC-EH760] . . . . . . . . . . . . . . . . . . . 27 mable gases which can ignite if sprayed into the unit.
3D ENHANCED SURROUND [SC-EH760] . . . . . . . . . . . . . . . . . 27
CENTER EFFECT [SC-EH560] . . . . . . . . . . . . . . . . . . . . . . . . . . 28
SURROUND EFFECT [SC-EH560] . . . . . . . . . . . . . . . . . . . . . . . 28 Service
SEAT POSITION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Do not attempt to repair this unit by yourself. If sound is interrupted,
Recording operations indicators fail to light, smoke appears, or any other problem that is not
covered in these instructions occurs, disconnect the AC mains lead
Before recording (Deck 2 only) . . . . . . . . . . . . . 30 and contact your dealer or an authorized service center. Electric
Recording CDs . . . . . . . . . . . . . . . . . . . . . . . . . . 32 shock or damage to the unit can occur if the unit is repaired, disas-
Recording the radio . . . . . . . . . . . . . . . . . . . . . . 33 sembled or reconstructed by unqualified persons.
Tape-to-tape recording . . . . . . . . . . . . . . . . . . . . 33 Extend operating life by disconnecting the unit from the power
source if it is not to be used for a long time.
Timer operations
Using the timers . . . . . . . . . . . . . . . . . . . . . . . . . 34
Convenient functions
Changing the sound range display . . . . . . . . . . 37
Muting the volume . . . . . . . . . . . . . . . . . . . . . . . . 37
Using headphones (not included) . . . . . . . . . . . 37
External unit connections . . . . . . . . . . . . . . . . . 38
Using other equipment . . . . . . . . . . . . . . . . . . . . 39
Enjoy karaoke with CDs and cassettes
(for Australia and N.Z. only) . . . . . . . . . . . . . . 40
Reference
Technical specifications . . . . . . . . . . . . . . . . . . . 41
Troubleshooting guide . . . . . . . . . . . . . . . . . . . . 42
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 3
RQT5355
More user manuals on ManualsBase.com
Caution for AC Mains Lead
This appliance is supplied with a moulded three pin THIS PLUG IS NOT WATERPROOF—KEEP DRY.
mains plug for your safety and convenience.
Before use
CAUTION!
IF THE FITTED MOULDED PLUG IS UNSUIT-
ABLE FOR THE SOCKET OUTLET IN YOUR
HOME THEN THE FUSE SHOULD BE RE-
MOVED AND THE PLUG CUT OFF AND DIS-
POSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRI-
CAL SHOCK IF THE CUT OFF PLUG IS IN-
SERTED INTO ANY 13-AMPERE SOCKET.
IMPORTANT
The wires in this mains lead are coloured in accor-
dance with the following code:
Blue: Neutral, Brown: Live.
As these colours may not correspond with the col- 2. Replace the fuse and close or attach the fuse
oured markings identifying the terminals in your plug, cover.
proceed as follows:
The wire which is coloured Blue must be connected to Figure A
the terminal which is marked with the letter N or col-
oured Black or Blue.
The wire which is coloured Brown must be connected
Fuse
to the terminal which is marked with the letter L or col- (5 ampere)
oured Brown or Red.
Figure B
Fuse
(5 ampere)
4
RQT5355
More user manuals on ManualsBase.com
Installation
A
Locating the components
CD changer [A] Side-by-side set-up
(SL-EH760) or [B] Stacking
CD player Sound processor
(SL-EH560) (SH-EH760/560) Note
³Do not put the CD changer or CD player on the tuner amplifier. Heat
from the tuner amplifier can damage your CDs.
³Left and right front speakers are exactly the same.
Before use
Front speaker (L) Cassette deck Tuner amplifier Front speaker (R)
(SB-EH760/560) (RS-EH760) (SA-EH760/560) (SB-EH760/560)
Use only the supplied speakers.
The combination of the system and the speakers provides the best
sound. Using other speakers can damage the unit and sound quality
will be negatively affected.
B
Caution
³Use the speakers only with the recommended system.
Sound processor
(SH-EH760/560)
Failure to do so may lead to damage to the amplifier
and/or the speakers, and may result in the risk of fire.
Tuner amplifier Consult a qualified service person if damage has
(SA-EH760/560) occurred or if you experience a sudden change in
CD changer (SL-EH760) or performance.
CD player (SL-EH560) ³Do not attempt to attach these speakers to walls using
Cassette deck methods other than those described in this manual.
(RS-EH760)
Placement of center/surround
C »
C
speakers SC-EH760
a Center speaker
Center speaker
(SB-PC75)
Front speaker (left) Front speaker (right) Place the center speaker (a) directly above the television.
(SB-EH760) (SB-EH760)
100 mm Note
The wall or pillar on which the speaker systems are to be attached
should be capable of supporting 5 kg.
5
RQT5355
More user manuals on ManualsBase.com
Basic connections
2 Adhesive tape
Before use
B1
3 5
A1 B2
1 1 (Left)
1
(Right) 4
3 To household
4 6 mains socket
(Left)
The illustrations show SC-EH760 for areas except Australia and N.Z. (Right) 5
A 3 4
4 Tuner amplifier side
2
1 +
1 Gray (i)
-
R
Hold the connector Blue
(i)
from both ends
Connector Red
and pull it out.
2 (i)
(For Australia and N.Z.)
White Black (j)
line Speaker side
2
2
HF Gray (i)
(For Australia and N.Z.)
MF
FM ANT Blue
75∞ LF (i)
GND
1 Red
(i)
6
(For others)
Connector
Appliance
75∞
FM ANT inlet
Approx. 6 mm
6
RQT5355
More user manuals on ManualsBase.com
Optional antenna
connections
Before connection
Use outdoor antennas if radio reception is poor.
³Do not connect the AC mains lead until all other connections
are complete.
³To prepare the AM loop antenna and speaker cables (and FM outdoor antenna
FM antenna for Australia and N.Z.), twist the vinyl tip and pull
off ([A]). Note
³Disconnect the FM indoor antenna.
1 Flat cables. ³The antenna should be installed by a competent technician.
Before use
Keep the cables as flat as possible against the back of the
unit.
FM outdoor antenna
Note
Connect the black connectors to the black terminals and the
blue connector to the blue terminal. Incorrect connection of the
flat cables can damage the unit.
Tuner amplifier
2 FM antenna. A
Fix the other end of the antenna where reception is best. (For Australia and N.Z.)
A FM ANT
3 AM loop antenna. 75∞
5 [SC-EH760]
(For others)
Insertion of connector
Even when the connector is perfectly inserted, depending on AM outdoor antenna
the type of inlet used, the front part of the connector may jut
out as shown in the drawing. Run a piece of vinyl wire horizontally across a window or other con-
However there is no problem using the unit. venient location.
Note Note
The included AC mains lead is for use with this unit only. Do not use it ³Leave the loop antenna connected.
with other equipment. ³Disconnect the antenna when the unit is not in use. Do not use the
antenna during an electrical storm.
For your reference:
Information you enter into the unit’s memory, except for time, remains
intact for up to two weeks after the mains lead is disconnected.
AM outdoor antenna
5–12m
Tuner AM ANT
amplifier LOOP
EXT
7
RQT5355
More user manuals on ManualsBase.com
Front panel controls
A SC-EH760
1 2 3 4 5 67 8 9 :;
»
A Tuner amplifier
1 Standby/on switch (ê/I) . . . . . . . . . . . . . . . . . . . . . . 11, 34, 35
DIGITAL
S.WOOFER
Press to switch the unit from on to standby mode or vice versa. In
VOLUME
UP
standby mode, the unit is still consuming a small amount of
H
œPLAY/œREC
power.
2 Standby indicator (ê)
H/I MODE INPUT SELECTOR TUNER/BAND
DISC 1 DISC 2
DIRECT OPEN
DISC 3 DISC 4 DISC 5 OPEN/CLOSE
»
B CD changer/CD player
DISC E
1
C [SC-EH760]
RANDOM REPEAT EDIT
2
M N
5
g
Green: Indicates that the tray is ready to play its CD or to be
opened.
D Random play button (RANDOM) . . . . . . . . . . . . . . . . . . . . . 15
E Repeat button (REPEAT) . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
J KL M F CD edit button (EDIT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
G [SC-EH760]
Disc direct open buttons
(DIRECT OPEN, DISC 1– DISC 5) . . . . . . . . . . . . . . . . . . . . . 12
H Disc tray open/close button (< OPEN/CLOSE) . . . . . . . . . 12
SC-EH560 I Skip/search buttons (4, 5) . . . . . . . . . . . . . . 13
J Disc tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
K Stop button (º) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
D E FH I L Pause button (;) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
M Play button and indicator (!) . . . . . . . . . . . . . . . . . . . . 12, 32
RANDOM REPEAT EDIT OPEN/CLOSE The color of the indicator depends on the operation taking place.
E
If stopped: orange
M N
»
If playing: green
g
If paused: flashes
J KL M
8
RQT5355
More user manuals on ManualsBase.com
Front panel controls
A
N O P Q R
»
A Cassette deck
N Deck 1 cassette holder open button (< OPEN) . . . . . . . . . 18
O Deck 1 cassette holder
P Fast forward/rewind buttons (6, 5) . . . . . . . . . . . . . . . 19
Q Deck 2 cassette holder
F G
R Deck 2 cassette holder open button (< OPEN) . . . . . . 18, 31
S
EOPEN EOPEN
COUNTER DECK 1/2
@ DOLBY NR REV MODE TAPE EDIT
HREC
PAUSE
Counter reset, display buttons
RESET DISPLAY
Before use
T Deck 1/deck 2 select button (DECK 1/2) . . . . . . . . . . . . 18, 19
U Playback buttons and indicators (", !) . . . . . . . . 18, 32, 33
S T U V WX Y Z The color of the indicators depends on the operation taking place.
If stopped, fast forwarding or rewinding: orange
If playing or recording: green
While carrying out TPS or recording is on standby: flashes
V Stop button (º) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18, 32
W Dolby noise reduction button (DOLBY NR) . . . . . . . . . 18, 31
X Reverse mode button (REV MODE) . . . . . . . . . . . . . . . . 18, 31
B Y Tape edit button (TAPE EDIT) . . . . . . . . . . . . . . . . . . . . . . . 33
SC-EH760 Z Record pause button (´ REC PAUSE) . . . . . . . . . . . . . 32, 33
[ \ ] ^
»
B Sound processor
[ [SC-EH760]
3D AI EQ/
M.EQ BAND
MULTI JOG
9
RQT5355
More user manuals on ManualsBase.com
The remote control
A l u
1
H SLEEP PROGRAM CANCEL
v
»
A Controls
DISC
Buttons 1, 9–;, ], _, ` and g–i function in the same way
1 2 3 w as the controls on the main unit.
j/-/-- l Sleep timer button (SLEEP) . . . . . . . . . . . . . . . . . . . . . . . . . 36
m 4 5 6 m Numbered buttons (1–9, 0, M) . . . . . . . . . . . . 14, 15, 17
n Cursor buttons (2, 1, 3, 4) . . . . . . . . . . . . . . . . . . . . 20, 21
7 8 9 0 o [SC-EH760]
3D AI EQ/M.EQ BAND Channel select button (CH SELECT) . . . . . . . . . . . . . . . 24, 26
Before use
] g p [SC-EH760]
Test button (TEST) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
EQ x q [SC-EH760]
n Input select button (VCR/AUX/6CH INPUT) . . . . . . . . . 24, 39
CH SELECT AV EFFECT
y [SC-EH560]
VCR button (VCR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
o ` r TAPE select, deck 1/deck 2 select button
(TAPE/DECK 1/2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18, 19
p :i s CD pause/Tape reverse playback button
TEST UPRO LOGIC SUPER DIGITAL
_ SURROUND S.WOOFER (2/;) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 18, 32, 33
h VCR/AUX/ TAPE/ TUNER/
z t Muting button (MUTING) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
6CH INPUT DECK 1/2 CD BAND u Program button (PROGRAM) . . . . . . . . . . . . . . . . . . . . . . . . 14
q 9 v Cancel button (CANCEL) . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
r ⁄/g ¤
»
¤
w [SC-EH760]
s { Disc button (DISC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 15
MUTING M N | x EQ button (EQ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 21
t } y AV effect button (AV EFFECT) . . . . . . . . . . . . . . . . . . . . 27–29
∂
VOLUME µ
z CD button (CD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 15
; { CD play/tape forward playback button
(1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 14, 18, 32, 33
| CD/tape stop button (º) . . . . . . . . . . . . . . . . . . . . . . 13, 18, 32
} CD skip/search, tape fast forward/rewind buttons
(4, 5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 19
»
B Batteries
³Insert so the poles (i and j) match those in the remote control.
³Do not use rechargeable type batteries.
B Do not;
³mix old and new batteries.
³use different types at the same time.
³heat or expose to flame.
³take apart or short circuit.
³attempt to recharge alkaline or manganese batteries.
³use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause a fire.
If electrolyte leaks from the batteries, consult your dealer.
Wash thoroughly with water if electrolyte comes in contact with any
part of your body.
R6/LR6
1 AA,UM-3 Remove if the remote control is not going to be used for a long period
of time. Store in a cool, dark place.
Replace if the unit does not respond to the remote control even when
f held close to the front panel.
If the battery lid comes loose, slide it back into place horizontally.
»
C Use
Aim at the sensor, avoiding obstacles, at a maximum range of 7 me-
C ters directly in front of the unit.
Tuner amplifier ³Keep the transmission window and the unit’s sensor free from dust.
³Operation can be affected by strong light sources, such as direct
sunlight, and the glass doors on cabinets.
Do not;
³put heavy objects on the remote control.
7m
³take the remote control apart.
30° 30° ³spill liquids onto the remote control.
10
RQT5355
More user manuals on ManualsBase.com
»
A Setting the time
Before use
2 Within 7 seconds
Press [SET].
3 1 Press [TUNING (X or W)] to set the
time.
The time display can be changed in one minute units by
tapping the buttons, and quickly by holding down the but-
tons.
A 2 Press [SET].
1 H/I
The time is set and the original display is restored.
»
B Turning DEMO off
2
SET
A demonstration of the display is shown if you have not set the clock.
Turn DEMO off to get the most from ECO mode.
3 1 ? TUNING @
Press and hold [CLOCK/TIMER, –DEMO]
until “NO DEMO” is displayed.
Each time you press and hold the button:
NO DEMO (off)bDEMO (on)
2
SET
Saving power in the standby
»
C
mode
1 Press [MODE].
The current mode is displayed.
2 Within 5 seconds
C Press [MODE] to display “ECO”.
Each time you press the button:
1 MODE NORMAL (off)bECO (on)
ECO: The clock is not displayed in the standby mode. The “ê” and
“FPLAY/FREC” indicators still light.
2 Note
The mode can be switched to ECO when the unit is in standby but it
MODE
cannot be switched back to NORMAL.
11
RQT5355
More user manuals on ManualsBase.com
CDs
Normal play
Preparation: Press [ê/I] to turn the unit on.
H/I
4
SC-EH760 1 2 [SC-EH760]
DISC 1–5
3 3 Press [!] to start play.
Play starts from the first track on the disc in the play position
and finishes at the end of the last track on the final disc (see
Basic operations
SC-EH560 12 3 below).
You can start play from another disc by pressing [DISC 1–5].
4 Adjust the volume.
Note
You can not change CDs while a disc is playing.
SC-EH560
3 Track number
Elapsed
play time
DISC
4 UP
VOLUME
12 DOWN
RQT5355
More user manuals on ManualsBase.com
CDs
To pause play
Press [;] during play. The “!” indicator flashes.
M, N Press [;] or [!] to resume play.
Skipping tracks
Press [4] (backward), or [5] (forward).
Play position
twice once once twice
Basic operations
During play
Press and hold [4] (backward), or [5] (forward).
Note
³Skipping is done in the selected order in program play (➡ page 14).
³You cannot skip to tracks already played in random play
(➡ page 15).
b ³You can search only within tracks in program and random play.
»
A CD selection
c Do not;
³use irregularly shaped discs (b).
³attach extra labels and stickers.
³use discs with labels and stickers that are coming off or with adhe-
sive exuding from under labels and stickers (c).
³attach scratch-proof covers or any other kind of accessory.
³write anything on the CD.
³clean CDs with liquids. (Wipe with a soft, dry cloth.)
³use CDs printed with label printers available on the market.
B
»
B To prevent damage
Do not;
³set it on top of magazines, inclined surfaces, etc.
³move the system while tray is opening/closing, or when loaded.
e ³put anything except CDs in trays.
8cm CD ³use cleaning CDs or CDs which are badly warped or cracked.
12cm CD
13
RQT5355
More user manuals on ManualsBase.com
CDs
1 Program play
2
DISC
1 2 3
j/-/--
3
4 5 6
Select up to 24 tracks to play in the order you choose.
7 8 9 0
4
3D AI EQ/M.EQ BAND
Remote control only
EQ
1 Press [PROGRAM].
TEST
VCR/AUX/
UPRO LOGIC
TAPE/
SUPER DIGITAL
SURROUND S.WOOFER
CD
TUNER/
2 [SC-EH760]
Press [DISC].
6CH INPUT DECK 1/2 BAND
CD
5
⁄/g ¤
»
¤
MUTING M N 3 [SC-EH760]
∂
VOLUME µ
Within 10 seconds or so
Basic operations
5 Press [1].
All the tracks are played in the selected order.
3 SC-EH760
1 2 3
DISC PRGM
[A] To cancel
4 5
Press [PROGRAM].
“CLEAR” is displayed and all the tracks are canceled. If a track was
playing, play continues to the end of the disc.
4 1
7
2
8
3
9
j/-/--
0
Programmed
track no.
Programmed
order
“FULL” is displayed
If 24 tracks have been programmed.
DISC PRGM
4 5 6
j/-/--
[A] To cancel tracks
7 8 9 0
3D AI EQ/M.EQ BAND
1. Press [CANCEL].
EQ
2. Select the track with [4] or
A particular track
CH SELECT AV EFFECT
[5] then press [CANCEL].
3. Press [CANCEL] again.
TEST UPRO LOGIC SUPER DIGITAL
SURROUND S.WOOFER All tracks Press [PROGRAM] or [º] while stopped.
VCR/AUX/ TAPE/ TUNER/
6CH INPUT DECK 1/2 CD BAND
⁄/g ¤
»
¤
To program the track you are listening to
»
MUTING M N
14
RQT5355
More user manuals on ManualsBase.com
CDs
A
H SLEEP PROGRAM CANCEL
1 2 3
j/-/--
3
3D AI EQ/M.EQ BAND
»
EQ
[SC-EH760]
TEST UPRO LOGIC SUPER DIGITAL
Starts normal play from a selected track on a selected disc to the last
SURROUND S.WOOFER
track of the final disc (➡ page 12).
VCR/AUX/ TAPE/ TUNER/
6CH INPUT DECK 1/2 CD BAND
[SC-EH560]
CD
⁄/g ¤
»
¤
Starts normal play from a selected track to the last track.
1 [SC-EH760]
Basic operations
DISC
Press [DISC].
2 [SC-EH760]
2 SC-EH760
1 2 3
DISC
Within 10 seconds or so
Press [1]–[5] to select the disc.
4 5
3 Select the track with the numbered
buttons.
For tracks numbered 10 and over, press [L] then the two
3 1
4
2
5
3
6
j/-/--
DISC
digits.
»
7 8 9 0
B Random play
[SC-EH760]
Plays the tracks of all discs once each in random order.
[SC-EH560]
Plays the tracks once each in random order.
INPUT SELECTOR
Press [RANDOM].
SC-EH760
RANDOM REPEAT To cancel
Press [RANDOM].
“RANDOM” goes out.
RANDOM REPEAT
SC-EH560
»
C Repeat play
[SC-EH760]
Repeats all tracks on all discs or all programmed tracks.
[SC-EH560]
Repeats all tracks or programmed tracks.
RANDOM
To cancel
Press [REPEAT].
“`” goes out.
C SC-EH760 SC-EH560
DISC
To repeat only your favorite track(s)
REPEAT REPEAT 1 Program the track(s) you want (➡ page 14).
2 Press [REPEAT] and make sure “`” is displayed.
3 Press [!]. Play will start.
15
RQT5355
More user manuals on ManualsBase.com
The radio: manual tuning
Radio stations can be tuned manually by selecting the station’s fre-
quency or they can be preset into channels to make it easy to tune
with the tuner amplifier or the remote control (➡ page 17).
H/I 2 FMMONO
AUTO/
13 4 Preparation: Press [ê/I] to turn the unit on.
1 TUNER/BAND
MHz
4
ceived.
3 MHz
³To cancel auto tuning, press [TUNING (X or W)] once again.
»
A If noise is excessive in FM
B RDS
RDS broadcasting
»
PS DISP MODE PTY
RDS PS
B [SC-EH760\for\areas\except\Australia\and\N.Z.]
[SC-EH560\for\areas\except\United\Kingdom]
TUNED RDS PTY ST
This unit can display the text data transmitted by the radio data sys-
tem (RDS) available in some areas.
If the station you are listening to is transmitting RDS signals, “RDS”
will light up on the display.
PTY displays
Displaying the name of a broadcasting station
NEWS VARIED FINANCE COUNTRY Press [PS-DISP MODE] to display a station name.
AFFAIRS POP M CHILDREN NATIONAL Press [DISP MODE-PTY] to display a program type.
Each time you press the button:
INFO ROCK M SOCIAL A OLDIES Frequency displaycPS or PTY display
¤
SPORT M.O.R M RELIGION FOLK M If the PS display isn’t shown
EDUCATE LIGHT M PHONE IN DOCUMENT Press and hold [PS-DISP MODE] for about 4 seconds.
The mode switches every time the button is pressed and held:
DRAMA CLASSICS TRAVEL TEST
MODE 1cMODE 2
CULTURE OTHER M LEISURE ALARM
Note
SCIENCE WEATHER JAZZ RDS displays may not be available if reception is poor.
16
RQT5355
More user manuals on ManualsBase.com
The radio: preset tuning
Choose either automatic presetting, which presets all the stations the
SET tuner amplifier can receive, or manual presetting, which allows you to
select the stations to preset and the order they are to be preset in.
There are 39 channels available for presetting.
»
A Automatic presetting
Do the following once each for FM and AM.
Preparation: Tune to the frequency presetting is to begin at
(➡ page 16).
TUNING MODE
24 3 Hold down [SET].
A SET
Release the button when “AUTO MEMORY” appears.
The tuner presets all the stations it can receive into the channels in
ascending order. FM stations are preset into channels 1 to 39, and
Basic operations
AM stations are preset into channels 21 to 39.
“SET OK” is shown when presetting is complete and the last station
to be preset is played.
MHz
“ERROR” is displayed if the tuner doesn’t receive any stations. Do
presetting manually if this happens (see below).
Note
AM stations replace any FM channels that were preset in channels
21 to 39.
B SET
»
B Manual presetting
2 Preset the stations one at a time.
4 Press [SET].
DISC
»
1 2 3
j/-/--
4 5 6
C Selecting channels
7 8
3D AI EQ/M.EQ BAND
9 0
2
EQ
On the remote control
CH SELECT AV EFFECT
1 Press [TUNER/BAND].
TEST
VCR/AUX/
UPRO LOGIC
TAPE/
SUPER DIGITAL
SURROUND S.WOOFER
TUNER/
2 Press the numbered buttons to select
1 the channel.
6CH INPUT DECK 1/2 CD BAND
⁄/g ¤
»
¤
MUTING M N
For channels 1 to 9 press the corresponding number.
For channels 10 or over press [L], then the two digits.
3
∂
VOLUME µ
7
2
8
3
9
j/-/--
0
Preset channel
3 ∂ VOLUME µ
17
RQT5355
More user manuals on ManualsBase.com
Cassette tapes
1 EOPEN
Forward side
[A] To change the deck to be used
Press [DECK 1/2] to select the deck you want to play.
Tape facing down
To listen to 2 tapes consecutively
Insert a tape into each deck and select “f”. Both tapes will be
played 8 times each.
2 DOLBY NR
Cassette tape selection and care
1 Î
NR
The unit can correctly play the following types. It identifies the type
automatically.
✔
3 REV MODE
Normal position/TYPE I
High position/TYPE II ✔
1 Î
NR Metal position/TYPE IV ✔
³Tapes exceeding 100 minutes are thin and can break or get caught
in the mechanism.
4 Tape direction
³Tape slack can get caught up in the mechanism and should be tak-
en up before the tape is played.
³Endless tapes can get caught up in the deck’s moving parts if used
incorrectly. Use tapes appropriate to this unit’s auto-reverse mech-
anism.
5 UP
VOLUME
DOWN
A
DECK 1/2
2 Î
NR
Deck in use
18
RQT5355
More user manuals on ManualsBase.com
Cassette tapes
»
A Fast-forwarding and rewinding
Basic operations
you are playing a tape.
A
F G
»
B Tape program sensor (TPS)
TPS finds the beginning of a track and resumes play from there.
Press [6] or [5] during play.
Tape direction backward forward
B ! 6 5
F G
" 5 6
Note
TPS may not operate correctly in the following situations:
If the interval between tracks is less than 4 seconds.
If there is noise between tracks.
If there are silent parts within tracks.
19
RQT5355
More user manuals on ManualsBase.com
Changing sound field and
»
A
quality
Changes to sound field and quality have no effect on recordings.
[SC-EH760]
SC-EH760 MULTI JOG
Turn [MULTI JOG] to select a setting.
[SC-EH560]
Press [EQ] to select a setting.
Each time you turn [MULTI JOG] (SC-EH760) or press [EQ]
(SC-EH560):
2 13 HEAVY: Adds punch to rock.
SC-EH560 EQ CLEAR: Clarifies higher sounds.
HALL: Expands sound to make you feel like you were in a hall.
AI-EQ: Adjust sound with the acoustic image equalizer
(➡ page 21).
M.EQ: Create your own effects (➡ see below).
FLAT: Canceled (no effect is added).
»
SC-EH760 SC-EH560
FLAT
B Using the manual equalizer
HEAVY
FLAT HALL
HEAVY AI-EQ
CLEAR
HALL
Create your own sound quality effects.
CLEAR M.EQ AI-EQ
M.EQ
1 [SC-EH760]
Turn [MULTI JOG] to select “M.EQ”.
B
[SC-EH560]
1 MULTI JOG Press [EQ] to select “M.EQ”.
EQ
(On the sound processor)
FLAT HALL
2 Press [3D AI EQ/M.EQ BAND] to se-
HEAVY
CLEAR
AI-EQ
M.EQ lect the band.
Each time you press the button:
LOW>MID>HIGH
2 3D AI EQ/
M.EQ BAND
(On the tuner amplifier)
3
^------------------------}
C
FLAT HALL
HEAVY AI-EQ
20
CLEAR
b c d M.EQ
RQT5355
More user manuals on ManualsBase.com
Changing sound field and quality
1 [SC-EH760]
Turn [MULTI JOG] to select “AI-EQ”.
[SC-EH560]
Press [EQ] to select “AI-EQ”.
SC-EH560 2 1 3 2 Press [3D AI EQ/M.EQ BAND] to se-
lect the surround level.
Each time you press the button:
AI EQ>3D AI 1>3D AI 2
^__-----------------__}
To cancel
2 3D AI EQ/
M.EQ BAND
Turn [MULTI JOG] (SC-EH760) or press [EQ] (SC-EH560) to select
“FLAT”.
3 2 MULTI
CONTROL
1
»
MULTI JOG
FLAT
HEAVY
CLEAR
HALL
AI-EQ
M.EQ
B Boosting the super woofer
1 1
2 [SC-EH760]
2
FLAT
HEAVY
CLEAR
HALL
AI-EQ
M.EQ
Press [DIGITAL S.WOOFER].
[SC-EH560]
Press [S.WOOFER].
B SC-EH760 SC-EH560 The indicator lights.
DIGITAL Each time you press the button:
S.WOOFER S.WOOFER MID (medium)>MAX (high)>cancel
^_______---------------__}
There is only one level when listening through headphones.
To cancel
Press [DIGITAL S.WOOFER] (SC-EH760) or [S.WOOFER]
(SC-EH560) to turn the indicator off.
SC-EH760 SC-EH560
DIGITAL
(On the tuner amplifier)
S.WOOFER S.WOOFER
21
RQT5355
More user manuals on ManualsBase.com
Enjoying surround sound
The following chart gives a summary of this unit’s surround features. It also shows additional features that can be used to enhance your enjoyment.
Note
³All the features are only effective if speakers are used. No discernible effect will be heard through headphones.
³You may experience a reduction in sound quality when these surround systems and effects are used with some sources. If this occurs, either turn
the surround system or effect off or reduce the level of the effect.
³Use this input selector to enjoy DVDs encoded with Dolby Digital or DTS
5.1 channel sources (e.g. Dolby Digital can be identified with these marks.
or DTS) played on a DVD player with
[SC-EH760] 5.1 channel output and a built in Dolby
6CH DISCRETE INPUT Digital/DTS decoder (➡ page 38 for
(➡ page 24) connection, page 24 for operation).
See the manual for the equipment you
³Connect a subwoofer (not included) to
have connected for details on the types of
the SUBWOOFER OUT terminal to
software you can use.
enhance the surround effect (➡ page 24
for operation).
³Dolby Pro Logic is a decoding system that was Software encoded with Dolby Surround
developed to get a better sense of presence can be identified with this mark.
from sources encoded with Dolby Surround.
The feeling of position has been improved by
Changing sound field and quality
A Center focus
B Virtual rear surround
C Multi rear surround Virtual speakers
E Center effect
F Surround effect
G Seat position
Preparation:
1 3 Connect a DVD player with a built in Dolby Digital or DTS decoder
(➡ page 38).
1 6CH
DISCRETE INPUT If you have connected a subwoofer
Press and hold [DIGITAL S.WOOFER] until “SUB W ON” is dis-
played.
VOLUME
UP source, adjust the level of the speakers to the same apparent level.
2
EQ
Repeat steps 1 and 2 to adjust the level accordingly.
CH SELECT AV EFFECT
1 ³If your DVD player is able to output a test signal, you can use it
TEST UPRO LOGIC SUPER DIGITAL
instead of playing a source.
SURROUND S.WOOFER
⁄/g ¤
»
¤
Note
MUTING M N
You cannot record or enjoy karaoke (for Australia and N.Z. only)
∂
VOLUME µ
when you are using 6CH DISCRETE INPUT. To record or enjoy
karaoke with DVDs, ensure the DVD player is also connected to the
AUX (DVD) IN terminals and select “AUX (DVD)” with [INPUT
SELECTOR] (➡ page 39).
1
CH SELECT
24
RQT5355
More user manuals on ManualsBase.com
Enjoying surround sound
To cancel
Press [ë PRO LOGIC, OFF/ON] so the indicator goes out.
1 UPRO LOGIC
source, adjust the level of the speakers to the same apparent level.
1 Press [TEST] to output a test signal.
The speaker outputting the test signal is displayed.
OFF/ON Lch: Front left speaker
Cch: Center speaker
Rch: Front right speaker
Sch: Surround speakers
2 Press [VOLUME (j or i)] to set the volume level of the front
speakers normally used for enjoying the source.
3 Press [3] (to increase level) or [4] (to decrease level) for center
DISC
1 2 3
j/-/--
4 5 6
7 8 9 0
3D AI EQ/M.EQ BAND
EQ
3
CH SELECT AV EFFECT
⁄/g ¤
»
¤
MUTING M N
∂ VOLUME µ
1
TEST
2 ∂ VOLUME µ
25
RQT5355
More user manuals on ManualsBase.com
Enjoying surround sound
To cancel
Press [VIRTUAL DOLBY SURROUND] so the indicator goes out.
Virtual speaker level adjustments
SC-EH560 You can adjust the level (1, 2 or 3) of the virtual center and surround
VIRTUAL speakers (only when CENTER EFFECT or SURROUND
DOLBY SURROUND EFFECT is on) (➡ page 28).
1 Press and hold [DISPLAY MODE, –ëV DEMO] to output a
demo signal.
The speaker outputting the demo signal is displayed.
Lch: Front left speaker
Cch: Center speaker (virtual)
DISPLAY MODE SIMULATED Rch: Front right speaker
-UV DEMO STEREO Sch: Surround speakers (virtual)
2 Set the volume level of the front speakers normally used for en-
A VIRTUAL (On the tuner amplifier) joying the source. ([C])
3 Press [3] (to increase level) or [4] (to decrease level) for center
Changing sound field and quality
DOLBY SURROUND
and surround speakers. ([C])
To stop the demo signal, press and hold [DISPLAY MODE, –ëV
DEMO] again.
»
B SUPER SURROUND SC-EH760
B SUPER
SURROUND
(On the tuner amplifier)
To cancel
Press [SUPER SURROUND] to select “STEREO SOUND”. The indi-
cator goes out.
[C] Surround speaker level adjustments
While playing a source
C 1 Press [CH SELECT].
2 Press [3] (to increase level) or [4] (to decrease level).
H SLEEP PROGRAM CANCEL
DISC
1 2 3
»
j/-/--
4 5 6
7 8 9 0
D SIMULATED STEREO
3D AI EQ/M.EQ BAND
EQ
, [SC-EH760]
CH SELECT AV EFFECT Press [SUPER SURROUND] and select
CH SELECT
TEST UPRO LOGIC SUPER DIGITAL
“SIMULATED STEREO”.
SURROUND S.WOOFER
Each time you press the button:
VCR/AUX/ TAPE/ TUNER/
6CH INPUT DECK 1/2 CD BAND
MUSIC>MOVIE>SIMULATED STEREO
^----------STEREO SOUND (off)(---------}
⁄/g ¤
»
¤
MUTING M N
∂
VOLUME µ
[SC-EH560]
VOLUME∂, µ
Press [SIMULATED STEREO].
The indicator turns green.
To cancel
D SC-EH760 SC-EH560 [SC-EH760]
Press [SUPER SURROUND] to select “STEREO SOUND”. The indi-
SUPER SIMULATED
SURROUND STEREO cator goes out.
[SC-EH560]
Press [SIMULATED STEREO] so the indicator goes out.
26
RQT5355
More user manuals on ManualsBase.com
Surround effects [SC-EH760]
These effects are available when the corresponding indicators are
alight.
To cancel
VIRTUAL REAR 3D ENHANCED Press [CENTER FOCUS] so the indicator turns orange.
SURROUND SURROUND
On the remote control
1 Press [AV EFFECT].
2 Press [2] or [1] so the “CENTER FOCUS” indicator flashes.
3 Press [3] (to turn on or increase level) or [4] (to decrease level
H SLEEP PROGRAM CANCEL
DISC
or turn off).
1 2 3
3
7 8
3D AI EQ/M.EQ BAND
9 0
»
B VIRTUAL REAR SURROUND
2
»
HEAVY AI-EQ
CLEAR M.EQ
C MULTI REAR SURROUND
Press [MULTI REAR SURROUND].
B (On the tuner amplifier)
The indicator turns green.
VIRTUAL REAR
SURROUND
To cancel
(On the sound processor)
Press [MULTI REAR SURROUND] so the indicator turns orange.
FLAT
HEAVY
HALL
AI-EQ On the remote control
1 Press [AV EFFECT].
CLEAR M.EQ
27
RQT5355
More user manuals on ManualsBase.com
Surround effects [SC-EH560]
1 1 22 »
A CENTER EFFECT
1 Press [CENTER EFFECT].
The indicator flashes green.
1 2 3
j/-/--
4 5 6
To cancel
7 8 9 0 1 Press [CENTER EFFECT] so the indicator flashes green.
3D AI EQ/M.EQ BAND
2 Press [CENTER EFFECT] again while the indicator is flashing so
3
EQ 2 it turns orange.
1 »
B SURROUND EFFECT
1 Press [SURROUND EFFECT].
2
MULTI
CONTROL
The indicator flashes green.
1 To cancel
1 Press [SURROUND EFFECT] so the indicator flashes green.
2 Press [SURROUND EFFECT] again while the indicator is
2
MULTI
CONTROL
flashing so it turns orange.
28
RQT5355
More user manuals on ManualsBase.com
Surround effects
SEAT POSITION
To cancel
1 Press [SEAT POSITION] so the indicator flashes.
2 Press [SEAT POSITION] again while the indicator is flashing so it
SC-EH560 1 2 turns orange.
DISC
1 2 3
j/-/--
4 5 6 [SC-EH760]
7 8 9 0
With virtual rear surround
3D AI EQ/M.EQ BAND or 3D enhanced surround [SC-EH560]
EQ
3 horizontal steps 5 horizontal steps
234
CH SELECT AV EFFECT
1
TEST UPRO LOGIC SUPER DIGITAL
SURROUND S.WOOFER
⁄/g ¤
»
¤
MUTING M N
∂ VOLUME µ
1 SEAT
POSITION
(On the tuner amplifier)
FLAT HALL
HEAVY AI-EQ
CLEAR M.EQ
SC-EH560
FLAT
HEAVY
CLEAR
HALL
AI-EQ
M.EQ
29
RQT5355
More user manuals on ManualsBase.com
Before recording
(Deck 2 only)
Note
COUNTER [SC-EH760]
A RESET DISPLAY You cannot record when [6CH DISCRETE INPUT] is selected.
(“ERROR” appears.)
Normal position/TYPE I ✔
High position/ TYPE II ✔
DECK 1/2
Metal position/ TYPE IV ✔
COUNTER
DISPLAY »
A To display the tape counter while recording
»
B Erasure prevention
Recording operations
Discrimination hole
»
C Erasing recordings
1
C 1 2
Press [INPUT SELECTOR] to select “TAPE”.
Insert the recorded tape into deck 2.
3 Press [DOLBY NR] so the “ëNR” indicator goes out.
4 Select the reverse mode.
5 Press [´ REC PAUSE].
6 Press ["] or [!].
6 4
30
RQT5355
More user manuals on ManualsBase.com
Before recording (Deck 2 only)
Preparatory steps
1 EOPEN
Forward side
Tape facing down
Recording operations
DOLBY NR
2 2 Î
NR
3 REV MODE
2 Î NR
31
RQT5355
More user manuals on ManualsBase.com
Recording CDs
Preparation:
³Do the preparatory steps (➡ page 31).
1 2 ³Insert the CD(s) you want to record (➡ page 12).
³[SC-EH760]
Press [DISC 1]–[DISC 5] on the CD changer to select the disc
where you want to start recording, then press [º] to stop the disc.
»
A Normal recording
1 Press ["] (reverse side) or [!] (forward side)
then [º] to set the tape direction.
@
SC-EH760 EDIT 3 2 Press [´ REC PAUSE].
The deck goes into the recording standby mode and the indi-
cator “"” or “!” starts flashing.
4 seconds after the CD(s) finishes, the deck goes into the recording
DISC1–5 @ standby mode.
SC-EH560 EDIT 3
To stop recording
EITHER
Press [º] on the CD changer or CD player.
The deck goes into the recording standby mode 4 seconds later.
Recording operations
OR
Press [º] on the deck.
@ Recording stops immediately but the CD continues to play.
After pressing ["] or [!] then [º] on the cassette deck to set the tape
direction,
Press [EDIT].
Recording starts. In the meantime, “CD EDIT” will scroll across the
2 REC Î
NR
display from right to left.
To stop editing
Press [º] on the CD changer or CD player. The cassette deck also
stops.
B “EDIT OUT” is displayed.
SC-EH760 SC-EH560
To edit programmed tracks
EDIT EDIT Program the tracks (➡ page 14) and press [EDIT].
EDIT
2 REC Î NR
32
RQT5355
More user manuals on ManualsBase.com
»
A Recording the radio
@ To stop recording
Press [º].
2 HREC
PAUSE To temporarily stop recording
Press [´ REC PAUSE].
2 REC Î
NR
The deck goes into recording standby mode.
To resume recording press ["] or [!] with the flashing indicator.
3
»
B Tape-to-tape recording
Recording operations
Repeat steps 1 and 2 for deck 1.
To stop recording
Press [º].
Both decks will stop.
1 1 DECK 1/2 To enjoy another source while recording
Start playing the other sound source.
You can change the volume level and tone quality without affecting
2 the recording.
Note
The recording level and the noise reduction effect of the original
(playback) tape will be recorded on the new tape.
2 TAPE EDIT
12 REC
33
RQT5355
More user manuals on ManualsBase.com
Using the timers
Preparation: Turn the unit on, set the time (➡ page 11), preset
radio stations if you want the timer to start playing
the radio (➡ page 17).
6
Timer operations
The timer starts at the set time with the volume increasing gradually
3 FPLAY
to the set level.
5 FPLAY
When you insert cassettes in decks 1 and 2, deck 1 has priority.
FPLAY
6 H/I
FPLAY
34
RQT5355
More user manuals on ManualsBase.com
Using the timers
Preparation: Turn the unit on, set the time (➡ page 11), preset
radio stations (➡ page 17).
1 1
CLOCK/TIMER
@ DEMO
3 Select the finish time.
4 Select the preset channel.
The record timer is now on standby. The display shows each
condition again then restores the original display.
2 SET
5 Prepare for recording.
1
FREC
Insert a tape into deck 2.
2 Select the Dolby NR mode.
3 Select the reverse mode.
4 Select the tape direction.
2–4 1 ? TUNING @ 6 Press [ê/I] to turn the unit off.
“FPLAY/FREC” indicator remains illuminated to show the
Timer operations
record (or play) timer is on even when ECO mode is selected
(➡ page 11).
Recording starts 30 seconds before the set time with the volume mut-
ed during the set time.
SET
2
CH
4 FREC
MHz
FREC
6 H/I
FREC
35
RQT5355
More user manuals on ManualsBase.com
Using the timers
»
A The play and record timers
Checking the timers
Press [CLOCK/TIMER, –DEMO] to select “FPLAY” (or “FREC”).
A The timer conditions are shown in the following order:
œPLAY/œREC Play timer:
Start time>Finish time>Source>Volume
Record timer:
Start time>Finish time>Broadcast station you select
j/-/--
4 5 6 setting. If you make a new ON time setting, you must make a new
7 8 9 0
OFF time setting.
3D AI EQ/M.EQ BAND
»
EQ
VCR/AUX/
6CH INPUT
TAPE/
DECK 1/2 CD
TUNER/
BAND While playing a source
Press [SLEEP] to select the time
Timer operations
⁄/g ¤
»
¤
MUTING M N
(minutes).
∂
VOLUME µ
Each time you press the button:
SLEEP 30_--)SLEEP 60_--)SLEEP 90
^-=SLEEP OFF(=SLEEP 120(_}
36
RQT5355
More user manuals on ManualsBase.com
Changing the sound range
»
A
display
The sound processor shows the level of each sound range with the
three types of display described below.
SC-EH760 SC-EH560
A DISPLAY MODE DISPLAY MODE
[SC-EH760]
–UV DEMO Press [DISPLAY MODE].
[SC-EH560]
Press [DISPLAY MODE, –ëV DEMO].
The spectrum display will change as follows.
b FLAT
HEAVY
CLEAR
HALL
AI-EQ
M.EQ
»
B Muting the volume
c FLAT HALL
Remote control only
HEAVY AI-EQ
Press [MUTING].
CLEAR M.EQ
⁄/g ¤
»
¤
To cancel
MUTING M N
Press [MUTING] again.
MUTING ∂
VOLUME µ
“MUTING” goes out and the volume is restored.
To cancel from the tuner amplifier, turn [VOLUME] to minimum
(– – dB), then raise it to the required level.
Muting is also canceled when the unit is turned off.
Convenient functions
MUTING
(not included)
VOLUME
37
RQT5355
More user manuals on ManualsBase.com
External unit connections
A DVD player with 5.1ch output
SC-EH760
³Turn off all units before making connections.
³Refer to the manual of the other unit for details.
(Cables and equipment not included.)
FRONT L/R
Stereo phono cable (not included)
White (L)
SURROUND L/R
Sound Red (R)
processor Video connection cable (not included)
CENTER AUX DVD 6ch INPUT
(DVD) CENTER SURROUND FRONT
SUBWOOFER L L
L
L/R OUT (MIX) SUBWOOFER R R
R Connections to SC-EH760
[A] DVD player with 5.1ch output
This unit has the input terminals for 5.1ch surround systems but
B DVD player/Laser disc player
SC-EH760
it does not have the decoders necessary to play them back. The
(without 5.1ch output), etc. DVD player should have these decoders and 5.1ch output.
OUT IN
You can enjoy the sound from your DVD player/Laser disc
L
player etc.
R
[C] Video cassette recorder
You can enjoy the sound from your video cassette recorder.
D
SC-EH760 for
Video cassette recorder Australia and
N.Z.
Sound
processor
VIDEO IN VIDEO OUT
VIDEO
VCR VCR
OUT IN
Television set
MONITOR
OUT DVD
IN
VIDEO
IN VIDEO
OUT
»
A Listening to an external source
B
1 »
B Recording an external source
1 Press [INPUT SELECTOR] to select
the external source.
2 Select Dolby NR and reverse mode.
(➡ page 31)
To stop recording
Press [º] on the deck.
Convenient functions
The deck goes into the recording standby mode.
To resume recording press ["] or [!] with the flashing indicator.
@
Recording onto an external unit
1 INPUT SELECTOR Select the source to be recorded with [INPUT SELECTOR].
Start recording on the external unit and start playing the source to be
recorded.
3 HREC
PAUSE
4
39
RQT5355
More user manuals on ManualsBase.com
Enjoy karaoke with CDs and
cassettes
(For Australia and N.Z. only)
Software Karaoke
ECHO
4 Voice Sound
Stereo
Non-
karaoke
modes multiplex
1 MIC VOL
MONO L
±
(Background —— ——
MIN MAX music)
´
MONO R —— ——
(Voice)
VOICE MUTE —— —— ±
´ ´
1 MIC 2 (off) (Background ± (For singing
musiciVoice) along)
MONO·L
To cancel
Press [KARAOKE] to clear the display.
Note
The karaoke modes cannot be used with the radio, 3D AI EQ, 6CH
V.MUTE
DISCRETE INPUT or surround effects.
4 UP
VOLUME
MIC VOL
Voice mute may not function sufficiently or noise may interfere when
using the following software.
³Monaural software
³Software with few musical instruments, including classic music and
MIN MAX poetry recitations
DOWN ³Software with duets or strong choruses
A ECHO
»
A Using the echo effect
40
RQT5355
More user manuals on ManualsBase.com
Technical specifications
SOUND PROCESSOR Load impedance Tape speed 4.8 cm/s
º EQ/SFP section FRONT (High/Mid) total impedance 6 Wow and flutter 0.16 % (WRMS)
MANUAL GEQ FRONT (Low) 8 Fast forward and rewind times
3-Band parametric EQ SURROUND 8 Approx. 110 seconds with
Center frequency CENTER 8 C-60 cassette tape
S. WOOFER Frequency response (Dolby NR off)
High band
Center frequency 70 Hz TYPE I (NORMAL) 20 Hz–16 kHz (DIN)
3.5 kHz, 5.3 kHz, 8 kHz, 12.5 kHz
Mid band 240 Hz, 390 Hz, 630 Hz, 1 kHz, LEVEL (VOL s20 dB) MID i8 dB TYPE II (HIGH) 20 Hz–16 kHz (DIN)
1.5 kHz, 2.3 kHz, 3.5 kHz MAX i12 dB TYPE IV (METAL) 20 Hz–16 kHz (DIN)
Low band 70 Hz, 90 Hz, 143 Hz, 240 Hz º Amplifier section [SC-EH560] S/N (Signal levelumax recording level, TYPE II
Power output (L/R both channel driven) type tape)
Level control n1.2, 2.4, 3.6, 4.8, 6 dB
DIN 10 kHz THD 1 %/6 (High) 2k12 W NR off 56 dB (A weighted)
EQ SPACE mode
1 kHz THD 1 %/6 (Mid) 2k12 W Dolby B NR on 66 dB (A weighted)
3 modes HEAVY, CLEAR, HALL
100 Hz THD 1 %/6 (Low) 2k36 W Input sensitivity and impedance
3D acoustic image EQ
RMS 10 kHz THD 10 %/6 (High) 2k18 W REC (IN) 150 mV/23 k
3 modes AI EQ, 3D AI 1, 3D AI 2
1 kHz THD 10 %/6 (Mid) 2k18 W Output voltage and impedance
º Pre-amplifier section [SC-EH760] PLAY (OUT) 280 mV/360
Input sensitivity/impedance 100 Hz THD 10 %/6 (Low) 2k54 W
VCR (EXT) 250 mV/15 k PMPO 1 kHz/Low 6 , Mid 6 , High 6 º General
1,400 W Dimensions (WtHtD) 294k118.5k281 mm
AUX (DVD) 250 mV/15 k
Total harmonic distortion Mass 2.1 kg
Output level
VCR REC OUT 150 mV/1.5 k Rated power at 1 kHz 1 % (6 ) FRONT SPEAKER [SC-EH760]
(For Australia and N.Z. only) Half power at 1 kHz 0.1 % (6 ) Type 3 way, 3 speakers
VIDEO OUTPUT Load impedance Main (High) 6 Speaker(s)
MONITOR OUT 1 Vp-p, 75 Main (Mid) 6 Super woofer 17 cm cone type
VCR REC OUT 1 Vp-p, 75 Main (Low) 6 Woofer 12 cm cone type
S. WOOFER
º Pre-amplifier section [SC-EH560] Center frequency 70 Hz
Tweeter 6 cm ring shaped dome type
Input sensitivity/impedance Impedance High 6
LEVEL (VOL s20 dB) MID i8 dB Mid 6
VCR (EXT) 250 mV/15 k
MAX i12 dB Low 8
Output level
VCR REC OUT 150 mV/1.5 k º FM tuner section Input power (Music) High 60 W
Frequency range 87.50–108.00 MHz Mid 60 W
º DOLBY PRO LOGIC section [SC-EH760] (0.05 MHz steps)
PRO LOGIC mode SURROUND Low 120 W
Sensitivity 1.8 ¬V (IHF usable) Output sound pressure level 87 dB/W (1.0 m)
CENTER mode NORMAL
S/N 26 dB 1.5 ¬V Crossover frequency 120 Hz, 4 kHz
DELAY TIME 20 ms (Fixed)
S/N Frequency range 42 Hz–50 kHz (j16 dB)
º VIRTUAL DOLBY SURROUND section MONO 70 dB (75 dB, IHF) 46 Hz–36 kHz (j10 dB)
[SC-EH560] Antenna terminal(s) 75 (unbalanced) º General
Mode VIRTUAL DOLBY SURROUND º AM tuner section Dimensions (WtHtD) 254k422k260 mm
º AV SURROUND section Frequency range 522–1629 kHz (9 kHz steps) Mass 6.4 kg
AV surround mode SIMULATED STEREO 520–1630 kHz (10 kHz steps)
[SC-EH760] SUPER SURROUND Sensitivity (S/N 20 dB) 500 ¬V/m
FRONT SPEAKER [SC-EH560]
(MUSIC, MOVIE) Type 3 way, 3 speakers
º Timer section Speaker(s)
º DSP CONTROL section Clock Quartz-lock type
DSP control mode SEAT POSITION Super woofer 14 cm cone type
Function Play timer (1 time, daily), Woofer 12 cm cone type
[SC-EH760] CENTER FOCUS (1, 2), Rec timer (1 time, daily),
[SC-EH760] VIRTUAL REAR SURROUND, Tweeter 6 cm cone type
Sleep (120 min, 30 min intervals) Impedance High 6
[SC-EH760] MULTI REAR SURROUND, Setting intervals (Play/Rec)
[SC-EH760] 3D ENHANCED SURROUND Mid 6
1 minute–23 hours 59 minutes Low 6
[SC-EH560] CENTER EFFECT (1, 2, 3), (1 min intervals)
[SC-EH560] SURROUND EFFECT (1, 2, 3) Input power (Music) High 40 W
º General Mid 40 W
º Spectrum analyzer section Power supply Low 70 W
Display mode NORMAL, PEAKHOLD, AURORA (For United Kingdom, Australia and N.Z.) Output sound pressure level 84 dB/W (1.0 m)
º General AC 230–240 V 50 Hz Crossover frequency 150 Hz, 4 kHz
Dimensions (WtHtD) (For others) AC 230 V 50 Hz Frequency range 46 Hz–22 kHz (j16 dB)
[SC-EH760] 293k89k270 mm Power consumption [SC-EH760] 205 W 50 Hz–20 kHz (j10 dB)
[SC-EH560] 293k89k269 mm [SC-EH560] 110 W
Mass [SC-EH760] 1.5 kg
º General
Standby Dimensions (WtHtD) 254k422k260 mm
[SC-EH560] 1.4 kg Normal mode 11 W Mass 6.0 kg
TUNER AMPLIFIER ECO mode 0.5 W
Dimensions (WtHtD) 293k118.5k346 mm CENTER SPEAKER [SC-EH760]
º Amplifier section [SC-EH760] Type 2 way, 2 speakers
Power output (L/R both channel driven) Mass [SC-EH760] 5.3 kg
[SC-EH560] 4.3 kg Speaker
Stereo Mode Woofer 10 cm cone type
DIN 10 kHz THD 1 %/6 (High) 2k20 W CD PLAYER Tweeter 6 cm cone type
1 kHz THD 1 %/6 (Mid) 2k20 W º Audio Impedance 8
100 Hz THD 1 %/8 (Low) 2k50 W DA converter 1 bit DAC MASH Input power (Music) 120 W
RMS 10 kHz THD 10 %/6 (High) 2k30 W º Pickup Output sound pressure level 85 dB/W (1.0 m)
1 kHz THD 10 %/6 (Mid) 2k30 W Wavelength 780 nm Crossover frequency 4 kHz Reference
100 Hz THD 10 %/8 (Low) 2k70 W º General Frequency range 75 Hz–22 kHz (j16 dB)
PRO LOGIC mode
DIN FRONT 1 kHz THD 1 %/TTL Imp. 6
Dimensions (WtHtD) º General
[SC-EH760] 293k89k288 mm Dimensions (WtHtD) 250k121k147 mm
(High/Mid) 2k20 W [SC-EH560] 293k89k268 mm Mass 1.6 kg
100 Hz THD 1 %/8 (Low) Mass [SC-EH760] 2.2 kg
2k50 W [SC-EH560] 1.6 kg
SURROUND SPEAKER [SC-EH760]
SURROUND 1 kHz THD 1 %/8 2k20 W Type 1 way, 1 speaker
CENTER 1 kHz THD 1 %/8 50 W CASSETTE DECK Speaker
RMS FRONT 1 kHz THD 10 %/TTL Deck system Stereo cassette deck Full range 8 cm cone type
Imp. 6 (High/Mid) Track system 4 track, 2 channel Impedance 8
2k30 W Recording system AC bias Input power (Music) 60 W
100 Hz THD 10 %/8 (Low) Bias frequency 100 kHz Output sound pressure level 84 dB/W (1.0 m)
2k70 W Erasing system AC erase Frequency range 120 Hz–20 kHz (j16 dB)
SURROUND 1 kHz THD 10 %/8 2k30 W Heads º General
CENTER 1 kHz THD 10 %/8 70 W Deck 1 Dimensions (WtHtD) 170k106k118 mm
PMPO 1 kHz/High or Mid 6 , Low 8 (Playback head) Permalloy head Mass 0.9 kg
CENT. 8 , SURR. 8 3,000 W Deck 2
Note
Total harmonic distortion (Recording/Playback head) Permalloy head
(Erasing head) Double gap ferrite head 1. Specifications are subject to change without
Rated power at 1 kHz 1 % (6 )
Motors notice.
Half power at 1 kHz 0.1 % (6 )
Deck 1, 2 Mass and dimensions are approximate.
Capstan drive DC servo motor 2. Total harmonic distortion is measured by the
digital spectrum analyzer.
41
RQT5355
More user manuals on ManualsBase.com
Troubleshooting guide
Before requesting service, make the below checks. If you can’t fix the system as described below, or if something not listed here occurs, refer to the
enclosed directory to locate an Authorized Service Center convenient to you or contact your dealer.
Reference pages are shown as black circled numbers 6.
Common Problems
The picture on the TV disappears The location and orientation of the antenna are incorrect. If you are using an indoor antenna, change
or stripes appear on the screen. to an outdoor antenna.
The TV antenna wire is too close to the system. Separate the antenna wire of the TV set from the
system.
42
RQT5355
More user manuals on ManualsBase.com
The CD changer or CD player
The display is wrong or play won’t The disc may be upside down. <
start. Wipe the disc.
Replace the disc if it is scratched, warped, or nonstandard.
Condensation may have formed in the changer or player due to a sudden change in temperature.
Wait about an hour for it to clear and try again.
[SC-EH760] There is a problem with the CD mechanism. (A power failure may have occurred.)
“TAKE OUT/DISC” appears on the The tray will open automatically. Remove the CD from the tray, and after ensuring there is no CD in
display. the tray close it. The unit will make the disc changing noises for a few moments and then it should
operate normally.
The remote control doesn’t work. Check the batteries are inserted correctly. :
Replace the batteries if they are worn.
All components are required to service the system. If service is ever necessary, bring the entire system.
Maintenance
To clean this unit, wipe with a soft, dry cloth. Clean the heads regularly to assure good quality playback and
If the surfaces are extremely dirty, use a soft cloth dipped in a soap- recording. Use a cleaning tape (not included).
and-water solution or a weak detergent solution.
Reference
43
RQT5355
More user manuals on ManualsBase.com
Matsushita Electric Industrial Co., Ltd. %
Osaka 542-8588, Japan
RQT5355-B
F0100MF1020