Professional Documents
Culture Documents
Alarm Source MVB Info Golf 2008 On
Alarm Source MVB Info Golf 2008 On
Alarm Source MVB Info Golf 2008 On
List of measured values for alarm sources from onboard supply control unit
in Golf from 2009
Under "Read measured values" in the onboard supply control unit J519, the last, one before last
and two before last alarm sources that triggered the alarm can be interrogated. With these
measured values, false alarms and possibly also faults in the anti-theft alarm system can
thereby be localised!
Included with the alarm triggering reasons in the measured values are also date, time and
mileage.
4 Tailgate
5 Bonnet
With all measured values for bonnet or door switches, water
damage or an unfavourable mechanical setting could be the cause!
21 Tilt sensor
The measured value can also be stored if the vehicle was
transported on a ferry, for example!
During vehicle transport on a ferry or car train, the tilt angle sensor
should therefore be deactivated!
41 Power on reset
Control units that are relevant for the anti-theft alarm system were
disconnected or the Gateway was disconnected.
With this measured value, it is also possible that a control unit will
miss a command or fail.
Caution: If the battery is or was discharged, this measured value
might also be stored!
Please check whether the measured values are recorded in a document accordingly depending
on the diagnosis software status.