sra-s.1/sea-sam
AWS Clasiteaton ‘Weight Percent
‘Combined Limit for
UE sa Niner @ Sa Pa we ® Oo Mihov
EOI) EAGI0 WoRDIO
Bool! BAN wosoit
Buz BAII2 — WORILD
BOs E413 Woops! 020 120 100 NS. NS. O31 020 0.30 008 Ns.
6019 A319 WoRDID
6020 E4320 WoK20
a7 B27 Wos27
THOS BASIE WOKE 0039.60 040 02S MIS BAN a2 030008 Ns.
ERIS BAIS WOIIS OAS 125-090 foas OMFS OM OAD O30 HOR 150
L Es916 — WoTdIG 078 Noss 3s 03) 2 ons
918 WOTUIS
ENON EAO14 — WOIMIE. OAS 125 09 OAS ONS 0.3020 0.20 OO 150
E702} Bia WON lS 125 OM ORS DOSS 030020030 BOE 150
E727 E1927 WOW2 IS 160 O75 GOIS OO3S 030 020 030 0.08 1s
Erg ray WUE] gis 1.60 am) amas MONS 0.40 aan 030 aN 15
eros aban woroanf O15 1.60 a a \
040
ENISM BADIM WOTOIS 012 to ORT 0030 02 025 Os 03805 Ns
La
SAWASTO Uni Nunn System or Met and Alloy
"Single lesa haem NS. te Not Spetid
“ale or bon i request be presen eves reer ha 0.0010%
11.2 The weld shall be radiographeu in accordance with ASTM £1032. The quality level of inspection shall be 2-27.
23 The soundness of the weld metal meets the requirements ofthis specifieation ifthe radiograph shows
1) No cracks, no incomplete fusion or incomplete joint penetration
2} No slag inelusions longer than 1/4 in [6.0 mm] or 1/3 of the thickness of the weld, whichever is greater, oF no
sroups of slag inclusions in line that have an aggregate length greater than the thickness of the weld in & length 12 times
the thickness ofthe weld, except when the distance between the successive inclusions exceeds 6 times the length ofthe
longest inclusions inthe group
(3) No rounded indications in excess of those permitted by the radiographic standards in Figure 7 according tothe
rade specified in Table 8
In evaluating the radiograph, 1 in [25 mm of the weld messured from each end ofthe assembly shal be disregarded
11.4 A rounded indication is an indication (on the radiograph) whose length is no more than three times its width
Rounded indications may he circular, elliptical, conical, o iregular in shape, and they may have tals, The size of a
rounded indication isthe largest dimension ofthe indication, including any tal that may be present, The indication may
be porosity or slag, Indications whose largest dimension does not exeved 1/68 in [0b mam] shall he disregarded. Test
assemblies with porosity indications larger than the largest rounded indications permite inthe radiographic standards
donot meet the requirements ofthis speitieation
“9ASME RPVEI
2019 SAS.1/SEA-S5.10
Table?
0 som @ ze 7 7 =
ey ue 3 = : = 2
mae Bulk $ S 3 = =
SB 2 = a 3 a
in = ba e 3 4 = e
et - & & de
Ei Bolin near see Se alow
"Regimen ein he n-edd condton with aging pio 12.2.
«Singles ae mim
‘Raseverse ean tt space in 12a aaa hon et speci Clase 1 ate ei
«Welt tm clsroden tied ae E702 [E24] sal fe longs of 25 a,
"emilesteng of is weld mil ra noel 7 et [30 MPa.
or 90. [2-4 mele fe mkinum ye sgh bl be 7 1330 Pa
Part B
Tests, Procedures, and Requirements
7. Summary of Tests
‘The tests required for each classification are specified in Table 4. "The purpose of these ess is to determine the chemical
compositing, mechanical properties, and soundness of the wed metal, moisture content of the low-hydrogen eletrade
‘covering, and the usability of the electrode, The base metal for the weld est assembles, the welding and testing proce
dures to be employed, and the results required ane given in Clauses 9 shrough 18, The supplemental tests for ubsorhed
‘mojstute, in Clause 17, and diffusible hydrogen, in Clause 18, are nat required for classification of the low-hydrogen
sfectrodes, except lor E7DI8M [EADISM], where these ar required (sve notes i and m of Table 4),
8. Retest
U the results of any test fil to meet the requirement. that test shall he epeated twice. The results of both retests shall
meet the requirement. Specimens for retest may be taken from the original test assembly or from a new test assembly
For chemical analysis, retest eed be only for those specific elements that failed to meet the test requirement. If the
results of one or both reves fail 10 meet the requirement the material under test shall be considered as not meeting the
‘equitements ofthis specification for that classification,
37