Professional Documents
Culture Documents
Virl 1655 Sandbox July v1
Virl 1655 Sandbox July v1
Virl 1655 Sandbox July v1
Requirements
Components
Features
Topology
Get Started
Requirements
Table 1. Requirements
Required Optional
© 2018 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 1 of 16
Cisco dCloud
IMPORTANT: This demonstration is a sandbox that runs within a virtual machine (VM) that contains five virtual CPUs and 25GB of
memory; therefore, the number of devices you can include in a single topology is limited. The number of topologies that can run
concurrently is also limited. The actual number of devices and topologies varies depending on the devices used in the simulations.
For more information about VM Maestro and VIRL, refer to the VIRL Learning Lab Tutorial.
Components
The VIRL release used in this demonstration contains the following versions:
OpenStack Mitaka
VIRL_CORE 0.10.37.24
AutoNetkit 0.24.1/0.23.12
VM Maestro 1.6.0-528
The following platform reference model VMs are available for internal users:
IOSv - 15.6(3)M
ASAv 9.8.2
CoreOS 1632.2.1(New)
© 2018 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 2 of 16
Cisco dCloud
Features
Cisco VM Maestro Flexible network layout and connections
Ability to run user interface locally and perform computations in the cloud
© 2018 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 3 of 16
Cisco dCloud
Topology
This content includes preconfigured users and components to illustrate the scripted scenarios and features of the solution. Most
dCloud: The Cisco Demo Cloud
components are fully configurable with predefined administrative user accounts. You can see the IP address and user account
credentials to use to access a component by clicking the component icon in the Topology menu of your active session and in the
scenario steps that require their use.
Figure 1. Topology
Linux VM jump host guest guest Typically, these are the credentials; otherwise, use your project username and password.
Linux servers default user cisco cisco These are the credentials if you use the Build Initial Configurations option from the Configuration
menu.
Cisco VM cisco cisco These are the credentials if you use the Build Initial Configurations option from the Configuration
menu. If you do not use the Build Initial Configuration option, refer to Table 3.
ASAv N/A N/A No default password; no default enable password; default configuration exists.
CSR1000v N/A N/A No default password; no default enable password; default configuration exists.
ISOv N/A N/A No default password; no default enable password; no default configuration exists.
ISOvL2 N/A N/A No default password; no default enable password; no default configuration exists.
© 2018 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 4 of 16
Cisco dCloud
Get Started
BEFORE PRESENTING
dCloud: The Cisco Demo Cloud
We strongly recommend that you go through this document and work with an active session before presenting in front of a live
audience. This will allow you to become familiar with the structure of the document and content.
Follow the steps to schedule a session of the content and configure your presentation environment.
2. For best performance, connect to the workstation with Cisco AnyConnect VPN [Show Me How] and the local RDP client on
your laptop [Show Me How]
© 2018 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 5 of 16
Cisco dCloud
IMPORTANT: The Cisco internal VIRL community operates and maintains VIRL. This demonstration introduces VIRL and enables
remote access to the VIRL environment. If you experience any performance or configuration issues while using VIRL, report issues
to virl-support@cisco.com. The VM Maestro user interface (UI) features a Generate Problem Report option in the Help menu;
generate and include this report in your support-request email.
2. Verify that VM Maestro opens to the preconfigured sample topology named 2-node.virl.
© 2018 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 6 of 16
Cisco dCloud
3. In the Projects pane under Sample Topologies, notice the other available topologies.
NOTE: Selecting any topology from this pane opens a new topology tab in the workspace.
dCloud: The Cisco Demo Cloud
© 2018 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 7 of 16
Cisco dCloud
1. To access design mode, click Design, located in the upper right corner of the VM Maestro UI.
NOTE: The Topology Palette pane features tools to modify existing topologies by adding, deleting, or moving devices and
connections.
© 2018 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 8 of 16
Cisco dCloud
3. To view the properties of the overall topology, click anywhere in the gray space in the Topology pane and select the
Properties tab.
4. To view the properties of a specific device in the topology, choose the device and then click the Properties tab.
© 2018 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 9 of 16
Cisco dCloud
© 2018 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 10 of 16
Cisco dCloud
© 2018 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 11 of 16
Cisco dCloud
6. From the drop-down list in the IGP section, notice the variety of available routing protocols.
NOTE: For more information about how to use routing protocols, refer to the VIRL Learning Lab Tutorial.
dCloud: The Cisco Demo Cloud
NOTE: If you make any changes to the configuration, you must complete them in design mode before launching the simulation. If
you attempt to update the router configuration using design mode after launching the simulation, you will receive an error. If this
happens, stop the simulation, update the configuration, and re-launch the simulation.
7. For this demonstration, keep the default (not specified) routing protocol.
NOTE: If you make changes to the configuration, be sure to click the Build Initial Configurations icon.
© 2018 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 12 of 16
Cisco dCloud
2. From the main toolbar, click the Launch Simulation icon to import the session configuration into the VM Maestro application.
NOTE: Only click the Launch Simulation icon once; each click of the Launch Simulation icon initiates new copies of the
dCloud: The Cisco Demo Cloud
simulation.
NOTE: You can also launch a simulation by choosing Simulation > Launch Simulation from the menu options.
NOTE: This dialog box only appears if you made changes to the configuration.
4. Wait for all devices to show as ACTIVE in the Simulation pane before proceeding.
IMPORTANT: The status of all nodes must change from BUILD to ACTIVE before the running simulation. It may take up to 15
minutes for all nodes to finish the build process.
5. In the Simulations pane, right-click any node and choose Telnet > To Its Console Port to launch a PuTTY (terminal)
session to automatically connect to the IOS XRV router.
© 2018 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 13 of 16
Cisco dCloud
7. Enter login at the console prompt and log in with username: cisco, password: cisco.
9. Using the IOS, you can make configuration changes directly to any device within the topology. To save all configuration and
topology changes, choose File > Save As or click the Save icon ( ) located in the main toolbar.
10. To end the simulation, right-click the topology name in the Simulations pane and select Stop Simulation.
© 2018 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 14 of 16
Cisco dCloud
NOTE: Alternatively, click the Stop Simulation icon ( ) located in the main toolbar.
© 2018 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 15 of 16
Cisco dCloud
© 2018 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 16 of 16