Professional Documents
Culture Documents
Tes Mikrotik
Tes Mikrotik
a. 8
b. 16
c. 1
d. 0
2. The highest queue priority is
a. 1
b. 8
c. 16
d. 256
3. How many wireless clients can connect, when wireless card is configured to mode=bridge?
a. 2
b. 100
c. 2007
d. 1
4. Which of the following routes statuses are possible? D. S=static ?
a. A=active
b. C=connected
c. D=drop
d. S=static
5. When viewing the routes in winbox, some routes will show “DAC” in the first column. These
flags mean:
a. Dynamic,active,connected
b. Dynamic, active, console
c. Direct, available, connected
d. Dynamic, available, created
6. Choose the correct PCQ argument values to allow 256kbps maximum download and upload for
each client:
a. Kind=pcq pcq-rate=256000 pcq-classifier=dst-address
b. Kind=pcq pcq-rate=256000 pcq-classifier=src-address
c. Kind=pcq pcq-rate=5000000 pcq-classifier=dst-address
d. Kind=pcq pcq-rate=1256000 pcq-classifier=dst-address
e. Kind=pcq pcq-rate=5000000 pcq-classifier=src-address
7. What is the correct action for a NAT rule on a router that should intercept SMTP traffic and send
it over to a specified mail server?
a. Passthrough
b. Redirect
c. Tarpit
d. Dst-nat
8. In the route list, the identification DAb for route stands for
a. Dynamic-active-bgp
b. Direct-acknowledge-backup
c. Dynamic-active-backup
d. Direct-active-bgp
9. Destination NAT (chain dstnat, action dst-nat) can be used to:
a. Change destination port
b. Hide your local network from the internet
c. Change source port
d. Direct users from the internet to a server within your local network
10. What kind of packet is marked by connection – state = established matcher?
a. Packet is related to, but not part of an existing connection
b. Packet begins a new TCP connection
c. Packet belongs to an existing connection, for example a reply packet or a packet which
belongs to already replied connection
d. Packet does not correspond to any known connection
11. Router has wireless and etherhet client interfaces, all client interfaces are bridged. To create a
DHCP service for all clients, DHCP server must be configured on:
a. Ethernet and wireless interfaces
b. Every bridge port
c. Only on the bridge interface
d. DHCP service is not possible in this setup
12. For static routing functionality, additionally to the RouterOS ‘system’ package, you will also need
following software package:
a. Advanced-tools
b. Routing
c. No extra package required
d. Dhcp
13. To connect a mikrotik router to a wireless access point, you have to:
a. Use the same radio name as on the access point
b. Use the same band (5 GHz, 2.4 GHz, …) as on the access point
c. Use the same SSID as on the access point
14. in which order are the entries in Access list and connect list processed?
a. By signal strength range
b. In sequence order
c. By interface name
d. In a random order
15. Which configuration menu should you use to change route’s Winbox default port?
a. /ip firewall service ports
b. /system resource
c. Ip firewall filter
d. /ip service
16. Which routerOS firewall chain should be used to block a client’s MSN traffic?
a. Input
b. Output
c. Static
d. Forward
17. Which firewall cjain should be used for filters that protect your router interface?
a. Forward
b. Input
c. Post-routing
d. Pre-routing
18. What will happen “default forward” is disable in wireless menu on a RouterOS AP?
a. Client will not be able to communicate with each other
b. Only clients with matching access control list rule will be able to connect to the AP
c. Clients will not be able to connect to the AP
d. AP will not be able to communicate with the clients
19. A client that has successfully connected to a wireless network is considered to be which of the
following? Choose all that apply:
a. Associated
b. Authenticated
c. Unassociated
d. Unauthenticated
20. Which of the protocols below is used by Netinstall?
a. Rarp
b. Bootp
c. Dhcp
d. Arp
21. RouterOS log messages are stored on disk by default
True ---- False