Professional Documents
Culture Documents
OVER SPEED PREVENTION WITH FUEL LOCK 2018 Engine
OVER SPEED PREVENTION WITH FUEL LOCK 2018 Engine
INTRODUCTION;
. Special safety features have been built into cars for years, some for
the safety of car’s occupants only, and some for the safety of others. . This is an
attempt to make a device such that it can minimize the accidents due to over
speeding of vehicles.
SYNOPSIS:
The main abstract of the project is to control the over speeding of vehicle. In
this project , fuel valve is opened or closed depend upon the speed of the wheel
or pulley sensed by a SPEEDOMETER cable and speed is displayed in
speedometer. The magnetic sensor which monitor the speed at speedometer and
sends a signal to the microcontroller when the speed exceeds the set limit. The
wheel speed is increased by pressing a pedal.
When the speed increases a particular limit , the sensor sends a signal to the
controller which in turn switch off the electrical supply to the fuel valve to close
and also sounds alarm.
WORKING PRINCIPLE;
Here PIC 16F870 MICROCONTROLLER is used for monitoring speed and
controlling the fuel valve. The magnetic sensor is placed on the speedometer glass
at set RPM . The magnet is placed on the speedometer needle which activate the
magnetic sensor when the speed reaches the set RPM .Hence the magnetic sensor
sends the signal to the controller which inturn switch off the fuel valve and switch
on the alarm sound. The microcontroller is already programmed with using C or
assembly language to satisfy conditions.
ADVANTAGES;
DISADVANTAGES;
APPLICATIONS;
1) This system can be used in both light moving vehicles such as two wheelers
as well as in heavy moving vehicles such as buses and trucks etc.
2) This system can be implemented in institutional vehicles, taxis, driving
school vehicles, etc.
Block Diagram;
SPEEDOMETER
Power
Supply
ENGINE DRIVE
WHEEL
MAGNETIC MICRO
SENSOR CONTROLLER
Project Elements
The outcomes of this project will be anticipated to show that it will alert
unaware drivers from preventing a traffic accident, recognizing some unusual
situations or gaining more response time whenever the over speeding was
approaching.