Professional Documents
Culture Documents
SULME
SULME
Owner’s Manual
Ver 1.0
12/Sep/2018
1/11
1 System Overview ............................................................................................................... 3
1.1 System features ....................................................................................................... 3
1.2 Operation environment ........................................................................................... 4
2 Start up and shut down of SULME ................................................................................. 5
2.1 Start up .................................................................................................................... 5
2.2 Shut down ................................................................................................................ 5
3 Operating procedure ......................................................................................................... 6
3.1 Files that require conversion .................................................................................. 6
3.2 Set up of output conditions ..................................................................................... 7
3.3 Conversion.............................................................................................................. 10
3.4 Opening the file by use of MentePC ..................................................................... 10
3.5 Help.......................................................................................................................... 11
3.6 Version .....................................................................................................................11
4 Attachment ....................................................................................................................... 11
4.1 How to use in Windows Vista or later ...................................................................11
(1) Start up of SULME .................................................................................................11
2/11
1 System Overview
1.1 System features
The present system converts the saved communication data log of the SL
checker to logged data used in MentePC.
The converted logged data is then be used to draw graphs of outdoor and
indoor units, using saved data reading function of the MentePC.
A set of data that includes one outdoor unit and 16 indoor units can be
converted to MentePC logged data.
By changing the object units, other outdoor units and other indoor units
during the same time frame can be outputted.
System overview
Outdoor unit
SuperLink
Indoor unit
USB
SLChecker
SULME
Superlink MentePC
communication log Graph
Conversion
3/11
1.2 Operation environment
OS Windows 2000
Windows XP
Windows Vista*
Windows 7*
Windows 8*
Windows 8.1*
Windows 10*
Screen display 640 X 480 pixels
4/11
2 Start up and shut down of SULME
2.1 Start up
Menu – Start – Program - SLChecker - SULME When SULME is clicked,
SULME main screen will appear
5/11
3 Operating procedure
3.1 Files that require conversion
When Menu – File - Open is clicked file selection dialog box is shown.
Select the logged data (S01 file) that was saved by SL checker.
Address analysis can be put to break or pause by the button in the message
box.
When “Cancel analysis” click, Cancel Address analysis is cancel.
However there can be cases where it may not be possible to detect all the
indoor and outdoor units in the network.
6/11
3.2 Set up of output conditions
After address analysis is completed, the list of outdoor units that were
detected will be shown on the main screen unit selection column.
The outdoor units that need to have data converted to MentePC logged data
are selected.
The indoor units that correspond to the selected outdoor units are shown in
the list.
The outdoor unit can only be selected one at a time. If one outdoor unit is
selected the other outdoor units can not be selected. If another outdoor
unit must be selected the check mark must be removed and the other
outdoor unit must be selected.
If the selected outdoor unit is an Sub (or slave) outdoor unit the
corresponding indoor units are not shown.
7/11
Indoor unit that needs to have its data converted into MentePC data is
selected.
8/11
Select the unit series that is to be outputted. When the button is clicked,
the unit series is shown.
9/11
3.3 Conversion
When the “Start convert” button of the main screen is clicked, logged data in
MentePC format will start to be generated.
10/11
3.5 Help
This material can be clicked by selecting help in the help menu.
Need Acrobat Reader.
3.6 Version
Version number of SULME can be confirmed.
11/11