Professional Documents
Culture Documents
Sikaquick 2500 Id - Pds en
Sikaquick 2500 Id - Pds en
SikaQuick®-2500 id
VERY RAPID HARDENING REPAIR MORTAR
PRODUCT INFORMATION
Packaging 20 kg bag
Appearance / Colour Powder / Concrete Grey
Shelf life 6 months from date of production if stored properly in undamaged un-
opened, original sealed packaging.
Storage conditions Store in dry conditions at temperatures between +4 °C and +35 °C. Protect
from direct sunlight and frost.
TECHNICAL INFORMATION
Compressive Strength 1 hour ~15 N/mm2 (ASTM C-109)
3 hours ~24 N/mm2 at +27 °C
1 day ~35 N/mm2
7 days ~50 N/mm2
28 days ~60 N/mm2
1/3
Tensile Adhesion Strength 3 hours > 1.5 N/mm2
(Using Sikadur® -732 as bonding agent)
APPLICATION INFORMATION
Mixing Ratio Flowable Consistency 2.8 litre / 20 kg bag (water / powder ratio 14%)
Pourable Consistency 2.4 litre / 20 kg bag (water / powder ratio 12%)
Consumption Yield : ~2 300 kg/L
(~2 018 kg of SikaQuick®-2500 id for 1 m³ of mortar)
Pot Life ~15 min (at +27 °C)
(after adding powder to the water)
Initial Set Time 20 - 30 min (at +27 °C)
Final Set Time 35 - 50 min (at +27 °C)
2/3
LOCAL RESTRICTIONS LEGAL NOTES
Please note that as a result of specific local regula- The information, and, in particular, the recommenda-
tions the declared data and recommended uses for this tions relating to the application and end-use of Sika
product may vary from country to country. Please products, are given in good faith based on Sika's cur-
consult the local Product Data Sheet for the exact rent knowledge and experience of the products when
product data and uses. properly stored, handled and applied under normal
conditions in accordance with Sika's recommenda-
ECOLOGY, HEALTH AND SAFETY tions. In practice, the differences in materials, sub-
strates and actual site conditions are such that no war-
For information and advice on the safe handling, stor- ranty in respect of merchantability or of fitness for a
age and disposal of chemical products, users shall refer particular purpose, nor any liability arising out of any
to the most recent Safety Data Sheet (SDS) containing legal relationship whatsoever, can be inferred either
physical, ecological, toxicological and other safety-re- from this information, or from any written recom-
lated data. mendations, or from any other advice offered. The user
of the product must test the product’s suitability for
the intended application and purpose. Sika re- serves
the right to change the properties of its products. The
proprietary rights of third parties must be observed. All
orders are accepted subject to our current terms of
sale and delivery. Users must always
refer to the most recent issue of the local Product Data
Sheet for the product concerned, copies of which will
be supplied on request.
3/3