Professional Documents
Culture Documents
Lab 2
Lab 2
I.D # 1803538
Objective/Purpose: To learn the different procedures of how to safely and effectively measure
Experiment 1
Procedures:
2. Using the voltage on the digital multi meter, ensure that the variable power was set to
zero.
6. The terminal that the black and red lead were connected to was stated.
Errors:
1. All necessary precautions were taken to avoid any possible human errors.
Experiment 2
Procedures:
Errors:
1. All necessary precautions were taken to avoid any possible human errors.
Experiment 3
3. Using the voltage on the digital multi meter, ensure that the variable power was set to
zero.
7. The terminal that the black and red lead were connected to was stated.
Errors:
1. The power supply was only sending out 1 A, causing the voltage and the resistance to
Conclusion:
Due to the obvious fact that the experiment was able to be carried out, the researcher thinks it’s
safe to say that the objectives were met, which were to learn the different procedures of how to
safely and effectively measure resistance and AC and DC voltage and current using a digital
multi-meter. However, as shown experiment 3 was not quite a success due the fact that the power
supply was only sending out 1 A causing the voltage and resistor to give incorrect readings.
Data Tables:
Experiment 1
(-).
Experiment 2
Readings Function/Mode
236.6 Ohms
325.7 Ohms
77.4 Ohms
Experiment 3
).