Professional Documents
Culture Documents
Nachi Valve Directionalcontrol Spec PDF
Nachi Valve Directionalcontrol Spec PDF
Solenoid
SS Solenoid Valve 26.4 - 42.3gpm, 5000psi
Valves
Fine
Fine Solenoid Valve
Solenoid SF 2.6 - 10.6gpm, 3000psi
(High-Low Valve)
Valves
Features
qVery long life sation and low pressure compensation con- replacement.
The movable iron core of the wet type sole- struction provide large capacity and low yWide-ranging backward compatibility makes
noid is immersed in oil, which keeps it lubri- pressure loss. it simple to replace previous valve models
cated and cushions it from impact and vibra- G01 : 35MPa{357kgf/cm2}100r/min with this one. Combining this valve with a
tion, ensuring very long life. G03 : 35MPa{357kgf/cm2}160r/min modular valve contributes to the compact
wLow switching noise rEasy connections configuration of the overall device.
The wet-type solenoid valve provides very A special wiring box provides a COM port uGlobal support (G01 size)
low core switching noise, for quiet operation. and indicator light as standard for simple Meets overseas safety standards (CE, UL,
eHigh pressure, large capacity, with minimal wiring and maintenance. and CSA). It can be safely used anywhere in
pressure loss tEasy coil replacement the world. Contact your agent for certified
Comprehensive fluid reaction force compen- A plug-in type coil enables one-touch coil products.
Specifications
SS-G01 SS-G03
Standard Type
Model No.
Standard Type Shockless Type DC Solenoid Type Shockless Type
AC Solenoid Type
(With built-in rectifier)
Operation Maximum Maximum Working Maximum Maximum Working Maximum Maximum Working Maximum Maximum Working Maximum Maximum Working
JIS Symbol Flow Rate Pressure Flow Rate Pressure Flow Rate Pressure Flow Rate Pressure Flow Rate Pressure
Symbol r/min MPa{kgf/cm2} r/min MPa{kgf/cm2} r/min MPa{kgf/cm2} r/min MPa{kgf/cm2} r/min MPa{kgf/cm2}
-A2X- (gpm) (psi) (gpm) (psi) (gpm) (psi) (gpm) (psi) (gpm) (psi)
40
-H2X- 30 30 (10.6) 85 85
(7.9) (7.9) 85 (22.4) (22.4)
-E2X-
(22.4)
-A3X-
80
(21.1)
-H3X-
100
-E3X-
(26.4)
-A3Z-
65
-H3Z-
(17.1)
-E3Z-
-A4-
50
(13.2) 35{357} 35{357}
-H4-
(5000) (5000)
35 25{255} 25{255}
-A5-
(5000) 50 (3571) 130 160 130 (35.71)
(13.2) (34.3) (42.2) (34.3)
-H5-
-C2-
100
-C5-
(26.4)
-C9-
-C1S-
-C6S-
-C1- AC Solenoid
65 (17.1)
DC Solenoid
-C6- 80 (21.1)
-C4-
50
-C7Y-
(13.2) 40 70 25{255} 100 25{255} 85
(10.6) (18.5) (3571) (26.4) (3571) (22.4)
-C8-
Note) The maximum flow rate of each valve depends on the pressure. For details, see pages S-9 and S-10.
S-1
05S_Solenoid Valve(P01-12)_E.q 07.6.7 3:58 PM Page 2
SS-G01 SS-G03
DC Solenoid DC Solenoid
AC Solenoid AC Solenoid
Built-in Rectifier Built-in Rectifier
C* E* D* C* E* D*
Maximum
Working P, A, B ports 35(25)MPa{357(255)kgf/cm2}(Note1) (5000psi)
Pressure
Maximum
Allowable T port 21MPa{214kgf/cm2} (3000psi) 16MPa{163kgf/cm2} (2285psi)
Backpressure
Standard Type 300 300 300 240
Switches/min. 120 120
Shockless Type − 120 − 120
Standard Indicator light R R
Shockless − F − F
− −
Option
Surgeless G G G G
With manual push-button N N
Quick Return − Q − − Q −
Weight Double Solenoid 1.8 2.0 4.2 5.5
(kg) Single Solenoid 1.4 1.5 3.5 4.1
Dust Resistance/Water Resistance Rank JIS C 0920 IP64 (Dust-tight, Splash-proof)
Environment
(M8 × 70 (Four))
10–24 × 1 3/4
1/4–20 × 2 3/4
M6 10 to 13N.m{102 to 133kgf.cm}
M5 5 to 7N.m{51 to 71kgf.cm}
Tightening Torque (M8 20 to 25N.m{204 to 255kgf.cm})
10–24 3.6–5.1Lbs.ft.
1/4–20 7.2–9.4Lbf.ft.
Note) 1. Maximum operating pressure depends on the valve type. For details, see page S-1.
2. For mounting bolts, use 12T or equivalent.
Notes
zPipe system so that tank line is nDo not supply electric power to the uous in order that the changeover
always filled with oil. AC solenoid unless the coil is position may be firmly maintained.
xSurge pressure should be kept mounted to the valve. ⁄0Resistance force against the manu-
below maximum tank line back mProvide drain piping from the T al override pin changes, depending
pressure rating. port, when valve spool types are on the back pressure of the tank
cWhen using a 4-way valve as a 2- A2X, H2X, E2X. line.
way or 3-way and blocking unused ,If the changeover position is kept ⁄1Solenoid coil could be hot by con-
ports lowers the maximum flow. under high pressure for an extend- tinuous operation. Do not touch the
vKeep hydraulic oil clean. (Degree of ed period, malfunctions may occur coil directly by hand.
contamination: NAS grade 12 or due to hydraulic lock. Please con- ⁄2Gasket dimension
better). When petroleum hydaulic sult us when you have such appli- SA/SS-G01 = ISO 4401-03-02-0-94
oil is used, it should conform to ISO cation. SA/SS-G03 = ISO 4401-05-04-0-94
VG32, 46. .When the detent-type (E2X, E3X,
bDo not exceed permissible voltage E3Z) is used, we recommend that
range of the coil used. the electric power supply be contin-
S-2
05S_Solenoid Valve(P01-12)_E.q 07.6.7 3:58 PM Page 3
Solenoid
Voltage Frequency For SS-G01 For SS-G03
Type
Supply
(V) (Hz) Solenoid Coil Drive Current Holding Current Holding Power Allowable
Voltage Range
Solenoid Coil Drive Current Holding Current Holding Power Allowable
Voltage Range
Type Type (A) (A) (W) (V) Type (A) (A) (W) (V)
E2 AC200 50/60 EDC64-E2-1A 0.15 26 180 to 220 ECB64-E2 0.22 37.0 180 to 220
D1 DC12 ⎯ EDC64-D1-1A 2.2 26 10.8 to 13.2 ECB64-D1 2.6 31.0 10.8 to 13.2
DC
D2 DC24 ⎯ EDC64-D2-1A 1.1 26 21.6 to 26.4 ECB64-D2 1.5 36.0 21.6 to 26.4
S-3
05S_Solenoid Valve(P01-12)_E.q 07.6.7 3:58 PM Page 4
Surge suppressor
Relay contact
φ 63x φ 35x300 W=150kg
DC power
supply
R=1Ω
Voltage
Current
A B
SS-G03-C5-FR-D2-J21
Storage oscilloscope
P T
Spark time
¡Handling
zThis type is used in the case of power sup-
Push-button ply type E* (with built-in rectifier) to shorten
Can be locked by pressing the spring return time. This also applies to
the button and rotating 90°.
D*.
xThe quick return mechanism is built in.
φD
Stroke S
L SW
Power supply
Surge absorber
Recovery Time
Rectifier Circuit
Limiter Circuit
Solenoid
Full Wave
Model L S D
133.5
AC solenoid
(5.26) 7.5 30
SS-G01
140.5 (0.30) (1.18)
DC solenoid
(5.53)
155.5
AC solenoid
(6.12) 9.5 35
SS-G03
173.5 (0.37) (1.38)
DC solenoid
(6.83)
S-4
05S_Solenoid Valve(P01-12)_E.q 07.6.7 3:58 PM Page 5
26(1.02)
32(1.26)
B
A
Note)
SS-G01-H**-R**-E31 P
The solenoid is on the opposite side of that shown for SOLa in φ 2.8(Dia 0.11)
12
the illustrations shown here. φ 7.5 (0.47)
2 to G (Previously PF) 1/2 (Did 0.30) Indicator light
SOL a
87(3.43)
71.5(2.81)
48(1.89)
37.5(1.48)
SOL b
25.5(1.00)
5.5(Dia 0.22)
46 66(2.60)
(1.81) 102(4.02) 48.5(1.91)
Manual push-button 150.5(5.93)
SS-G01-C **-R-C*-E31
SS-G01-E **-R-C*-E31
SOL b SOL a
102(4.02) 102(4.02)
49.8(1.96) 204(8.03)
Space required for coil removal
DC Solenoid and Rectifier
SS-G01-A **-R-D/E*-E31
SS-G01-H **-R-D/E*-E31
SS-G01-C **-R-D/E*-E31
SS-G01-E **-R-D/E*-E31 SOL b SOL a
φ 5.5(Dia 0.22)
(1.48)
37.5
109(4.29) 48.5(1.91)
157.5(6.20)
60.5(2.38) 218(8.58)
Space required for coil removal
0.75(0.03)
30(1.18)
12(0.47)
21.5(0.85)
12.7 27(1.06) 11.5(0.45)
27.5(1.08) (0.45)
11.5
(0.50)
T
43.5(1.71)
T
15.5(0.61)
70(2.76)
55(2.17)
31.75(1.25)
25.9(1.02)
31(1.22)
A B
P B A
P
(0.30)
4- φ 7.5(Dia 0.30)
7.5
S-5
05S_Solenoid Valve(P01-12)_E.q 07.6.7 3:58 PM Page 6
26(1.02)
32(1.26)
B
T T
A
φ 2.8(Dia 0.11)
Note) 12(0.47)
SS-G03-H**-R-**-J21 Indicator light
The solenoid is on the opposite side of that shown for SOLa in SOL. a
the illustrations shown here.
SS-G03-**-*R-**-J21 SS-G03-**-*R-**-21
φD φ6.8(Dia 0.27) φ8.5(Dia 0.33) 2 to G (Previously PF) 1/2
L 60.5(2.38) 58(2.28)
φD
105.5(4.15)
92(3.62)
68.5(2.70)
SOL. b
36(1.42)
L
SS-G03-C**-R-C*-E21 93(3.66)
70(2.76)
SS-G03-E**-R-C*-E21 117.5(4.63) 60.5(2.38)
Manual push-button
178(7.01)
SOL. b SOL. a
DC Solenoid and Rectifier
SS-G03-A **-R-D*/E*-E21
SS-G03-H **-R-D*/E*-E21 117.5(4.63) 117.5(4.63)
55(2.17) 235(9.26)
SS-G03-C **-R-D*/E*-E21
Space required for coil removal
SS-G03-E **-R-D*/E*-E21
SOL. b SOL. b
P
114(4.49)
70(2.76)
92(3.62)
16.6(0.65)
46(1.81)
MSA-03-E10 3/8
4- φ 11 holes 1/4-20 2.3kg
MSA-03X-E10 1/2
9.5(0.37)
93(3.66)
25(0.98)
(Dia 0.43)
100(3.94) Gasket surface dimensions
ISO 4401-05-04-0-94
( )
(1.38)
35
A
(0.87) (1.26)
22 32
T B
5(0.20)
4-“E” NPT
30 16
(1.18) (0.63)
S-6
05S_Solenoid Valve(P01-12)_E.q 07.6.7 3:58 PM Page 7
Wiring Diagram
50/60Hz
G01 E31
AC Solenoid SS- -***-R-C*-
G03 E21
COM
50/60Hz
50/60Hz
G01 E31
Built-in Rectifier SS- -***-R-E*-
G03 E21
COM
G01 E31
DC Solenoid SS- -***-R-D*-
G03 E21
COM
S-7
05S_Solenoid Valve(P01-12)_E.q 07.6.7 3:58 PM Page 8
1.4 14.3
A5, H5, C5, C6S b b b b −
1.2 12.2 SS-G01
C1, C1S b b a b −
1.0 10.2
C2 a b b b −
0.8 8.2
d C6 b b a a −
0.6 6.1
C7Y f f e e c
0.4 4.1
C8 a f b e c
0.2 2.0
C9 a a b b −
0 20 40 60 80 100
Flow rate r/min
g e d {kgf/cm 2 }
Pump
1.6 16.3 Type Flow Path P/A P/B A/T B/T P/T
1.2 12.2
H5 c − − c −
MPa
c A3Z, H3Z a a d d −
0.8 8.2
f E3Z b b a a −
0.6 6.1
b C1 c c a c −
SS-G03
0.4 4.1 C2 a c c c −
A4, H4, C4 a a a a a
0.2 2 a
C5, C1S, C6S c c c c −
0 20 40 60 80 100 120 140 160 C6 c c a a −
C7Y g g g g f
Flow rate r/min
C8 a g a g f
C9 a a c c −
S-8
05S_Solenoid Valve(P01-12)_E.q 07.6.7 3:58 PM Page 9
A L
Flow rate
100 50
r/min
40
M
80 30
B N
C O
Flow rate
20
r/min
D
60 10
E P
F
0
G 10 20 25
40 {102} {204} {255}
H
Pressure MPa
I {kgf/cm 2}
20 J
K
0
10 20 30 35
{102} {204} {306} {357}
Pressure MPa
{kgf/cm 2}
S-9
05S_Solenoid Valve(P01-12)_E.q 07.6.7 3:58 PM Page 10
A2X − F E ⎯ E F
H2X − E F ⎯ F E
E2X − C C ⎯ C C
A3X A E E A D F
H3X A E E A F D
A3Z A A C A C C
H3Z A C A A C C
E3X, E3Z A C C A C C
A5 A − D A − E
H5 A D − A E −
C1, C1S, C5, C6, C6S A D D A E E
C2 A G D A G E
A4, H4, C4 A A A A A A
C9 A G G A G G
C7Y, C8 B B B Note1) B(H) B(H) B(H)
140 160 A
A
120 140
Flow rate
Flow rate
100 120
r/min
r/min
100 B
80
80 C
60 B
60 H
F G
40 E D
C 40
E D
20 G 20 F
10 20 30 35 0 10 20 30 35
0
{102} {204} {306} {357} {102} {204} {306} {357}
2 2
Pressure MPa{kgf/cm } Pressure MPa{kgf/cm }
A2X − E F
H2X − F E
E2X − C C
A3X A D F
H3X A F D
A3Z A C C
H3Z A C C
E3X, E3Z A C C
A5 A − E
H5 A E −
C1, C1S, C5, C6, C6S A E E
C2 A G E
A4, H4, C4 A A A
C9 A G G
C7Y, C8 Note1) B(H) B(H) B(H)
140
A
120
Flow rate
100
r/min
B
80
60
G H
E
40
C
20 F D
0 10 20 25
{102} {204} {255}
2
Pressure MPa{kgf/cm }
Note) 1.Letter in parentheses is for solenoid with built-in rectifier (E*), but without Quick Return, and for DC solenoid (D*) with surge voltage absorbing
diode on the electrical circuit.
2.There is no shockless type for the AC solenoid (C*), so use a solenoid with built-in rectifier (E*) when shockless operation is required with an AC
power supply.
3.The maximum flow rate is the allowable value of each port.
S-10
05S_Solenoid Valve(P01-12)_E.q 07.6.7 3:58 PM Page 11
Cross-sectional Drawing
SS-G01-A**-R-C*-E31 SS-G01-C**-R-C*-E31
13 20 14 15 16 13 20 14 15 16
10 18 11 12 6 19 17 3 1 7 4 5 8 2 11 12 9 19 5 4 17 3 1 7 18 10
SS-G01-A**-R-D/E*-E31 SS-G01-C**-R-D/E*-E31
13 20 14 15 16 13 20 14 15 16
10 18 11 12 6 19 17 3 1 7 4 5 8 2 11 12 9 19 5 4 17 3 1 7 18 10
List of Sealing Parts Part No. Part Name Part No. Part Name
1 Body 11 Rod
Part Q'ty
Part Name Part Number 2 Plug 12 Solenoid guide
No. Single Double
3 Spool 13 Solenoid coil
Solenoid Solenoid
S-11
05S_Solenoid Valve(P01-12)_E.q 07.6.7 3:58 PM Page 12
Cross-sectional Drawing
SS-G03-A**-R-C*-E21 SS-G03-C**-R-C*-E21
19 20 12 15 16 18 2 19 20 12 15 16 18 10
8 10 11 9 7 5 3 17 1 6 4 8 11 9 7 4 3 17 1 6
SS-G03-A**-R-D/E*-E21 SS-G03-C**-R-D/E*-E21
19 20 12 15 16 18 2 19 20 12 15 16 18 10
8 10 14 13 11 9 7 5 3 17 1 6 4 8 14 13 11 9 7 4 3 17 1 6
List of Sealing Parts Part No. Part Name Part No. Part Name
1 Body 14 Coil yoke
Part Type/Part Number Q'ty
Part Name 2 Plug 15 Terminal box kit
No. AC SOL. DC SOL. Single Double
3 Spool 16 Nameplate
Solenoid Solenoid
S-12
05S_Solenoid Valve(P13-24)_E.q 07.6.7 3:54 PM Page 13
Features
qVery long life eShockless yWide-ranging backward compatibility makes it
The movable iron core of the wet type solenoid A switching speed adjustment mechanism simple to replace previous valve models with
is immersed in oil, which keeps it lubricated and enables direct, shockless operation (Option F). this one. Combining this valve with a modular
cushions it from impact and vibration, ensuring rNo surge voltage valve contributes to the compact configuration of
very long life. Sparking and surge voltage during solenoid the overall device.
wLow switching noise switching is canceled for stable switching uGlobal support (G01 size)
The wet-type solenoid valve provides very low (Option G). Meets overseas safety standards (CE, UL, and
core switching noise, for quiet operation. tEasy coil replacement CSA). It can be safely used anywhere in the
A DIN connector type coil enables one-touch coil world. Contact your agent for certified products.
replacement.
Specifications
SA-G01 SA-G03
Standard Type
Model No.
Standard Type Shockless Type DC Solenoid Type Shockless Type
AC Solenoid Type
(With built-in rectifier)
Operation Maximum Maximum Working Maximum Maximum Working Maximum Maximum Working Maximum Maximum Working Maximum Maximum Working
JIS Symbol Flow Rate Pressure Flow Rate Pressure Flow Rate Pressure Flow Rate Pressure Flow Rate Pressure
Symbol r/min MPa{kgf/cm2} r/min MPa{kgf/cm2} r/min MPa{kgf/cm2} r/min MPa{kgf/cm2} r/min MPa{kgf/cm2}
(gpm) (psi) (gpm) (psi) (gpm) (psi) (gpm) (psi) (gpm) (psi)
-A2X-
40
-H2X- 30 30 (10.6) 85 85
(7.9) (7.9) 85 (22.4) (22.4)
-E2X-
(22.4)
-A3X-
80
(21.1)
-H3X-
100
-E3X-
(26.4)
-A3Z-
65
-H3Z-
(17.1)
-E3Z-
--A4-
50
(13.2) 35{357} 35{357}
-H4-
(5000) (5000)
35 25{255} 25{255}
-A5-
(5000) 50 (3571) 130 160 130 (35.71)
(13.2) (34.3) (42.2) (34.3)
-H5-
-C2-
100
-C5-
(26.4)
-C9-
-C1S-
-C6S-
-C1- AC Solenoid
65 (17.1)
DC Solenoid
-C6- 80 (21.1)
-C4-
50
-C7Y-
(13.2) 40 70 25{255} 100 25{255} 85
(10.6) (18.5) (3571) (26.4) (3571) (22.4)
-C8-
Note) The maximum flow rate of each valve depends on the pressure. For details, see pages S-9 and S-10.
S-13
05S_Solenoid Valve(P13-24)_E.q 07.6.7 3:54 PM Page 14
SA-G01 SA-G03
DC Solenoid DC Solenoid
AC Solenoid AC Solenoid
Built-in Rectifier Built-in Rectifier
C* E* D* C* E* D*
Maximum
Working P, A, B ports 35(25)MPa{357(255)kgf/cm2}(Note1)
Pressure
Maximum
Allowable T port 21MPa{214kgf/cm2} 16MPa{163kgf/cm2}
Backpressure
Standard Type 300 300 240 240
Switches/min. 120 120
Shockless Type ⎯ 120 ⎯ 120
Indicator light R R
Shockless ⎯ F ⎯ F
⎯ ⎯
Option
Surgeless G G G G
G Screw Connector J ⎯ J J ⎯ J
With manual push-button N N
Quick Return ⎯ Q ⎯ ⎯ Q ⎯
Weight
10 −24 × 1 3/4
1/4−20 × 2 3/4
M6 10 to 13N.m{102 to 133kgf.cm}
M5 5 to 7N.m{51 to 71kgf.cm}
Tightening Torque (M8 20 to 25N.m{204 to 255kgf.cm})
10−24 to 3.6−5.1Lbs.ft.
1/4−20 to 7.2−9.4Lbf.ft.
Note) 1.Maximum operating pressure depends on the valve type. For details, see page S-13.
2.The power supply type for E* is IP64 (dust-tight, splash-proof).
3.For mounting bolts, use 12T or equivalent.
Notes
zPipe system so that tank line is nDo not supply electric power to the uous in order that the changeover
always filled with oil. AC solenoid unless the coil is position may be firmly maintained.
xSurge pressure should be kept mounted to the valve. ⁄0Resistance force against the manu-
below maximum tank line back mProvide drain piping from the T al override pin changes, depending
pressure rating. port, when valve spool types are on the back pressure of the tank
cWhen using a 4-way valve as a 2- A2X, H2X, E2X. line.
way or 3-way and blocking unused ,If the changeover position is kept ⁄1Solenoid coil could be hot by con-
ports lowers the maximum flow. under high pressure for an extend- tinuous operation. Do not touch the
vKeep hydraulic oil clean. (Degree of ed period, malfunctions may occur coil directly by hand.
contamination: NAS grade 12 or due to hydraulic lock. Please con- ⁄2Gasket dimension
better). When petroleum hydaulic sult us when you have such appli- SA/SS-G01 = ISO 4401-03-02-0-94
oil is used, it should conform to ISO cation. SA/SS-G03 = ISO 4401-05-04-0-94
VG32, 46. .When the detent-type (E2X, E3X,
bDo not exceed permissible voltage E3Z) is used, we recommend that
range of the coil used. the electric power supply be contin-
S-14
05S_Solenoid Valve(P13-24)_E.q 07.6.7 3:54 PM Page 15
Solenoid
Voltage Frequency For SA-G01 For SA-G03
Type
Supply
(V) (Hz) Solenoid Coil Drive Current Holding Current Holding Allowable Solenoid Coil Drive Current Holding Current Holding Allowable
Voltage Voltage
Type Type (A) (A) Power (W) Range (V) Type (A) (A) Power (W) Range (V)
E2 AC200 50/60 EAC64-E2-1A 0.15 26 180 to 220 EBB64-E2 0.22 37.0 180 to 220
D1 DC12 ⎯ EAC64-D1-1A 2.2 26 10.8 to 13.2 EBB64-D1 2.6 31.0 10.8 to 13.2
DC
D2 DC24 ⎯ EAC64-D2-1A 1.1 26 21.6 to 26.4 EBB64-D2 1.5 36.0 21.6 to 26.4
S-15
05S_Solenoid Valve(P13-24)_E.q 07.6.7 3:54 PM Page 16
(Dia 1.10)
Push-button
Can be locked by pressing
φ 28
the button and rotating 90°.
φD
PG11
H Stroke S
L
SW
Surge absorber
1 3
Power supply
Recovery Time
Limiter Circuit
Solenoid
+
Circuit
–
2 4
50(1.97)
48(1.89) 21(0.83)
5(0.20)
36±0.2 2 to φ 4.5 hole
(1.42±0.01)
(Dia 0.18)
to 2
–4
32
(1.26)
1 to
3+
S-16
05S_Solenoid Valve(P13-24)_E.q 07.6.7 3:54 PM Page 17
92.5(3.64)
81(3.19)
48(1.89)
SOL b
(1.48)
37.5
φ 5.5(Dia 0.22)
25.5(1.00)
46(1.81)
66(2.60)
Manual push-button
102(4.02) 39(1.54)
141(5.55)
SA-G01-C**-R-C*-E31
SA-G01-E**-R-C*-E31
SOL b SOL a
102(4.02) 102(4.02)
49.8(1.96) 204(8.03)
Space required for coil removal
DC Solenoid and Rectifier
SA-G01-A**-D*/E*-E31
SA-G01-H**-D*/E*-E31 49(1.93)
SA-G01-C**-D*/E*-E31
SA-G01-E**-D*/E*-E31
1)92.5(3.64)
2)81(3.19)
Note) 1.SA-G01-H**-*-D*/E*-E31
48(1.89)
37.5(1.48)
SOLa in the illustrations shown here.
2.SA-G01-**-E*-E31
Dimension 1 is 96.
Dimension 2 is 73.
φ 5.5(Dia 0.22)
25.5(1.00)
46(1.81)
109(4.29) 39(1.54)
Manual push-button
148(5.83)
60.5(2.38) 218(8.58)
Space required for coil removal
0.75(0.03)
30(1.18)
12(0.47)
41.5(1.63)
5.1(0.20)
(0.50)
T
43.5(1.71)
T
15.5(0.61)
70(2.76)
55(2.17)
31.75(1.25)
25.9(1.02)
31(1.22)
A B
P B A
P
(0.30)
4- φ 7.5(Dia 0.30)
7.5
S-17
05S_Solenoid Valve(P13-24)_E.q 07.6.7 3:54 PM Page 18
60.5(2.38)
Note) SA-G03-H**-*-C*-E21 φD
The solenoid is on the opposite side of that shown for
100.5(3.96)
112(4.41)
SOLa in the illustrations shown here.
68.5(2.70)
SA-G03-**-*-**-E21 SA-G03-**-*-**-E21
SOL. b
φD φ 6.8(Dia 0.27) φ 8.5(Dia 0.33)
L
36(1.42)
L 60.5(2.38) 58(2.28)
70(2.76) 93(3.66)
SA-G03-C**-*-C*-E21 Manual push-button 117.5(4.63) 60.5(2.38)
178(7.01)
SA-G03-E**-*-C*-E21
SOL. b SOL. a
117.5(4.63) 117.5(4.63)
55(2.17) 235(9.26)
DC Solenoid and Rectifier
SA-G03-A**-*-D*/E*-E21 Space required for coil removal
SA-G03-H**-*-D*/E*-E21
SA-G03-C**-*-D*/E*-E21 60.5(2.38)
SA-G03-E**-*-D*/E*-E21
Note) 1.SA-G03-H**-*-D*/E-E21
2)100.5(3.96)
1)112(4.41)
P
114(4.49)
70(2.76)
92(3.62)
16.6(0.65)
46(1.81)
A B
T For sub plate SA-G03
Mounting bolt Model No. E Weight
4- φ 11 holes 1/4-20 MSA-03-E10 3/8
9.5(0.37)
93(3.66)
25(0.98)
(
ISO 4401-05-04-0-94
JIS B 8355 D-05-04-0-94
)
5(0.20)
A
(0.87) (1.26)
22 32
T B
5(0.20)
4-“E” NPT
30 16
(1.18) (0.63)
S-18
05S_Solenoid Valve(P13-24)_E.q 07.6.7 3:54 PM Page 19
¡Connectors
G01 E31
SA- -***-R-C*-
G03 (J)E21
(EA41-R*-1C)
G01 E31
SA- -***-GR-C*-
G03 (J)E21
(EA41-GRC*-1C)
Connect the power sup-
ply to terminals No.1
and No. 2. The termi-
nal is ground. Use this
terminal as required.
G01 E31
SA- -***-R-D*-
G03 (J)E21
(EA41-DR*-1C)
G01 E31
SA- -***-GR-D*-
G03 (J)E21
(EA41-GRD*-1C)
G01 E31
SA- -***-E*-
G03 (J)E21 Connect the power sup-
(EA42-1B) ply to the terminals on
the board.
Power supply When ground connec-
terminal tion is required, remove
the board and use the
terminal. In this case,
do not connect the
G01 E31 power supply to the No.
SA- -***-R-E*-
G03 (J)E21 1 and No. 2 terminals.
(EA42-R*-1B)
S-19
05S_Solenoid Valve(P13-24)_E.q 07.6.7 3:54 PM Page 20
1.6 16.3
b a A4, H4, C4 a a a a a
c
MPa
1.4 14.3
A5, H5, C5, C6S b b b b ⎯
1.2 12.2 SA-G01
C1, C1S b b a b ⎯
1.0 10.2
C2 a b b b ⎯
0.8 8.2
d C6 b b a a ⎯
0.6 6.1
C7Y f f e e c
0.4 4.1
C8 a f b e c
0.2 2.0
C9 a a b b ⎯
0 20 40 60 80 100
Flow rate r/min
Pump Type Flow Path P/A P/B A/T B/T P/T
A5 ⎯ c c ⎯ ⎯
1.6 16.3
H5 c ⎯ ⎯ c ⎯
1.4 14.3
A3X, H3X, E3X c c d d ⎯
Pressure Loss
⎯
MPa
E3Z b b a a
1.0 10.2
C1 c c a c ⎯
0.8 8.2 c SA-G03
f C2 a c c c ⎯
C8 a g a g f
0 20 40 60 80 100 120 140 160
C9 a a c c ⎯
Flow rate r/min
S-20
05S_Solenoid Valve(P13-24)_E.q 07.6.7 3:54 PM Page 21
A L
100 50
Flow rate
r/min
40
M
80 30
B N
C O
Flow rate
20
r/min
D
60 10
E P
F
0
G 10 20 25
40 {102} {204} {255}
H Pressure MPa
{kgf/cm2}
I
20 J
K
0
10 20 30 35
{102} {204} {306} {357}
Pressure MPa
{kgf/cm2}
S-21
05S_Solenoid Valve(P13-24)_E.q 07.6.7 3:54 PM Page 22
A2X ⎯ F E ⎯ E F
H2X ⎯ E F ⎯ F E
E2X ⎯ C C ⎯ C C
A3X A E E A D F
H3X A E E A F D
A3Z A A C A C C
H3Z A C A A C C
E3X, E3Z A C C A C C
A5 A ⎯ D A ⎯ E
H5 A D ⎯ A E ⎯
C1, C1S, C5, C6, C6S A D D A E E
C2 A G D A G E
A4, H4, C4 A A A A A A
C9 A G G A G G
C7Y, C8 B B B Note1) B(H) B(H) B(H)
140 160 A
A
120 140
Flow rate
Flow rate
100 120
r/min
r/min
100 B
80
80 C
60 B
60 H
F G
40 E D
C 40
E D
20 G 20 F
10 20 30 35 0 10 20 30 35
0
{102} {204} {306} {357} {102} {204} {306} {357}
2 2
Pressure MPa{kgf/cm } Pressure MPa{kgf/cm }
Shockless Type, with DC solenoid
Model No.
SA-G03-**-F-**-E21
Operation
Example b
A B
a b A B a b
A B
a
Operation
Symbol P T P T P T
A2X ⎯ E F
H2X ⎯ F E
E2X ⎯ C C
A3X A D F
H3X A F D
A3Z A C C
H3Z A C C
E3X, E3Z A C C
A5 A ⎯ E
H5 A E ⎯
C1, C1S, C5, C6, C6S A E E
C2 A G E
A4, H4, C4 A A A
C9 A G G
C7Y, C8 Note1) B(H) B(H) B(H)
140
A
120
Flow rate
100
r/min
B
80
60
G H
E
40
C
20 F D
0 10 20 25
{102} {204} {255}
2
Pressure MPa{kgf/cm }
Note) 1.Letter in parentheses is for solenoid with built-in rectifier (E*), but without Quick Return, and for DC solenoid (D*) with surge voltage absorbing
diode on the electrical circuit.
2.There is no shockless type for the AC solenoid (C*), so use a solenoid with built-in rectifier (E*) when shockless operation is required with an AC
power supply.
3.The maximum flow rate is the allowable value of each port.
S-22
05S_Solenoid Valve(P13-24)_E.q 07.6.7 3:54 PM Page 23
Cross-sectional Drawing
SA-G01-A**-C*-E31 SA-G01-C**-C*-E31
13 20 14 15 16 13 20 14 15 16
10 18 11 12 6 19 17 3 1 7 4 5 8 2 11 12 9 19 5 4 17 3 1 7 18 10
SA-G01-A**-D/E*-E31 SA-G01-C**-D/E*-E31
13 20 14 15 16 13 20 14 15 16
10 18 11 12 6 19 17 3 1 7 4 5 8 2 11 12 9 19 5 4 17 3 1 7 18 10
List of Sealing Parts Part No. Part Name Part No. Part Name
1 Body 11 Rod
Part Q'ty
Part Name Part Number 2 Plug 12 Solenoid guide
No. Single Double
3 Spool 13 Solenoid coil
Solenoid Solenoid
S-23
05S_Solenoid Valve(P13-24)_E.q 07.6.7 3:54 PM Page 24
Cross-sectional Drawing
SA-G03-A**-C*-(J)E21 SA-G03-C**-C*-(J)E21
20 15 21 14 16 17 19 2 20 15 21 14 16 17 19
8 10 11 9 7 5 3 18 1 6 4 8 10 11 9 7 4 3 18 1 6
SA-G03-A**-D/E*-(J)E21 SA-G03-C**-D/E*-(J)E21
20 15 21 14 16 17 19 2 20 15 21 14 16 17 19
8 10 13 12 11 9 7 5 3 18 1 6 4 8 10 13 12 11 9 7 4 3 18 1 6
List of Sealing Parts Part No. Part Name Part No. Part Name
1 Body 11 Solenoid coil
Part Type/Part Number Q'ty
Part Name 2 Plug 12 Coil case
No. AC SOL. DC SOL. Single Double
3 Spool 13 Coil yoke
Solenoid Solenoid
S-24
05S_Solenoid Valve(P25-43)_E.q 07.6.7 4:00 PM Page 25
Features
qLow current, low power wDirectly drivable by a pro- eLittle coil temperature rise
The SE series magnetic switching grammable controller Low power operation means there is little
valve’s solenoid has significantly lower Low-current operation means not only heat generated from the coil, which mini-
power consumption. allows direct drive by a programmable con- mizes the effects of heat on mechanisms.
troller (PC) output circuit, it also enables the Even with the AC solenoid, there is little
use of a compact and simple control circuit. chance of coil burnout.
¡Handling
Specifications zIn order to realize the full benefits of the
SE-G01-**-GR-**-30 SE-G03-**-GR-**-(J) 20 solenoid valve, configure piping so oil is
Operation Rated Flow Rate Maximum Rated Flow Rate Maximum
constantly supplied to the T(DR) port.
- Maximum Flow - Maximum Flow
Symbol JIS Symbol Rate Working Pressure JIS Symbol Rate Working Pressure xEnsure that surge pressure in excess of the
R/min(gpm) MPa{psi} R/min(gpm) MPa{psi}
maximum allowable back pressure can be
A B b AB
A2X
b 30 100 accidentally at the T port.
(7.9) 10 DR(T) (26.4) cNote that the maximum flow rate is limited
P T P
b A B
35 (1428) b A B
80 when used as a four-way valve, or by block-
A3X
P T
(9.2)
P T
(21.1) ing ports for use as a two-way valve or one-
AB a 100
way valve.
H2X
(26.4) vAlways keep the operating fluid clean.
P DR(T)
Allowable contamination is class NAS12 or
80
H3X less.
(21.1)
bWhen using petroleum type operating fluid,
b A B a 100 use JIS K 2213 Class 1 or Class 2, or
E3X
(26.4)
30 P T equivalent.
(7.9) A B
40 nBe sure to note the allowable pressure
b a 21
C4
10 P T
(10.6) (3000) range of the coil being used.
(1428)
b
A B
a
mMaintaining a switching position under high
C5 pressure for a long period can cause abnor-
40 P T
(10.6) A B mal operation due to hydraulic lockup.
b a
C6 100 Contact your agent when you need to main-
P T
tain a switching position for a long period.
A B
C6S b a ,When using a detent type (E3X), provide
P T constant energization when secure mainte-
A B
C7Y
b a 40 nance of the switching position is required.
P T
(10.6) .Note that manual pin operating pressure
b
A B
a 100 changes in accordance with tank line back
C1
P T
(26.4) pressure.
Note) The maximum flow rate of each valve depends on the pressure. For details, see page S-29.
3) Never close the T (DR) port. Be sure to run piping from it.
The following shows the required circuit configurations in this case.
4) A resistance valve is built in for flow paths C4 and C7Y, so
there is no need to provide an external check valve.
5) Generally, operating fluid flow in the following directions:
P/A, P/B, A/T, P/T. Do not configure for reverse
flow.
b A B b A B
P T P DR(T)
S-25
05S_Solenoid Valve(P25-43)_E.q 07.6.7 4:00 PM Page 26
SE-G01-30 SE-G03-20
D2 E1 E2 C1 C2 D1 D2
Indicator light R
Standard GR GR
Surgeless
Dust Resistance/Water Resistance Rank JIS C0920 IP55 (Dust-tight, Rain-proof) JIS C0920 IP63 (Dust-tight, Rain-proof)
M5 x 35 (Four)
Mounting bolt M5 x 30 (Four)
Bundled (M8 x 70 (Four))
Accessories M6 10 to 13N.m {102 to 133kgf.cm}
Tightening Torque 5 to 7N.m{51 to 71kgf.cm}
M8 20 to 25N.m {204 to 255kgf.cm}
Power supply
C: AC (50/60Hz) C1=AC100V C2=AC200V (Applicable for size 03 only)
D: DC D1=DC12V D2=DC24V (D1 is applicable for size 03 only)
E: For AC (joint 50/60 Hz inside rectifier) E1=AC 100 V E2=200 V (applicable for size 01 only)
Auxiliary symbol
GR: Surgeless type with indicator (applicable for power supply C , D only)
R2: With indicator light (applicable for power supply E only)
X Y
Closed Semi-open
P T P T P T P T P T P T P T
Operation Method
A H C E
Spring Offset Spring Center Detent
b A B A B a A B b A B a
b a
P T P T P T P T
Mounting method
G: Gasket type
Low-power solenoid
S-26
05S_Solenoid Valve(P25-43)_E.q 07.6.7 4:00 PM Page 27
50 80 to 110
AC100 SLH1- 0.07 6.5
Built-in rectifier type AC
E1 60 025B-
R1-01 90 to 120
AC110 60 0.08 7.9
50 160 to 220
AC200 SLH1- 0.05 8.1
E2 60 025B-
R2-01 180 to 240
AC220 60 0.05 9.87
EE64-
D1 DC12 − 0.4 4.8 10.8 to 13.2
01D1-1A
DC
SLH1-
EE64-
D2 DC24 − 025B- 0.2 4.8 21.6 to 26.4 0.2 4.8 21.6 to 26.4
01D2-1A
D2-01
31.75 8.5
15.5
5.1
0.75
25.9
48
12.7
21.5
30.2
12.5 40.5
88.2 68 13.5
Space required for solenoid removal 237.9
2-G1/2 169.7
5 93.7
91.9
73
25
22
SE-G01-C**-GR-**-30
SE-G01-E3X-GR-**-30
Space required for solenoid removal 380.8
244.4
5 93.7
22
S-27
05S_Solenoid Valve(P25-43)_E.q 07.6.7 4:00 PM Page 28
SOL b
105
88
38
26.5
1)
2)
φ 6.5
70
96
Manual push-button 113.5 71
184.5
113.5 113.5
30 227
Space required for coil removal
SOL b SOL a
DC Solenoid
SE-G03-A**-GR-D*-J20
SE-G03-H**-GR-D*-J20
SE-G03-C**-GR-D*-J20
SE-G03-E**-GR-D*-J20 118.5 71
189.5
35 237
Space required for coil removal
Note) Gasket surface dimensions and the sub plate are the same as those for SS-G03. See page S-6 for more information.
Wiring Diagram
SE-G01 SE-G03
Lamp SOL b
Ground terminal
Solderless terminal for M3.5
Note) 1.Wiring is simple for a double solenoid valve so 3.Use the ground terminal when grounding is
common terminal hardware is used. When the required.
common terminal hardware is not used, remove 4.The tightening torque of terminal screws is 0.5 to
the terminal screws. 0.7Nm {5.1 to 7.1kgf . cm}.
2.Use the ground terminal when grounding is required. 5.There is no wiring polarity for the DC solenoid.
S-28
05S_Solenoid Valve(P25-43)_E.q 07.6.7 4:00 PM Page 29
Pressure Loss
d
1 A3X e e d d −
c
MPa
E3X e e d d −
0.75 SE-G01
C4 a a a a a
C5 e e c c −
0.5
b C6 e e b b −
0.25
a
0 10 20 30 40
Flow rate r/min
2
{kgf/cm } Pump Type Flow Path P/A P/B A/T B/T P/T
2.0 20.4
f A2X, H2X b b − − −
e c
1.6 16.3 A3X, H3X b b c c −
b
−
Pressure Loss
C1 b b a b
1.2 a 12.2
SE-G03 C4 e e a a e
MPa
0 20 40 60 80 100
Flow rate r/min
120
50
Flow rate
A 100 J
r/min
Flow rate
40
r/min
D
B 80 L
30
C E
60
20
40 M
10
20 K
0 2{20} 6{61} 10{102}
2 0 7{71} 14{143} 21{214}
Pressure MPa{kgf/cm }
Pressure MPa{kgf/cm2}
Note) 1.The maximum flow rate is the value when a rated 90%V is applied following solenoid temperature rise and saturation.
2.The maximum flow rate is the allowable value of each port.
S-29
05S_Solenoid Valve(P25-43)_E.q 07.6.7 4:00 PM Page 30
Cross-sectional Drawing
SE-G03-A3X-GR-**-30
15 19 13 14
18 16 17 9 1 11 3 7 6 12 2
SE-G03-A3X-GR-**-20
15 19 13 14
Note) O-ring 1A-** and 1-B** indicate JIS Standard B 2401-1A-** and 1B-**.
S-30
05S_Solenoid Valve(P25-43)_E.q 07.6.7 4:00 PM Page 38
Features
qLong-life operation is ensured by use wide-ranging low pressure loss and used for the internal pilot valve
of the high-performance, renowned enhanced system circuit efficiency. (option), pilot pressure required for
SS (SA)-G01 wet solenoid valve as rInternal modification of the pilot and switching is self-maintained.
the pilot valve. drain can be accomplished without
wHigh pressure, high capacity removing the valve by simply con-
The 06 size delivers up to 600 R/min. necting and disconnecting plugs.
eLow pressure loss tBuilt-in pilot pressure check valve
An original flow path design provides When tandem center type valve is
Specifications
Valve Size 06 Size
Built-in Pilot Pressure Check Valve Type (For Internal Pilot) 0.45 {4.6}(65.7) (for *3Z, *4, *7*, *8 pilot pressure generation)
Dust-resistance/Water-resistance Rank JIS C 0920 DSS: IP64 (Dust-tight, Splash-proof) DSA: IP65 (Dust-tight, Waterjet-proof)
Note) 1.The maximum flow rate of each valve depends on the pressure. For details, see pages S-42.
2.Weight in parentheses is for stroke adjustment type.
3.Solenoid specifications are the same as those for SS (SA)-G01. For more information, see pages S-3 and S-15.
S-38
05S_Solenoid Valve(P25-43)_E.q 07.6.7 4:00 PM Page 39
¡Handling
zPilot pressure values show the differen- restrictor C7Y is standard. E3Z, C4, D4), PT mounting type (C7X,
tial pressure between the pilot port and vWhen adjustable spool stroke is desired, C7Y, D7X, D7Y), and PAT mounting type,
tank port or drain port. In the case of the specify L in the auxiliary symbol position use the type with built-in external pilot
pressure center, they show differential of the model number. Note, however, pressure check valve.
pressure between the pilot and drain that this is not available with the pressure ,The coil surface temperature increases if
ports (DR1, DR2). center type. this valve is kept continuously energized.
xThe standard configuration is internal bWhen using a detent type (E3*), use con- Install the valve so there is no chance of
pilot and external drain, but other config- stant energization in order to securely it being touched directly by hand.
urations are possible when required. See maintain the switching position.
page S-43 for more information. nUse of the pressure center type is recom-
cFor the PT mounting type DSS (DSA)- mended for large-volume flow control.
G**-C7*-**-22, open cross over with mFor the all ports open center type (A3Z,
Front Position
A B
b a
Simplified Symbols
P T Y(DR1)
A' B'
b a
Detailed Symbols
P' T'
Y(DR1)
P T
AB
Adjustable Stroke
A port side B port side
Adjusting Screw Positions
S-39
05S_Solenoid Valve(P25-43)_E.q 07.6.7 4:00 PM Page 40
Power supply
C: AC (50/60Hz) C1=AC100V C115=AC110V C2=AC200V C230=AC220V
D: DC D1=DC12V D2=DC24V
E: AC (Built-in rectifier; 50/60Hz)
E1=AC100V E115=AC115V E2=AC200V E230=AC230V
Auxiliary symbol (For multiple specifications, use alphabetic sequence.
A: Internal drain Y: With meter-out flow N: With manual lock
E: External pilot regulator valve G: Surgeless type
L: Spool stroke limiter R: With indicator light Q: Quick return type
P: Flow regulator valve DSS type: Standard
to restrict P port DSA type: Optional
Pilot pressure check valve
None: No check valve
C: Built-in check valve X Y Z
Closed Semi-open Open
P T P T P T P T P T P T P T P T P T P T
Operation Method
A: Spring offset A E C D
E: No-spring detent Spring Offset No-spring detent Spring Center Pressure center
C: Spring center A B A B A B A B
D: Pressure center
P T Y(DR1) P T Y(DR1) P T Y(DR1) L(DR2) P T Y(DR1)
E NPT
E NPT
S-40
05S_Solenoid Valve(P25-43)_E.q 07.6.7 4:00 PM Page 41
DSS(DSA)-G06-A**-R-**-E22
(Spring Offset Type)
SOL a
212.5(8.37)
207(8.15)
191.5(7.54)
201(7.91)
145.5(5.73)
48(1.89)
43(1.69)
120(4.72)
41(1.61)
(0.24)
50.5
6
(1.99) 127.5(5.02) 58(2.28) 2- φ 6(Dia 0.24)
255(10.04) 116(4.57)
E
DSS(DSA)-G06- **-R-**-E22 DSS(DSA)-G06-D**-R-**-E22
C
(No-spring Detent Type) (Pressure Center Type)
(Spring Center Type) AC204(8.03)
DC218(8.58)
AC102(4.02)
DC109(4.29) SOL b SOL a
SOL b SOL a
101.5(4.00)
178.5(7.03)
306(12.05)
A
A
E
DSS(DSA)-G06- **-RY-**-E22 DSS(DSA)-G06-E**-LR-**-E22
C
C
D
(Flow Regulator Type) (Adjustable Stroke Type)
SOL b SOL a
SOL b SOL a
Lock nut
252.5(9.94)
247(9.72)
( ISO 4401-08-07-0-94
JIS B 8355 D-08-07-0-94 ) For sub plate DSS (DSA) -G06
154(6.06)
130.2(5.12)
112.7(4.44)
100.8(3.97)
94.5(3.72)
77(3.03) 2- φ 7x8 (pin hole)
53.2(2.09)
(Dia 0.28 x 0.31)
12(0.47) 29.4(1.16)
4.7(0.19)
17.5(0.69)
12(0.47)
5.6(0.22)
T P
19(0.75)
Y
46(1.81)
74.6(2.94)
73(2.87)
(0.69)
118(4.65)
17.4
92(3.62)
L 2- φ 11 holes(Dia 0.43)
A B
X
32(1.26) 25.3
(1.00) 6- UNC 1/2"
35(1.38) φ 11 hole(Dia 0.43) 180.8(7.12)
207(8.15)
4- φ 20 holes(Dia 0.79)
S-41
05S_Solenoid Valve(P25-43)_E.q 07.6.7 4:00 PM Page 42
DSS(DSA)-G06
Model No. JIS Symbol Pressure - Flow Rate Allowable Value Model No. JIS Symbol Pressure - Flow Rate Allowable Value
DSS(DSA) 1 1 DSS(DSA) 1 1
A B A B
2-Position Spring Offset Type
Flow rate
Flow rate
500 500
/min
/min
1 1 400 1 1 400
A B
A B
a 300 b a 300
-A3Z- -E3Z-
200 P T Y(DR1)
200
P T Y(DR1)
2 1 100 2 1 100
1 1
0 10{102} 20{204} 30{306} 1 1
0 10{102} 20{204} 30{306}
A B
a Pressure MPa{kgf/cm2} b A B
a Pressure MPa{kgf/cm2}
-A3Y- -E3Y-
P T Y(DR1) P T Y(DR1)
2 1 2 1
DSS(DSA) 1 1 DSS(DSA) 1 1
A B A B
b a b a
-G06 -G06
P T Y(DR1) L(DR2) P T Y(DR1)
-C1- 2 1 -D1- 2 1
PP-0.8MPa{8.2kgf/cm2}
1 1 1 1
A B A B
b a b a
-C2- -D2-
P T Y(DR1) L(DR2) P T Y(DR1)
2 1 2 1
PP-1.2MPa{12.2kgf/cm2}
1 1 1 1
A B A B
b a b a
-C5- 600 -D5-
Flow rate
2 1 2 1
400
300 1 1
3-Position Spring Center Type
Flow rate
Pressure MPa{kgf/cm2} 500
/min
1 1 1 1 400
A B A B
b a b a 300
-C6S- -D6S-
P T Y(DR1) L(DR2) P T Y(DR1)
200
2 1 2 1 100
1 1 1 1
b A B
a 600 b A B
a
Flow rate
-C7Y- P T Y(DR1)
0 10{102} 20{204} 30{306} -D7Y- L(DR2) P T Y(DR1)
2 5 4 Pressure MPa{kgf/cm2} 2 5 4
1
1.2{12.2} SOL, OFF
sec
0.10
0.8{8.2} P A Curve 1
SOL, ON
Curve 2 0.05
B T
0.4{4.1}
At center
P T Curve 4 0 5{51} 10{102} 15{153} 20{204} 25{255}
0 100 200 300 400 500 600
Pilot pressure MPa{kgf/cm2}
Flow rate /min
S-42
05S_Solenoid Valve(P25-43)_E.q 07.6.7 4:00 PM Page 43
Cross-sectional Drawing
DSS(DSA)-G06-C**-R-C*-E22
18 17 6
9 A 16 8 B
P
T
R C
P
R 10
X(PP)
15
Y(DR1)
P
7 Cross-sectional P-P Cross-sectional R-R
4 1 3 13 11 14 12 5 2
S-43
05S_Solenoid Valve(P44-48)_E.q 07.6.7 3:59 PM Page 44
Features
qThe function of two valves in one eSeparate control of forward and back ¡Handling
A two-speed controller provides smooth cylinder movement zValve differential pressure
speed adjustment from low speed to high, There are five volume settings for high- Volume adjustment becomes sensitive
and from high-speed to low. speed flow rate and acceleration/deceler- when P→A (B) and B(A)→T differential
wQuiet starts and stops ation times that can be independently pressure is large. Maintain the pressure dif-
ferential so it is no greater than 3.5MPa
A low-speed startup and stop feature adjusted SOL.a and SOL.b (ON side,
{35.7kgf/cm2}.
makes startups and stops smooth and OFF side).
xLow-speed flow rate
soft. The spool may not move if the low-speed
Specifications flow rate is below the minimum. Use this
valve only within the allowable minimum
Model No. SF-G01 SF-G01 SF-G01 low-speed flow rate range.
Item -C*10-D2-E10 -C*20-D2-E10 -C*40-D2-E10 cDeceleration circuit
Valve Maximum Operating Pressure MPa(psi) 21(3000) ¡Use a C5** spool for the deceleration
Maximum Flow Rate R/min(Note1)(gpm) 10(2.6) 20(5.3) 40(10.6) circuit. Deceleration is difficult with the
High-speed Flow Rate R/min(Note1)(gpm) 5 to 10(1.3 to 2.6) 10 to 20(2.6 to 5.3) 20 to 40(5.3 to 10.6)
C6S** spool.
Low-speed Flow Rate R/min(Note1)(gpm) 0.5 to 4(0.1 to 1.0) 2 to 8(0.5 to 2.1) 4 to 16(1.0 to 4.2)
¡When large deceleration is required or
Maximum Allowable Pressure MPa(psi) 7(1000)
for a system that uses a vertical cylin-
Acceleration/Deceleration Time Adjustment Range SEC 0.1 to 2
der, equip an external drain type
Hysteresis (Note 2) 7%
counter balance valve. See the illustra-
Repeatability (Note 2) 3%
Power Supply Voltage V D2: 24V DC regulated DC power supply
tion below.
Maximum Power Consumption W 36W vPilot check circuit
Dust Resistance/Water Resistance Rank JIS C0920 IP63 (Dust-tight, Rain-proof) ¡For a circuit with a pilot check valve,
Environment
Note) 1.The above high-speed and low-speed flow rates are obtained with a differential pressure
(PA, PB) of 1.0MPa {146psi}. The flow rates depend on differential pressure.
2.Hysteresis and repeatability values are those at maximum flow rate. DR
P T P T
S-44
05S_Solenoid Valve(P44-48)_E.q 07.6.7 3:59 PM Page 45
mNote the following points to optimize opera- (2)During the positioning operation following deceleration before stopping operation. If
tion. deceleration, make sure that sufficient low-speed operation time is too short can
(1)Control fluid temperature when using this low-speed running is provided following cause stopping during deceleration and
valve. Since the valve perform restrictor shock problems due to fluctuation in load,
valve control on all processes, tempera- Spool Type and JIS Symbols etc.
ture differential changes flow volume and
Spool Type C5** C6S**
acceleration/deceleration time. The rec-
ommended temperature range is 30°C to b A B a b A B a
60°C. JIS Symbol
P T P T
Electrical Wiring
¡Sink Type (Auxiliary Symbol: None) ¡Source Type (Auxiliary Symbol: A)
Switches on load and power supply minus Switches on load and power supply plus
side side
Switch SW2 ON
+ 24V DC regulated +
24V DC regulated High-speed
DC power supply – DC power supply signal
–
Switch SW1 ON
Low-speed
signal
High-speed signal High-speed signal Time
SW2 input terminal SW2 input terminal
Low-speed signal
SW1 input terminal COM terminal (–)
S-45
05S_Solenoid Valve(P44-48)_E.q 07.6.7 3:59 PM Page 46
31(1.22) 0.75(0.03)
SF-G01-C***-(A)R-D2-E10
15.5(0.61)
5.1(0.20)
T
32.5(1.28)
25.9(1.02)
B
A
37.5(1.48)
SOL b SOL a
25.5(1.00)
φ 5.5(Dia 0.22)
46(1.81) 66(2.60)
216(8.50)
20
C520
C6S20
10
C510
C6S10
0 10{102} 20{204}
Pressure MPa{kgf/cm2}
OFF
S-46
05S_Solenoid Valve(P44-48)_E.q 07.6.7 3:59 PM Page 47
Cross-sectional Drawing
SF-G01-C***-(A)R-D2-E10
19 18 10 13 14 8 9 17 12 11 7
S-47
SAW/DSW Series
Solenoid Valve with Monitoring Switch
For Press Safety Confirming Systems
SAW/DSW Series
Solenoid Valve with Monitoring Switch For Press Safety Confirming Systems
Safety is critical in the manufacturing industry. Today, most manufac-
turers rely on a conventional system that detects danger and stops a
machine during operation. In Japan, however, the trend is to utilize a
Safety Monitoring System to monitor safety and allow a machine to
operate after safety is confirmed. As new global safety standards are
established, it is predicted that these Safety Monitoring Systems will
be included in machine specifications at the design stage. Our
Solenoid Valve with Monitoring Switch, Japan’s first Safety
Monitoring System, is specially designed to meet the requirements
of machine integration and safety.
ISO 12100 will change the industry’s perception of mechanical hazard protection.
In the future, machines will require safety standards compliant with ISO 12100.
When hazard is detected, machine operation When safety is detected, machine operation
is not allowed and stopped. is allowed.
(Accidents cannot be avoided due to machine not (Accidents can be avoided due to machine not being
stopping, even after danger occurs when sensor allowed to operate when sensor breaks down or sig-
breaks down or signal wire is disconnected.) nal wire is disconnected.)
Features
This valve mechanically detects the movement of the solenoid valve spool to
activate the switch and to transmit an electrical ON/OFF signal. In other words,
this valve monitors a spool operating condition and can be used for sequence
control according to its ON/OFF signal. It is also an information source for
confirming safety conditions.
Fig.1 and 2 show the simplified actuation structure of a solenoid valve with Fig.1 Solenoid not energized
monitoring switch. When the spool is in center position, the fixed contact (Switch ON)
(blue) contacts the traveling contact (red) and the both contacts become in
conducting condition (Switch ON). When the solenoid is energized and the
spool moves right, the traveling contact (red) detaches from the fixed contact
(blue) in conjunction with the spool movement and both contacts become in
non-conducting condition (Switch OFF).
Hyd. Cylinder
Assuming that valve does not return
to neutral position (all ports blocked)
due to some kind of trouble even
Solenoid Valve after solenoid is turned off.
Monitoring Switch
Switch ON at neutral
position (confirming Safety Confirming Type System
safe condition)
• Cylinder continues moving.
• Safety cannot be confirmed because
signal of monitoring switch is not
turned ON.
Hyd. Pump
• Possible to ensure safety by prevent-
ing safety cover from opening and
detecting some kind of error.
Specifications
Series SAW-G01 SAW-G03 (Note 1) DSW-G04 (Note 1)
Operation Type Direct operated type spool valve Pilot operated type spool valve
Max. Working Pressure (Note 2) 35MPa (5,076psi)
Max. Flow Rate (Note 3) 100L/min (26.4gpm) 160L/min (42.2gpm) 300L/min(79.2 gpm)
Max. Allowable Back-Pressure 21MPa (3,046psi) 16MPa (2,320psi) 21MPa (3,046psi)
Dust Resistance/
Water Resistance Rank JIS C 0920 IP65
Environment
Operating
T P
A B
A
B
T T
P
110.5(4.350)
125.5(4.941)
92.5(3.642)
112(4.409)
70(2.756) 93(3.661)
46(1.811) 66(2.598) 135.5(5.335) 94.5(3.720)
119.5(4.705) 70.5(2.776) 230(9.055)
190(7.480)
169.5(6.673) 169.5(6.673)
339(13.346)
140.5(5.531) 140.5(5.531)
281(11.063)
r/min
20 to 380r
DMA Type Manually Operated Directional Valve
21MPa
Features
qCompact design. eD03 and D05 mounting pattern
wBalanced design allows T-port back alows the use of modular valves to
pressure up to 70 kgf/cm 2 (1000 simplify circuit design.
psi) in G03 and 160 kgf/cm2 (2286
psi) in G01 models.
Specifications
350, 250 (3571), Note 160 (2286) 40 (10.6) 4 (0.16) 4 (0.16) x 2 1.3 (2.9)
¡Notes
zThe following three different methods are available
to operate the valve handle.
20
10 (1) Spring offset type(A-type)
20 With this type, the lever is always kept at the end
10
20 position; when the lever is pulled, the flow is
10
20
changed over from one direction to another. But
10 when the lever is released, the flow returns to the
20 initial direction.
10 (2) Spring center type(C-type)
With this type, the spool is always kept at the center
20 between the other two valve positions; when the
10
lever is released after shifting the spool to either
one of these valve positions, the spool returns to
20
10 the center with the assistance of the spring.
(3) Detent type (F- and E-types)
20 With this type, the spool comes to a standstill by its
10 notch provided at the third or second position on
this spool.
20 xThe mounting direction of the lever can be
10
changed optionally at every 90° if the direction
20
of the cover on the lever side is changed.
10 cDMA-G**-*7*-10 of the P and T port connection
20
type is based on DMA-G**-*7X-10 of the closed
10 cross type.
20
10 vThe following are the locking bolts furnished for
20 each valve.
10
20
10
20
10 Note: Use the locking bolts with a torque rating
of grade 12.9 or the equivalent.
D-1
04D_DMA Series(P01-02)_E.q 07.6.7 4:47 PM Page 3
Installation Dimensions
DMA-G01-***-E20 DMA-G03-***-E10
Cross-Sectional Drawings
DMA-G01-***-E20 Part name Part name
RO-P12-90
D-2