Professional Documents
Culture Documents
Lab2 Assignment
Lab2 Assignment
Lab2 Assignment
Aims: To use the full custom, MICROWIND2, CAD tools of INSA (National Institute of Applied
Sciences) and to learn the design steps of complex designs.
N
q
Clock
M
qbar
S
data
Figure 1
2. The T-type flip-flop circuit can be constructed from a D-type flip-flop and additional
combination logic. The schematic diagram of the T-type flip-flop is shown in figure
2.
Design Hints:
Use the DRC (Design Rule Check) each time you add a layer to reduce debugging
of layout while producing rule compliant layout.
Design and simulate each unit before constructing the full circuit to reduce design
errors and layout debugging.
In Gate A
load
reset d q
D-FF
Figure 1
clock
toggle
Clk qbar
Gate B
Figure 2
Include in your logbook all schematics, layouts and simulation results. A full discussion
of the design process and conclusions must be included.
(40 marks)