7fbe Toyota

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 8

World Class

Productivity
Toyota has added an array of
features to its popular 3-wheeler.
Now it ranks among the most
productive forklifts in the world today.
At the very heart of these
advancements are the Total AC
Control provided by the
advanced AC Power System and
the Total Comfort offered by
the System of Active Stability (SAS).
Features and equipment
may vary depending on market.
Total
AC Control
The New Toyota 7FBE Three-Wheeler is proud to offer
total AC control of its top-ranked performance.

Full AC Power System*


The state-of-the-art system is the
foundation for many of the enhanced
benefits of the New 7FBE.
Toyota overcame numerous
technical obstacles to realize this
AC Power System, but the result
was well worth the challenge.
The level of performance control it
provides is unlike anything else you
have ever experienced.
Once again, Toyota has set the
standard for all other manufacturers
to follow.

* Power management of the twin


drive motors and the pump
motor for load handling and
power steering is performed by
full AC control.
This AC Power System requires
less maintenance cost than the
current DC system.

Features and equipment


may vary depending on market.
Range

Performance Level
New Model where
100% recharging
is needed

90%
Current Model
Lift
Interrupt

0% 60% 80% 100%


Current model(1.5t)
Efficient operating time: 2h00m Decrease in
(390AH/5HR) performance

New model(1.5t: S mode)


40% Longer
Longer
Efficient operating time: 2h50m
(390AH/5HR)

Note: Does not function in H-mode.

Power Select Function Switch Power Keep Function


The power control offered by the
AC Power System allows the 7FBE
to fully use the potential of each
battery charge. Up until now,
all electric forklifts experienced
a gradual drop in performance as
Power Select Function Indicator
the charge in the battery was used.
Because of this function,
the operator can enjoy that vibrant
"just charged" performance for
40% longer than on the current
model.
Sharp Pivot Turn
High-power mode During sharp turns, the direction
Accelerator
85 H Braking Released Switch Back
of each of the front AC drive
Cycle Time (sec. / cycle)

Power mode Motors reverses, allowing the


P
90 11% Faster
three-wheeler to make pivot turns.
This system makes sure the
Standard mode operator can utilize all the
95 S
Current Model incredible maneuverability offered
Controller Motor Battery by the three-wheel design.
Operating Time

150min. 200min. 250min.

Power Select Function Regenerative System


This function allows the operator When the forklift is coasting,
to set the power mode that best the motors are used as generators
meets the demands of the job. to charge the battery.
The S-Mode places priority on This regenerative system operates
extending the operating time per to help charge the battery when the
charge. The H-Mode is for the accelerator is released, when the
fastest cycle time. In the H-Mode, brake is depressed or during Compact Drive Unit
the 7FBE will deliver an 11% faster switchback. This system also helps The use of a planetary gears and
cycle time than the current model. slow the forklift naturally when the the small size of the AC motor
accelerator is released. Moreover, combine to offer a compact drive
it will also help hold the forklift’s unit. This arrangement also
position when starting on a ramp. efficiently conveys the power that
gives the 7FBE its amazing travel
performance.
Total Comfort
The New 7FBE provides the operator with
the comfort and convenience needed to get
more work done with less effort.

WORLD LEADER
System of Active
Stability(SAS)
The innovative System of Active Stability was developed
exclusively by Toyota. It enhances comfort by helping
the operator maintain stability when handling heavy loads
at high mast heights. It also has features that help the
operator control the forklift with less stress and more
efficiency. The result is a whole new level of comfort.
The first time you operate the 7FBE, you will actually feel
the difference these features offer.

Automatic Fork Active Steering Active Mast


Leveling Control Synchronizer Function Controller
Simply press a button when tilting The Active Steering Synchronizer Tilt speed and angle control are
the empty forks forward and they helps to maintain a consistent assisted by Toyota’s innovative
will automatically stop in a level positional relationship between the SAS when heavy loads are being
position, ready for insertion into steering wheel and the rear steer handled at high mast heights.
a pallet. This feature can help wheel. This feature enhances The stable handling provided by
save a lot of time and frustration maneuverability and also helps to this controller contributes to better
during load handling operations. make the operator’s job easier load handling performance
and more efficient. and less operator stress.
Features and equipment
may vary depending on market.

Other Features
9 deg.

430mm

Low Step Height Adjustable Steering Operator Restraint


The 7FBE has a low step along with Column with Tilt Memory System (ORS) Seat
a convenient assist grip on the front The steering column can be tilted The side wings of the seat team up
pillar of the overhead guard. to the desired driving position. with the emergency locking retractor
The low step height means less Tilt memory means that the steering of the seat belt system to hold the
work for the operator when getting column can be moved out of the operator in the seat.
on the 7FBE. This is especially way during a battery change and The seat can be adjusted to the
important if the operator must get then be returned to its original desired operating position. The seat
on and off the forklift repeatedly. position without any additional will provide both comfort and support
adjustment. for long hours of operation.
MODEL VARIATION
7FBE10 7FBE13 7FBE15 7FBE18 7FBE20

MAIN SPECIFICATIONS
Model 7FBE10 7FBE13 7FBE15 7FBE18 7FBE20

Load Capacity kg 1000 1250 1500 1750 2000

Load Center mm 500 500 500 500 500

Overall Width A mm 1075 1075 1075 1075 1075

Turning Radius (Outside) B mm 1365 1400 1515 1550 1675

Overhead Guard Height C mm 1980 1980 1980 1980 1980

Length to Fork Face D mm 1750 1755 1875 1905 2045

BATTERY AND MOTOR SPECIFICATIONS


Model 7FBE10 7FBE13 7FBE15 7FBE18 7FBE20

STD V/AH 48/280 48/280 48/390 48/390 48/390


Voltage/Capacity
(5-hour ratings)
High V/AH 48/365 48/365 48/565 48/565 48/645

Drive kW x Unit 4.9 x 2 4.9 x 2 4.9 x 2 4.9 x 2 4.9 x 2


Electric Motors
Load
kW 9.2 9.2 9.2 9.2 9.2
Handling

B
D

The data in this brochure is determined based on our standard testing condition.
The performance may vary depending on the actual specification and condition of the vehicle as well as the condition of the operating area.
Availability and specifications depend on region and are subject to change without notice.
Due to photography and printing, color of actual vehicle may vary from this brochure. Some photos have been computer-enhanced.
Please consult your Toyota representative for details.

All rights reserved by Toyota Industries Corporation.

CAT.7FBE10-20/E·0807/ /Printed in Japan/No.711070E0/2,430

You might also like