Professional Documents
Culture Documents
Fichtech 95000Lbcd Eng
Fichtech 95000Lbcd Eng
95000LBCD
95000L BCD is a numerical indicator allowing to display a BCD value composed of 1 to 3 digits 1/2 unsigned
or 1 to 3 digits signed. The personalization of the indicator, number of digits, sign, and input process
configuration, active (voltage level) or passive (dry contact), allow to meet appliance majority. More, a
configurable analogical output adds to indicator an analogical/numerical converter function.
FONCTIONNALITY: SECURITY/FIABILITY:
Inputs: The device has been devised in accordance with the problems
- personalized input at the order: met in industrial environments:
.1 to 3 digits 1/2 unsigned, - galvanic insulation inputs / outputs / power supply,
.1 to 3 digits signed. - saving of configuration parameters in EEPROM,
- configurable input type: holding safety > 10 years,
.active, voltage level, - noise immunity, input analysing,
.passive, dry contact. - watchdog supervising the program process,
- 4 inputs wires per digit, - regeneration of internal parameters at each measure,
- 1 input wire for 1/2 digit,
- 1 input wire for sign, DIALOGUE - CONFIGURATION:
- 1 common ground wire,
The device can interact via the RS232 link with any system
emulating a terminal. Example: HyperTerminal in Windows.
Display:
Free supply on simple request of RS232 cable.
- 7 segments leds display,
Transmission format, 9600 bauds, 1 start bit,
- 3 digits 1/2 high resolution, 2000 pts,
8 data bits, 1 stop bit, parity none.
- signalisation of input error value ,
- most significant digits at zero or non used display zero,
Through terminal, user will be able to:
- last significant digits at zero display zero.
- visualize the measures,
- configurate device:
Outputs:
.input process, input scale,
Device can dispose of an insulated analogical output fully
.output parameter.
configurable:
- output type, current or voltage,
Warning: RS232 link is not insulated from input
- output range, limitation.
measures. Check if there is no dangerous potential on
inputs before any configuration.
Generator:
In option, on 95000L BCD/S version, device disposes of a
SPECIFICS FEATURES:
generator set-point function actionnable on his front side
thanks to 3 push buttons:
95000L BCD: BCD input, up to 3 digits 1/2, sign,
- "Auto / Manu" button allowing to access to generator
active or passive input.
or indicator mode,
95000L BCD/S: BCD input, up to 3 digits 1/2, sign,
- "Up" and "Down" button allowing to adjust set-point.
active or passive input,
configurable analogical output.
Generality:
- satndard power supply 230 Vac, other on request,
- standard numerical outputs RS232-C,
- connection with screw terminal, unstitchable connector
on BCD input,
- slot in box: 96 x 48 x 85
INDICATORS 1
TECHNICAL SPECIFICATIONS
Accuracy at 90 days (20 °C +/- 2 °C)
LOREME 12, rue des Potiers d'Etain - 57071 Metz Cedex 3 03.87.76.32.51 - Fax 03.87.76.32.52 - Email: Commercial@Loreme.fr - Technique@Loreme.fr
2
Because of the evolutions of technologies and standards, LOREME keeps the possibility to modify the specifications of the included products without notice. REV5 - 05/11/02