This document contains a request to submit a list of equipment for vetting that includes:
1) An all geared lathe machine with specifications including a 2 HP motor, spindle bore of 42mm, and longitudinal and transverse feeds per revolution.
2) Accessories for the lathe including a face plate, steady rest, follow rest, electric coolant pump, taper turning attachment, quick change tool post, chuck flange, 10" x 4 jaw dog chuck, revolving centre, 8" x 3 jaw true chuck, and 6 1/2" x 3 jaw true chuck.
3) The total estimated cost for the lathe machine and accessories is Rs. 220000 or approximately $2
This document contains a request to submit a list of equipment for vetting that includes:
1) An all geared lathe machine with specifications including a 2 HP motor, spindle bore of 42mm, and longitudinal and transverse feeds per revolution.
2) Accessories for the lathe including a face plate, steady rest, follow rest, electric coolant pump, taper turning attachment, quick change tool post, chuck flange, 10" x 4 jaw dog chuck, revolving centre, 8" x 3 jaw true chuck, and 6 1/2" x 3 jaw true chuck.
3) The total estimated cost for the lathe machine and accessories is Rs. 220000 or approximately $2
This document contains a request to submit a list of equipment for vetting that includes:
1) An all geared lathe machine with specifications including a 2 HP motor, spindle bore of 42mm, and longitudinal and transverse feeds per revolution.
2) Accessories for the lathe including a face plate, steady rest, follow rest, electric coolant pump, taper turning attachment, quick change tool post, chuck flange, 10" x 4 jaw dog chuck, revolving centre, 8" x 3 jaw true chuck, and 6 1/2" x 3 jaw true chuck.
3) The total estimated cost for the lathe machine and accessories is Rs. 220000 or approximately $2
This document contains a request to submit a list of equipment for vetting that includes:
1) An all geared lathe machine with specifications including a 2 HP motor, spindle bore of 42mm, and longitudinal and transverse feeds per revolution.
2) Accessories for the lathe including a face plate, steady rest, follow rest, electric coolant pump, taper turning attachment, quick change tool post, chuck flange, 10" x 4 jaw dog chuck, revolving centre, 8" x 3 jaw true chuck, and 6 1/2" x 3 jaw true chuck.
3) The total estimated cost for the lathe machine and accessories is Rs. 220000 or approximately $2
Programme : Common for all (First Year) Semester: I & II Course: Workshop Practices Rate S.No. Equipment/Machine Qty. Unit Amount (Approx.) Machine Shop ALL GEARED LATHE MACHINE WITH HARDENDED GUIDEWAYS, HARDENED & PROFILE GROUND HEAD STOCK GEARS . Bed length - 1650 mm, centre height- 175mm, swing over bed - 335mm, swing over cross slide- 175 mm, swing over saddle- 175 mm, distance between centre- 800mm, movement of cross 1 slide- 200mm, bed type 2flat,2V, bed width - 254mm, motor- 2 HP, TYPE & SIZE OF 1 SPINDLE NOSE- A 2 Size 4, Taper bore in centre sleeve: - MT 5, Spindle bore 42 mm, Spindle dia :- 45mm, Taper bore in spindle sleeve :- MT4, LONGITUDINAL FEEDS PER REVOLUTION:: 0.068 TO 1.02mm/REV, TRANSVERSE FEEDS PER REVOLUTION :: 0.012 TO 0.185 mm/REV. With Following Accesories: 1 Face plates suitable to lathe machine Outer dia: 400 mm,Steady rest ,Follow rest ,Electric coolant pump with 1.00 Set 220000.00 220000.00 fittings,Taper turning attachment, Quick change tool post with five tool holders,CHUCK FLANGE A 2/4 SPINDLE MOUNTING,10” X 4 JAW DOG CHUCK , REVOLVING CENTRE , 8” X 3 JAW TRUE CHUCK , 6 1/2 X 3 JAW TRUE CHUCK or similar specification or latest version at the time of purchase.