Professional Documents
Culture Documents
As 7633 (2012) - Railway Infrastructure - Clearances
As 7633 (2012) - Railway Infrastructure - Clearances
As 7633 (2012) - Railway Infrastructure - Clearances
es
nc
AS 7633: 2012
Railway Infrastructure: Clearances
ara
le
w C
ie re:
ev tu
Pr uc
r
st
fra
In
ay
lw
ai
R
ABN 5810-5001-465
Accredited Australian Standards Development Organisation
This Australian Railway Standard AS 7633 Railway Infrastructure – Clearances was prepared by a
es
RISSB Infrastructure Standards Development Group. It was signed off by the RISSB Infrastructure
Standards Development Group and Infrastructure Standing Committee in October 2011 and
subsequently by the Development Advisory Board (DAB) in November 2011. The DAB confirmed that
nc
the process used to develop the standard was in accordance with the RISSB accredited development
process. On the 23rd November 2011 the RISSB Board approved the Standard for release and
publication. This Standard was published on the RISSB website (www.rissb.com.au ) on the 20
ra
January 2012
a
le
w C
Kevin Taylor
General Manager
ie re:
Rail Industry Safety and Standards Board
ev tu
The following organisations were represented on the Infrastructure Standards Development Group:
Pr uc
This Standard was issued on two occasions for open review and was independently validated before
fra
RISSB wish to acknowledge the participation of the expert individuals that contributed to the
In
development of this Standard through their representation on the committees and through the open
review periods.
ay
Australian Standards developed by RISSB may also be withdrawn. It is important that readers assure
ai
themselves they are using a current RISSB Standard, which should include any amendments that
may have been published since the Standard was published.
R
Information about Australian Standards to be developed by RISSB, drafts, amendments, and new
projects can be found by visiting www.rissb.com.au
RISSB welcomes suggestions for improvements, and encourages readers to notify it immediately of
any apparent inaccuracies or ambiguities. Contact us via email at rissb@rissb.com.au or write to
Rail Industry Safety and Standards Board, PO Box 4608, Kingston, ACT. 2604
ABN 5810-5001-465
Accredited Australian Standards Development Organisation
AS 7633: 2012
es
nc
a ra
Australian Standards® developed by RISSB
le
w C
AS 7633: 2012
ie re:
Railway Infrastructure: Clearances
ev tu
Pr uc
r
Copyright
RISSB
ai
All rights are reserved. No part of this work may be replaced or copied in any form or by any
R
Published by Rail Industry Safety and Standards Board (RISSB) ABN: 5810-5001-465
P O Box 4608, Kingston, ACT, Australia 2604
ISBN 978-1-74342-030-0
Australian Infrastructure Standards
AS 7633 Infrastructure - Clearance
2 RISSB and all persons acting for the RISSB in preparing the standard disclaim any SUP N/A
liability or responsibility to any person for any consequences arising directly or indirectly
from the use by the rail industry or organisations of the standard in whole or in part, and
whether or not in conjunction with, or as a supplement to, the standards which the rail
industry already use.
es
3 Users of the standard should be aware that, while using the standard, they must also SUP N/A
comply with any relevant Commonwealth, State or Territory legislation relevant to their
operations.
4 Adherence to the standard does not replace or exclude the application of such SUP N/A
nc
legislative requirements.
5 Users are responsible for making their own enquiries in relation to the application of SUP N/A
legislation, and the framers of the standard accept no responsibility in this regard.
6 Adherence to the standard does not necessarily ensure compliance with any relevant SUP N/A
ra
national standards and codes of practice.
7 Users are responsible for making their own enquiries in relation to compliance with SUP N/A
national standards and codes of practice.
a
8 While all reasonable care has been taken in the preparation of this standard, it is SUP N/A
provided to rail operators without any legal liability on the part of RISSB and RISSB
(publisher, authors, consultants and editors each) takes no responsibility for loss
le
suffered by any person resulting in any way from the use of, or reliance on, this
publication.
9 Responsibility rests with the rail organisation to ensure that all aspects of the standard SUP N/A
w C
are safe.
10 © Rail Industry Safety and Standards Board. SUP N/A
1.2 DOCUMENT CONTROL HED
1.2.1 Identification ie re: HED
1 Document Title: Infrastructure - Clearances SUP N/A
2 Number: AS 7633 SUP N/A
3 Version: 1.0 SUP N/A
4 Date of Issue: February 2012 SUP N/A
ev tu
1.2.2 Preparation and Approval HED
1 Prepared by: Coffey Rail SUP N/A
2 RISSB Approval Date: 22 November 2011 SUP N/A
1.2.3 Distribution and Change HED
Pr uc
1 The current version of this standard is available from the RISSB website at SUP N/A
www.rissb.com.au.
2 RISSB standards are subject to review at a period not exceeding five years from their SUP N/A
date of publication.
r
124
1.2.4 P i
Previous Published
P bli h d Versions
V i HED
st
AS 7633
Standard Page 1 of 5