Professional Documents
Culture Documents
Seminar Report Jitto Tony 23-1-2020
Seminar Report Jitto Tony 23-1-2020
Seminar Report Jitto Tony 23-1-2020
CERTIFICATE
ACKNOWLEDGEMENT
ABSTRACT
1. INTRODUCTION
2. CONCRETE CORE DRILLING TECHNIQUE
3. HOLE ANALYSIS
4. NUMERICAL ANALYSIS
5. CONCRETE CORE TREPANNING
6. NUMERICAL ANALYSIS
7. CONCRETE CORE DRILLING STRAIN GAGE TECHNIQUE
8. HOLE ANALYSIS
9. NUMERICAL ANALYSIS
10.CONCLUSION
LIST OF FIGURES
1.1 INTRODUCTION
Strain gage data logger was used to measure the strain response. Data
logger used was capable of accepting four types of inputs from
quarter,half - bridge strain gage circuits ,including strain gage based
transducers with a measurement resolution of 1 micro strain .
EXPERIMENTAL SET UP
STANDARD CORE DRILLING MACHINE
The applied stress and existing stress obtained from core drilling
strain gage technique using the calibration constants are matching
closely.
CONCLUSION
The developed technique are simple to handle and quite useful for
applied to the in service structures. More over these technique can be
almost classified as a non-destructive technique. Since the structure can
continue to be in service even after testing.
REFERENCES
International journal for emerging science and engineering.
Anna university project