Professional Documents
Culture Documents
Samm0836-Hercules Latest Iso17025 - 2017
Samm0836-Hercules Latest Iso17025 - 2017
This laboratory has demonstrated its technical competence to operate in accordance with MS
ISO/IEC 17025:2017 (ISO/IEC 17025:2017).
Scan this QR Code or visit www.jsm.gov.my/cab-directories for the current scope of accreditation
This laboratory’s fulfillment of the requirements of ISO/IEC 17025 means the laboratory meets
both the technical competence requirements and management system requirements that are
necessary for it to consistently deliver technically valid test results and calibrations. The
management system requirements in ISO/IEC 17025 are written in language relevant to
laboratory operations and operate generally in accordance with the principles of ISO 9001 (see
Joint ISO-ILAC-IAF Communiqué dated April 2017).
Type of Test/
Materials/ Standard Test Methods/
Properties Measured/
Products Tested Equipment/Techniques
Range of Measurement
Elastomeric Type Compression Quality Assurance MS 671 [App B] &
Laminated Elastomeric Test MS 671: 2014
Bearings, Plain Elastomeric (Max. Vertical Load 50,000 kN)
Bearing or Rubber Strips (Max. Horizontal Load 5000 kN) AS 5100: 2004 Part 4 App D2
with / without fasteners & AS 1523
accessories
BS 5400-1983 Section 9.2
Clause 7.2 (b) (i)
BS EN1337-3: 2005
(Annex H: Level 1)
Type of Test/
Materials/ Standard Test Methods/
Properties Measured/
Products Tested Equipment/Techniques
Range of Measurement
Elastomeric Type Compression Stiffness BS 6177:1982 Clause 9.6
Laminated Elastomeric (Max. Vertical Load 50,000 kN)
Bearings, Plain Elastomeric (Max. Horizontal Load 5000 kN) BS EN 1337-3:2005
Bearing or Rubber Strips [Annex H: Level 2]
with / without fasteners &
accessories AASHTO Sec.18 (2003)
(continued) Clause 18.7.4.5.6
Scan this QR Code or visit www.jsm.gov.my/cab-directories for the current scope of accreditation
Type of Test/
Materials/ Standard Test Methods/
Properties Measured/
Products Tested Equipment/Techniques
Range of Measurement
Structural & Mechanical Compression Quality Assurance Test BS 5400:1983 Sec. 9.2
Type (Max. Vertical Load 50,000 kN) Clause 7.2 (b)
Spherical Bearings, (Max. Horizontal Load 5000 kN)
Mechanical Pot Bearings, BS EN 1337-5: 2005 [Annex B]
Knuckle Leaf Bearings or
PTFE Elastomeric Bearings AASHTO Section 18 (2003)
with / without fasteners & Clause 18.7.2.5
Scan this QR Code or visit www.jsm.gov.my/cab-directories for the current scope of accreditation
accessories.
AASHTO Section 18 (2003)
Clause 18.7.2.6
Type of Test/
Materials/ Standard Test Methods/
Properties Measured/
Products Tested Equipment/Techniques
Range of Measurement
Anti-Seismic & Damping Compression Quality Assurance Test BS EN 15129: 2009
Devices (Max. Vertical Load 50,000 kN) Clause 8.2.1.2.7
Shock Transmission Unit - (Max. Horizontal Load 5000 kN)
(STU), Lock Up Device BS EN 15129: 2009
(LUD), Hydraulic Dampers, Clause 8.2.1.2.6
Seismic Bearings (Structural Compression Under Zero
Isolation, e.g. HDRB, LRB Lateral Displacement
Scan this QR Code or visit www.jsm.gov.my/cab-directories for the current scope of accreditation
ISO 4664-1:2005 E
Anti-Vibration Washers Dynamic Vibration Test (Junker Test) DIN 65151, 2002-08
Note:
Signatories: