Professional Documents
Culture Documents
0700P General Industrial
0700P General Industrial
General Industrial
Products
H
Operating information
Supply pressure (max):
Aluminum (E) 0 to 300 psig (0 to 20.7 bar)
Twist Automatic Zinc with gauge (W) 0 to 250 psig (0 to 17.2 bar)
Drain Drain
With internal auto drain [R] 20 to 175 psig (1.14 to 11.9 bar)
With external auto drain [Q] 0 to 250 psig (0 to 17.2 bar)
General Industrial
Operating temperature:
Port Aluminum (E) 40°F to 150°F (4.4°C to 65.6°C)
size Description Part number Zinc with gauge (W) 40°F to 150°F (4.4°C to 65.6°C)
F602-06WJ With internal auto drain [R] 40°F to 125°F (4.4°C to 52°C)
Products
1" 32 oz. metal bowl / auto drain † scfm = Standard cubic feet per minute at 90 psig inlet and 5 psig pressure drop.
Ordering information:
Coalescers
F602 – 06 W J /**
Port Threads Engineering Level
NPT – /** Will be entered at factory
Regulators
G BSPP G
Drains and Options
Port Size Blank Manual twist drain
3/4 inch 06 Q External heavy duty auto drain
1 inch 08 R Internal auto drain
Lubricators
U Semi-auto drain
Bowl
32 oz. Large capacity metal Element
E
without sight gauge
G 5 Micron
16 oz. Metal with sight gauge W
J 40 Micron
Combinations
Most popular.
General Industrial
Primary Pressure - psig
25 50 75 100 150
5 micron element (All) EK602VB 5
Mounting bracket, 3/4" Unit SA200AW57 .3
Products
Mounting bracket, 1" Unit SA200CW57
.2 3
(pair or 2 kits pipe mounted brackets needed)
Deflector, baffle assembly, & retaining rod (E,W) RK602B 2
External auto drain (All) RK602D .1
Flow Characteristics
Internal auto drain (All)
Metal bowl with sight gauge (W) 16 oz.
RK602MD
RKB605WB
1
0
F602-08WJ
1-inch Port
H
0
0 50 100 150 200 250 300 350
Flow - (scfm)
Filters
“Q” Option External Heavy Duty Auto Drain Float 0 20 40 60 80 100 120 140 160
SA602D / SA603D (Inside Bowl)
Flow - (dm /s)
3
n
For heavy duty applications where the filter Connection
Through
is being used to remove large volumes of Bowl
liquid and/or particulate matter from the (1/8" NPSM)
Coalescers
Drain Manual 2.45
(“Q” option) should be used. (1/4" NPTF) Push Button (62)
Drain
OUT
IN
(Outside Bowl)
2.45
(62)
OUT
IN
4.90
Regulators
(124)
4.06 0.84
(103) (21)
4.90
(124)
0.84
4.06
(21)
(103)
Lubricators
11.94
(303)
8.72
(221) 11.10
7.88 (282)
(200)
Combinations
F602 Particulate
Filters – Hi-Flow
Filters – Hi-Flow
• Excellent water removal efficiency
• For heavy duty applications with minimum pressure drop
requirement
• Unique deflector plate that creates swirling of the air stream
ensuring maximum water and dirt separation
• Large filter element surface guarantees low pressure drop
and increased element life
• 40 micron filter element standard, 5 micron available
• Metal bowl with sight gauge standard
• Twist drain as standard, optional auto drain
• Large bowl capacity
• Optional high capacity bowl(s) available
• 1-1/2" port, NPT & BSPP
Operating information
Supply pressure (max):
Aluminum (E) 0 to 300 psig (0 to 20.7 bar)
Zinc with gauge (W) 0 to 250 psig (0 to 17.2 bar)
General Industrial
With internal auto drain [R] 20 to 175 psig (1.14 to 11.9 bar)
Twist Automatic
Drain Drain With external auto drain [Q] 0 to 250 psig (0 to 17.2 bar)
Operating temperature:
Products
Ordering information:
Coalescers
F602 – 12 W J /**
Port Threads Engineering Level
NPT – /** Will be entered at factory
Regulators
G BSPP G
Drains and Options
Port Size Blank Manual twist drain
1-1/2 inch 12 Q External heavy duty auto drain
R Internal auto drain
Lubricators
Most popular.
General Industrial
Float
40 micron element (All) EK602B SA602D / SA603D (Inside Bowl)
5 micron element (All) EK602VB For heavy duty applications where the filter Connection
Through
is being used to remove large volumes of Bowl
RK602C
Products
Deflector, baffle assembly, & retaining rod (All) liquid and/or particulate matter from the (1/8" NPSM)
External auto drain (All) RK602D airstream, the external automatic drain Drain Manual
(“Q” option) should be used. (1/4" NPTF) Push Button
Internal auto drain (All) RK602MD Drain
(Outside Bowl)
Metal bowl with sight gauge (W) 16 oz. RKB605WB
H
2.45
Filters
(62)
4.90
OUT
IN
(124)
2.45
(62)
4.90
OUT
IN
5.19 1.28
(124)
Coalescers
(132) (32.4)
5.19 1.28
(132) (32.4)
12.69 Regulators
(322)
9.46 11.41
(240) (290)
8.18
(208)
Lubricators
Operating information
Supply pressure (max):
Aluminum (E) 0 to 300 psig (0 to 20.7 bar)
Zinc with gauge (W) 0 to 250 psig (0 to 17.2 bar)
General Industrial
Twist Automatic
Drain Drain With internal auto drain [R] 20 to 175 psig (1.14 to 11.9 bar)
With external auto drain [Q] 0 to 250 psig (0 to 17.2 bar)
Operating temperature:
Products
Ordering information:
Coalescers
F602 – 16 W J /**
Port Threads Engineering Level
NPT – /** Will be entered at factory
Regulators
G BSPP G
Drains and Options
Port Size Blank Manual twist drain
2 inch 16 Q External heavy duty auto drain
R Internal auto drain
Lubricators
Most popular.
.1
Aluminum bowl (E) 32 oz. BK603B 1 Flow Characteristics
F602-16
Zinc bowl with sight gauge (W) 16 oz. BK605WB 2-inch Port
General Industrial
Float
40 micron element (All) EK602G SA602D / SA603D (Inside Bowl)
Deflector, baffle assembly, & retaining rod (All) RK602C For heavy duty applications where the filter Connection
Through
External auto drain (All) RK602D is being used to remove large volumes of Bowl
Products
liquid and/or particulate matter from the (1/8" NPSM)
Internal auto drain (All) RK602MD airstream, the external automatic drain Drain Manual
Metal bowl with sight gauge (W) 16 oz. RKB605WB (“Q” option) should be used. (1/4" NPTF) Push Button
Drain
(Outside Bowl)
2.45
(62)
H
4.90
(124)
Filters
2.45
(62)
4.90
(124)
6.30 1.92
(160) (48.7)
Coalescers
6.30 1.92
(160) (48.7)
11.08
(281)
13.00 Regulators
(330)
11.08
(281)
13.00
(330)
Lubricators
Auto Drain
Operating information
Supply pressure (max):
With pressure gauge
without DPI* 250 psig (17.2 bar)
General Industrial
1-1/2" Metal bowl / auto drain 35F77BAP High flow 1-1/2" 1280 scfm (604.1 dm3/s, ANR)
2" 1400 scfm (660.7 dm3/s, ANR)
2" Metal bowl / auto drain 35F87BAP 3" 2900 scfm (1368.6 dm3/s, ANR)
3" Metal bowl / auto drain 43FN7BAP Bowl capacity: 35F 13.9 oz.
43F 17.2 oz.
H Standard Filtration:
Weight: 35F
5 micron
19.3 lb (8.7 kg)
43F 32.8 lb (14.9 kg)
† scfm = Standard cubic feet per minute at 90 psig inlet and 5 psig pressure drop.
Filters
* Without differential pressure indicator, max supply pressure is 250 psig (17.2 bar).
Ordering information:
Coalescers
35F 7 7 B A P
Port Size Port Threads
1-1/2 inch (35F) 7 Blank NPT
Regulators
Most popular.
bar
psid
Inlet Pressure
Deflector Plated steel psig 15 35 60 90 100 120 150
bar 1.0 2.4 4.1 6.2 7.0 8.2 10.3
5
Element retainer Plated steel
Filter element Polyethylene 0.3
4
Seals Fluorocarbon
Pressure Drop
Stud Plated steel 0.2
3
0.1
Differential pressure indicator cap 1
For pressures over 150 psig GRP-95-022
Differential pressure gauge DP3-01-000 0 0
0 200 400 600 800 1000 1200 scfm
Differential pressure indicator DP2-02-001
3
Auto drain, 1/8 NPT GRP-95-981 0 100 200 300
Air Flow Rate
400 500 dm /s
n
bar
psid
psig 15 35 60 90 100 120 150
General Industrial
bar 1.0 2.4 4.1 6.2 7.0 8.2 10.3
5
Products
7.80 3.88
Pressure Drop
2.83
(198) (72) (98.6) 3
0.2
0.1
1
19.07 0 0
H
0 200 400 600 800 1000 1200 1400 scfm
(484)
16.24 3
0 100 200 300 400 500 600 dm /s
(412.5) n
Filters
Air Flow Rate
Coalescers
(14)
bar
psid
Inlet Pressure
43F Particulate Filter 8.88 psig
bar
15
1.0
35
2.4
60
4.1
90 100 120
6.2 7.0 8.2
150
10.3
(225.5) 5
8.94 4.44
(227) (112.8) 0.3
4
3.48
Pressure Drop
(88) 3
Regulators
0.2
0.1
1
29.44
(748)
0 0
25.96 0 500 1000 1500 2000 2500
Lubricators
scfm
(659.4)
3
0 200 400 600 800 1000 1200 dm /s
n
Air Flow Rate
Combinations
.55
Inches (mm) (14)
Operating information
Supply pressure (max):
With pressure gauge
Auto Drain without DPI* 250 psig (17.2 bar)
with DPI 150 psig (10.3 bar)
General Industrial
H 3"
3"
0.01 micron / auto float
1.0 micron / auto float
43FN7EAP
43FN7HAP
Weight: 35F
43F
19.3 lb (8.7 kg)
32.8 lb (14.9 kg)
† scfm = Standard cubic feet per minute at 90 psig inlet and 5 psig pressure drop.
* Filtration temperature of 70°F (21°C) @ 100 psig (6.9 bar) with typical compressor
lubricating oil and protected by 0.01 micron filter.
Filters
Ordering information:
Coalescers
35F 7 7 H A P
Port Size Port Threads
1-1/2 inch (35F) 7 Blank NPT
Regulators
Bowl Options
Metal without sight gauge, N Without differential pressure indicator
7
auto float drain
Lubricators
Most popular.
bar
psid
Inlet Pressure
psig 15 35 60 90 100 120 150
Seals Fluorocarbon bar 1.0 2.4 4.1 6.2 7.0 8.2 10.3
5
Stud Plated steel
0.3
4
Pressure Drop
Repair and Service Kits
Differential pressure indicator cap – 0.2
3
for pressures over 150 psig GRP-95-022
Differential pressure indicator DP2-02-001 2
General Industrial
bar
psid
Inlet Pressure
7.80 2.83 3.88 psig 15 35 60 90 100 120 150
(198) (98.6) bar
(72) 5
1.0 2.4 4.1 6.2 7.0 8.2 10.3
Products
0.3
4
Pressure Drop
3
0.2
19.07
(484) 2
16.24
(412.5)
0.1
1
H
0 0
Filters
0 200 400 600 800 1000
Flow - (scfm)
0 100 200 300 400
.55 Flow - (dm /s)
3
(14) n
Coalescers
(225.5)
8.94 4.44
(227)
3.48 43FN7HAP
(88) (112.8)
bar
psid
Inlet Pressure
psig 15 35 60 90 100 120 150
bar 1.0 2.4 4.1 6.2 7.0 8.2 10.3
5
Regulators
0.3
Pressure Drop
3
29.44 0.2
(748)
2
25.96
0.1
Lubricators
(659.4)
1
0 0
0 500 1000 1500 2000 2500
Flow - (scfm)
3
Flow - (dm /s)
n
.55
Inches (mm) (14)
Operating information
Supply pressure (max):
Manual drains 0 to 300 psig (0 to 20.7 bar)
Auto drains
“R” low pressure internal 175 psig (12.0 bar)
Port “T” High pressure internal 250 psig (17.2 bar)
size Description Part number “Q” external 250 psig (17.2 bar)
3/4" 32 oz. metal bowl, grade 6 element F701-06E3P Operating pressure drop:
General Industrial
* Dry media flow, for wet media flow information see table on next page.
Ordering information:
Coalescers
F701 – 06 W 3 /**
Port Threads Engineering Level
NPT – /** Will be entered at factory
Regulators
G BSPP G
Drains and Options
Port Size Blank Manual twist drain
3/4 inch 06 T High pressure internal auto drain
1 inch 08 Q* External auto drain
R Low pressure internal auto drain
Lubricators
Most popular.
20
Repair and Service Kits
10
Bracket - 3/4 (pair of pipe mounted brackets) SA200AW57
0
Bracket - 1 (pair of pipe mounted brackets) SA200CW57 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170
Flow - (scfm)
32 oz bowl kit - 3/4, 1 inch (E) BK603B
32 oz bowl kit - 3/4, 1 inch (L) 100 oz. BK603C 0 10 20 30 40 50 60 70 80
3
Flow - (dm /s)
Differential pressure pop up Indicator repair kit RK701P n
(only works with originally equipped units)
DP276-P Media Specifications
General Industrial
Differential pressure gauge
(only works on units without pop-up indicator)
Internal automatic drain kit, high pressure (T) SA702MD G
D.O.P.
Pressure drop (PSID)2 @
r rated flow
SA600Y7-1 Coalescing efficiency Maximum oil
Products
Manual twist drain kit a
d 0.3 to 0.6 micron carryover1 Media Wet with
Grade 6 element - 3/4, 1 Inch (E) 32 oz. F701-C3-0773 e particles PPM w/w Media dry 10-20 wt. oil
Grade 6 element - 3/4, 1 Inch (L) 100 oz. F701-C3-0774 6 99.97% 0.008 1.0 2-3
Grade 10 element - 3/4, 1 Inch (E) 32 oz. F701-C7-0773 10 95% 0.85 0.5 0.5
Grade 10 element - 3/4, 1 Inch (L) 100 oz. F701-C7-0774 1 Testedper BCAS 860900 at 40 ppm inlet.
( ) = Bowl Type
2 Add dry + wet for total pressure drop.
D.O.P. = Dioctylphthalate H
F701 - 32 oz. bowl (Hi-Flow) F701 - 100 oz. bowl (Hi-Flow)
Filters
4.00 4.00
(101) (101)
Coalescers
4.95
4.95
B
A
(126)
B
A
(126)
1.23
1.23
(31)
(31)
Regulators
13.00
(330) 22.63
(575)
Lubricators
11.77
(299) 21.39
(5.43)
Combinations
Inches (mm)
Material Specifications
Body Steel
H Baffle Plated steel Repair and Service Kits
Deflector Plated steel DP gauge replacement kit DPG-Kit
Element Borosilicate cloth Float drain kit - 1/2" NPT HDF-120-NPT-A
Filters
Most popular.
23.75
(603)
21.13
(537)
13.00 14.38
(330) (365)
55.88 56.63
(1419) (1438)
42.88 42.25
(1089) (1073)
Float Drain Kit
(Shipped loose)
4.25
General Industrial
(108)
Products
P3TFAFFD2AN & P3TFAFFQ2AN P3TFAFGD3AN & P3TFAFGQ3AN
Filters
Coalescers
Regulators
Lubricators
Combinations
Operating information
Supply pressure (max): 300 psig (0 to 20.7 bar)
Reduced pressure range: 2 to 125 psig (0.15 to 8.5 bar)
General Industrial
Ordering information:
R119 – 02 C /**
Coalescers
Most popular.
20
1
2" dial face 60 psig (0 to 4.1 bar), gauge K4520N14060
0 0
K4520N14160
0 20 40 60 80 100 120
2" dial face 160 psig (0 to 11.0 bar), gauge Rated Flow - (scfm)
n
1-3/4" digital round face
160 psig (0 to 11.0 bar), gauge K4517N14160D R119 3/8" Regulator Flow Characteristics
R119-03C
Mounting bracket, 1/4", 3/8" SA15Y57 100
6 3/8 Inch Ports
Mounting bracket, 1/2" 18A57 100 psig (6.9 bar)
1
Relieving diaphragm, valve assembly
(1/4", 3/8"; all psig) RK119Y 0 0
0 25 50 75 100 125 150
Rated Flow - (scfm)
General Industrial
Non-Relieving diaphragm, valve assembly 0 10 20 30 40 50 60 70
Products
(1/2"; 25, 60, 125 psig) R119-04C
100
1/2 Inch Ports
Relieving diaphragm, valve assembly 6
100 PSIG (6.9 bar)
Secondary Pressure - (psig)
Secondary Pressure - (bar)
1
25 H
CAUTION: 0 0
REGULATOR PRESSURE ADJUSTMENT – The working range of knob
0 25 50 75 100 125 150 175 200
Rated Flow - (scfm)
adjustment is designed to permit outlet pressures within their full range.
Filters
0 10 20 30 40 50 60 70 80 90
Pressure adjustment beyond this range is also possible because the knob Flow - (dm /s)
3
n
is not a limiting device. This is a common characteristic of most industrial
regulators, and limiting devices may be obtained only by special design. For
best performance, regulated pressure should always be set by increasing
the pressure up to the desired setting.
! WARNING
Product rupture can cause serious injury.
Coalescers
Do not connect regulator to bottled gas.
Do not exceed Maximum primary pressure rating.
IN OUT
R119-02C, R119-04C
R119-03C
X80 Reverse Flow 3.56
Option (90)
3.00 Regulators
(76)
Inches (mm)
.625 Dia.
15.8 Ø
.625 Dia. 5.34
Lubricators
15.8 Ø (136)
5.29
(134)
1.45 6.90
0.90 6.67 (37) (175)
(24) (169)
Combinations
1.38 1.56
(35) (40)
Panel Mount 2.74 1/4" Gauge Ports (2) 3.25 1/4" Gauge Ports (2)
Version (70.5) (83)
Operating information
Supply pressure (max): 300 psig (0 to 20.7 bar)
Reduced pressure range: 2 to 125 psig (0.15 to 8.5 bar)
Operating temperature: 40°F to 125°F (4.4°C to 52°C)
Port Description Flow capacity†:
General Industrial
size (0-125 psig reduced pressure) Part number High flow 3/4" 300 scfm (141.6 dm3/s, ANR)
3/4" Without gauge, relieving, NPT R119-06C 1" 400 scfm (188.8 dm3/s, ANR)
1-1/2" 500 scfm (236 dm3/s, ANR)
Products
3/4" With gauge, relieving, NPT R119-06CG Gauge ports (2): 1/4 inch
1" Without gauge, relieving, NPT R119-08C Weight: 3/4" 6.2 lb (2.81 kg)
1" With gauge, relieving, NPT R119-08CG 1" 6.2 lb (2.81 kg)
1-1/2" 7.2 lb (3.27 kg)
1-1/2" Without gauge, relieving, NPT R119-12C † scfm = Standard cubic feet per minute at 100 psig inlet, 75 psig no flow secondary
H 1-1/2" With gauge, relieving, NPT R119-12CG setting and 20 psig pressure drop.
Filters
Ordering information:
R119 – 06 C /**
Coalescers
Most popular.
50
3
50
Relieving diaphragm, valve assembly (1-1/2") RK119D 3
2
For Fluorocarbon Repair Kits, add X64 to kit number suffix. 25
1
General Industrial
0
0 50 100 150 200 250 300 350 400
Rated Flow - (scfm)
! WARNING 0 20 40 60 80 100 120 140 160 180
3
Flow - (dm /s)
Product rupture can cause serious injury. n
Products
Do not connect regulator to bottled gas.
1-1/2" Regulator
Do not exceed Maximum primary pressure rating. Flow Characteristics
R119-12C
100
6 1-1/2 Inch Ports
5
Primary Pressure
75
REGULATOR PRESSURE ADJUSTMENT – The working range of knob
H
4
adjustment is designed to permit outlet pressures within their full range.
50
Pressure adjustment beyond this range is also possible because the knob 3
Filters
0 0
0 100 200 300 400 500
Rated Flow - (scfm)
0 40 80 120 160 200 240
3
Flow - (dm /s)
n
IN OUT
R119-06C, R119-12C
Coalescers
R119-08C
Regulators
8.53
8.15 1/4" NPT (217)
1/4" NPT
(207)
Lubricators
1.87 1.81
(47) (46)
Combinations
4.38 4.94
(111) (125)
Inches (mm)
† scfm = Standard cubic feet per minute at 100 psig inlet, 75 psig no flow secondary
setting and 20 psig pressure drop.
Ordering information:
R119 – 02 J /**
Coalescers
Options
Port Size Blank None
1/4 inch 02 K Non-relieving
3/8 inch 03 X64* Fluorocarbon o-rings and diaphragm
1/2 inch 04 X71 Non-bleed (for use with electronic controllers)
X7 Brass bottom plug
Lubricators
Reduced Pressure Range * Brass bottom plug standard with X64 option.
Air pilot operated J
Combinations
Most popular.
4
2" dial face 60 psig (0 to 4.1 bar), gauge K4520N14060
50
2" dial face 160 psig (0 to 11.0 bar), gauge K4520N14160 3
General Industrial
4
R119-02J, R119-03J 3
50
Products
2
25
3.00 1
(76)
0 0
0 25 50 75 100 125 150
Rated Flow - (scfm)
0 10 20 30
Flow - (dm /s)
n
40
3
50 60 70
H
1.98
1.57
(40)
(50) R119 1/2" Regulator
3.55
Filters
(90) Flow Characteristics
1.38 R119-04J
100
(35)
6 1/2 Inch Ports
100 psig (6.9 bar)
Secondary Pressure - (psig)
Secondary Pressure - (bar)
Coalescers
4
R119-04J 3
50
2
25
3.56 1
(90)
0 0
0 25 50 75 100 125 150 175 200 Regulators
Rated Flow - (scfm)
0 10 20 30 40 50 60 70 80 90
3
Flow - (dm /s)
n
2.33
Lubricators
1.91 (59)
(49) 3.90
(99)
! WARNING
1.56
(40)
Product rupture can cause serious injury.
Do not connect regulator to bottled gas.
Do not exceed Maximum primary pressure rating.
Combinations
3.25
(83) 1/4" Gauge Ports (2)
nches (mm)
size (0-125 psig reduced pressure) Part number High flow 3/4" 300 scfm (141.6 dm3/s, ANR)
1" 300 scfm (141.6 dm3/s, ANR)
3/4" Without gauge, relieving, NPT R119-06J
1-1/2" 500 scfm (236 dm3/s, ANR)
1" Without gauge, relieving, NPT R119-08J Gauge ports (2): 1/4 inch
1-1/2" Without gauge, relieving, NPT R119-12J Weight: 3/4" 5.2 lb (2.36 kg)
H 1"
1-1/2"
5.2 lb (2.36 kg)
5.6 lb (2.54 kg)
† scfm = Standard cubic feet per minute at 100 psig inlet, 75 psig no flow secondary
setting and 20 psig pressure drop.
Filters
Ordering information:
R119 – 06 J /**
Coalescers
Options
Port Size Blank None
3/4 inch 06 K Non-relieving
1 inch 08 X64* Fluorocarbon o-rings and diaphragm
1-1/2 inch 12 X71 Non-bleed (for use with electronic controllers)
X80 Reverse flow
Lubricators
Reduced Pressure Range * Brass bottom plug standard with X64 option.
Air pilot operated J
Combinations
Most popular.
General Industrial
R119-06J, R119-08J 4
50
3
Products
2
4.72 25
(120) 1
0 0
0 50 100 150 200 250 300 350 400
Rated Flow - (scfm)
2.94
(75)
0 20 40 60 80 100
Flow - (dm /s)
n
3
120 140 160 180
H
4.81
(122)
1.87
R119 1-1/2" Regulator
Filters
(47) Flow Characteristics
R119-12J
100
4.38 1/4" NPT 6 1-1/2 Inch Ports
Gauge Ports 100 psig (6.9 bar)
Secondary Pressure - (psig)
(111)
Secondary Pressure - (bar)
Coalescers
4
R119-12J 50
3
2
25
1
4.94
(125)
Regulators
0 0
0 100 200 300 400 500
Rated Flow - (scfm)
0 40 80 120 160 200 240
3
Flow - (dm /s)
n
3.32
Lubricators
(84)
5.13
(130) ! WARNING
1.81
(46) Product rupture can cause serious injury.
Do not connect regulator to bottled gas.
Do not exceed Maximum primary pressure rating.
1/4" NPT
Combinations
4.94
(125) Gauge Ports
(2)
Inches (mm)
Operating information
Supply pressure (max): 300 psig (0 to 20.7 bar)
Air consumption:
Constant bleed from Air pilot chamber: approx.
0.17 scfm (10 scfh)
Reduced pressure: approx.
0.17 scfm (10 scfh)
General Industrial
pressure
2-1/2" Without gauge, relieving, NPT R119-20J Flow capacity†:
High flow 2" 1800 scfm (850 dm3/s, ANR)
2-1/2" 1800 scfm (850 dm3/s, ANR)
Gauge ports (2):
Ordering information:
R119 – 16 J
Coalescers
Port Size
2 inch 16
2-1/2 inch 20
NOTE: Non-relieving not available.
Lubricators
Combinations
Most popular.
50
2" dial face 160 psig (0 to 11.0 bar), gauge K4520N14160 3
R119-16J, R119-20J
7.31
(185)
! WARNING
General Industrial
Product rupture can cause serious injury.
Do not connect regulator to bottled gas.
Do not exceed Maximum primary pressure rating.
Products
6.63
(168)
H
7.78
(198)
Filters
10.87
(276)
3.09
(79)
Coalescers
1/4" NPT
Gauge Ports
(2)
Inches (mm)
Regulators
Lubricators
Combinations
H † scfm = Standard cubic feet per minute at 100 psig inlet, 90 psig no flow
secondary setting and 10 psig pressure drop.
Filters
Ordering information:
09R 8 13 B A
Coalescers
Most popular.
4 60
General Industrial
Do not exceed Maximum primary pressure rating.
5.30
(135)
Products
CAUTION:
REGULATOR PRESSURE ADJUSTMENT – The working range of knob
3.60 adjustment is designed to permit outlet pressures within their full range.
(91) Pressure adjustment beyond this range is also possible because the knob
is not a limiting device. This is a common characteristic of most industrial
regulators, and limiting devices may be obtained only by special design. For
best performance, regulated pressure should always be set by increasing
the pressure up to the desired setting.
H
Filters
1/4" NPT
Gauge Ports 9.10
(2) (91)
11.90
Coalescers
(302)
2.80
(71)
Regulators
Inches (mm)
Lubricators
Combinations
Operating information
Supply pressure (max):
Aluminum (E) 300 psig (20.7 bar)
Aluminum with gauge (G) 150 psig (10.2 bar)
Zinc with gauge (W) 250 psig (17.2 bar)
Port
size Description Part number Operating temperature:
Aluminum (E) 40°F to 150°F (4.4°C to 65.6°C)
3/4" 16 oz. bowl with sight gauge, drain L606-06W
General Industrial
( ) Bowl type.
Filters
Ordering information:
L606 – 06 W /**
Coalescers
Most popular.
Button head fill fitting (M14 male thread) L606C14 Flow - (scfm)
DTK606
0 20 40 60 80 100 120 140 160 180 200
Dip tube kit Flow - (dm /s)
3
n
Drip spout kit RK606SY
Mounting bracket, 3/4 Inch (2 required per unit) SA200AW57 L606 1" Lubricator Primary Pressure - bar
Mounting bracket, 1 Inch units (2 required per unit) SA200CW57 1.7 3.4 5.2 6.9 10.3
Primary Pressure - psig
Needle valve assembly (All) RK606Y 25 50 75 100 150
5
Sight gauge bowl repair kit (W) RKB605WB
.3
Sight gauge bowl repair kit (G) RKB606X30B 4
General Industrial
Oil (1 quart) F442001 3
Oil (1 gallon) F442002 .2
Products
Oil (4 gallon case) F442005 .1
1 Flow Characteristics
F606-08W
1-inch Port
0 0
0 50 100 150 200 250 300 350 400 450
Flow - (scfm)
H
0 20 40 60 80 100 120 140 160 180 200
3
Flow - (dm /s)
n
Filters
(63.1)
2.50
9 0
1
2
8
3
7
6
5 4
0
(64)
9 1
2
8
2.48
3
7
6 4
5
9 0
(63.1)
1
2
8
3
7
6 4
5
Coalescers
4.97
(126)
4.06 5.00
(103) (127)
76 5 4 3 4.06
4.97 32 1 0 9
2.63 (103)
(126) 76 5 4 3
4.06 (66.7) 32 1 0 9
Regulators
(103) 2.63
76 5 4 3 32 1 0 9
(66.7)
2.63
(66.7)
13.38
(340) 12.02
(305)
9.88 10.75 9.40
Lubricators
Add 9/16"
“W” 16 oz size bowl “E” 32 oz size bowl “G” 64 oz size bowl for X9 Option
Inches (mm)
Operating information
Supply pressure (max):
Aluminum (E) 300 psig (20.7 bar)
Aluminum with gauge (G) 150 psig (10.2 bar)
Zinc with gauge (W) 250 psig (17.2 bar)
Port
size Description Part number Operating temperature:
Aluminum (E) 40°F to 150°F (4.4°C to 65.6°C)
1-1/2" 16 oz. bowl with sight gauge, drain L606-12W Aluminum with gauge (G) 40°F to 125°F (4.4°C to 52°C)
General Industrial
Bowl capacity:
Aluminum (E) 32 oz.
Aluminum with gauge (G) 64 oz.
Zinc with gauge (W) 16 oz.
Weight: 16 oz 7.5 lb (3.40 kg)
H 32 oz
64 oz
8.3 lb (3.76 kg)
10.0 lb (4.54 kg)
† scfm = Standard cubic feet per minute at 100 psig inlet and 5 psig pressure drop.
( ) Bowl type.
Filters
Ordering information:
L606 – 12 W /**
Coalescers
Most popular.
General Industrial
Oil (12 quart case) F442003
Oil (4 gallon case) F442005
Products
L606 - 1-1/2"
2.48
(63.1)
H
2.50
9 0
1
2
8
3
7
6
5 4
0
(64)
9 1
2
8
3
7
2.48
4
Filters
5
9 0
1
(63.1)
2
8
7.63
3
7
6 4
5
(194)
4.81 5.00
(122) (127)
76 5 4 3 32 1 0 9 4.81
Coalescers
7.63 (122)
(194) 2.84 76 5 4 3 32 1 0 9
4.81 (72.2)
(122) 2.84
76 5 4 3 32 1 0 9 (72.2)
2.84 13.97
(72.2) (255)
Add 9/16"
for X9 Option
“W” 16 oz size bowl “E” 32 oz size bowl “G” 64 oz size bowl
Combinations
Inches (mm)
Port
size Description
Part
number
Operating information
2" Metal bowl, sight gauge, 1 quart 09L84BA Supply pressure (max): 150 psig (10.3 bar)
Operating temperature: 32°F to 150°F (0°C to 66°C)
2" Metal bowl, sight gauge, 3 quart 09L8PBA
Flow capacity†:
High flow 2" 1000 scfm (472 dm3/s, ANR)
General Industrial
H Ordering information:
09L 8 4 B A
Filters
Most popular.
7.12
(181)
General Industrial
6.00
(152)
Products
5.50 5.50
(140) (140)
H
2.64 2.64
(67) (67)
Filters
PRESS
13.04 12.08
(307)
TURN
(331) 9.44
10.40
(264) (240)
Coalescers
Inches (mm)
1 Quart 3 Quart Regulators
Lubricators
Combinations
Ordering information:
C628 – 06 FRL W J C W
Products
Q
Non-relieving regulator
External heavy duty
Filter Bowl Options auto drain (filter)
32 oz. large capacity w/o sight gauge E R Internal auto drain (filter)
Lubricator Body Options
Filters
A D F
7 6 5 4 3 3 2 1 0 9
A B C D E F
C C628-06FRL, C628-08FRL
15.75 7.75 2.63 3.52 13.00 2.48
Regulators
CAUTION:
! WARNING REGULATOR PRESSURE ADJUSTMENT –
Product rupture can cause serious injury. The working range of knob adjustment is designed to permit outlet pressures
Do not connect regulator to bottled gas. within their full range. Pressure adjustment beyond this range is also possible
Combinations
Do not exceed maximum primary pressure rating. because the knob is not a limiting device. This is a common characteristic of most
industrial regulators, and limiting devices may be obtained only by special design.
For best performance, regulated pressure should always be set by increasing the
Most popular. pressure up to the desired setting.
1. GENERAL INSTRUCTIONS
1.1. Scope: This safety guide is designed to cover general guidelines on the installation, use, and maintenance of Pneumatic Division
Valves, FRLs (Filters, Pressure Regulators, and Lubricators), Vacuum products and related accessory components.
1.2. Fail-Safe: Valves, FRLs, Vacuum products and their related components can and do fail without warning for many reasons. Design all
systems and equipment in a fail-safe mode, so that failure of associated valves, FRLs or Vacuum products will not endanger persons
or property.
1.3 Relevant International Standards: For a good guide to the application of a broad spectrum of pneumatic fluid power devices see:
ISO 4414:1998, Pneumatic Fluid Power – General Rules Relating to Systems. See www.iso.org for ordering information.
1.4. Distribution: Provide a copy of this safety guide to each person that is responsible for selection, installation, or use of Valves, FRLs
Part Number
or Vacuum products. Do not select, or use Parker valves, FRLs or vacuum products without thoroughly reading and understanding this
safety guide as well as the specific Parker publications for the products considered or selected.
Index
1.5. User Responsibility: Due to the wide variety of operating conditions and applications for valves, FRLs, and vacuum products Parker
and its distributors do not represent or warrant that any particular valve, FRL or vacuum product is suitable for any specific end use
system. This safety guide does not analyze all technical parameters that must be considered in selecting a product. The user, through
its own analysis and testing, is solely responsible for:
• Making the final selection of the appropriate valve, FRL, Vacuum component, or accessory.
Safety Guide
• Assuring that all user’s performance, endurance, maintenance, safety, and warning requirements are met and that the application
presents no health or safety hazards.
• Complying with all existing warning labels and / or providing all appropriate health and safety warnings on the equipment on which
the valves, FRLs or Vacuum products are used; and,
• Assuring compliance with all applicable government and industry standards.
1.6. Safety Devices: Safety devices should not be removed, or defeated.
1.7. Warning Labels: Warning labels should not be removed, painted over or otherwise obscured.
Offer of Sale
1.8. Additional Questions: Call the appropriate Parker technical service department if you have any questions or require any additional
information. See the Parker publication for the product being considered or used, or call 1-800-CPARKER, or go to www.parker.com,
for telephone numbers of the appropriate technical service department.
2. PRODUCT SELECTION INSTRUCTIONS
2.1. Flow Rate: The flow rate requirements of a system are frequently the primary consideration when designing any pneumatic system.
System components need to be able to provide adequate flow and pressure for the desired application.
2.2. Pressure Rating: Never exceed the rated pressure of a product. Consult product labeling, Pneumatic Division catalogs or the
Safety Guide, Offer of Sale
Part Number
components:
Index
• Air leakage: Look and listen to see if there are any signs of visual damage to any of the components in the system. Leakage is an
indication of worn or damaged components.
• Damaged or degraded components: Look to see if there are any visible signs of wear or component degradation.
• Kinked, crushed, or damaged hoses. Kinked hoses can result in restricted air flow and lead to unpredictable system behavior.
• Any observed improper system or component function: Immediately shut down the system and correct malfunction.
• Excessive dirt build-up: Dirt and clutter can mask potentially hazardous situations.
Safety Guide
Caution: Leak detection solutions should be rinsed off after use.
4.5. Routine Maintenance Issues:
• Remove excessive dirt, grime and clutter from work areas.
• Make sure all required guards and shields are in place.
4.6. Functional Test: Before initiating automatic operation, operate the system manually to make sure all required functions operate
properly and safely.
Offer of Sale
4.7. Service or Replacement Intervals: It is the user’s responsibility to establish appropriate service intervals. Valves, FRLs and vacuum
products contain components that age, harden, wear, and otherwise deteriorate over time. Environmental conditions can significantly
accelerate this process. Valves, FRLs and vacuum components need to be serviced or replaced on routine intervals. Service intervals
need to be established based on:
• Previous performance experiences.
• Government and / or industrial standards.
• When failures could result in unacceptable down time, equipment damage or personal injury risk.
05/17