Professional Documents
Culture Documents
08 Counterbalance Valve Mini Catalog
08 Counterbalance Valve Mini Catalog
08 Counterbalance Valve Mini Catalog
Counterbalance
Valves
MODEL DESCRIPTION FLOW CAVITY PAGE NO.
C1 C2
DCBS-08 DUAL COUNTERBALANCE, FREE REV. w/SEALS 10 GPM C0825 8-081.0
DCBS-10 20 GPM C1025 8-082.0
V1 DCBS-12 35 GPM C1225 8-083.0
V2
C1 C2
DCBG-08 DUAL COUNTERBALANCE, FREE REV. VENTED 10 GPM C0825 8-101.0
DCBG-10 20 GPM C1025 8-102.0
V V DCBG-12 35 GPM C1225 8-103.0
V1 V2
Reference: 520-P-080000-EN-00/09.2015
CBPA-08
1
COUNTERBALANCE VALVE
3
POPPET TYPE WITH FREE REVERSE FLOW 2
TORQUE:
Steel = 35/40 Ft-Lb. [47/54 Nm]
Aluminum = 25/30 Ft-Lb. [34/41 Nm]
1.00"
[25,4]
HEX
1.62"
[41,1]
MAX
2.50"
[63,5]
3
1.63"
[41,4]
2
1
2.25"
[57,2]
CBPA-08-X-X-X-XX
L/M (28,5 cSt)
PRESSURE RANGE
SIZE 15 = 100 TO 1500 PSI 400 27,6
08 = 3/4"-16 UNF 30 = 300 TO 3000 PSI
PRESSURE DROP (
Reference: 520-P-080510-EN-00/09.2015
CBPA-08
COUNTERBALANCE VALVE
POPPET TYPE WITH FREE REVERSE FLOW.
DESCRIPTION
This unit is a DIRECT ACTING, SCREW IN CARTRIDGE STYLE,
POPPET TYPE, ADJUSTABLE, PILOT ASSISTED, HYDRAULIC
COUNTERBALANCE VALVE.
OPERATIONS
This valve controls moving load and preventing it from running ahead
of the pump, locking the load in any position, it also provides static
overload and thermal expansion protection.
This valve is a MODULATING DEVICE that allows free flow from port 2
to port 1 and then blocks reverse flow until a pilot pressure INVERSELY
PROPORTIONAL to the load pressure is sensed at port 3 modulating
flow from port 1 to port 2.
Reference: 520-P-080510-EN-00/09.2015
CBPA-08
COUNTERBALANCE VALVE
POPPET TYPE WITH FREE REVERSE FLOW.
SPECIFICATIONS
OPERATING PRESSURE: 5,000 PSI [350 Bar]
PROOF PRESSURE: 10,000 PSI [700 Bar]
FLOW: 10.0 GPM [38 L/M] nominal. See performance chart.
PILOT RATIO: 4 to 1
INTERNAL LEAKAGE: 5 drops/min @ 90% of crack pressure.^J
DEFINITION OF CRACK: evident at 0.06 GPM [0.25 LPM]
VALVE HOUSINGS: 2500 PSI [175 Bar] = Aluminum - Anodized.
5000 PSI [350 Bar] = Steel - Unplated.
OPERATING TEMPERATURE: -40° to +250° F. [-40° to +120° C.]
OPERATING MEDIA: All general purpose hydraulic fluids such as
MIL-H-5606, SAE-#10, SAE-#20, etc.
INSTALLATION: No restriction.
FILTRATION: 25 microns or better.
SEAL KIT NUMBER: SKN-0828 for buna "N".
SKV-0828 for viton.
WEIGHT: 0.30 lb [.14 kg] cartridge only.
VALVE CAVITY: #C0825, See Page 0-021.0.
info.el@bucherhydraulics.com www.bucherhydraulics.com/commoncavity
© 2015 by Bucher Hydraulics, Inc., 2545 Northwest Parkway, Elgin, Illinois 60124, USA
All rights reserved.
The technical information in this catalog, may contain calculated figures (for reference only) and not actual performance data for this product.
Data is provided for the purpose of product description only, and must not be construed as warranted characteristics in the legal sense.
The information does not relieve users from the duty of conducting their own evaluations and tests. Because the products are subject to
continual improvement, we reserve the right to amend the product specifications contained in this catalogue.
Reference: 520-P-080510-EN-00/09.2015
CBPA-10
1
COUNTERBALANCE VALVE
3
POPPET TYPE WITH FREE REVERSE FLOW. 2
TORQUE:
Steel = 55/60 Ft-Lb. [74/81 Nm]
Aluminum = 35/40 Ft-Lb. [47/54 Nm]
1.06"
[27,0]
HEX
.315"[8,0] HEX.
1.75"
[44,5]
2.75" MAX.
[69,8]
3
1.90"
[48,3]
2.50" 2
[63,5]
PRESSURE RANGE
SIZE 15 = 100 TO 1500 PSI
PRESSURE DROP (
Reference: 520-P-080520-EN-00/09.2015
CBPA-10
COUNTERBALANCE VALVE
POPPET TYPE WITH FREE REVERSE FLOW.
DESCRIPTION
This unit is a DIRECT ACTING, SCREW IN CARTRIDGE STYLE,
POPPET TYPE, ADJUSTABLE, PILOT ASSISTED, HYDRAULIC
COUNTERBALANCE VALVE.
OPERATIONS
This valve controls moving load and preventing it from running ahead
of the pump, locking the load in any position, it also provides static
overload and thermal expansion protection.
This valve is a MODULATING DEVICE that allows free flow from port 2
to port 1 and then blocks reverse flow until a pilot pressure INVERSELY
PROPORTIONAL to the load pressure is sensed at port 3 modulating
flow from port 1 to port 2.
Reference: 520-P-080520-EN-00/09.2015
CBPA-10
COUNTERBALANCE VALVE
POPPET TYPE WITH FREE REVERSE FLOW.
SPECIFICATIONS
OPERATING PRESSURE: 5,000 PSI [350 Bar]
PROOF PRESSURE: 10,000 PSI [700 Bar]
FLOW: 20.0 GPM [76 L/M] nominal. See performance chart.
PILOT RATIO: 4 to 1
INTERNAL LEAKAGE: 5 drops/min @ 90% of crack pressure.^J
DEFINITION OF CRACK: evident at 0.06 GPM [0.25 LPM]
VALVE HOUSINGS: 2500 PSI [175 Bar] = Aluminum - Anodized.
5000 PSI [350 Bar] = Steel - Unplated.
OPERATING TEMPERATURE: -40° to +250° F. [-40° to +120° C.]
OPERATING MEDIA: All general purpose hydraulic fluids such as
MIL-H-5606, SAE-#10, SAE-#20, etc.
INSTALLATION: No restriction.
FILTRATION: 25 microns or better.
SEAL KIT NUMBER: SKN-1028 for buna "N".
SKV-1028 for viton.
WEIGHT: 0.46 lb [.21 kg] cartridge only.
VALVE CAVITY: #C1025, See Page 0-022.0.
info.el@bucherhydraulics.com www.bucherhydraulics.com/commoncavity
© 2015 by Bucher Hydraulics, Inc., 2545 Northwest Parkway, Elgin, Illinois 60124, USA
All rights reserved.
The technical information in this catalog, may contain calculated figures (for reference only) and not actual performance data for this product.
Data is provided for the purpose of product description only, and must not be construed as warranted characteristics in the legal sense.
The information does not relieve users from the duty of conducting their own evaluations and tests. Because the products are subject to
continual improvement, we reserve the right to amend the product specifications contained in this catalogue.
Reference: 520-P-080520-EN-00/09.2015
CBPA-20M
2
COUNTERBALANCE VALVE 3
POPPET TYPE WITH FREE REVERSE FLOW. 1
1.06"
[27,0]
HEX
2.41"
[61,2]
1.36"
2
[34,5]
PRESSURE RANGE
SIZE 15 = 100 TO 1500 PSI
PRESSURE DROP (
PSI BAR
FOR ADJUSTMENT CONTROL 0 5 10 15 20
OPTIONS SEE PAGE 0-050.0 G.P.M.(135 SUS)
Reference: 520-P-081120-EN-00/09.2015
CBPA-20M
COUNTERBALANCE VALVE
POPPET TYPE WITH FREE REVERSE FLOW.
DESCRIPTION
This unit is a DIRECT ACTING, SCREW IN CARTRIDGE STYLE,
POPPET TYPE, ADJUSTABLE, PILOT ASSISTED, HYDRAULIC COUNTERBALANCE VALVE.
OPERATIONS
This valve controls moving load and preventing it from running ahead
of the pump, locking the load in any position, it also provides static
overload and thermal expansion protection.
This valve is a MODULATING DEVICE that allows free flow from port 2
to port 1 and then blocks reverse flow until a pilot pressure INVERSELY
PROPORTIONAL to the load pressure is sensed at port 3 modulating out
flow from port 1 to port 2.
FEATURES AND BENEFITS
Leakproof screw adjustment.
Adjustment screw can not be backed out of the valve.
Overset protection - spring can not go solid.
Hardened precision fitted poppet & cage provides reliable, long life.
A unibody cage construction and with no dynamic seals on all moving
parts provides very low hysteresis (1.5%) and reliable operation.
Minor internal leakage past the pilot piston purges the air from the
pilot line thus improving stability.
All external carbon steel parts are plated for longer life against the elements.
Valve is available with screw, tamperproof, capped and handknob adjustments.
All cartridge valves are 100% functionally tested.
Fits in to SUN cavity # T-11A.
SPECIFICATIONS
OPERATING PRESSURE: 5,000 PSI [350 Bar]
PROOF PRESSURE: 10,000 PSI [700 Bar]
FLOW: 20.0 GPM [76 L/M] nominal. See performance chart.
PILOT RATIO: 4 to 1
INTERNAL LEAKAGE: 5 drops/min @ 90% of crack pressure.^J
DEFINITION OF CRACK: evident at 0.06 GPM [0.25 LPM]
OPERATING TEMPERATURE: -40° to +250° F. [-40° to +120° C.]
OPERATING MEDIA: All general purpose hydraulic fluids such as
MIL-H-5606, SAE-#10, SAE-#20, etc.
INSTALLATION: No restriction.
FILTRATION: 25 microns or better.
SEAL KIT NUMBER: SKN-1029 for buna "N".
SKV-1029 for viton.
WEIGHT: 0.46 lb [.21 kg] cartridge only.
VALVE CAVITY: SUN # T-11A.
info.el@bucherhydraulics.com www.bucherhydraulics.com/commoncavity
© 2015 by Bucher Hydraulics, Inc., 2545 Northwest Parkway, Elgin, Illinois 60124, USA
All rights reserved.
The technical information in this catalog, may contain calculated figures (for reference only) and not actual performance data for this product.
Data is provided for the purpose of product description only, and must not be construed as warranted characteristics in the legal sense.
The information does not relieve users from the duty of conducting their own evaluations and tests. Because the products are subject to
continual improvement, we reserve the right to amend the product specifications contained in this catalogue.
Reference: 520-P-081120-EN-00/09.2015
CBPA-12
1
COUNTERBALANCE VALVE
3
POPPET TYPE WITH FREE REVERSE FLOW. 2
TORQUE:
Steel = 70/75 Ft-Lb. [95/102 Nm]
Aluminum = 55/60 Ft-Lb. [74/81 Nm]
1.31"
[33,3]
HEX
.315"[8,0] HEX.
1.96"
[49,8]
3.50"
[88,9]
2.33"
[59,2]
2
3.00"
[76,2] 1
BASIC 27,6
P)
400
PRESSURE RANGE
SIZE 15 = 100 TO 1500 PSI
PRESSURE DROP (
Reference: 520-P-080530-EN-00/09.2015
CBPA-12
COUNTERBALANCE VALVE
POPPET TYPE WITH FREE REVERSE FLOW.
DESCRIPTION
This unit is a DIRECT ACTING, SCREW IN CARTRIDGE STYLE,
POPPET TYPE, ADJUSTABLE, PILOT ASSISTED, HYDRAULIC COUNTERBALANCE VALVE.
OPERATIONS
This valve controls moving load and preventing it from running ahead
of the pump, locking the load in any position, it also provides static
overload and thermal expansion protection.
This valve is a MODULATING DEVICE that allows free flow from port 2
to port 1 and then blocks reverse flow until a pilot pressure INVERSELY
PROPORTIONAL to the load pressure is sensed at port 3 modulating
flow from port 1 to port 2.
FEATURES AND BENEFITS
Leakproof screw adjustment.
Adjustment screw can not be backed out of the valve.
Overset protection - spring can not go solid.
Hardened precision fitted poppet & cage provides reliable, long life.
A unibody cage construction and with no dynamic seals on all moving
parts provides very low hysteresis (1.5%) and reliable operation.
Minor internal leakage past the pilot piston purges the air from the
pilot line thus improving stability.
All external carbon steel parts are plated for longer life against the elements.
Valve is available with screw, tamperproof, and capped adjustments.
All cartridge valves are 100% functionally tested.
SPECIFICATIONS
OPERATING PRESSURE: 4,000 PSI [276 Bar]
PROOF PRESSURE: 10,000 PSI [700 Bar]
FLOW: 35.0 GPM [132 L/M] nominal. See performance chart.
PILOT RATIO: 4 to 1
INTERNAL LEAKAGE: 5 drops/min @ 90% of crack pressure.^J
DEFINITION OF CRACK: evident at 0.06 GPM [0.25 LPM]
VALVE HOUSINGS: 2500 PSI [175 Bar] = Aluminum - Anodized.
5000 PSI [350 Bar] = Steel - Unplated.
OPERATING TEMPERATURE: -40° to +250° F. [-40° to +120° C.]
OPERATING MEDIA: All general purpose hydraulic fluids such as
MIL-H-5606, SAE-#10, SAE-#20, etc.
INSTALLATION: No restriction.
FILTRATION: 25 microns or better.
SEAL KIT NUMBER: SKN-1228 for Buna "N".
SKV-1228 for Viton.
WEIGHT: 0.84 lb [0,38 kg] cartridge only.
VALVE CAVITY: #C1225, See Page 0-023.0.
info.el@bucherhydraulics.com www.bucherhydraulics.com/commoncavity
© 2015 by Bucher Hydraulics, Inc., 2545 Northwest Parkway, Elgin, Illinois 60124, USA
All rights reserved.
The technical information in this catalog, may contain calculated figures (for reference only) and not actual performance data for this product.
Data is provided for the purpose of product description only, and must not be construed as warranted characteristics in the legal sense.
The information does not relieve users from the duty of conducting their own evaluations and tests. Because the products are subject to
continual improvement, we reserve the right to amend the product specifications contained in this catalogue.
Reference: 520-P-080530-EN-00/09.2015
Counterbalance Valve, Poppet Type, SAE 10 / NG 8
Qmax = 15.0 gpm (60l/min),pmax = 5000 psi (350bar)
direct acting, pilot assisted, poppet type, non-vented, adjustable
Series CBPP-10… / CBPP-20M…
2 Symbol
1
3 2
3 Technical data
Reference: 520-P-081520-EN-03
Issue: 10.2017 1/5
Hydraulic characteristics Description, value, unit
Maximum operating pressure 5000psi (350bar)
Maximum flow rate Standard 15.0 gpm (60l/min)
Nominal pressure ranges 1500, 3000, 5000 psi (100, 210, 350 bar)
For further pressure ranges, please contact BUCHER
p = f (Q) Relief Characteristic [pw = 5000 psi] p = f (Q) Pressure drop - Flow rate characteristic
unrestricted *** unrestricted ***
p [psi (bar)] p [psi (bar)]
5000 (350) 500 (35)
0 (0) EL_P0016.ai
0 (0) EL_P0014.ai
3 6 9 12 15 3 6 9 12 15
(0) (11.4) (22.7) (34.0) (45.5) (56.8) (0) (11.4) (22.7) (34.0) (45.5) (56.8)
Q [gpm (l/min)] Q [gpm (l/min)]
p = f (Q) Relief Characteristic [pw = 5000 psi] p = f (Q) Pressure drop - Flow rate characteristic
restricted restricted
p [psi (bar)] p [psi (bar)]
5000 (350) 500 (35)
0 (0) EL_P0015.ai
0 (0) EL_P0017.ai
3 6 9 12 15 3 6 9 12 15
(0) (11.4) (22.7) (34.0) (45.5) (56.8) (0) (11.4) (22.7) (34.0) (45.5) (56.8)
Q [gpm (l/min)] Q [gpm (l/min)]
2/5 520-P-081520-EN-03/10.2017
Series CBPP-10… / CBPP-20M…
5 Dimensions & sectional view
5.1 Insertion in cavity type “C1025” 5.2 Insertion in cavity type “T-11A”
9/16 (14.3)
9/16 (14.3)
7/8 (22)
(69.3)
2.73
7/8 (22) MA= 1)
(55.88)
2.20
MA= 1)
(104.1)
4.10
6
(104.90)
4.13
3
3 3
7/8−20 UNEF 2
3
5 5
2 M20x1.5
(34.8)
5 1.37
(49.02)
2
1.93
2 4
4
1
1
1
1
Tightening torque MA 1)
When fitted in steel 55…60 ft-lbs 75…81 [Nm] 30…35 ft-lbs 40…47 [Nm]
When fitted in aluminum 35…40 ft-lbs 47…54 [Nm] 30…35 ft-lbs 40…47 [Nm]
1/16
(23.01)
(23.01)
0.906
0.906
(19.05)
MA = 0.5 ft−lbs
0.75
MA = 1 [Nm]
Air bleeding with With capped adjustment screw “C” ** Adjusting screw with tamper-proof cap “T” **
capped adjustment screw “B” (order separately in plain language)
520-P-081520-EN-03/10.2017 3/5
Series CBPP-10… / CBPP-20M…
6 Installation information
Seal kit NBR Nr. SKN-1028 2) Seal kit NBR Nr. SKN-1029 3)
Item Qty. Description Item Qty. Description
1 1 O-ring no. 910 0.755 x 0.097 N90 1 1 O-ring Nr. 015 0.551 x 0.070 N70
2 1 O-ring no. 016 0.614 x 0.070 N70 2 1 O-ring no. 016 0.614 x 0.070 N70
3 1 O-ring Nr. 015 0.551 x 0.070 N70 3 1 O-ring no. 017 0.676 x 0.07 N70
4 2 Backup ring 0.643 x 0.053 x .048 4 1 Backup ring 0.580 x 0.053 x .048
5 1 Backup ring 0.580 x 0.053 x .048 5 2 Backup ring 0.697 x 0.052 x .047
IMPORTANT!
When fitting the cartridges, use the specified tight
ening torque. The recommended relief pressure
setting is 30 % above operating pressure.
ATTENTION!
Only qualified personnel with mechanical skills
may carry out any maintenance work. Generally,
the only work that should ever be undertaken is to
check, and possibly replace, the seals. When
changing seals, oil or grease the new seals tho
roughly before fitting them.
4/5 520-P-081520-EN-03/10.2017
Series CBPP-10… / CBPP-20M…
7 Ordering code
Ex. CBPP - 10 - N - S - 0 - 3.0 - 50 / __ - A
info.el@bucherhydraulics.com www.bucherhydraulics.com/commoncavity
E 2017 by Bucher Hydraulics, Inc., 2545 Northwest Parkway, Elgin, Illinois 60124, USA
All rights reserved.
Data is provided for the purpose of product description only, and must not be construed as warranted characteristics in the legal sense. The
information does not relieve users from the duty of conducting their own evaluations and tests. Because the products are subject to continual
improvement, we reserve the right to amend the product specifications contained in this catalogue.
Classification: 430.325.360.305.315
520-P-081520-EN-03/10.2017 5/5
Series CBPP-10… / CBPP-20M…
DCBA-08
C1 C2
DUAL COUNTERBALANCE VALVE POPPET TYPE,
FREE REVERSE FLOW WITH CROSS-LINE PILOTS
V1 V2
V2
1.12"
[28,4]
V1 V2
2.50"
[63,5]
C1 C2
1.37" 0.60"
[34,8] [15,2]
3.38" 1.20"
[85,9] [30,5]
3.75"
[95,3]
BASIC
PRESSURE RANGE
SIZE 15 = 100 TO 1500 PSI 400 27,6
PRESSURE DROP (
Reference: 520-P-080610-EN-00/09.2015
DCBA-08
DUAL COUNTERBALANCE VALVE POPPET TYPE,
FREE REVERSE FLOW WITH CROSS-LINE PILOTS
DESCRIPTION
This unit consists of two CBPA cartridges in an inline housing. The cartridges
are direct acting, screw in cartridge style, poppet type, adjustable, pilot as
as-
sisted, hydraulic counterbalance valves.
OPERATIONS
This valve controls moving load and preventing it from running ahead
of the pump, locking the load in any position, it also provides static
overload and thermal expansion protection.
This valve is a MODULATING DEVICE that allows free flow from port V1
to port C1 and V2 to C2 then blocks reverse flow until a pilot pressure
INVERSELY PROPORTIONAL to the load pressure is sensed at pilot ports
which are connected to ports V1 and V2 therefore modulating flow from
port C1 or port C2.
Reference: 520-P-080610-EN-00/09.2015
DCBA-08
DUAL COUNTERBALANCE VALVE POPPET TYPE,
FREE REVERSE FLOW WITH CROSS-LINE PILOTS
SPECIFICATIONS
OPERATING PRESSURE: 5,000 PSI [350 Bar]
PROOF PRESSURE: 10,000 PSI [700 Bar]
FLOW: 10.0 GPM [38 L/M] nominal. See performance chart.
PILOT RATIO: 4 to 1
INTERNAL LEAKAGE: 5 drops/min @ 90% of crack pressure.^J
DEFINITION OF CRACK: evident at 0.06 GPM [0.25 LPM]
VALVE HOUSINGS: 2500 PSI [175 Bar] = Aluminum - Anodized.
5000 PSI [350 Bar] = Steel - Unplated.
OPERATING TEMPERATURE: -40° to +250° F. [-40° to +120° C.]
OPERATING MEDIA: All general purpose hydraulic fluids such as
MIL-H-5606, SAE-#10, SAE-#20, etc.
INSTALLATION: No restriction.
FILTRATION: 25 microns or better.
SEAL KIT NUMBER: SKN-0828 for buna "N".
SKV-0828 for viton.
WEIGHT: 1 lb [0.4536 kg] Aluminum. 3.15 lbs [1.43 kg] Steel.
VALVE CAVITY: #C0825, See Page 0-021.0.
info.el@bucherhydraulics.com www.bucherhydraulics.com/commoncavity
© 2015 by Bucher Hydraulics, Inc., 2545 Northwest Parkway, Elgin, Illinois 60124, USA
All rights reserved.
The technical information in this catalog, may contain calculated figures (for reference only) and not actual performance data for this product.
Data is provided for the purpose of product description only, and must not be construed as warranted characteristics in the legal sense.
The information does not relieve users from the duty of conducting their own evaluations and tests. Because the products are subject to
continual improvement, we reserve the right to amend the product specifications contained in this catalogue.
Reference: 520-P-080610-EN-00/09.2015
DCBA-10
C1 C2
DUAL COUNTERBALANCE VALVE POPPET TYPE,
FREE REVERSE FLOW WITH CROSS-LINE PILOTS. V1 V2
V2
1.30"
[33,0]
V1 V2
3.00"
[76,2]
C1 C2
1.50" .63"
[38,1] [15,9]
3.63" 1.25"
[92,1] [31,8]
4.00"
[101,6]
PRESSURE RANGE
SIZE 15 = 100 TO 1500 PSI
30 = 300
PRESSURE DROP (
PSI BAR
FOR ADJUSTMENT CONTROL 0 5 10 15 20
OPTIONS SEE PAGE 0-050.0 G.P.M.(135 SUS)
Reference: 520-P-080620-EN-00/09.2015
DCBA-10
DUAL COUNTERBALANCE VALVE POPPET
TYPE, FREE REVERSE FLOW WITH CROSS-LINE PILOTS.
DESCRIPTION
This unit consists of two CBPA cartridges in an inline housing. The cartridges
are direct acting, screw in cartridge style, poppet type, adjustable, pilot as
as-
sisted, hydraulic counterbalance valves.
OPERATIONS
This valve controls moving load and preventing it from running ahead
of the pump, locking the load in any position, it also provides static
overload and thermal expansion protection.
This valve is a MODULATING DEVICE that allows free flow from port V1
to port C1 and V2 to C2 then blocks reverse flow until a pilot pressure
INVERSELY PROPORTIONAL to the load pressure is sensed at pilot ports
which are connected to ports V1 and V2 therefore modulating flow from
port C1 or port C2.
Reference: 520-P-080620-EN-00/09.2015
DCBA-10
DUAL COUNTERBALANCE VALVE POPPET
TYPE, FREE REVERSE FLOW WITH CROSS-LINE PILOTS.
SPECIFICATIONS
OPERATING PRESSURE: 5,000 PSI [350 Bar]
PROOF PRESSURE: 10,000 PSI [700 Bar]
FLOW: 20.0 GPM [76 L/M] nominal. See performance chart.
PILOT RATIO: 4 to 1
INTERNAL LEAKAGE: 5 drops/min @ 90% of crack pressure.^J
DEFINITION OF CRACK: evident at 0.06 GPM [0.25 LPM]
VALVE HOUSINGS: 2500 PSI [175 Bar] = Aluminum - Anodized.
5000 PSI [350 Bar] = Steel - Unplated.
OPERATING TEMPERATURE: -40° to +250° F. [-40° to +120° C.]
OPERATING MEDIA: All general purpose hydraulic fluids such as
MIL-H-5606, SAE-#10, SAE-#20, etc.
INSTALLATION: No restriction.
FILTRATION: 25 microns or better.
SEAL KIT NUMBER: SKN-1028 for buna "N".
SKV-1028 for viton.
WEIGHT: 2.65 lbs [1.21 kg] Aluminum. 5.25 lbs [2,38] Steel.
VALVE CAVITY: #C1025, See Page 0-022.0.
info.el@bucherhydraulics.com www.bucherhydraulics.com/commoncavity
© 2015 by Bucher Hydraulics, Inc., 2545 Northwest Parkway, Elgin, Illinois 60124, USA
All rights reserved.
The technical information in this catalog, may contain calculated figures (for reference only) and not actual performance data for this product.
Data is provided for the purpose of product description only, and must not be construed as warranted characteristics in the legal sense.
The information does not relieve users from the duty of conducting their own evaluations and tests. Because the products are subject to
continual improvement, we reserve the right to amend the product specifications contained in this catalogue.
Reference: 520-P-080620-EN-00/09.2015
DCBA-12
C1 C2
DUAL COUNTERBALANCE VALVE POPPET TYPE,
FREE REVERSE FLOW WITH CROSS-LINE PILOTS V1 V2
1.67" V2
[42,4]
V1
V2 3.50"
[88,9]
C1 C2
.81"
[20,7]
1.90"
[48,3]
1.63"
4.50" [41,3]
[114,3]
5.00"
[127]
BASIC
P)
400 27,6
PRESSURE RANGE
SIZE 15 = 100 TO 1500 PSI
PRESSURE DROP (
PSI BAR
FOR ADJUSTMENT CONTROL 0 10 20 30 40
OPTIONS SEE PAGE 0-050.0 G.P.M.(135 SUS)
Reference: 520-P-080630-EN-00/09.2015
DCBA-12
DUAL COUNTERBALANCE VALVE POPPET
TYPE, FREE REVERSE FLOW WITH CROSS-LINE PILOTS.
DESCRIPTION
This unit consists of two CBPA cartridges in an inline housing. The cartridges
are direct acting, screw in cartridge style, poppet type, adjustable, pilot as
as-
sisted, hydraulic counterbalance valves.
OPERATIONS
This valve controls moving load and preventing it from running ahead
of the pump, locking the load in any position, it also provides static
overload and thermal expansion protection.
This valve is a MODULATING DEVICE that allows free flow from port V1
to port C1 and V2 to C2 then blocks reverse flow until a pilot pressure
INVERSELY PROPORTIONAL to the load pressure is sensed at pilot ports
which are connected to ports V1 and V2 therefore modulating flow from
port C1 or port C2.
FEATURES AND BENEFITS
Leakproof screw adjustment.
Adjustment screw can not be backed out of the valve.
Overset protection - spring can not go solid.
Hardened precision fitted poppet & cage provides reliable, long life.
A unibody cage construction and with no dynamic seals on all moving
parts provides very low hysteresis (1.5%) and reliable operation.
Minor internal leakage past the pilot piston purges the air from the
pilot line thus improving stability.
All external carbon steel parts are plated for longer life against the elements.
Valve is available with screw, tamperproof and capped adjustments.
All cartridge valves are 100% functionally tested.
SPECIFICATIONS
OPERATING PRESSURE: 4,000 PSI [276 Bar]
PROOF PRESSURE: 10,000 PSI [700 Bar]
FLOW: 35.0 GPM [132 L/M] nominal. See performance chart.
PILOT RATIO: 4 to 1
INTERNAL LEAKAGE: 5 drops/min @ 90% of crack pressure.^J
DEFINITION OF CRACK: evident at 0.06 GPM [0.25 LPM]
VALVE HOUSINGS: 2500 PSI [175 Bar] = Aluminum - Anodized.
5000 PSI [350 Bar] = Steel - Unplated.
OPERATING TEMPERATURE: -40° to +250° F. [-40° to +120° C.]
OPERATING MEDIA: All general purpose hydraulic fluids such as
MIL-H-5606, SAE-#10, SAE-#20, etc.
INSTALLATION: No restriction.
FILTRATION: 25 microns or better.
SEAL KIT NUMBER: SKN-1228 for Buna "N".
SKV-1228 for Viton.
WEIGHT: 2.65 lbs [1.21 kg] Aluminum. 5.25 lbs [2.38 kg] Steel.
info.el@bucherhydraulics.com www.bucherhydraulics.com/commoncavity
© 2015 by Bucher Hydraulics, Inc., 2545 Northwest Parkway, Elgin, Illinois 60124, USA
All rights reserved.
The technical information in this catalog, may contain calculated figures (for reference only) and not actual performance data for this product.
Data is provided for the purpose of product description only, and must not be construed as warranted characteristics in the legal sense.
The information does not relieve users from the duty of conducting their own evaluations and tests. Because the products are subject to
continual improvement, we reserve the right to amend the product specifications contained in this catalogue.
Reference: 520-P-080630-EN-00/09.2015
CBPS-08
1
COUNTERBALANCE VALVE POPPET TYPE WITH
3
FREE REVERSE FLOW & SEALS ON THE PISTON 2
TORQUE:
Steel = 35/40 Ft-Lb. [47/54 Nm]
Aluminum = 25/30 Ft-Lb. [34/41 Nm]
1.00"
[25,4]
HEX
1.62"
[41,1]
MAX
2.50"
3
[63,5] 1.63"
[41,4]
2
2.25"
[57,2]
PRESSURE RANGE
SIZE 15 = 100 TO 1500 PSI 400 27,6
PRESSURE DROP (
Reference: 520-P-080710-EN-00/09.2015
CBPS-08
COUNTERBALANCE VALVE POPPET TYPE WITH
FREE REVERSE FLOW & SEALS ON THE PISTON.
DESCRIPTION
This unit is a DIRECT ACTING, SCREW IN CARTRIDGE STYLE,
POPPET TYPE, ADJUSTABLE, PILOT ASSISTED, HYDRAULIC
COUNTERBALANCE VALVE.
OPERATIONS
This valve controls moving load and preventing it from running ahead
of the pump, locking the load in any position, it also provides static
overload and thermal expansion protection.
This valve is a MODULATING DEVICE that allows free flow from port 2
to port 1 and then blocks reverse flow until a pilot pressure INVERSELY
PROPORTIONAL to the load pressure is sensed at port 3 modulating
flow from port 1 to port 2.
Reference: 520-P-080710-EN-00/09.2015
CBPS-08
COUNTERBALANCE VALVE POPPET TYPE WITH
FREE REVERSE FLOW & SEALS ON THE PISTON.
SPECIFICATIONS
OPERATING PRESSURE: 5,000 PSI [350 Bar]
PROOF PRESSURE: 10,000 PSI [700 Bar]
FLOW: 10.0 GPM [38 L/M] nominal. See performance chart.
PILOT RATIO: 4 to 1
INTERNAL LEAKAGE: 5 drops/min @ 90% of crack pressure.^J
DEFINITION OF CRACK: evident at 0.06 GPM [0.25 LPM]
VALVE HOUSINGS: 2500 PSI [175 Bar] = Aluminum - Anodized.
5000 PSI [350 Bar] = Steel - Unplated.
OPERATING TEMPERATURE: -40° to +250° F. [-40° to +120° C.]
OPERATING MEDIA: All general purpose hydraulic fluids such as
MIL-H-5606, SAE-#10, SAE-#20, etc.
INSTALLATION: No restriction.
FILTRATION: 25 microns or better.
SEAL KIT NUMBER: SKN-0828 for buna "N".
SKV-0828 for viton.
WEIGHT: 0.30 lb [.14 kg] cartridge only.
VALVE CAVITY: #C0825, See Page 0-021.0.
info.el@bucherhydraulics.com www.bucherhydraulics.com/commoncavity
© 2015 by Bucher Hydraulics, Inc., 2545 Northwest Parkway, Elgin, Illinois 60124, USA
All rights reserved.
The technical information in this catalog, may contain calculated figures (for reference only) and not actual performance data for this product.
Data is provided for the purpose of product description only, and must not be construed as warranted characteristics in the legal sense.
The information does not relieve users from the duty of conducting their own evaluations and tests. Because the products are subject to
continual improvement, we reserve the right to amend the product specifications contained in this catalogue.
Reference: 520-P-080710-EN-00/09.2015
CBPS-10
1
COUNTERBALANCE VALVE POPPET TYPE, FREE
3
REVERSE FLOW & SEALS ON THE PISTON. 2
TORQUE:
Steel = 55/60 Ft-Lb. [74/81 Nm]
Aluminum = 35/40 Ft-Lb. [47/54 Nm]
1.06"
[27,0]
HEX
.315"[8,0] HEX.
1.75"
[44,5]
MAX.
2.75"
[69,8]
3
1.90"
[48,3]
2
2.50" 1
[63,5]
BASIC 27,6
P)
400
PRESSURE RANGE
SIZE 15 = 100 TO 1500 PSI
PRESSURE DROP (
Reference: 520-P-080720-EN-00/09.2015
CBPS-10
COUNTERBALANCE VALVE POPPET TYPE
WITH FREE REVERSE FLOW & SEALS ON THE PISTON.
DESCRIPTION
This unit is a DIRECT ACTING, SCREW IN CARTRIDGE STYLE,
POPPET TYPE, ADJUSTABLE, PILOT ASSISTED, HYDRAULIC
COUNTERBALANCE VALVE.
OPERATIONS
This valve controls moving load and preventing it from running ahead
of the pump, locking the load in any position, it also provides static
overload and thermal expansion protection.
This valve is a MODULATING DEVICE that allows free flow from port 2
to port 1 and then blocks reverse flow until a pilot pressure INVERSELY
PROPORTIONAL to the load pressure is sensed at port 3 modulating
flow from port 1 to port 2.
Reference: 520-P-080720-EN-00/09.2015
CBPS-10
COUNTERBALANCE VALVE POPPET TYPE
WITH FREE REVERSE FLOW & SEALS ON THE PISTON.
SPECIFICATIONS
OPERATING PRESSURE: 5,000 PSI [350 Bar]
PROOF PRESSURE: 10,000 PSI [700 Bar]
FLOW: 20.0 GPM [76 L/M] nominal. See performance chart.
PILOT RATIO: 4 to 1
INTERNAL LEAKAGE: 5 drops/min @ 90% of crack pressure.^J
DEFINITION OF CRACK: evident at 0.06 GPM [0.25 LPM]
VALVE HOUSINGS: 2500 PSI [175 Bar] = Aluminum - Anodized.
5000 PSI [350 Bar] = Steel - Unplated.
OPERATING TEMPERATURE: -40° to +250° F. [-40° to +120° C.]
OPERATING MEDIA: All general purpose hydraulic fluids such as
MIL-H-5606, SAE-#10, SAE-#20, etc.
INSTALLATION: No restriction.
FILTRATION: 25 microns or better.
SEAL KIT NUMBER: SKN-1028 for buna "N".
SKV-1028 for viton.
WEIGHT: 0.46 lb [.21 kg] cartridge only.
VALVE CAVITY: #C1025, See Page 0-022.0.
info.el@bucherhydraulics.com www.bucherhydraulics.com/commoncavity
© 2015 by Bucher Hydraulics, Inc., 2545 Northwest Parkway, Elgin, Illinois 60124, USA
All rights reserved.
The technical information in this catalog, may contain calculated figures (for reference only) and not actual performance data for this product.
Data is provided for the purpose of product description only, and must not be construed as warranted characteristics in the legal sense.
The information does not relieve users from the duty of conducting their own evaluations and tests. Because the products are subject to
continual improvement, we reserve the right to amend the product specifications contained in this catalogue.
Reference: 520-P-080720-EN-00/09.2015
CBPS-20M
2
COUNTERBALANCE VALVE POPPET TYPE, FREE 3
1.06"
[27,0]
HEX
2.41"
[61,2]
2 1.36"
[34,5]
PSI BAR
FOR ADJUSTMENT CONTROL 0 5 10 15 20
OPTIONS SEE PAGE 0-050.0 G.P.M.(135 SUS)
Reference: 520-P-081220-EN-00/09.2015
CBPS-20M
COUNTERBALANCE VALVE POPPET TYPE,
FREE REVERSE FLOW & SEALS ON THE PILOT PISTON.
DESCRIPTION
This unit is a DIRECT ACTING, SCREW IN CARTRIDGE STYLE,
POPPET TYPE, ADJUSTABLE, PILOT ASSISTED, HYDRAULIC COUNTERBALANCE VALVE.
OPERATIONS
This valve controls moving load and preventing it from running ahead
of the pump, locking the load in any position, it also provides static
overload and thermal expansion protection.
This valve is a MODULATING DEVICE that allows free flow from port 2
to port 1 and then blocks reverse flow until a pilot pressure INVERSELY
PROPORTIONAL to the load pressure is sensed at port 3 modulating out
flow from port 1 to port 2.
FEATURES AND BENEFITS
Leakproof screw adjustment.
Adjustment screw can not be backed out of the valve.
Overset protection - spring can not go solid.
Hardened precision fitted poppet & cage provides reliable, long life.
A unibody adapter cage construction provides very reliable operation.
Seals on the pilot piston assures no flow of fluid between port #2 and port #3.
All external carbon steel parts are plated for longer life against the elements.
Valve is available with screw, tamperproof, capped and handknob adjustments.
All cartridge valves are 100% functionally tested.
Fits in to SUN cavity # T-11A.
SPECIFICATIONS
OPERATING PRESSURE: 5,000 PSI [350 Bar]
PROOF PRESSURE: 10,000 PSI [700 Bar]
FLOW: 20.0 GPM [76 L/M] nominal. See performance chart.
PILOT RATIO: 4 to 1
INTERNAL LEAKAGE: 5 drops/min @ 90% of crack pressure.^J
DEFINITION OF CRACK: evident at 0.06 GPM [0.25 LPM]
OPERATING TEMPERATURE: -40° to +250° F. [-40° to +120° C.]
OPERATING MEDIA: All general purpose hydraulic fluids such as
MIL-H-5606, SAE-#10, SAE-#20, etc.
INSTALLATION: No restriction.
FILTRATION: 25 microns or better.
SEAL KIT NUMBER: SKN-1029 for buna "N".
SKV-1029 for viton.
WEIGHT: 0.46 lb [.21 kg] cartridge only.
VALVE CAVITY: SUN # T-11A.
info.el@bucherhydraulics.com www.bucherhydraulics.com/commoncavity
© 2015 by Bucher Hydraulics, Inc., 2545 Northwest Parkway, Elgin, Illinois 60124, USA
All rights reserved.
The technical information in this catalog, may contain calculated figures (for reference only) and not actual performance data for this product.
Data is provided for the purpose of product description only, and must not be construed as warranted characteristics in the legal sense.
The information does not relieve users from the duty of conducting their own evaluations and tests. Because the products are subject to
continual improvement, we reserve the right to amend the product specifications contained in this catalogue.
Reference: 520-P-081220-EN-00/09.2015
CBPS-12
1
COUNTERBALANCE VALVE POPPET TYPE,
3
FREE REVERSE FLOW & SEALS ON THE PISTON 2
TORQUE:
Steel = 70/75 Ft-Lb. [95/102 Nm]
Aluminum = 55/60 Ft-Lb. [74/81 Nm]
1.31"
[33,3]
HEX
.315"[8,0] HEX.
1.96"
[49,8]
3.50"
[88,9] 3
2.33"
[59,2]
2
1
3.00"
[76,2]
PRESSURE RANGE
SIZE 15 = 100 TO 1500 PSI
12 = 1.062"-12 UNF 30 = 300 TO 3000 PSI
PRESSURE DROP (
Reference: 520-P-080730-EN-00/09.2015
CBPS-12
COUNTERBALANCE VALVE POPPET TYPE
WITH FREE REVERSE FLOW & SEALS ON THE PISTON.
DESCRIPTION
This unit is a DIRECT ACTING, SCREW IN CARTRIDGE STYLE,
POPPET TYPE, ADJUSTABLE, PILOT ASSISTED, HYDRAULIC COUNTERBALANCE VALVE.
OPERATIONS
This valve controls moving load and preventing it from running ahead
of the pump, locking the load in any position, it also provides static
overload and thermal expansion protection.
This valve is a MODULATING DEVICE that allows free flow from port 2
to port 1 and then blocks reverse flow until a pilot pressure INVERSELY
PROPORTIONAL to the load pressure is sensed at port 3 modulating
flow from port 1 to port 2.
FEATURES AND BENEFITS
Leakproof screw adjustment.
Adjustment screw can not be backed out of the valve.
Overset protection - spring can not go solid.
Hardened precision fitted poppet & cage provides reliable, long life.
A unibody adapter cage construction provides very reliable operation.
Seals on the pilot piston assures no interflow of fluid between port #2
and port #3.
All external carbon steel parts are plated for longer life against the elements.
Valve is available with screw, tamperproof and capped adjustments.
All cartridge valves are 100% functionally tested.
SPECIFICATIONS
OPERATING PRESSURE: 4,000 PSI [276 Bar]
PROOF PRESSURE: 10,000 PSI [700 Bar]
FLOW: 35.0 GPM [132 L/M] nominal. See performance chart.
PILOT RATIO: 4 to 1
INTERNAL LEAKAGE: 5 drops/min @ 90% of crack pressure.^J
DEFINITION OF CRACK: evident at 0.06 GPM [0.25 LPM]
VALVE HOUSINGS: 2500 PSI [175 Bar] = Aluminum - Anodized.
5000 PSI [350 Bar] = Steel - Unplated.
OPERATING TEMPERATURE: -40° to +250° F. [-40° to +120° C.]
OPERATING MEDIA: All general purpose hydraulic fluids such as
MIL-H-5606, SAE-#10, SAE-#20, etc.
INSTALLATION: No restriction.
FILTRATION: 25 microns or better.
SEAL KIT NUMBER: SKN-1228 for Buna "N".
SKV-1228 for Viton.
WEIGHT: 0.84 lb [0,38 kg] cartridge only.
VALVE CAVITY: #C1225, See Page 0-023.0.
info.el@bucherhydraulics.com www.bucherhydraulics.com/commoncavity
© 2015 by Bucher Hydraulics, Inc., 2545 Northwest Parkway, Elgin, Illinois 60124, USA
All rights reserved.
The technical information in this catalog, may contain calculated figures (for reference only) and not actual performance data for this product.
Data is provided for the purpose of product description only, and must not be construed as warranted characteristics in the legal sense.
The information does not relieve users from the duty of conducting their own evaluations and tests. Because the products are subject to
continual improvement, we reserve the right to amend the product specifications contained in this catalogue.
Reference: 520-P-080730-EN-00/09.2015
DCBS-08
C1 C2
COUNTERBALANCE VALVE POPPET TYPE WITH
FREE REVERSE FLOW & SEALS ON THE PISTON.
V1 V2
V2
1.12"
[28,4]
V1 V2
2.50"
[63,5]
C1 C2
1.37" 0.60"
[34,8] [15,2]
3.38" 1.20"
[85,9] [30,5]
3.75"
[95,3]
BASIC
PRESSURE RANGE
PRESSURE DROP (
Reference: 520-P-080810-EN-00/09.2015
DCBS-08
COUNTERBALANCE VALVE POPPET TYPE WITH
FREE REVERSE FLOW & SEALS ON THE PISTON.
DESCRIPTION
This unit consists of two CBPS cartridges in an inline housing. The cartridges
are direct acting, screw in cartridge style, poppet type, adjustable, pilot as
as-
sisted, hydraulic counterbalance valves.
OPERATIONS
This valve controls moving load and preventing it from running ahead
of the pump, locking the load in any position, it also provides static
overload and thermal expansion protection.
This valve is a MODULATING DEVICE that allows free flow from port V1
to port C1 and V2 to C2 then blocks reverse flow until a pilot pressure
INVERSELY PROPORTIONAL to the load pressure is sensed at pilot ports
which are connected to ports V1 and V2 therefore modulating flow from
port C1 or port C2.
Reference: 520-P-080810-EN-00/09.2015
DCBS-08
COUNTERBALANCE VALVE POPPET TYPE WITH
FREE REVERSE FLOW & SEALS ON THE PISTON.
SPECIFICATIONS
OPERATING PRESSURE: 5,000 PSI [350 Bar]
PROOF PRESSURE: 10,000 PSI [700 Bar]
FLOW: 10.0 GPM [38 L/M] nominal. See performance chart.
PILOT RATIO: 4 to 1
INTERNAL LEAKAGE: 5 drops/min @ 90% of crack pressure.^J
DEFINITION OF CRACK: evident at 0.06 GPM [0.25 LPM]
VALVE HOUSINGS: 2500 PSI [175 Bar] = Aluminum - Anodized.
5000 PSI [350 Bar] = Steel - Unplated.
OPERATING TEMPERATURE: -40° to +250° F. [-40° to +120° C.]
OPERATING MEDIA: All general purpose hydraulic fluids such as
MIL-H-5606, SAE-#10, SAE-#20, etc.
INSTALLATION: No restriction.
FILTRATION: 25 microns or better.
SEAL KIT NUMBER: SKN-0828 for buna "N".
SKV-0828 for viton.
WEIGHT: 1 lb [0.4536 kg] Aluminum. 3.15 lbs [1.43 kg] Steel.
VALVE CAVITY: #C0825, See Page 0-021.0.
info.el@bucherhydraulics.com www.bucherhydraulics.com/commoncavity
© 2015 by Bucher Hydraulics, Inc., 2545 Northwest Parkway, Elgin, Illinois 60124, USA
All rights reserved.
The technical information in this catalog, may contain calculated figures (for reference only) and not actual performance data for this product.
Data is provided for the purpose of product description only, and must not be construed as warranted characteristics in the legal sense.
The information does not relieve users from the duty of conducting their own evaluations and tests. Because the products are subject to
continual improvement, we reserve the right to amend the product specifications contained in this catalogue.
Reference: 520-P-080810-EN-00/09.2015
DCBS-10
C1 C2
DUAL COUNTERBALANCE VALVE POPPET TYPE,
FREE REVERSE FLOW WITH CROSS-LINE PILOTS V1 V2
1.30" V2
[33,0]
V1 V2
3.00"
[76,2]
C1 C2
1.50" .63"
[38,1] [15,9]
3.63" 1.25"
[92,1] [31,8]
4.00"
[101,6]
BASIC 27,6
P)
400
PRESSURE RANGE
SIZE 15 = 100 TO 1500 PSI
PRESSURE DROP (
PSI BAR
FOR ADJUSTMENT CONTROL 0 5 10 15 20
OPTIONS SEE PAGE 0-050.0 G.P.M.(135 SUS)
Reference: 520-P-080820-EN-00/09.2015
DCBS-10
DUAL COUNTERBALANCE VALVE POPPET TYPE,
FREE REVERSE FLOW WITH CROSS-LINE PILOTS.
DESCRIPTION
This unit consists of two CBPS cartridges in an inline housing. The cartridges
are direct acting, screw in cartridge style, poppet type, adjustable, pilot as
as-
sisted, hydraulic counterbalance valves.
OPERATIONS
This valve controls moving load and preventing it from running ahead
of the pump, locking the load in any position, it also provides static
overload and thermal expansion protection.
This valve is a MODULATING DEVICE that allows free flow from port V1
to port C1 and V2 to C2 then blocks reverse flow until a pilot pressure
INVERSELY PROPORTIONAL to the load pressure is sensed at pilot ports
which are connected to ports V1 and V2 therefore modulating flow from
port C1 or port C2.
Reference: 520-P-080820-EN-00/09.2015
DCBS-10
DUAL COUNTERBALANCE VALVE POPPET TYPE,
FREE REVERSE FLOW WITH CROSS-LINE PILOTS.
SPECIFICATIONS
OPERATING PRESSURE: 5,000 PSI [350 Bar]
PROOF PRESSURE: 10,000 PSI [700 Bar]
FLOW: 20.0 GPM [76 L/M] nominal. See performance chart.
PILOT RATIO: 4 to 1
INTERNAL LEAKAGE: 5 drops/min @ 90% of crack pressure.^J
DEFINITION OF CRACK: evident at 0.06 GPM [0.25 LPM]
VALVE HOUSINGS: 2500 PSI [175 Bar] = Aluminum - Anodized.
5000 PSI [350 Bar] = Steel - Unplated.
OPERATING TEMPERATURE: -40° to +250° F. [-40° to +120° C.]
OPERATING MEDIA: All general purpose hydraulic fluids such as
MIL-H-5606, SAE-#10, SAE-#20, etc.
INSTALLATION: No restriction.
FILTRATION: 25 microns or better.
SEAL KIT NUMBER: SKN-1028 for buna "N".
SKV-1028 for viton.
WEIGHT: 2.65 lbs [1.21 kg] Aluminum. 5.25 lbs [2,38] Steel.
VALVE CAVITY: #C1025, See Page 0-022.0.
info.el@bucherhydraulics.com www.bucherhydraulics.com/commoncavity
© 2015 by Bucher Hydraulics, Inc., 2545 Northwest Parkway, Elgin, Illinois 60124, USA
All rights reserved.
The technical information in this catalog, may contain calculated figures (for reference only) and not actual performance data for this product.
Data is provided for the purpose of product description only, and must not be construed as warranted characteristics in the legal sense.
The information does not relieve users from the duty of conducting their own evaluations and tests. Because the products are subject to
continual improvement, we reserve the right to amend the product specifications contained in this catalogue.
Reference: 520-P-080820-EN-00/09.2015
DCBS-12
C1 C2
DUAL COUNTERBALANCE VALVE POPPET TYPE,
FREE REVERSE FLOW WITH SEALS ON PISTON V1 V2
1.67" V2
[42,4]
V1 V2
3.50"
[88,9]
C1 C2
1.90"
[48,3]
4.50" .81"
[114,3] [20,7]
5.00" 1.63"
[127] [41,3]
PRESSURE RANGE
SIZE 15 = 100 TO 1500 PSI
12 = 1.062"-12 UNF 30 = 300 TO 3000 PSI
PRESSURE DROP (
PSI BAR
FOR ADJUSTMENT CONTROL 0 10 20 30 40
OPTIONS SEE PAGE 0-050.0 G.P.M.(135 SUS)
Reference: 520-P-080830-EN-00/09.2015
DCBS-12
DUAL COUNTERBALANCE VALVE POPPET
TYPE, FREE REVERSE FLOW WITH SEALS ON PISTON.
DESCRIPTION
This unit consists of two CBPS cartridges in an inline housing. The cartridges
are direct acting, screw in cartridge style, poppet type, adjustable, pilot as
as-
sisted, hydraulic counterbalance valves.
OPERATIONS
This valve controls moving load and preventing it from running ahead
of the pump, locking the load in any position, it also provides static
overload and thermal expansion protection.
This valve is a MODULATING DEVICE that allows free flow from port V1
to port C1 and V2 to C2 then blocks reverse flow until a pilot pressure
INVERSELY PROPORTIONAL to the load pressure is sensed at pilot ports
which are connected to ports V1 and V2 therefore modulating flow from
port C1 or port C2.
FEATURES AND BENEFITS
Leakproof screw adjustment.
Adjustment screw can not be backed out of the valve.
Overset protection - spring can not go solid.
Hardened precision fitted poppet & cage provides reliable, long life.
A unibody adapter cage construction provides very reliable operation.
Seals on the pilot piston assures no interflow of fluid between port #2 and port #3.
All external carbon steel parts are plated for longer life against the elements.
Valve is available with screw, tamperproof, capped and handknob adjustments.
All cartridge valves are 100% functionally tested.
SPECIFICATIONS
OPERATING PRESSURE: 4,000 PSI [276 Bar]
PROOF PRESSURE: 10,000 PSI [700 Bar]
FLOW: 35.0 GPM [132 L/M] nominal. See performance chart.
PILOT RATIO: 4 to 1
INTERNAL LEAKAGE: 5 drops/min @ 90% of crack pressure.^J
DEFINITION OF CRACK: evident at 0.06 GPM [0.25 LPM]
VALVE HOUSINGS: 2500 PSI [175 Bar] = Aluminum - Anodized.
5000 PSI [350 Bar] = Steel - Unplated.
OPERATING TEMPERATURE: -40° to +250° F. [-40° to +120° C.]
OPERATING MEDIA: All general purpose hydraulic fluids such as
MIL-H-5606, SAE-#10, SAE-#20, etc.
INSTALLATION: No restriction.
FILTRATION: 25 microns or better.
SEAL KIT NUMBER: SKN-1228 for Buna "N".
SKV-1228 for Viton.
WEIGHT: 2.65 lbs [1,21 kg] Aluminum. 5.25 lbs [2,38] Steel.
VALVE CAVITY: #C1225, See Page 0-023.0.
info.el@bucherhydraulics.com www.bucherhydraulics.com/commoncavity
© 2015 by Bucher Hydraulics, Inc., 2545 Northwest Parkway, Elgin, Illinois 60124, USA
All rights reserved.
The technical information in this catalog, may contain calculated figures (for reference only) and not actual performance data for this product.
Data is provided for the purpose of product description only, and must not be construed as warranted characteristics in the legal sense.
The information does not relieve users from the duty of conducting their own evaluations and tests. Because the products are subject to
continual improvement, we reserve the right to amend the product specifications contained in this catalogue.
Reference: 520-P-080830-EN-00/09.2015
CBPG-08
1
COUNTERBALANCE VALVE POPPET TYPE WITH
3
FREE REVERSE FLOW & VENTED PISTON 2 V
TORQUE:
Steel = 35/40 Ft-Lb. [47/54 Nm]
Aluminum = 25/30 Ft-Lb. [34/41 Nm]
1.00"
[25,4]
HEX
1.62"
[41,1]
MAX
2.50"
3
[63,5]
1.63"
[41,4] 2
2.25"
[57,2]
BASIC
PRESSURE RANGE 400 27,6
PRESSURE DROP (
Reference: 520-P-080910-EN-00/09.2015
CBPG-08
COUNTERBALANCE VALVE POPPET TYPE WITH
FREE REVERSE FLOW & VENTED PISTON
DESCRIPTION
This unit is a DIRECT ACTING, SCREW IN CARTRIDGE STYLE,
POPPET TYPE, ADJUSTABLE, PILOT ASSISTED, HYDRAULIC
COUNTERBALANCE VALVE.
OPERATIONS
This valve controls moving load and preventing it from running ahead
of the pump, locking the load in any position, it also provides static
overload and thermal expansion protection.
This valve is a MODULATING DEVICE that allows free flow from port 2
to port 1 and then blocks reverse flow until a pilot pressure INVERSELY
PROPORTIONAL to the load pressure is sensed at port 3 modulating
flow from port 1 to port 2.
Reference: 520-P-080910-EN-00/09.2015
CBPG-08
COUNTERBALANCE VALVE POPPET TYPE WITH
FREE REVERSE FLOW & VENTED PISTON
SPECIFICATIONS
OPERATING PRESSURE: 5,000 PSI [350 Bar]
PROOF PRESSURE: 10,000 PSI [700 Bar]
FLOW: 10.0 GPM [38 L/M] nominal. See performance chart.
PILOT RATIO: 4 to 1
INTERNAL LEAKAGE: 5 drops/min @ 90% of crack pressure.^J
DEFINITION OF CRACK: evident at 0.06 GPM [0.25 LPM]
VALVE HOUSINGS: 2500 PSI [175 Bar] = Aluminum - Anodized.
5000 PSI [350 Bar] = Steel - Unplated.
OPERATING TEMPERATURE: -40° to +250° F. [-40° to +120° C.]
OPERATING MEDIA: All general purpose hydraulic fluids such as
MIL-H-5606, SAE-#10, SAE-#20, etc.
INSTALLATION: No restriction.
FILTRATION: 25 microns or better.
SEAL KIT NUMBER: SKN-0828 for buna "N".
SKV-0828 for viton.
WEIGHT: 0.30 lb [.14 kg] cartridge only.
VALVE CAVITY: #C0825, See Page 0-021.0.
info.el@bucherhydraulics.com www.bucherhydraulics.com/commoncavity
© 2015 by Bucher Hydraulics, Inc., 2545 Northwest Parkway, Elgin, Illinois 60124, USA
All rights reserved.
The technical information in this catalog, may contain calculated figures (for reference only) and not actual performance data for this product.
Data is provided for the purpose of product description only, and must not be construed as warranted characteristics in the legal sense.
The information does not relieve users from the duty of conducting their own evaluations and tests. Because the products are subject to
continual improvement, we reserve the right to amend the product specifications contained in this catalogue.
Reference: 520-P-080910-EN-00/09.2015
CBPG-10
1
COUNTERBALANCE VALVE POPPET TYPE,
3
WITH FREE REVERSE FLOW & VENTED PISTON 2 V
TORQUE:
Steel = 55/60 Ft-Lb. [74/81 Nm]
Aluminum = 35/40 Ft-Lb. [47/54 Nm]
1.06"
[27,0]
HEX
.315"[8,0] HEX.
1.75"
[44,5]
MAX.
2.75"
[69,8]
3
1.90"
[48,3]
2
2.50"
[63,5] 1
BASIC 27,6
P)
400
PRESSURE RANGE
SIZE 15 = 100 TO 1500 PSI
PRESSURE DROP (
Reference: 520-P-080920-EN-00/09.2015
CBPG-10
COUNTERBALANCE VALVE POPPET TYPE,
WITH FREE REVERSE FLOW & VENTED PISTON.
DESCRIPTION
This unit is a DIRECT ACTING, SCREW IN CARTRIDGE STYLE,
POPPET TYPE, ADJUSTABLE, PILOT ASSISTED, HYDRAULIC
COUNTERBALANCE VALVE.
OPERATIONS
This valve controls moving load and preventing it from running ahead
of the pump, locking the load in any position, it also provides static
overload and thermal expansion protection.
This valve is a MODULATING DEVICE that allows free flow from port 2
to port 1 and then blocks reverse flow until a pilot pressure INVERSELY
PROPORTIONAL to the load pressure is sensed at port 3 modulating
flow from port 1 to port 2.
Reference: 520-P-080920-EN-00/09.2015
CBPG-10
COUNTERBALANCE VALVE POPPET TYPE,
WITH FREE REVERSE FLOW & VENTED PISTON.
SPECIFICATIONS
OPERATING PRESSURE: 5,000 PSI [350 Bar]
PROOF PRESSURE: 10,000 PSI [700 Bar]
FLOW: 20.0 GPM [76 L/M] nominal. See performance chart.
PILOT RATIO: 4 to 1
INTERNAL LEAKAGE: 5 drops/min @ 90% of crack pressure.^J
DEFINITION OF CRACK: evident at 0.06 GPM [0.25 LPM]
VALVE HOUSINGS: 2500 PSI [175 Bar] = Aluminum - Anodized.
5000 PSI [350 Bar] = Steel - Unplated.
OPERATING TEMPERATURE: -40° to +250° F. [-40° to +120° C.]
OPERATING MEDIA: All general purpose hydraulic fluids such as
MIL-H-5606, SAE-#10, SAE-#20, etc.
INSTALLATION: No restriction.
FILTRATION: 25 microns or better.
SEAL KIT NUMBER: SKN-1028 for buna "N".
SKV-1028 for viton.
WEIGHT: 0.46 lb [.21 kg] cartridge only.
VALVE CAVITY: #C1025, See Page 0-022.0.
info.el@bucherhydraulics.com www.bucherhydraulics.com/commoncavity
© 2015 by Bucher Hydraulics, Inc., 2545 Northwest Parkway, Elgin, Illinois 60124, USA
All rights reserved.
The technical information in this catalog, may contain calculated figures (for reference only) and not actual performance data for this product.
Data is provided for the purpose of product description only, and must not be construed as warranted characteristics in the legal sense.
The information does not relieve users from the duty of conducting their own evaluations and tests. Because the products are subject to
continual improvement, we reserve the right to amend the product specifications contained in this catalogue.
Reference: 520-P-080920-EN-00/09.2015
CBPG-20M
V 2
COUNTERBALANCE VALVE POPPET TYPE, 3
WITH FREE REVERSE FLOW & VENTED PISTON. 1
1.06"
[27,0]
HEX
2.41"
[61,2]
2 1.36"
[34,5]
PSI BAR
FOR ADJUSTMENT CONTROL 0 5 10 15 20
OPTIONS SEE PAGE 0-050.0 G.P.M.(135 SUS)
Reference: 520-P-081320-EN-00/09.2015
CBPG-20M
COUNTERBALANCE VALVE POPPET TYPE,
WITH FREE REVERSE FLOW & VENTED PISTON.
DESCRIPTION
This unit is a DIRECT ACTING, SCREW IN CARTRIDGE STYLE,
POPPET TYPE, ADJUSTABLE, PILOT ASSISTED, HYDRAULIC COUNTERBALANCE VALVE.
OPERATIONS
This valve controls moving load and preventing it from running ahead
of the pump, locking the load in any position, it also provides static
overload and thermal expansion protection.
This valve is a MODULATING DEVICE that allows free flow from port 2
to port 1 and then blocks reverse flow until a pilot pressure INVERSELY
PROPORTIONAL to the load pressure is sensed at port 3 modulating out
flow from port 1 to port 2.
FEATURES AND BENEFITS
Leakproof screw adjustment.
Adjustment screw can not be backed out of the valve.
Overset protection - spring can not go solid.
Hardened precision fitted poppet & cage provides reliable, long life.
A unibody adapter cage construction provides very reliable operation.
Vented pilot piston spring chamber to atmosphere allows this valve
to be used with a re-generative circuit.
All external carbon steel parts are plated for longer life against the elements.
Valve is available with screw, tamperproof, capped and handknob adjustments.
All cartridge valves are 100% functionally tested.
Fits in to SUN cavity # T-11A.
SPECIFICATIONS
OPERATING PRESSURE: 5,000 PSI [350 Bar]
PROOF PRESSURE: 10,000 PSI [700 Bar]
FLOW: 20.0 GPM [76 L/M] nominal. See performance chart.
PILOT RATIO: 4 to 1
INTERNAL LEAKAGE: 5 drops/min @ 90% of crack pressure.^J
DEFINITION OF CRACK: evident at 0.06 GPM [0.25 LPM]
OPERATING TEMPERATURE: -40° to +250° F. [-40° to +120° C.]
OPERATING MEDIA: All general purpose hydraulic fluids such as
MIL-H-5606, SAE-#10, SAE-#20, etc.
INSTALLATION: No restriction.
FILTRATION: 25 microns or better.
SEAL KIT NUMBER: SKN-1029 for buna "N".
SKV-1029 for viton.
WEIGHT: 0.46 lb [.21 kg] cartridge only.
VALVE CAVITY: SUN # T-11A.
info.el@bucherhydraulics.com www.bucherhydraulics.com/commoncavity
© 2015 by Bucher Hydraulics, Inc., 2545 Northwest Parkway, Elgin, Illinois 60124, USA
All rights reserved.
The technical information in this catalog, may contain calculated figures (for reference only) and not actual performance data for this product.
Data is provided for the purpose of product description only, and must not be construed as warranted characteristics in the legal sense.
The information does not relieve users from the duty of conducting their own evaluations and tests. Because the products are subject to
continual improvement, we reserve the right to amend the product specifications contained in this catalogue.
Reference: 520-P-081320-EN-00/09.2015
CBPG-12
1
COUNTERBALANCE VALVE POPPET TYPE,
3
FREE REVERSE FLOW & SEALS ON THE PISTON 2 V
TORQUE:
Steel = 70/75 Ft-Lb. [95/102 Nm]
Aluminum = 55/60 Ft-Lb. [74/81 Nm]
1.31"
[33,3]
HEX
.315"[8,0] HEX.
1.96"
[49,8]
3.50"
[88,9]
2.33"
[59,2]
2
3.00"
[76,2] 1
BASIC
P)
400 27,6
PRESSURE RANGE
SIZE 15 = 100 TO 1500 PSI
PRESSURE DROP (
Reference: 520-P-080930-EN-00/09.2015
CBPG-12
COUNTERBALANCE VALVE POPPET TYPE,
WITH FREE REVERSE FLOW & VENTED PISTON
DESCRIPTION
This unit is a DIRECT ACTING, SCREW IN CARTRIDGE STYLE,
POPPET TYPE, ADJUSTABLE, PILOT ASSISTED, HYDRAULIC
COUNTERBALANCE VALVE.
OPERATIONS
This valve controls moving load and preventing it from running ahead
of the pump, locking the load in any position, it also provides static
overload and thermal expansion protection.
This valve is a MODULATING DEVICE that allows free flow from port 2
to port 1 and then blocks reverse flow until a pilot pressure INVERSELY
PROPORTIONAL to the load pressure is sensed at port 3 modulating
flow from port 1 to port 2.
Reference: 520-P-080930-EN-00/09.2015
CBPG-12
COUNTERBALANCE VALVE POPPET TYPE,
WITH FREE REVERSE FLOW & VENTED PISTON
SPECIFICATIONS
OPERATING PRESSURE: 4,000 PSI [276 Bar]
PROOF PRESSURE: 10,000 PSI [700 Bar]
FLOW: 35.0 GPM [132 L/M] nominal. See performance chart.
PILOT RATIO: 4 to 1
INTERNAL LEAKAGE: 5 drops/min @ 90% of crack pressure.^J
DEFINITION OF CRACK: evident at 0.06 GPM [0.25 LPM]
VALVE HOUSINGS: 2500 PSI [175 Bar] = Aluminum - Anodized.
5000 PSI [350 Bar] = Steel - Unplated.
OPERATING TEMPERATURE: -40° to +250° F. [-40° to +120° C.]
OPERATING MEDIA: All general purpose hydraulic fluids such as
MIL-H-5606, SAE-#10, SAE-#20, etc.
INSTALLATION: No restriction.
FILTRATION: 25 microns or better.
SEAL KIT NUMBER: SKN-1228 for Buna "N".
SKV-1228 for Viton.
WEIGHT: 0.84 lb [0,38 kg] cartridge only.
VALVE CAVITY: #C1225, See Page 0-023.0.
info.el@bucherhydraulics.com www.bucherhydraulics.com/commoncavity
© 2015 by Bucher Hydraulics, Inc., 2545 Northwest Parkway, Elgin, Illinois 60124, USA
All rights reserved.
The technical information in this catalog, may contain calculated figures (for reference only) and not actual performance data for this product.
Data is provided for the purpose of product description only, and must not be construed as warranted characteristics in the legal sense.
The information does not relieve users from the duty of conducting their own evaluations and tests. Because the products are subject to
continual improvement, we reserve the right to amend the product specifications contained in this catalogue.
Reference: 520-P-080930-EN-00/09.2015
DCBG-08
C1 C2
DUAL COUNTERBALANCE VALVE POPPET TYPE
WITH FREE REVERSE FLOW & VENTED PISTON V V1 V2 V
V2
1.12"
[28,4]
V1 V2
2.50"
[63,5]
C1 C2
1.37" 0.60"
[34,8] [15,2]
3.38" 1.20"
[85,9] [30,5]
3.75"
[95,3]
BASIC
PRESSURE RANGE
SIZE 15 = 100 TO 1500 PSI 400 27,6
PRESSURE DROP (
Reference: 520-P-081010-EN-00/09.2015
DCBG-08
DUAL COUNTERBALANCE VALVE POPPET TYPE WITH
FREE REVERSE FLOW & VENTED PISTON
DESCRIPTION
This unit consists of two CBPG cartridges in an inline housing.
The cartridges are direct acting, screw in cartridge style, poppet type,
adjustable, pilot assisted, hydraulic counterbalance valves.
OPERATIONS
This valve controls moving load and preventing it from running ahead
of the pump, locking the load in any position, it also provides static
overload and thermal expansion protection.
This valve is a MODULATING DEVICE that allows free flow from port V1
to port C1 and V2 to C2 then blocks reverse flow until a pilot pressure
INVERSELY PROPORTIONAL to the load pressure is sensed at pilot ports
which are connected to ports V1 and V2 therefore modulating flow from
port C1 or port C2.
Reference: 520-P-081010-EN-00/09.2015
DCBG-08
DUAL COUNTERBALANCE VALVE POPPET TYPE WITH
FREE REVERSE FLOW & VENTED PISTON
SPECIFICATIONS
OPERATING PRESSURE: 5,000 PSI [350 Bar]
PROOF PRESSURE: 10,000 PSI [700 Bar]
FLOW: 10.0 GPM [38 L/M] nominal. See performance chart.
PILOT RATIO: 4 to 1
INTERNAL LEAKAGE: 5 drops/min @ 90% of crack pressure.^J
DEFINITION OF CRACK: evident at 0.06 GPM [0.25 LPM]
VALVE HOUSINGS: 2500 PSI [175 Bar] = Aluminum - Anodized.
5000 PSI [350 Bar] = Steel - Unplated.
OPERATING TEMPERATURE: -40° to +250° F. [-40° to +120° C.]
OPERATING MEDIA: All general purpose hydraulic fluids such as
MIL-H-5606, SAE-#10, SAE-#20, etc.
INSTALLATION: No restriction.
FILTRATION: 25 microns or better.
SEAL KIT NUMBER: SKN-0828 for buna "N".
SKV-0828 for viton.
WEIGHT: 1 lb [0.4536 kg] Aluminum. 3.15 lbs [1.43 kg] Steel.
VALVE CAVITY: #C0825, See Page 0-021.0.
info.el@bucherhydraulics.com www.bucherhydraulics.com/commoncavity
© 2015 by Bucher Hydraulics, Inc., 2545 Northwest Parkway, Elgin, Illinois 60124, USA
All rights reserved.
The technical information in this catalog, may contain calculated figures (for reference only) and not actual performance data for this product.
Data is provided for the purpose of product description only, and must not be construed as warranted characteristics in the legal sense.
The information does not relieve users from the duty of conducting their own evaluations and tests. Because the products are subject to
continual improvement, we reserve the right to amend the product specifications contained in this catalogue.
Reference: 520-P-081010-EN-00/09.2015
DCBG-10
C1 C2
DUAL COUNTERBALANCE VALVE POPPET TYPE,
FREE REVERSE FLOW WITH VENTED PISTON V V
V1 V2
1.30" V2
[33,0]
V1 V2
3.00"
[76,2]
C1 C2
1.50"
.63"
[38,1]
[15,9]
3.63" 1.25"
[92,1] [31,8]
4.00"
[101,6]
PRESSURE RANGE
SIZE 15 = 100 TO 1500 PSI
10 = 7/8"-14 UNF 30 = 300 TO 3000 PSI
PRESSURE DROP (
PSI BAR
FOR ADJUSTMENT CONTROL 0 5 10 15 20
OPTIONS SEE PAGE 0-050.0 G.P.M.(135 SUS)
Reference: 520-P-081020-EN-00/09.2015
DCBG-10
DUAL COUNTERBALANCE VALVE POPPET TYPE,
FREE REVERSE FLOW WITH VENTED PISTON
DESCRIPTION
This unit consists of two CBPG cartridges in an inline housing.
The cartridges are direct acting, screw in cartridge style, poppet type,
adjustable, pilot assisted, hydraulic counterbalance valves.
OPERATIONS
This valve controls moving load and preventing it from running ahead
of the pump, locking the load in any position, it also provides static
overload and thermal expansion protection.
This valve is a MODULATING DEVICE that allows free flow from port V1
to port C1 and V2 to C2 then blocks reverse flow until a pilot pressure
INVERSELY PROPORTIONAL to the load pressure is sensed at pilot ports which are
connected to ports V1 and V2 therefore modulating flow from port C1 or port C2.
FEATURES AND BENEFITS
Leakproof screw adjustment.
Adjustment screw can not be backed out of the valve.
Overset protection - spring can not go solid.
Hardened precision fitted poppet & cage provides reliable, long life.
A unibody adapter cage construction provides very reliable operation.
Vented pilot piston spring chamber to atmosphere allows this valve
to be used with a re-generative circuit.
All external carbon steel parts are plated for longer life against the elements.
Valve is available with screw, tamperproof, capped and handknob adjustments.
All cartridge valves are 100% functionally tested.
Industry common cavity.
SPECIFICATIONS
OPERATING PRESSURE: 5,000 PSI [350 Bar]
PROOF PRESSURE: 10,000 PSI [700 Bar]
FLOW: 20.0 GPM [76 L/M] nominal. See performance chart.
PILOT RATIO: 4 to 1
INTERNAL LEAKAGE: 5 drops/min @ 90% of crack pressure.^J
DEFINITION OF CRACK: evident at 0.06 GPM [0.25 LPM]
VALVE HOUSINGS: 2500 PSI [175 Bar] = Aluminum - Anodized.
5000 PSI [350 Bar] = Steel - Unplated.
OPERATING TEMPERATURE: -40° to +250° F. [-40° to +120° C.]
OPERATING MEDIA: All general purpose hydraulic fluids such as
MIL-H-5606, SAE-#10, SAE-#20, etc.
INSTALLATION: No restriction.
FILTRATION: 25 microns or better.
SEAL KIT NUMBER: SKN-1028 for buna "N".
SKV-1028 for viton.
WEIGHT: 2.65 lbs [1.21 kg] Aluminum. 5.25 lbs [2,38] Steel.
VALVE CAVITY: #C1025, See Page 0-022.0.
info.el@bucherhydraulics.com www.bucherhydraulics.com/commoncavity
© 2015 by Bucher Hydraulics, Inc., 2545 Northwest Parkway, Elgin, Illinois 60124, USA
All rights reserved.
The technical information in this catalog, may contain calculated figures (for reference only) and not actual performance data for this product.
Data is provided for the purpose of product description only, and must not be construed as warranted characteristics in the legal sense.
The information does not relieve users from the duty of conducting their own evaluations and tests. Because the products are subject to
continual improvement, we reserve the right to amend the product specifications contained in this catalogue.
Reference: 520-P-081020-EN-00/09.2015
DCBG-12
C1 C2
DUAL COUNTERBALANCE VALVE POPPET TYPE,
FREE REVERSE FLOW WITH VENTED PISTON V V
V1 V2
1.67" V2
[42,4]
V1
V2
3.50"
[88,9]
C1 C2
1.90" .81"
[48,3] [20,7]
4.50" 1.63"
[114,3] [41,3]
5.00"
[127]
PSI BAR
FOR ADJUSTMENT CONTROL 0 10 20 30 40
OPTIONS SEE PAGE 0-050.0 G.P.M.(135 SUS)
Reference: 520-P-081030-EN-00/09.2015
DCBG-12
DUAL COUNTERBALANCE VALVE POPPET TYPE,
FREE REVERSE FLOW WITH VENTED PISTON
DESCRIPTION
This unit consists of two CBPG cartridges in an inline housing.
The cartridges are direct acting, screw in cartridge style, poppet type,
adjustable, pilot assisted, hydraulic counterbalance valves.
OPERATIONS
This valve controls moving load and preventing it from running ahead
of the pump, locking the load in any position, it also provides static
overload and thermal expansion protection.
This valve is a MODULATING DEVICE that allows free flow from port V1
to port C1 and V2 to C2 then blocks reverse flow until a pilot pressure
INVERSELY PROPORTIONAL to the load pressure is sensed at pilot ports which are
connected to ports V1 and V2 therefore modulating flow from port C1 or port C2.
FEATURES AND BENEFITS
Leakproof screw adjustment.
Adjustment screw can not be backed out of the valve.
Overset protection - spring can not go solid.
Hardened precision fitted poppet & cage provides reliable, long life.
A unibody adapter cage construction provides very reliable operation.
Vented pilot piston sprin chamber to atmosphere allows this valve
to be used with a re-generative circuit.
All external carbon steel parts are plated for longer life against the elements.
Valve is available with screw, tamperproof and capped adjustments.
All cartridge valves are 100% functionally tested.
SPECIFICATIONS
OPERATING PRESSURE: 4,000 PSI [276 Bar]
PROOF PRESSURE: 10,000 PSI [700 Bar]
FLOW: 35.0 GPM [132 L/M] nominal. See performance chart.
PILOT RATIO: 4 to 1
INTERNAL LEAKAGE: 5 drops/min @ 90% of crack pressure.^J
DEFINITION OF CRACK: evident at 0.06 GPM [0.25 LPM]
VALVE HOUSINGS: 2500 PSI [175 Bar] = Aluminum - Anodized.
5000 PSI [350 Bar] = Steel - Unplated.
OPERATING TEMPERATURE: -40° to +250° F. [-40° to +120° C.]
OPERATING MEDIA: All general purpose hydraulic fluids such as
MIL-H-5606, SAE-#10, SAE-#20, etc.
INSTALLATION: No restriction.
FILTRATION: 25 microns or better.
SEAL KIT NUMBER: SKN-1228 for buna "N".
SKV-1228 for viton.
WEIGHT: 2.65 lbs [1,21 kg] Aluminum. 5.25 lbs [2,38] Steel.
VALVE CAVITY: #C1225, See Page 0-023.0.
info.el@bucherhydraulics.com www.bucherhydraulics.com/commoncavity
© 2015 by Bucher Hydraulics, Inc., 2545 Northwest Parkway, Elgin, Illinois 60124, USA
All rights reserved.
The technical information in this catalog, may contain calculated figures (for reference only) and not actual performance data for this product.
Data is provided for the purpose of product description only, and must not be construed as warranted characteristics in the legal sense.
The information does not relieve users from the duty of conducting their own evaluations and tests. Because the products are subject to
continual improvement, we reserve the right to amend the product specifications contained in this catalogue.
Reference: 520-P-081030-EN-00/09.2015