Professional Documents
Culture Documents
MarkIV Horizontal Parts Book
MarkIV Horizontal Parts Book
ECN CS-1712 AFTER INSTALLING THE DOOR PLEASE FORWARD TO J9044039 Rev Z
JAMISON DOOR COMPANY THE MAINTENANCE DEPARTMENT OR OWNER. P/N 996543
THIS PAGE LEFT BLANK
1. Sufficient information must be included with all orders so that we can give prompt and accurate
service. The specific information needed includes:
a. The stock number, drawing number and name of the part
I. If possible give the stock number or drawing number of the part to be replaced.
b. The HIC and WIC of the door.
c. State whether the door is a bi-parting or single. If the door is a single state which direction it opens.
d. Finish
I. Galvanized (Galv), chrome (Chr), bright chrome (BChr), stainless steel (SST), or Tuffkote finish
(similar to gray paint). Other coatings may be available see the applicable parts lists for
information.
2. Parts highlighted in gray are no longer available.
Ref # Group Finish Offset Name of Part Stock No. Drawing No.
1 Track Support Angle Single Door LH 5’ 0” WIC 4404-204-02 4404-204
1 Track Support Angle Single Door RH 5’ 0” WIC 4404-204-52 4404-204
1 Track Support Angle Single Door LH 6’ 0” WIC 4404-204-03 4404-204
1 Track Support Angle Single Door RH 6’ 0” WIC 4404-204-53 4404-204
1 Track Support Angle Bi-Parting Door 6’ 0” WIC 4404-205-03 4404-205
1 Track Support Angle Single Door LH 7’ 0” WIC 4404-204-04 4404-204
1 Track Support Angle Single Door RH 7’ 0” WIC 4404-204-54 4404-204
1 Track Support Angle Bi-Parting Door 7’ 0” WIC 4404-205-04 4404-205
1 Track Support Angle Single Door LH 8’ 0” WIC 4404-204-05 4404-204
1 Track Support Angle Single Door RH 8’ 0” WIC 4404-204-55 4404-204
1 Track Support Angle Bi-Parting Door 8’ 0” WIC 4404-205-05 4404-205
1 Track Support Angle Single Door LH 10’ 0” WIC 4404-204-07 4404-204
1 Track Support Angle Single Door RH 10’ 0” WIC 4404-204-57 4404-204
1 Track Support Angle Bi-Parting Door 10’ 0” WIC 4404-205-07 4404-205
2 Flat Washer 13/16” x 13/32” x 13 GA 753-006
3 Bolt 3/8-16 x 1-3/4” 751-423
4 Track Stop Bumper 4404-287-01 4404-287
5 Screw Thread Form #10-24 x 1/2" 765-213
Note: See instruction sheet for ordering parts. Note if the track is one or two piece construction.
Ref # Group Finish Offset Name of Part Stock No. Drawing No.
1 Track Support Angle 5’0” WIC 4404-397-03 4404-397
1 Track Support Angle 5’6” WIC 4404-397-04 4404-397
1 Track Support Angle 6’0” WIC 4404-397-05 4404-397
1 Track Support Angle 7’0” WIC 4404-397-07 4404-397
1 Track Support Angle 8’0” WIC 4404-397-09 4404-397
1 Track Support Angle 9’0” WIC 4404-397-11 4404-397
1 Track Support Angle 10’0” WIC 4404-397-13 4404-397
2 Galv Hex Head Washer Screw 769-102
3 Track Stop Bumpers 4404-287-01 4404-287
4 Leading Edge Plastic Standard Ramp LH 931-024 4404-400
4** Leading Edge Plastic Short Ramp LH 931-054 4404-894
4 Leading Edge Plastic Standard Ramp RH 931-022 4404-398
4** Leading Edge Plastic Short Ramp RH 931-052 4404-892
5* Intermediate Track Piece #6
(Specify Length) (Single) XXX-XXX
5* Intermediate Track Piece #6
(Specify Length) (Bi-parting) XXX-XXX
6 Trailing Edge Plastic Standard Ramp LH 931-025 4404-401
6** Trailing Edge Plastic Short Ramp LH 931-055 4404-895
6 Trailing Edge Plastic Standard Ramp RH 931-023 4404-399
6** Trailing Edge Plastic Short Ramp RH 931-053 4404-893
7* Tail Track Piece #7 (Specify Length) (Single) XXX-XXX
7* Tail Track Piece #7 (Specify Length) (Bi-parting) XXX-XXX
8 Track Stop 486-153 4404-402
9 Screw Self Tap 3/8”-16 x 1-1/2” 765-405
10 Screw Thread form #10-24 x 1/2” 765-213
*Please specify the serial number of the door when ordering.
** Short Ramps are only to be used with pull bar.
Note: See instruction sheet for ordering parts.
ECN CS-1712 8 J9044039 Rev Z
JAMISON DOOR COMPANY Phone: (USA & Canada) 1-800-532-3667 (Int.) 301-733-3100 S/N 996543
5. CARRIER ASSEMBLY
Ref # Group Finish Offset Name of Part Stock No. Drawing No.
1 a Bolt 3/4”-10 X 6” 751-468
2 a Hanger Bracket (4” & 6” Door) 4404-007-01 4404-7
2A a Hanger Bracket (2” Door) 4404-541-01 4404-541
3 a Roll Pin 3/16” Dia. X 1” 754-022
4 a Hex Nut 3/4”–10 752-113
S.Assy. Hanger Sub-Assy.
(Consist of Items in Group (a)) 4404-021-01 4404-21
5 Galv Trolley Wheel Leading Edge 486-055
5 SST Trolley Wheel Leading Edge 486-060
5 Trolley Wheel Leading Edge
(Heat Treated for Steel Track) 486-090
6 Galv Trolley Wheel Trailing Edge 486-050
6 SST Trolley Wheel Trailing Edge 486-061
6 Trolley Wheel Trailing Edge
(Heat Treated for Steel Track) 486-091
7* Self Tapping Screw #10-24 X 3/8”
(MK III Steel Track Only) 765-309
8* Track Cleaner (MK III Steel Track Only) 4404-093-01 4404-93
9 Hex Jam Nut 3/4”–10 752-115
10 Ext. Tooth Lock Washer 3/4” 753-550
11 Hex Bolt Self Tapping 3/8”-16 X 1” 769-102
12 Spring Lock Washer 1/2” 753-505
13 Hex Bolt 1/2”–13 X 1” 751-438
14 Carrier Single 5’ 0” 4404-008-01 4404-8
14 Carrier Single 6’ 0 “ 4404-008-02 4404-8
14 Carrier Bi-Parting 6’ 0” 4404-008-31 4404-8
14 Carrier Single 7’ 0” 4404-008-03 4404-8
14 Carrier Bi-Parting 7’ 0 “ 4404-008-32 4404-8
14 Carrier Single 8’ 0” 4404-008-04 4404-8
14 Carrier Bi-Parting 8’ 0 “ 4404-008-33 4404-8
14 Carrier Single 10’ 0” 4404-008-06 4404-8
14 Carrier Bi-Parting 10’ 0” 4404-008-35 4404-8
15 Trolley Wheel Spacer 486-048
* Specify Door Thickness
Note: See instruction sheet for ordering parts. Specify whether the door is single or bi-parting and give the WIC.
ECN CS-1712 9 J9044039 Rev Z
JAMISON DOOR COMPANY Phone: (USA & Canada) 1-800-532-3667 (Int.) 301-733-3100 S/N 996543
6. CHAIN LOCK
Ref # Group Finish Offset Name of Part Stock No. Drawing No.
Assy. SST Complete Stay Roller Assy.
(For Use When Stay Roller is Located in Freezer) 4404-732-01 4404-732
Assy. SST Complete Stay Roller Assy. Standard 4404-019-02 4404-19
1 Hex Bolt 3/8”–16 x 2-1/2” 751-514
2 Flat Washer 1-1/16” x 33/64” x 13 GA 753-155
3 Wheel Only (Cooler) 486-051
3 Wheel and Spindle (Freezer) 486-062
4 Flat Washer 13/16” x 13/32” x 13 GA 753-169
5 SST Stay Roller Bracket 4404-017-02 4404-17
6 Hex Lock Nut 3/8”–16 752-205
7* Anchor Bolt 1/2” x 3-3/4” 759-022
8 Spindle (Cooler) 486-063
*Item is not included in assembly.
Note: See instruction sheet for ordering parts.
Ref # Group Finish Offset Name of Part Stock No. Drawing No.
Assy. Galv Heavy Duty Stay Roller 4404-694-01 4404-694
Assy. SST Heavy Duty Stay Roller 4404-694-02 4404-694
1 Galv Bracket 4404-696-01 4404-696
1 SST Bracket 4404-696-02 4404-696
2 Galv Mounting Plate 4404-695-01 4404-695
2 SST Mounting Plate 4404-695-02 4404-695
3 SST Flat Washer 13/16” x 13/32” x 13 GA 753-169
4 SST Hex Head Mach Bolt 3/8-16 x 2-1/2” 751-514
5 Hex Head Mach Bolt 3/8-16 x 1-1/4” (Zn Plated) 751-421
6 Hex Nut Nylock 3/8-16 (Zn Plated) 752-205
7 SST Bushing Tube 486-063
8 Polyolefin Wheel 486-051
Note: See instruction sheet for ordering parts.
Ref # Group Finish Offset Name of Part Stock No. Drawing No.
Assy Stay Wedge Assy Painted Yellow (For 4” Thick Door) 4404-923-01 4404-923
Assy SST Stay Wedge Assy. (For 4” Thick Door) 4404-923-02 4404-923
Assy Stay Wedge Assy Painted Yellow (For 6” Thick Door) 4404-923-21 4404-923
Assy SST Stay Wedge Assy (For 6” Thick Door) 4404-923-22 4404-923
*Kit Stay Wedge Assy Painted Yellow (For 4” Thick Door)
Retrofit Kit (Floor Mount Only) 4404-923-31 4404-923
*Kit SST Stay Wedge Assy (For 4” Thick Door)
Retrofit Kit (Floor Mount Only) 4404-923-32 4404-923
*Kit Stay Wedge Assy Painted Yellow (For 6” Thick Door)
Retrofit Kit (Floor Mount Only) 4404-923-33 4404-923
*Kit SST Stay Wedge Assy (For 4” Thick Door)
Retrofit Kit (Floor Mount Only) 4404-923-34 4404-923
1 Bracket Painted Yellow (For 4” Thick Door) 4404-924-01 4404-924
1 SST Bracket (For 4” Thick Door) 4404-924-02 4404-924
1 Bracket Painted Yellow (For 6” Thick Door) 4404-924-21 4404-924
1 SST Bracket (For 6” Thick Door) 4404-924-22 4404-924
2 Wedge 931-029 4466-080
3 Threaded Stud 5/16 x 3/4” 769-301
4 SST Flat Washer 3/4 x 11/32 x 16 Ga 753-005
5 Hex Nut 5/16-18 752-105
6 Lock Washer Split 3/8” 753-503
**7 Hex Taptite 3/8-16 x 1 769-102
*8 Hex Head Machine Screw 1/4-20 x 1-1/2” 751-405
*9 Flat Washer 5/8” x 9/32” x 16 GA 753-002
*10 Expansion Shield 759-031
*Used for retrofits
**Used for non-retrofits
Note: See instruction sheet for ordering parts. When retrofitting a bi-parting door with stay brackets a RH and LH
kit should be ordered.
Ref # Group Finish Offset Name of Part Stock No. Drawing No.
Assy. Complete Idler Assy. 4404-033-01 4404-33
1 Sprocket Bracket 4404-036-01 4404-36
2 Sprocket Mounting Bracket 4404-031-01 4404-31
3 Idler Adjustment Bracket 4404-030-01 4404-30
4 Idler Bearing 481-016
5 Idler Sprocket 203-019
6 Idler Spring 559-101
7 Spacer 4287-033-01 4404-33
8 Plate 4404-228-01 4404-228
9 Carriage Bolt 1/2”-13 x4” 751-030
10 Hex Lock Nut 3/8”–16 752-205
11 Hex Bolt 3/8”-16 x 1-1/4” 751-421
12 Hex Lock Nut 1/2”–13 752-207
13 Hex Bolt 3/8”-16 x 1” 751-420
14 Hex Bolt 3/8”–16 x 1” Taptite 769-102
15 Flat Washer 1-3/4” x 13/32” x 1/8” 753-022
16 Flat Washer 1-3/8” x 9/16” x 20 GA 753-019
17 Split Lock Washer 3/8” 753-504
18 Hex Bolt 3/8”–16 x 1-1/2” 751-422
Note: See instruction sheet for ordering parts.
Ref # Group Finish Offset Name of Part Stock No. Drawing No.
Assy. Complete Control Panel Assy.
(Give Model Number & Serial Numbers)
(Specify NEMA 1, 3, 4, 4X or 12) 4390-238-XX 4390-238
*1 Housing – NEMA 3, 4 or 12 191-037
1 Housing – NEMA 1 486-117
1 Housing – NEMA 4X 191-040
2 Mounting Plate 4390-237-01 4390-237
3 Baffle 4390-122-01 4390-122
4 Transformer (240/480 Primary – 24 Volt Secondary) 115-106
5 Transformer
(120/208/380 Primary – 24 Volt Secondary) 115-107
6 Fuse FNM-2 116-103
7 Reversing Contactor 111-037
8 Brass Cup Washer 753-905
9 Marker Strip 191-508
10 Terminal Strip 191-505
11 Stop Switch 113-108
12 Relay 111-029
13 Pilot Light (120V or 240V) 4290-073-01 4290-73
13 Pilot Light with Resister –(480V) 4290-073-03 4290-73
14 Time Delay 111-227
15 Termostst (80°) Optional 114-005
16 Heater (20 Watt) Optional 4369-044-01 4369-44
*17 Rubber Washer 11/16” X 9/32” X 1/16” 559-026
18 Self Tapping Screw #6-32 X 3/8” 765-303
19 Self Tapping Screw #6-32 X 1/2” 765-304
20 Self Tapping Screw #6-32 X 5/8” 765-305
21 Self Tapping Screw #8-32 X 3/8” 765-306
22 Round Head Machine Screw #10-32 X 3/8” 764-136
23 Self Tapping Screw #10-24 X 1/2” 765-310
24 Dual Speed Adder Block 111-040
Note: See instruction sheet for ordering parts.
COMPLETE CONTROL PANEL ASSEMBLY (ACTIVE MODEL NUMBERS) (ALSO SPECIFY NEMA 1, 4, OR 4X)
STANDARD SPEED…………………………………………… 4390-436-XX
COMPLETE CONTROL PANEL ASSEMBLY (ACTIVE MODEL NUMBERS) (ALSO SPECIFY NEMA 1, 4, OR 4X)
STANDARD SPEED 575 VOLT…………………………………4390-457-XX
OPTIONAL KITS AVAILABLE
CONTROL PANEL HEAT……………………………………….. H4390-444
FLOOR LOOP………………………………………………….. H4390-425
RADIO CONTROL……………………………………………… H4390-424
TIME DELAY …………………………………………………….. H4390-227
COMPLETE CONTROL PANEL ASSEMBLY (ACTIVE MODEL NUMBER) (ALSO SPECIFY NEMA 1, 4, OR 4X)
DAUL SPEED………………………………………….……….… 4390-440-XX
COMPLETE CONTROL PANEL ASSEMBLY (GIVE MODEL NUMBER & SERIAL NUMBERS)
(ALSO SPECIFY NEMA 1, 4, OR 4x)
-DUAL SPEED 575 V……………………....4390-458-xx
A. NEMA 1 APPLICATION
NOTES:
NOTES:
1. Optional component
2. For fuse requirement please see the fuse replacement label within the control panel or contact the factory.
NOTES:
1. Optional component
2. For fuse requirement please see the fuse replacement label within the control panel or contact the factory.
Ref # Group Finish Offset Name of Part Stock No. Drawing No.
Assy. Complete WPS Switch (W/o Heat) 113-218
Assy. Complete WPS Switch (W/ Heat) 113-219
1 Pull Cord Rope W/ Tassel (Not Shown) 4285-059-02 4285-59
1 Pull Cord Rope Vinyl 60’ (Not Shown) 4285-049-01 4285-49
Note: See instruction sheet for ordering parts.
Ref # Group Finish Offset Name of Part Stock No. Drawing No.
S Assy. Complete Sub-Assy. (W/ Thru-Door Operator)
(4” Door) (1,2,3A,4,5,7) 4404-417-01 4404-417
S Assy. Complete Sub-Assy. (for RH Leaf Bi-Part)
(4” Door) (1,3B,4,7) 4404-417-02 4404-417
S Assy. Complete Sub-Assy. (W/ Thru-Door Operator)
(6” Door) 4404-417-03 4404-417
1 Cable Boss 486-156
2 Push Nut 752-502
3A Washer (Thru-Door Operator) 4404-388-01 4404-388
3B Stub Shaft/Washer 4404-410-01 4404-410
4 Pop Rivet 755-365
5 Back Handle Sub-Assy. (4” Door) 486-155
5A Back Handle Sub-Assy. (2” Door) 4404-542-01 4404-542
5B Back Handle Sub-Assy. (6” Door) 4404-527-01 4404-527
6* Disconnect Cable (Advise H.I.C., Date of Mfg and
Handle) 204-325 4404-418
7 Set-Screw 767-131
8 Vinyl Cable End Cap 191-351
9 “Turn Handle For Manual Release” Label 996-040
Note: See instruction sheet for ordering parts.
Ref # Group Finish Offset Name of Part Stock No. Drawing No.
Assy. Complete Assy. (When Ordering Specify Door
Model, Serial Number, Size and Slide) 4404-420-XX 4404-420
1 Outer Gasket Wrapper (.035 X 5”) (HIC + 1/2”)
(Specify Length Required) 552-165
2 Inner Wrapper (.04 X 3- 3/8”) (Ripstop Nylon)
(HIC –3-1/2”) 552-166
3 Switch 113-113
4 Bushing 559-041
5 Hose (Specify Length Required) 559-100
6 End Plug (to be Glued in Place) 4390-167-01 4390-167
7 Plug 4404-855-01 4404-855
8 Sub Base (Specify Length) 4404-757-XX
Note: See instruction sheet for ordering parts.
Ref # Group Finish Offset Name of Part Stock No. Drawing No.
Assy. Complete Assy. (Items 3, 4, & 5 Not Included) H4475-009 4475-9
1 Oilite Bearing 481-318
2 Shaft Collar 489-402
3 Taptite, Hex Head 5/16” X 1 769-105
4 Taptite, Hex Head 3/8” X 1 769-102
5 Opener Bracket 4475-001-01 4475-1
6 Oilite Bearing Modified 4475-004-01 4475-4
7 Bottom Bracket 4475-006-01 4475-6
8 Top Bracket 4475-007-01 4475-7
9 Handle Assy. 4475-008-01 4475-8
Note: See instruction sheet for ordering parts.