Professional Documents
Culture Documents
FDR Go (DR-ID800) Keyless Option - M503-E054
FDR Go (DR-ID800) Keyless Option - M503-E054
FDR Go (DR-ID800) Keyless Option - M503-E054
Jan. 2013
Operation Manual
(For Password administration)
Read the instruction manual thoroughly before you use the product.
Keep this instruction manual for future reference.
Precautions in Use
Throughout the text in this manual, warnings and other information essential when using this unit, such as
cautionary or prohibited items, appear classified as per the following:
Mark Description
Emphasizes additional information that is provided to ensure the proper use of this
product.
Preface
Thank you for purchasing the FDR Go (hereafter referred to as "equipment").
This operation manual contains information for ensuring proper use of the
equipment. Read this manual thoroughly before using the equipment and
operate the equipment in accordance with the instructions in this manual. If
the precautions in this manual are disregarded, there is risk of damage to
equipment or injury to operators and patients. However, it is not possible to
foresee all risks and provide precautions for each of them. Therefore, when
using the equipment in ways not described in this manual or when any
question arises in the manual description, please contact the place of
purchase or a sales representative listed at the end of this manual.
This manual should be kept available for future reference. If the user or
usage location changes, ensure that this operation manual is always kept
together with the equipment. Periodically check to be sure that the operation
manual and the warning labels are not missing or damaged. If they are,
contact your service representative for replacement.
Original version is approved in English.
Notice
• All copyrights regarding this manual are property of Shimadzu
Corporation.
Neither all nor part of these contents shall be reproduced or duplicated
without the express permission of Shimadzu Corporation.
• Content of this manual may be changed for improvement without notice.
Although every possible effort has been made to avoid errors while
creating this manual, immediate revision may not be possible in the
event that errors or missing information are detected.
• Screen images and illustrations contained in this manual may differ from
those in actual use, and are intended for example purposes only.
Illustrations may also use partial images.
• FDR Go is registered trademarks of Shimadzu Corporation in the United
States and Europe (Office for Harmonization in the Internal Market).
• Other company names and product names mentioned in this manual are
trademarks or registered trademarks of their respective companies.
• The TM and ® symbols are omitted in this manual.
3.1 Confirming and changing each User Setting data ................. 3-2
Chapter Contents
1.1 Overview
1.1 Overview
This manual is FDR Go Keyless Entry Option Operation Manual for password administration. Follow
this manual, register and change, eliminate the password for general users.
When the equipment supply, the password for general users is not registered.
Follow this manual, register the password for general users.
Chapter Contents
Numeric Keypad
4) After the correct password is entered, electric travel, radiography and the DR
system are enabled.
1) After start up with the password for administration, press (User Settings
Button)for about 1 second, [uSr][oPe] is displayed on X-ray control panel for 1
second, enter User Settings Mode.
3) When the personal ID number you want to set is displayed, press Remote
Controller Button to display password.
・In the case of no password registered, [P ][ ] is displayed.
・When the password was registered , [P 1][234](when the password is
1234)is displayed.
4) Press Numeric Keypad of Anatomical Program on X-ray control panel to input the
4-digit password.
When the password was registered, the password is overwritten. Press Numeric
Delete Button of Anatomical Program on X-ray control panel 4 times to delete the
password, then[E o][ooo]is displayed.
Chapter Contents
After start up with the password for administration, not only setting the password of
general users, confirming and changing User Setting data of each personal ID is
enabled.
After start up with the password of general users, enter User Setting Mode, the
personal ID is not displayed.
After start up with the password of administration, enter User Setting Mode, the
personal ID is displayed. Press mAs[+] button,mAs[-] button and change the
personal ID number, confirming and changing User Setting data of the personal ID
selected is enabled.