Professional Documents
Culture Documents
DS YL140P-17b EU EN 201109 v01
DS YL140P-17b EU EN 201109 v01
YL135P-17b
SERIES YL130P-17b
YL125P-17b
YL120P-17b
PERFORMANCE
- High efficiency, polycrystalline solar cells with high transmission and
textured glass delivering a module efficiency of up to 13.5%,
minimizing installation costs and maximizing the kWh output of your
system per unit area.
- Power tolerance of +/-3% minimizing PV system mismatch losses.
YINGLISOLAR.COM
YGE 135 SERIES
ELECTRICAL PERFORMANCE GENERAL CHARACTERISTICS
Electrical parameters at Standard Test Conditions (STC) Dimensions (length / width / height) 1470mm / 680mm / 35mm
Module name YGE 140 YGE 135 YGE 130 YGE 125 YGE 120 Weight 11.8 kg
Module type YL140P-17b YL135P-17b YL130P-17b YL125P-17b YL120P-17b
Voltage at Pmax Vmpp V 18.0 17.6 17.6 17.5 17.5 Packaging box dimensions
1500mm / 710mm / 100mm
Current at Pmax Impp A 7.77 7.67 7.38 7.14 6.90 (length / width / height)
Open-circuit voltage Voc V 22.5 22.3 22.1 22.0 22.1
Short-circuit current Isc A 8.40 8.20 8.05 7.89 7.60
STC: 1000W/m2 irradiance, 25°C Tmodule, AM 1.5g spectrum according to EN 60904-3.
Ave. efficiency reduction of 5% at 200W/m2 according to EN 60904-1.
Unit: mm
Electrical parameters at Nominal Operating Cell Temperature (NOCT)
680
Power output Pmax W 101.7 98.0 94.4 90.8 87.1 646 35
Voltage at Pmax Vmpp V 16.2 16.1 16.1 16.0 15.9
Current at Pmax Impp A 6.26 6.11 5.87 5.69 5.49 37
Open-circuit voltage Voc V 20.6 20.4 20.2 20.1 20.2
Short-circuit current Isc A 6.80 6.64 6.52 6.39 6.16
NOCT: open-circuit module operation temperature at 800W/m2 irradiance, 20°C Tambient, 1m/s wind speed.
THERMAL CHARACTERISTICS
Nominal operating cell temperature NOCT °C 46 +/- 2
1470
%/°C -0.45 2-Ø6
870
Grounding
Temperature coefficient of Voc β Vo c %/°C -0.37 holes
4-6.5X8
OPERATING CONDITIONS Mounting slots
Limiting reverse current Do not apply external voltages larger than Voc of the module
A
Operating temperature range -40 to 85°C
Hailstone impact
25mm / 23m/s
(hailstone diameter / impact velocity)
SECTION A–A
35
CONSTRUCTION MATERIALS
Front cover (material / thickness) low-iron tempered glass / 3.2mm
Frame (material / color / anodization color) anodized aluminum alloy / silver / clear
Warning: Read the installation manual in its
entirety before handling, installing, and operating
Yingli Solar module.
• Due to continuous innovation, research and product improvement, the specifications in this product
information sheet are subject to change without prior notice. The specifications may deviate slightly and Our Partners:
are not guaranteed.
• The data do not refer to a single module and they are not part of the offer, they only serve for
comparison to different module types.
YINGLISOLAR.COM
© Yingli Green Energy Holding Co. Ltd. DS_YL135P-17b_EU_EN_201105_v01