Professional Documents
Culture Documents
MiniLink TN Configuration PDF
MiniLink TN Configuration PDF
1. Basic NE Configuration
Go to NE Configure Basic NE
Detail:
Detail:
Set ‘Automatic Backup’= ‘to remote ftp server’ from drop down list
PM Start Time
Detail:
2. DCN Configuration
Go to NE Configure DCN
FTP Settings (To enable NE automatic backup and export of error logs)
Detail:
Radio ID Change
Detail:
Open the ‘Configure Radio Link’ window and launch the far end as well
Tx Power Setting
Detail:
Check the link transmit power, RSL and frequency from LB.
Check the ‘Output Power Mode’ settings. It should be ATPC for all 11GHz link
and RTPC for all other frequencies or stated otherwise in LB. LB must be
consulted for mode conformation.
‘Output Power’ should be set to max. allowable limit. Change the limit
accordingly.
Note down the link if ‘Target Input Power’ configuration is not as above. No
changes should be done.
Frequency Check
In case of frequency conflict, no activity needs to be performed. Please note
down the link.
Detail:
Set ‘RF Input alarm threshold’= 8dBm less than design RSL.
4. Switch Configuration