Professional Documents
Culture Documents
Renderoc Plaster
Renderoc Plaster
Renderoc Plaster
Renderoc Plaster
Cement based ready mixed plaster
After leveling, let the product dry before finishing it with a synthetic
Uses sponge.
Advantages
Properties
Non shrink polymer modified premixed plaster.
Suitable for internal and external applications even on walls or Appearance: Grey powder
ceilings on the following substrates: M/V of powder: 1.52±0.1
Concrete blocks, bricks, etc… Grain Size : up to1.0 mm
Fair faced concrete Composition: Portland cement selected
Prefabricated concrete sand additives
Traditional cementitious plaster Wet mix life: <1hrs
Can be applied by toweling or spray machine. Application Thickness: 1mm-30mm
Low permeability to water.
Available in many colors.
Cost effective and time saving. Standards compliance
Easy to apply single component required only addition of water. BS 5262:1991, BS 5492 : 1990, BS 4551 part 2 :
1998, ASTM C 150, ASTM C926, ASTM C 897.
Description
Important note:
Fosroc products are guaranteed against defective materials and manufacture and are sold subject to its standard Conditions
for the Supply of Goods and Services, copies of which may be obtained on request. W hilst Fosroc endeavours to ensure that
any advice, recommendation, specification of information it may give is accurate and correct, it cannot, because it has no direct
or continuous control over where or how its products are applied, accept any liability either directly or indirectly arising from the
use of its products, whether or not in accordance with any advice, specification, recommendation of information given by it.
Fosroc Jordan
P.O.Box 253,
King Abdullah II Industrial State
Sahab 11512, Jordan
www.fosroc.com telephone: fax: email:
+962 (6) 5359562 +962 (6) 5359563 infojordan@fosroc.com