Professional Documents
Culture Documents
Eaton Airflex
Eaton Airflex
Eaton Airflex
Airflex
Airflex® clutches and brakes
were the first to feature
drum type design for de-
manding oil industry applica-
tions. That was more than 40
years ago when they were
known as Fawick Airflex
clutches.
Cool-running, rugged and ver-
satile, Airflex clutches and
brakes are used in oil explora-
tion, production and transport
—performing productively in drill-
ing platforms, drawworks, jack-
up rigs, semi-submersible drilling
rigs, drill ships, tankers, pipe-laying
barges and service boats.
Ariflex clutches, brakes, rotorseals,
and quick release valves are manufac-
tured and sold by Eaton Corporation and
distributed by Mid-Continent Supply Co.
Capacities 1,000 to 760,000 Ib. in.; VC ven-
tilated models to 16,000,000 Ib. in. Single,
dual and triple passage rotorseals, quick
release valves and mufflers.
F:T
1894
Airflex
CB ELEMENT ASSEMBLY
D2 .
SIZES 4 TO 14
D25
/ -O 4 PIPE TAP
—
r^l /
^ J, /
k*y«dBB**»i
jEggjggfjgj^jfc —
NOTES:
© Refers to basic parts list number only. When ordering, !
number of air inlets and type of connection must be
specified. V- — W—
(2) The torque rating in each application is dependent upon
applied air pressure and operating speed.
® Tolerance +.000
-.005
(4) Drum diameter is nominal inch size; i.e., h7 I
12CB350 Drum = 12.000 +.000
-.010
© 4CB200 available with one air inlet. All other sizes avail-
able with either one or two air inlets. -ft I
I
4CB200 145840 1,000 2.625 1.375 .094 7.248 6.688 4.125 6.688 8 .250 .250 1/8-27 22.500 5.813 .375 e 2.000
6CB200 145095 2,040 2.938 1.563 .094 10.752 10.000 6.156 10.000 a .375 .313 3/8-18 22.500 9.063 .563 6 2.000
8CB250 145096 4,290 3.438 1.906 .094 12.875 12.125 8.156 12.125 8 .375 .313 3/8-18 22.500 11.188 .563 8 2.500
10CB300 145097 8,150 4.125 2.000 .188 15.373 14.625 10.125 14.625 12 .375 .313 3/8-18 15.000 13.625 .688 10 3.000
12CB350 145098 13,300 4.719 2.000 .188 17.625 16.875 12.125 16.875 14 .375 .313 3/8-18 12.857 15.875 .688 12 3.500
14CB400 145087 19,700 5.219 2.000 .188 19.626 18.875 14.125 18.875 16 .375 .313 3/8-18 11.250 17.875 .688 14 4.000
NOTES: RECOM-
TORQUE NORMAL MAX.
@ Torque rating in each application is dependent upon FRICTION MENDED
BATING WEIGHT WK2 TUBE RECOM
SIZE AREA AIRFLEX
applied air pressure and operating speed. (LB. - INS.) (LBS.I (LB.-FT2) VOLUME MENDED
(IN?) ROTORSEAL
AT75PSI a (IN?) RPM ® SIZE
© Maximum RPM is dependent upon operating conditions
4CB200 1,000 2.5 .2 23 4 1800 8-2
and varies for each application. Consult factory for applica-
tions exceeding these speeds. 6CB200 2,040 7 1 36 12 1800 B-2
For installation, operation and maintenance instruc- 8CB250 4.290 9 2 61 18 1800 B-2
tions, request Form CB4000. 10CB300 8,150 19 6 91 27 1800 B-2
For application information, request Form AE 100.04. 12CB350 13,300 26 11 128 43 1800 B-2
IMPORTANT: Warranties are void on all applications 14C6400 19,700 31 17 170 27 1800 B-2
which exceed these specifications. For new applica-
tions, Eaton accepts no responsibility and extends
no warranty unless it has approved the application
in advance.
All rotating equipment must be protected to comply
with OSHA standards.
COMPENSATING
AIR PRESSURE
TO OVERCOME
CENTRIFUGAL 40
FORCE q
W 3°
CL
9 10 11
RPMX10" 2
1895
Airflex
CB ELEMENT ASSEMBLY
SIZES 12 TO 45 -Q4 PIPE TAP
NOTES:
(D Refers to basic parts list number only. When ordering,
number of air inlets and type of connection must be specified
@ The torque rating in each application is dependent upon
applied air pressure and operating speed.
© Tolerance: 12 and 14 .000 16 thru 24 +
-.005 "-.008
26 thru 32 +-00° 36 thru 45 + -°°°
— .01 0 — .01 u
Drum diameter is nominal inch size; i.e.,
H7
1 2CB350 Drum = 12.000 + •00°
- .010
12CB350 and 14CB400 available with one or two air inlets.
All other sizes available with one, two or four air inlets.
10 degrees tor elements with one air inlet, 15 degrees for
elements with two or four air inlets.
TORQUE DIMENSIONS IN INCHES
RATING
SIZE PART NO. L (BOLT) w
®
(IB. INS.)
AT75PSKX)
D2 024 02i G
®
H2
% H7
NO. SIZE % °<<s>
0
(DEC.)
0, V
NO. WIDTH
12CB350 145098 13,300 4.875 2.000 .188 17.625 16.875 12.125 16.875 14 3/8 .313 3/8-18 12857 15.875 .688 12 3.500
14CB400 145087 19,700 6.375 2.000 .188 19.625 18.875 14.125 18.875 16 3/8 .313 3/8-18 11.250 17.875 .688 14 4.000
16CB500 145211 35,200 6.625 2.500 .188 23.500 22.500 16.188 22.250 8 1/2 .375 3/8-18 22.500 20.750 .813 10 5.000
18CB500 145264 44,000 6.625 2.500 .188 25.500 24.375 18.188 24.375 12 1/2 .375 3/8-18 15.000 22.750 .813 11 5.000
20CB500 145265 53,600 6.625 2.500 .188 27.500 26.375 20.188 26.375 12 1/2 .375 3/8-18 15.000 24.750 .813 12 5.000
22CB500 145266 62,300 6.625 2.500 .188 29.500 28.375 22.188 28.375 12 1/2 .375 3/8-18 15.000 26.750 .813 13 5.000
24CB500 145267 75,000 6.625 2.500 .188 31.500 30.375 24.188 30.375 16 1/2 .375 3/8-18 11.250 28.750 .813 14 5.000
26CB525 145268 92,400 6.938 2.500 .250 34.000 32.750 26.188 32.500 16 5/8 .500 1/2-14 11.250 31.000 .844 16 5.250
28CB525 145269 106,000 6.938 2.500 .250 36.000 34.750 28.188 34.500 16 5/8 .500 1/2-14 11.250 33.000 .844 17 5.250
30CB525 145270 121,000 6.938 2.500 .250 38.000 36.750 30.188 36.500 16 5/8 .500 1/214 11.250 35.000 .844 18 5.250
32CB525 145271 137,000 6.938 2.500 .250 40.000 38.750 32.188 38.500 18 5/8 .500 1/2-14 ® 37.000 .844 19 5.250
36CB525 145272 172,000 6.938 2.750 .250 44.625 43.125 36.188 43.250 18 3/4 .625 3/4-14 ® 4 .563 .844 22 5.250
40CB525 145273 211,000 6.938 2.750 .250 48.625 47.125 40.188 47.250 20 3/4 .625 3/4-14 9.000 45.563 .844 24 5.250
45CB525 145081 260,000 6.938 2.750 .281 53.625 52.125 45.188 52.250 24 3/4 .625 3/4-14 7.500 50.688 .844 27 5.250
All rotating equipr•pent mus t be protected to comply 30CB525 121,000 148 303 458 79 950 C-2
with OSHA stand ards. 32CB525 137,000 157 359 483 84 900 C-2
36CB525 172,000 178 510 550 91 810 C-2
40CB525 211,000 201 730 610 101 740 3/4 RH
60
COMPENSATIIMG j [
4>^i_/»4fC
1 |
AIR PRESSURE
TO OVERCOM E 5
°
I
,0° £
^ / rtf
CENTRIFUGAL ,* ,V /
^ ^
^
40
y / l
Wi
>~ /
^/ / /
^-^
*^•-' ^•^
/' ^
FORCE .? rt
%-
d If /f ^ //, '//
/„'
/ ^
/ ,/
^ Y^' ^ ^f
</> / l>
V' S"
^
^ ^ '^
^•
^
CL
20
/ // ^ ;# s^ ^ ,-"
^ ^
^ ^
/ / ^
^_ ^.'^
^~ _^^
^
•^
^^
sS
^£* ^^- —-" —"'
10 ^ *= ^
— —-
^M tf 1
fc «
*
^
RPM X 10
1896
Airflex
CB ELEMENT ASSEMBLY DUAL MOUNTED
SIZES 12 TO 45
NOTES:
© Refers to basic parts list number only. When ordering,
number of air inlets and type of connection must be specified.
0 The torque rating in each application is dependent upon
applied air pressure and operating speed.
© Tolerance: 12 and 14 +.000 -.005
16 thru 24 +.000 -.003
26 thru 32 -I-.000 -.010
36 thru 45 +.000 -.015
® Drum diameter is nominal inch size; i.e.,
+
12C8350 Drum = 12.000 /992
12CB350 145731 26,600 10 125 .188 17.625 16.875 12.125 16.875 14 3/8 .313 3/8-18 12.857 .688 24 8.750
14CB400 145604 39,400 11.125 .188 19.625 18.875 14.125 18.875 16 3/8 .313 3/8-18 11.250 .688 28 9.750
16CB500 145432 70,400 13.625 .188 23.500 22.500 16.188 22.250 8 1/2 .375 3/8-18 22.500 .813 20 12.000
I3CB500 145433 88,000 13.625 .188 25.500 24.375 18.188 24.375 12 1/2 .375 3/8-18 15.000 .813 22 12.000
20CB500 145434 107,200 13.625 .188 27.500 26.375 20.188 26.375 12 1/2 .375 3/8-18 15.000 .813 24 12.000
22CB500 145435 124,600 13.625 .188 29.500 28375 22.188 28.375 12 1/2 .375 3/8-18 15.000 .813 26 12.000
24CB500 145436 150,000 13.625 .188 31.500 30.375 24.188 30.375 16 1/2 .375 3/8-18 11.250 .813 28 12.000
26CB525 145437 184,800 14.250 ,250 34,000 32,750 26.188 32,500 16 5/8 .500 1/2-14 11.250 .844 32 12.563
28CB525 145438 212,000 14 438 .250 36.000 34.750 28.188 34.500 16 5/8 .500 1/2-14 11.250 .844 34 12.688
30CBS25 145439 242,000 14.438 .250 38.000 36.750 30.188 36.500 16 5/8 .500 1/2 14 11,250 .844 36 12.688
32CB525 145440 274,000 14.438 .250 40.000 38.750 32.188 38.500 18 5/8 .500 1/2-14 ® .844 38 12.688
36CB525 145441 344,000 14.438 .250 44.625 43.125 36.188 43.250 18 3/4 .625 3/4-14 ® .844 44 12.688
40CB525 145442 422,000 14.438 .250 48,625 47.125 40.188 47.250 20 3/4 .625 3/4-14 9.000 .844 48 12.688
45C8525 145443 520,000 14.438 .281 53.625 52.125 45.188 52.250 24 3/4 .625 3/4-14 7.500 .844 54 12.688
© Maximum RPM is dependent upon operating condi- 18CB500 88,000 166 144 524 98 1400 C-2
tions and varies for each application. Consult factory 20CB500 107,200 180 185 576 106 1310 C-2
for applications exceeding these speeds. 124,600 194
22CB500 233 624 116 1220 C-2
For installation, operation and maintenance instruc-
24CB500 150,000 209 292 676 126 1200 C-2
tions, request Form CB4000.
26CB525 184,800 272 432 808 138 1050 3/4 RH
For application information request Form AE 100.04.
28CB525 212,000 286 517 860 148 1000 3/4 RH
IMPORTANT: Warranties are void on all applications
30CB525 242,000 302 621 916 158 950 3/4 RH
which exceed these specifications. For new applica-
tions, Eaton accepts no responsibility and extends no 32CB525 274,000 321 736 966 168 900 3/4 RH
warranty unless it has approved the application in 36CB525 344,000 366 1052 1100 182 810 3/4 RH
advance. 40CB525 422,000 413 1502 1220 202 740 1"RH
All rotating equipment must be protected to comply 45CB525 520,000 537 2293 1350 230 670 1" RH
with OSHA standards.
COMPENSATING
AIR PRESSURE
TO OVERCOME
CENTRIFUGAL
FORCE
7 8 9 10
RPMX1CT 2
1897
Airflex D25-
— D2 -D3
NOTES:
® Refers to basic parts list number only. When ordering,
number of air inlets and type of connection must be
specified.
Elements available with one, two or four side connec-
tions or quick release valves except 11.5VC500 which
has one or two.
@ Exact torque rating in each application is dependent
upon applied air pressure and operating speed.
© Tolerance: 11.5 thru 20+ .000 -.005
24 and 28 +.000 -.008
33thru42 +.000 -.010
@ Recommended drum dia. = Nominal to minus .010.
DIMENSIONS IN INCHES
TORQUE L 0, 0, W
PART RATING Q
SIZE
ILB. INS.)
Dj D3 On Dis G H: Hi, H7
SIZE
V
NO. SIZE
(DEG.I
WIDTH
NO. NO. SIZE NO. NO.
ffi AT 75 PSI @ ® ® (P.T.)
1I.5VC500 145639 27,000 6.125 .234 2.375 .563 19.625 18.875 11.625 18.875 16 .375 2 .375 2 .375 11.25 .563 8 5,000
14VC500 145829 39,200 6.125 .312 2.875 .563 23.500 22.500 14.219 22.250 8 .500 4 .375 4 .375 22.5 .563 8 5.000
16VC600 145640 65,000 7.375 .312 2.875 .563 25.500 24.375 16.219 24.375 12 .500 4 .376 4 .375 15 .688 8 6.000
20VC600 148641 93,000 7.375 .312 2.875 .563 29.500 28.375 20.219 28.375 12 .500 4 .375 4 .375 15 .688 10 6.000
24VC650 145642 135,000 7.688 .391 2.875 .625 34.000 32.750 24.219 32.500 16 .625 4 .500 4 .500 11.25 .594 12 6.500
28VC650 145643 182,000 7.688 .391 2.875 .625 38.000 36.750 28.219 36.500 16 .625 4 .500 4 .500 1125 .594 14 6.500
33VC660 145644 25S.OOO 7,688 .469 3.125 .625 44.625 43.125 33.219 43.250 18 .750 4 .750 4 .750 15 .594 16 6.500
37VC650 145645 320,000 7.688 .469 3.125 .625 48.625 47.125 37.219 47.250 20 .750 4 .750 4 .750 9 .594 18 6.500
42VC650 145647 380,000 7.688 469 3.125 .625 53.625 52.125 42.219 52.250 24 .750 4 .750 4 .750 7.5 ,594 20 6.500
COMPENSATING
AIR PRESSURE ?0 b^
TO OVERCOME t--- j /
/ s / /<•
CENTRIFUGAL 60
/ /
/
/
/
^i 4^/ /
FORCE — 4 3
- ?-
7* "^
^
k ^/
7^ s
50 V?
£J y- ^ ^~ A
/
/ ^
f P/ /
4*// j*
x
/" /
W
, / / / /
£L 40
/ / / ^ ^
v,
/
/
/ -7 ^ •^ ^ ^
//
30 ^ / /
/ y/
/ / •^ ^K
20
/, \ ^
^~ ^ ^ ^
/; '/ ^ :>; ^
~~^
^f i^
gS —'.- •<-
to
^
^ ^
M« i« •1Si £
^
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 If
2
RPMX10'
1898
Airflex
DUAL NARROW VC ELEMENT ASSEMBLIES
SIZE 11.5VC500 TO 42VC650
NOTES:
® Refers to basic parts list number only. When ordering,
number of air inlets and type of connection must be
specified.
Elements available with two or four side connections or
quick release valves except 11.5VC500 which has two.
(2) Exact torque rating in each application is dependent
upon applied air pressure and operating speed.
© Tolerance: 11.5 thru 20+ .000 -.005
24 and 28 +.000 -.003
33 thru 42 +.000 -.010
@ Recommended drum dia. = Nominal to — .010.
DIMENSIONS IN INCHES
TORQUE L 0, 04 W
PART RATING 0
SIZE Oj Da DM G Hi H« H- V
NO. ILB. INS.) SIZE (DEC.)
NO. SIZE NO. SIZE NO. NO. WIDTH
0) AT75PSI® ® ® (P.T.I
11.5VC500 146112 54,000 12.750 .234 .563 19.625 18.875 11.625 18.875 16 .376 2 .375 2 .375 11.250 .563 16 11.688
14VC500 146114 78.400 12.688 .312 .563 23.500 22.500 14.219 22.250 8 .500 4 .375 4 .375 22.500 .563 16 1 1 .688
16VC600 146115 130,000 15.188 .312 .563 25.500 24.375 16.219 24.375 12 .500 4 .375 4 .375 15.000 .688 16 13.812
20VC600 148116 186,000 15.188 .312 .563 29.500 28.375 20.219 28.375 12 .500 4 .375 4 .375 15.000 .688 20 13.812
24VC650 146117 270,000 15.938 .391 .625 34.000 32.750 24.219 32.500 16 .625 4 .500 4 .500 1 1 .250 .594 24 14.750
28VCS50 146118 364,000 15.938 .391 .625 38.000 36.750 28.219 36.500 16 .625 4 .500 4 .500 11.250 .594 28 14.750
33VC650 146119 510,000 15.938 .469 .625 44.625 43.125 33.219 43.250 18 .750 4 .750 4 .750 15.000 .594 32 14.750
37VC650 146120 640,000 15.938 .469 .625 48.625 47.125 37.2M9 47.250 20 .750 4 .750 4 .750 9.000 .594 36 14.750
42VC650 146121 760,000 15.938 .469 .625 53.625 52.125 42.219 52.250 24 .750 4 .750 4 .750 7.500 .594 40 14.750
COMPENSATING
AIR PRESSURE
TO OVERCOME
CENTRIFUGAL
FORCE
9 10 11
RPMX1CT 2
1899
Airflex
WIDE VC ELEMENT ASSEMBLIES
SIZE 14VC1000 TO 60VC1600
NOTES:
© Refers to basic parts list number only. When ordering,
number of air inlets and type of connection must be
specified.
Elements available with one, two or four side connec-
tions or quick release valves.
@ Exact torque rating in each application is dependent
upon applied air pressure and operating speed.
® Tolerance: 14 thru 20 +.000 -.005
24 and 28 +.000 -.008
32 +.000 -.010
38 thru 60 +.000 -.015
@ Recommended drum dia. = Nominal to -.010.
DIMENSIONS IN INCHES
TORQUE L Oi 04 W
PART RATING 0
SIZE Di Dt Oj4 D2s G H2 H. H, V
NO. (IB. -INS.) SIZE (DEG.I
NO. SIZE NO. SIZE NO. NO. WIDTH
® AT75PSI® ® ® (P.T.)
14VC1000 145838 85,000 11.563 .312 2.875 .625 23.500 22.600 14.219 22.250 8 .500 4 .375 4 .375 22.500 .781 8 10
16VC1000 145821 114,000 11.563 .312 2.875 .625 25.500 24.375 16.219 24.375 12 .500 4 .375 4 .375 15.000 .781 8 10
20VC1000 145832 161,000 11.563 .312 2.875 .625 29.500 28.375 20.219 28.375 12 500 4 375 4 375 15.000 .781 8 10
24VC1000 145675 219,000 11.563 .391 2.875 .625 34.000 32.750 24.219 32500 16 .625 4 .500 4 .500 11 250 .781 10 10
28VC1000 145674 296,000 11.563 .391 2.875 .625 38.000 36.750 28.219 36.500 16 .625 4 .500 4 500 11.250 .781 10 10
32VC1000 145673 415,000 11.625 .391 2875 .625 43.875 42.625 32.219 42.125 24 .625 4 .500 4 .500 7.500 .813 12 10
38VC1200 145739 680,000 13.750 .469 3.125 .656 49.375 47.875 38.219 48.000 20 .750 4 .625 4 .750 9.000 .875 12 12
42VC1200 145677 819,000 13.750 .469 3.125 .656 53.626 52.125 42.219 52.250 24 .750 4 .625 4 . .750 7.500 .875 14 12
46VC1200 145671 950,000 13.750 .547 4.875 .750 60.250 58.500 46.250 57.500 24 .875 4 625 4 .750 7.500 .875 16 12
52VC1200 145841 1,215,000 14.250 .547 7.125 1.125 67.000 65.500 52.250 65.000 32 .875 4 .875 4 1 000 5.625 1.125 18 12
5IVC1600 145835 1,610,000 18.250 .547 9.125 1.125 67.000 65500 51.250 65.000 32 .875 4 .875 4 1.000 5.625 1.125 18 16
60VC1600 145915 2,182,900 18500 .609 9.250 1.375 77.000 75.000 60.428 74.250 36 1 000 4 .875 4 1.000 5.000 1.250 20 16
NOTES: TORQUE
FRICTION
NORMAL
MAX.©
RECOMMENDED
RATING WEIGHT TUBE AIRFLEX
© Maximum RPM is dependent upon operating conditions SIZE
(LB. • INSI (IBS.) ( L B . . FT:)
AREA
(IN. ; )
VOLUME
RECOMMENDED
H.P.M.
ROTORSEAL
AT75PSK11 (IN:1) SIZE
and varies for each application. Consult factory for
verification. 14VC1000 85,000 213 ,» 350 37 1800 C-2
IMPORTANT: Warranties are void on all applications 32VC1000 415,000 624 1570 960 222 1050 run
which exceed these specifications. For new applica- 38VC1200 680,000 684 2330 1360 332 740 H/4 RH
tions, Eaton accepts no responsibility and extends no 42VC1200 819,000 895 3570 1500 390 670 1-1/4 RH
warranty unless it has approved the application in 46VC1200 950,000 980 4830 1640 665 600 1-1/2 RH
All rotating equipment must be protected to comply 51VC1600 1,610,000 1934 10580 238Q 1000 550 1-1/2 RH
with OSHA standards. 60VC1600 2,182,900 2450 20532 2800 1200 520 1-1/2 RH
COMPENSATING
AIR PRESSURE
TO OVERCOME
CENTRIFUGAL
FORCE
9 10
RPMX1CT 2
1900
v -
Airflex
TYPE E ELEMENT ASSEMBLY
SIZES 12 TO 40
§Dimension G, Tolerances 12 to 27
30 to 40 + .010
-.000
12E475 145114 11,300 25 5 5.500 2.750 6.000 7.000 10 .375 1.250 1 .250 18.000 11.906 .269 8.043 .375 8 4.750
14E475 145213 16,000 32 8 5.500 2.750 7.625 8.750 12 .375 1.250 1 .250 15.000 13.906 .269 9.731 .375 10 4.750
16E475 145214 21,500 42 14 5.500 2.750 9.625 10.750 8 .500 1.250 1 .375 22.500 15.906 .269 11.731 .375 12 4.750
19E475 145215 31,500 53 26 5.500 2.750 12.125 13.750 10 .500 1.250 1 .375 18.000 18.906 .269 14.731 .375 12 4.750
21.5E475 145395 40,500 60 39 5.500 2.750 14.250 15.750 8 .750 1.250 1 .375 22.500 21.406 .269 17.231 .375 14 4.750
24E475 145216 52,000 67 56 5.500 2.750 16.750 18.250 10 .750 1.250 1 .375 18,000 23.906 .269 19.731 .375 16 4.750
27E475 145334 67,000 75 79 5.500 2.750 19.750 21.250 12 .750 1.250 1 .375 1 5.000 26.906 .269 22.731 .375 18 4.750
30E600 145336 106,000 125 160 7.000 3.500 21.000 23.000 14 .750 1.625 1 .500 12.857 29.906 .312 24.938 .500 14 6000
34E600 145335 137,000 156 261 7.000 3.500 25.000 27.000 16 .750 1.625 1 .500 11.250 33.906 .312 28.938 .500 16 6.000
40E600 145452 225,000 520 520 8.125 4.063 30.000 32.000 18 .750 1750 2 .500 10.000 39.906 .312 34.625 .563 18 7.000
Airflex
DUAL PASSAGE
ROTORSEAL
Type BD
The BD rotorseal provides a reliable
means of transferring a fluid to two
rotating components on the same
shaft. Each passage can be used
for a different fluid if desired; for
instance, air for clutch actuation and
oil for bearing lubrication.
The inlet ports have standard V*
inch pipe threads. A 1A inch outlet
port in the rotorseal flange could
be used to feed one of the shaft
mounted components. The second
outlet requires drilling of the shaft.
1901
Airflex
DUAL PASSAGE
ROTORSEAL (Continued)
Type AD TypeADP
Your application may involve the same conditions as the The Type ADP rotorseal is attached to the shaft with a
BD rotorseal, but you may require a smaller diameter pipe threaded outlet instead of a mounting flange. It is
mounting flange. The type AD rotorseai will fill your needs. designed for the same service conditions as the AD
A 1/4 inch inlet port is provided on the rotorseal body for rotorseal. The outer fluid passage feeds into the end of the
each of the passages. Both passages can discharge machinery shaft through a one inch pipe threaded shaft,
directly into the rotating shaft in your machinery. However, while a 1/4 inch port in the side of the shaft serves as an
a 1A inch port on the mounting flange provides an optional outlet for the inner passage. Both fluid inlet ports are
1
outlet for the outer passage. /4 inch.
Operation at maximum air pressure combined with maximum speed should be avoided.
For transferring hydraulic fluid or oil, consult factory.
1902
Airflex
SINGLE PASSAGE
ROTORSEAL
Dimensions in Inches
Operation at maximum air pressure combined with maximum speed should be avoided.
For transferring hydraulic fluid or oil, consult factory.
Type RH
If your application demands a large
volume, single passage rotorseal,
the RH type solves your problem.
This design incorporates a mount-
ing flange for attachment to the
machinery shaft or assembly.
External pipe threads are provided
on the inlet rotorseal shaft to
facilitate supply line connections.
Dimensions in Inches
Max. Max. Inlet
Speed Pressure Thread D D, r G« H K L N s
Size Part No. (RPM) (PSI) Size No. Size
K 145487K 3000 500 % N.P.T. 6% 4% X 1.749 3 m 4 %
3
A .125
1 145488K 3000 500 1 N.P.T. 6^ 5/8 Yi 1.999 3^ 2% 4 % 1 .125
I/
]% 145489K 2000 400 1J4 N.P.T. 7% 5% /2 2.499 3% 3X8 4 % 1% .125
1/2 145461 K 2000 400 \Vi N.P.T. 7% V/4 % 2.749 4 3% 4 % 1X2 .125
Dimension G, Tolerance
+ .000
-.002
Operation at maximum air pressure combined with maximum speed should be avoided.
For transferring hydraulic fluid or oil, consult factory.
10
1903
Airflex
QUICK RELEASE VALVES
AND MUFFLERS
Part No. 0, u,
Light Standard Hex N.P.T. Swing
Size Spring Spring Size D D, H M 0 Size p Radius
Quick release valve and muffler combinations
% 145406CG 145406BK 1/8 3.109 2.547 1.125 1.969 .500 % 1.188 2.062
11
1904
Airflex
Water-Cooled Tensioners,
Brakes and Clutches.