Professional Documents
Culture Documents
GUI V2.6.2 RC7 User Guide
GUI V2.6.2 RC7 User Guide
GUI V2.6.2 RC7 User Guide
ACE6 mMESH
GUI User Guide
(V2.6.2 RC7)
UNCLASSIFIED
Page 1 of 20
ACE6 TECHNOLOGY PTE LTD 3791 Jalan Bukit Merah, #10-15, E-Centre@Redhill, Singapore 15947 Tel : 6258 4692 / Fax : 6258 4694
mMESH USER GUIDE 2.6.2
1-1 General
This chapter covers normal day to day operations of a fully configured mMESH system.
Once installed and configured the Mesh is easy to operate. These guidelines will help you
perform basic operations on your Mesh.
Note: If you are working with a new system or you need to change any of the configurations.
2. Select your Local IP address from the List and then click on the search Icon to
search the IP address of the connected node.
3. IP address of the connected node will appear on the Device List. Click confirm to
enter the configuration setting of the node
Page 2 of 20
ACE6 TECHNOLOGY PTE LTD 3791 Jalan Bukit Merah, #10-15, E-Centre@Redhill, Singapore 15947 Tel : 6258 4692 / Fax : 6258 4694
mMESH USER GUIDE 2.6.2
Upon entering the GUI software, User will see the primary page with this Top Bar Menu
Page 3 of 20
ACE6 TECHNOLOGY PTE LTD 3791 Jalan Bukit Merah, #10-15, E-Centre@Redhill, Singapore 15947 Tel : 6258 4692 / Fax : 6258 4694
mMESH USER GUIDE 2.6.2
The status page give you an update on the mesh network status. Status like number of node
connected, RF signal status, Data transmission status, GPS coordinate.
Page 4 of 20
ACE6 TECHNOLOGY PTE LTD 3791 Jalan Bukit Merah, #10-15, E-Centre@Redhill, Singapore 15947 Tel : 6258 4692 / Fax : 6258 4694
mMESH USER GUIDE 2.6.2
Update PARAMETER
Property Range Description
Update All Nodes Checkbox – Set or Clear Select The Update All Nodes
checkbox to enable updates
on all nodes.
Paraeters which are marked
with ‘*’.
RF PARAMETER
Property Range Description
Mesh ID 128 character length The Mesh ID tells the unit
which group it belongs to.
All Nodes on Mesh ID
Ace6_Demo for example
will communicate with each
other.
Page 5 of 20
ACE6 TECHNOLOGY PTE LTD 3791 Jalan Bukit Merah, #10-15, E-Centre@Redhill, Singapore 15947 Tel : 6258 4692 / Fax : 6258 4694
mMESH USER GUIDE 2.6.2
Page 6 of 20
ACE6 TECHNOLOGY PTE LTD 3791 Jalan Bukit Merah, #10-15, E-Centre@Redhill, Singapore 15947 Tel : 6258 4692 / Fax : 6258 4694
mMESH USER GUIDE 2.6.2
Default:
10 (Body worn 250mW)
9 (Robust/Standard 2W)
Default:
10 (Body worn 250mW)
9 (Robust/Standard 2W)
AUDIO PARAMETER
Property Range Description
Headset Gain Variable Slider This slider controls the
Headset gain.
Page 7 of 20
ACE6 TECHNOLOGY PTE LTD 3791 Jalan Bukit Merah, #10-15, E-Centre@Redhill, Singapore 15947 Tel : 6258 4692 / Fax : 6258 4694
mMESH USER GUIDE 2.6.2
VIDEO PARAMETER
Property Range Description
Video in Checkbox - set or clear You can select the video
to be off or an available
Page 8 of 20
ACE6 TECHNOLOGY PTE LTD 3791 Jalan Bukit Merah, #10-15, E-Centre@Redhill, Singapore 15947 Tel : 6258 4692 / Fax : 6258 4694
mMESH USER GUIDE 2.6.2
ENCRYPTION
Property Range Description
Encryption mode No Encryption *Additional license
required
AES256
AES128
DES
MODE
Property Range Description
Mode Checkbox - set or clear Fixed or Mobile
*For Roaming Mode
AUDIO
Property Range Description
Mode Conference *Not in use.
Under Development.
PTT
Page 9 of 20
ACE6 TECHNOLOGY PTE LTD 3791 Jalan Bukit Merah, #10-15, E-Centre@Redhill, Singapore 15947 Tel : 6258 4692 / Fax : 6258 4694
mMESH USER GUIDE 2.6.2
NETWORK PARAMETER
Property Range Description
Node Name You can use up to 12 The unit name is a
alphanumeric characters friendly name to make it
for the unit name easier for you to know
which Node we are
talking about.
Page 10 of 20
ACE6 TECHNOLOGY PTE LTD 3791 Jalan Bukit Merah, #10-15, E-Centre@Redhill, Singapore 15947 Tel : 6258 4692 / Fax : 6258 4694
mMESH USER GUIDE 2.6.2
WIFI PARAMETER
Property Range Description
Wifi Switch Checkbox - On or Off To switch On or Off Wifi
Hide Checkbox - Yes or No To hide or Display SSID
SSID Set a SSID. A Service Set Identifier
(SSID) is the public name
for the wireless network.
Page 11 of 20
ACE6 TECHNOLOGY PTE LTD 3791 Jalan Bukit Merah, #10-15, E-Centre@Redhill, Singapore 15947 Tel : 6258 4692 / Fax : 6258 4694
mMESH USER GUIDE 2.6.2
LOG PARAMETER
Property Range Description
Log Output Checkbox - set or clear Select whether to output
the system log
Log Level 0, 1, 3, 7, 15 0: Do not output log
(default)
1: Output errors only
3: Output errors and
warnings
7: Output errors,
warnings and debugs
15: Output all logs
Log Server IP Example: 192.168.2.120 Corresponding System log
output IP address
Page 12 of 20
ACE6 TECHNOLOGY PTE LTD 3791 Jalan Bukit Merah, #10-15, E-Centre@Redhill, Singapore 15947 Tel : 6258 4692 / Fax : 6258 4694
mMESH USER GUIDE 2.6.2
DHCP PARAMETER
Property Range Description
DHCP Message Checkbox - Enable or Relaying DHCP messages
disable between ethernet subnet
DHCP End Address Any valid IP address in These fields enable you to
the form: set a range of IP
addresses Node will use
NNN.NNN.NNN.NNN E.g. for this.
192.168.1.254
Page 13 of 20
ACE6 TECHNOLOGY PTE LTD 3791 Jalan Bukit Merah, #10-15, E-Centre@Redhill, Singapore 15947 Tel : 6258 4692 / Fax : 6258 4694
mMESH USER GUIDE 2.6.2
Page 14 of 20
ACE6 TECHNOLOGY PTE LTD 3791 Jalan Bukit Merah, #10-15, E-Centre@Redhill, Singapore 15947 Tel : 6258 4692 / Fax : 6258 4694
mMESH USER GUIDE 2.6.2
UART PARAMETER
Property Range Description
UART Name UART0 Serial Com selection.
UART1*
RS232
9600
14400
19200
38400
115000
Page 15 of 20
ACE6 TECHNOLOGY PTE LTD 3791 Jalan Bukit Merah, #10-15, E-Centre@Redhill, Singapore 15947 Tel : 6258 4692 / Fax : 6258 4694
mMESH USER GUIDE 2.6.2
VIDEO PARAMETER
Property Range Description
Default Resolution CIF, HD1, D1, 720p, 1080p Default video resolution
Bit Rate CIF, HD1, D1, 720p, 1080p 1080p: 2500-4000Kbps
720p: 1500-2499Kbps
D1: 750-1499Kbps
HD1: 600-749Kbps
CIF: 50-599Kbps
Cache 0-100 Streaming buffering to
prevent video stutter
MAP PARAMETER
Property Range Description
Map Path Browse to select Path Upload Map
Coordinate Rest of the World (WGS- GPS offset correction
84)
China (GCJ-02)
Page 16 of 20
ACE6 TECHNOLOGY PTE LTD 3791 Jalan Bukit Merah, #10-15, E-Centre@Redhill, Singapore 15947 Tel : 6258 4692 / Fax : 6258 4694
mMESH USER GUIDE 2.6.2
Enable or Disable GUI Voice feature. Allowing using PC GUI to communicate to other nodes. *PC
MIC/Speaker required.
Page 17 of 20
ACE6 TECHNOLOGY PTE LTD 3791 Jalan Bukit Merah, #10-15, E-Centre@Redhill, Singapore 15947 Tel : 6258 4692 / Fax : 6258 4694
mMESH USER GUIDE 2.6.2
The Spectrum feature assist user to identify noise interference and signal strength received from
other nodes.
Page 18 of 20
ACE6 TECHNOLOGY PTE LTD 3791 Jalan Bukit Merah, #10-15, E-Centre@Redhill, Singapore 15947 Tel : 6258 4692 / Fax : 6258 4694
mMESH USER GUIDE 2.6.2
*Only Video
Page 19 of 20
ACE6 TECHNOLOGY PTE LTD 3791 Jalan Bukit Merah, #10-15, E-Centre@Redhill, Singapore 15947 Tel : 6258 4692 / Fax : 6258 4694
mMESH USER GUIDE 2.6.2
Page 20 of 20
ACE6 TECHNOLOGY PTE LTD 3791 Jalan Bukit Merah, #10-15, E-Centre@Redhill, Singapore 15947 Tel : 6258 4692 / Fax : 6258 4694