Professional Documents
Culture Documents
0866 Sigmadur Finish High Gloss
0866 Sigmadur Finish High Gloss
December 2009
please turn
The information in this data sheet is to the best of our knowledge correct at the date of printing. The company reserves the right to modify data without notice.
Any change in data will normally be followed by issue of a new data sheet. The user should check the date of printing and if more than 12 months have elapsed,
then the data should only be used after checking with our nearest sales office to establish that they are still valid. Since conditions of application and service may
be beyond our control, no liability can be accepted on the basis of this data.
SIGMADUR FINISH HIGH GLOSS 0866
December 2009
SYSTEM SPECIFICATION
Recommended primer - appropriate to substrate type and compatible with polyurethane
Recommended finish - applied in 2 coats @ 50µm dft per coat
Intermediate texture option - for over-coating of 0815 Sigma Textured MP, the first coat should
be diluted 10% with thinner 21-22 with the second coat undiluted
Application limitations - the minimum allowable substrate temperature is 5 °C
- maximum humidity during application and curing is 85%
Potlife at 20 °C 8 hours
AIRLESS SPRAY
Recommended thinner 21-22 (flashpoint 50 °C)
Volume of thinner 0 - 20%
Nozzle orifice approx. 0.40 - 0.48 mm (0.016 - 0.019 inch)
Nozzle pressure 150 bar (approx. 2100 p.s.i.)
AIR SPRAY
Recommended thinner 21-22 (flashpoint 50 °C)
Volume of thinner 10 - 20%
Nozzle orifice 1.0 - 2.5 mm
Nozzle pressure 3 - 4 bar (approx. 40 - 60 p.s.i.)
BRUSH AND ROLLER
Recommended thinner 21-22 (flashpoint 50 °C)
Volume of thinner 0 - 10%
CLEANING SOLVENT 21-22 (flashpoint 50 °C)
The information in this data sheet is to the best of our knowledge correct at the date of printing. The company reserves the right to modify data without notice.
Any change in data will normally be followed by issue of a new data sheet. The user should check the date of printing and if more than 12 months have elapsed,
then the data should only be used after checking with our nearest sales office to establish that they are still valid. Since conditions of application and service may
be beyond our control, no liability can be accepted on the basis of this data.