NO. CONFIRMATION 01 The HART Communicator should be Universal HART Communicator. 02 The Universal Hart Communicator is required to calibrate & communicate with various Temperature , Pressure , Level transmitters etc. of different standard manufacturer Like Emerson/ Yokogawa/ ABB/ SMAR/ SEIMENS/ FUJI etc. Some examples of the HART protocol support required for instruments are: Temperature Manufacturer Pressure instruments instruments 1151 3044C 2088 644 Rosemount 3001C 3144 3051, 3051S 3244, 3144P YTA 110, 310 Yokogawa EJA and 320 FCX Fuji FRC FCXAZ Foxboro/Invensys I/A Pressure 03 The Hart Communicator Should have ability to read Message, tag, descriptor, calibration date, sensor PV information, PV output information, Write PV ranges (upper and lower), Write tag, description etc. 04 The Universal HART Communicator should be able to select & change Unit of Pressure & Temperature Through Universal HART Communicator. 05 The Hart Communicator Should be able to Set zero offset, Trim DAC zero (mA output 4 mA), Trim DAC gain (mA output 20 mA) 06 The HART communicator should be supplied alongwith Standard Software to Update new device profiles (DD File) and firmware via Internet connection 07 The Universal HART Communicator should have Memory Dedicated memory / minimum 2 GB memory card for up to 1000 HART device profiles store more than 200 device configurations. 08 The Universal HART Communicator should have a keyboard with Alphanumeric & symbol Keyboard, Power On Of Button, Up & Down, enter keys etc. for editing and operation. 09 The Universal HART Communicator should have wide screen 6 lines dot matrix graphic backlit LCD Display, 128 x 64 pixel dot matrix or better 10 Continuous run time --100 hours approx without backlit -- 60 hours approx with minimum backlit --Programmable auto power-off. 11 Operative limits Temperature limits : –10 and +70 °C (+14 and +158 °F) Storage : –20 and +70 °C (–4 and +158 °F) 12 Environmental limits Humidity - Relative humidity: up to 100 %. 13 Case Materials - Glass fiber reinforced, flame resistant, anti-static 14 The Universal HART Communicator should come alongwith 250ohm Resistor, Silicon rubber protective shell, Soft Carrying bag, Hard Carrying case, Standard banana jack with lead set with insulated minigrabbers clip, Software CD, Rechargeable battery, 4 disposable battery with battery assembly, Charger, Communication cable etc. 15. Lifelong valid licensed version OR Freely upgradable licenses for software or firmware etc. 16. HART protocol revision: Rev. 6.0 OR Higher
Database Software: Should be easy compatible with OS Windows -7
and higher 17. Three (03) year warranty OR More for all hardware parts 18. Make & model