This document provides instructions for using a BMW ELV emulator. The emulator plugs into the connector from the ELV unit in BMW models like E60, E87, and E90. It emulates the electronic steering lock module (ELV) so problematic original modules are not needed. To use it, the 4-pin connector is removed from the ELV unit and plugged into the emulator, which is then plugged into the car to start it. The emulator LED will blink when the car access system accesses the ELV for locking and unlocking commands.
This document provides instructions for using a BMW ELV emulator. The emulator plugs into the connector from the ELV unit in BMW models like E60, E87, and E90. It emulates the electronic steering lock module (ELV) so problematic original modules are not needed. To use it, the 4-pin connector is removed from the ELV unit and plugged into the emulator, which is then plugged into the car to start it. The emulator LED will blink when the car access system accesses the ELV for locking and unlocking commands.
This document provides instructions for using a BMW ELV emulator. The emulator plugs into the connector from the ELV unit in BMW models like E60, E87, and E90. It emulates the electronic steering lock module (ELV) so problematic original modules are not needed. To use it, the 4-pin connector is removed from the ELV unit and plugged into the emulator, which is then plugged into the car to start it. The emulator LED will blink when the car access system accesses the ELV for locking and unlocking commands.
This document provides instructions for using a BMW ELV emulator. The emulator plugs into the connector from the ELV unit in BMW models like E60, E87, and E90. It emulates the electronic steering lock module (ELV) so problematic original modules are not needed. To use it, the 4-pin connector is removed from the ELV unit and plugged into the emulator, which is then plugged into the car to start it. The emulator LED will blink when the car access system accesses the ELV for locking and unlocking commands.
www.mbkeyprog.com info@mbkeyprog.com BMW ELV EMULATOR
Simply remove the 4 pin connector fromyour elv unit.
Plug the connector onto the emulator and start the car. Problematic ELV modules are a thing of the past!
· Works with E60, E87, E90 and similar.
· Emulates ELV (steering lock module). · "Plug and Play" - no additional programming necessary. In some cases must clear CAS error memory and counters with diagnostic tool. If connected correctly orange LED (located on emulator board) must blink when CAS is accessing ELV (lock and unlock commands etc).
+48 517 443 433, +48 22 724 99 96
www.mbkeyprog.com info@mbkeyprog.com BMW ELV EMULATOR Generic Instructions 1. Make sure steering wheel is unlocked and car starts (if not then reset CAS counter) 2. Remove the 4 wire connector fromthe steering wheel column 3. Identify the location of the number 1 wire from the wiring harness connector or the steering column connector 4. Plug the connector fromyour wiring harness (4 wire black connector) into the Emulator so pin 1 from your harness is mated with pin 1 on the emulator. 5. It’s best to secure the connector so it can’t come loose and make sure it has good contact with your wiring harness – Best to solder in place!