Professional Documents
Culture Documents
Exam Smaw 9
Exam Smaw 9
Direction: Choose the letter of the best answer. Write the letter of your answer of a separate sheet.
I. Multiple choice
1. A tooth cutting tool usually with the solid and adjustable frame.
A. Hacksaw B. Screw driver C. Hammer D. Wrench
2. Tool used for loosening and tightening light and heavy nuts and bolts.
A. Hacksaw B. Screw driver C. Hammer D. Wrench
3. This tool is used to tighten and loosen screws by pushing or pulling screws in a rotating manner.
A. Hacksaw B. Screw driver C. Hammer D. Wrench
4. The process applied to hand tool to extend its life span is called?
A. Cleaning b. Simple Repair C. Lubricating D. Overhauling
5. Which process refers to the application of substance to the identified items in parts like barrels, rollers, bearing, bolts
and nuts, and other automotive parts to lessen friction?
A. Cleaning b. Simple Repair C. Lubricating D. Overhauling
6. A Bench vise is rusting. How can it be prevented?
A. Cleaning b. Simple Repair C. Lubricating D. Overhauling
7. A worker handle of a ball peen hammer is broken. What is the remedy?
A. Cleaning b. Simple Repair C. Lubricating D. Overhauling
8. Your hacksaw is dull? What maintenance activity should you do?
A. Cleaning b. Simple Repair C. Lubricating D. sharpening
9. Which is considered a minor repair?
a. The task not too long to perform b. Whole item to be replaced c. Motor overhauling d. Cleaning
10. The process of uniting two or more numbers to make it one
a. Addition b. Denominator c. Division d. Subtraction
11. The following belongs to English unit of measure, except?
a. lbs b.ft c. kg d. inch
12. Which of the following best describes Odd Numbers?
a. It is divisible by two b. It always has a remainder c. any number that is not divisible by two d. None
13. How many Inches are there in a ruler? a. 8 b. 12 c.15 d.3
14. How many centimeters are there in 1 meter? a. 10 b. 20 c 50 d. 100
15. What is the metric symbol for millimeter? a. ml. b. mm. c. mlm . d. mt
16. A kind of saw that is used to cut wood along the grain. a. cross cut saw b. Hacksaw c. Ripsaw d. A & B
17. It is the routine procedure to keep tool or equipment in most efficient condition.
a. Maintenance b. lubricating c. simple repairs d. Discard
18. Which tool is used to measure the dimension of an object?
a. measuring tool b. Driving tool c. Holding tool d. Boring tool
19. What do you call the cutting area of a Hacksaw? a. Blade b. tooth c. Frame d. metal
A. B. C.
31.____ Screwdrivers 1._____Meter a. Fastener
32.____ Ball peen Hammer 2._____Product b. Metal
33.____ Multiplication 3._____Odd c. Multiplier
34.____ Division 4._____Quotient d. Divisor
35.____ Numbers 5._____Bending e. Even
36.____ Metric System 6._____Screws f. Centimeter
37.____Sum 7._____addition g. plus sign
39. 58 inches=______cm
42. Why do we need to lubricate the moving parts of an object like springs and bearings?
43. Tightening and loosing of bolts and nuts is a must for what certain reason?
44. What would likely happen if a worker is innocent in the knowledge of simple repair?
45. In dusting our working area, which do you thinks is the best to use, cloth or feather duster? Why?
46-50 How will you apply the principle of 5S in the welding shop?