Professional Documents
Culture Documents
HSCX 10431 Manual
HSCX 10431 Manual
HSCX 10431 Manual
www.whirlpool.eu/register
ENGLISH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2
EN
ENGLISH
HEALTH & SAFETY, USE & CARE
and INSTALLATION GUIDES
THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.
In order to receive a more complete assistance,
please register your appliance on www.whirlpool.eu/register
Index
Installation guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
4
EN
Health and Safety guide
SAFETY
INSTRUCTIONS
IMPORTANT TO BE READ AND OBSERVED
Before using the dryer carefully cause serious injury. rol, kerosene, spot removers,
read, Health and Safety and turpentine, waxes and wax
Use and Care guides. All safety warnings give spe- removers should be washed
Keep these instructions close cific details of the potential risk in hot water with an extra
at hand for future reference. presented and indicate how to amount of detergent before
reduce risk of injury, damage being dried in the tumble
YOUR SAFETY AND SAFETY and electric shock resulting dryer.
OF OTHERS IS VERY IMPOR- from improper use of the dryer. Items such as foam rubber (la-
TANT. Carefully observe the following tex foam), shower caps, water-
instructions. proof textiles, rubber backed
This manual and the dryer Failure to observe these in- articles and clothes or pillows
itself provide important safety structions may lead to risks. fitted with foam rubber pads
warnings, to be read and ob- The Manufacturer declines any should not be dried in the tum-
served at all times. liability for injury to persons or ble dryer.
animals or damage to property Remove all objects from
if these advices and precau- pockets such as lighters and
tions are not respected. matches.
Do not use the tumble dryer if
Very young (0-3 years) and chemicals have been used for
This is the safety alert symbol. young children (3-8 years) shall cleaning.
This symbol alerts you to po- be kept away unless continu-
tential hazards that can kill or ously supervised. Oil-soaked items ignite spon-
hurt you and others. Children from 8 years old taneously, especially when
All safety messages will follow and above and persons with exposed to heat sources such
the safety alert symbol or the reduced physical, sensory or as in a tumble dryer. The items
word DANGER or WARNING. mental capabilities or lack of become warm, causing an oxi-
These words mean: experience and knowledge can dation reaction in the oil. Oxi-
use this dryer only if they are dation creates heat. If the heat
supervised or have been given cannot escape, the item can
DANGER instructions on safe appliance become hot enough to catch
use and if they understand the fire. Piling, stacking or storing
Indicates a hazardous situa- hazards involved. Children shall oil-soaked items can prevent
tion which, if not avoided, will not play with the dryer. Clean- heat from escaping and so cre-
cause serious injury. ing and user maintenance shall ate a fire hazard.
not be made by children with-
out supervision.
WARNING WARNING
Items that have been soiled
Indicates a hazardous situation with substances such as cook- Never stop a tumble dryer
which, if not avoided, could ing oil, acetone, alcohol, pet- before the end of the drying
5
cycle unless all items are quick- INSTALLATION environmental conditions of
ly removed and spread out so the room.
that the heat is dissipated. Installation and repairs must Do not install your dryer where
be carried out by a qualified it may be exposed to extreme
The last phase of the drying cy- technician, in compliance with conditions, such as: poor ven-
cle is done without heat (cool the manufacturer’s instructions tilation, high temperature or
down phase), to assure that the and local safety regulations. Do below 5°C or above 35°C.
laundry stays at a temperature not repair or replace any part
level which is not leading to a of the dryer unless specifically The dryer must not be installed
damaging of the laundry. stated in the user manual. behind a lockable door, a slid-
Children should not perform ing door or a door with a hinge
If you want to stack the dryer installation operations. Keep on the opposite side to that of
on a washing machine, first children away during instal- the tumble dryer, in such a way
contact our After-Sales Ser- lation of the dryer. Keep the that a full opening of the tum-
vice to verify if this is possible. packaging materials (plastic ble dryer door is restricted.
Stacking of a dryer is only bags, polystyrene parts, etc.)
admitted if the dryer is safely out of reach of children, during The dryer must be placed with
fixed on the washing machine and after the installation of the the back towards a wall, to
by using an appropriate stack- dryer. avoid injuries by touching the
ing kit. rear panel, which can become
Use protective gloves to per- hot during the drying process.
INTENDED USE form all unpacking and instal-
OF THE PRODUCT lation operations. Do not install the dryer in
After unpacking the dryer, rooms with poor ventilation. If
This dryer is designed solely make sure that it has not been you want to install it in a small
for domestic usage. To aim damaged during transport. In storage room, toilet, bathroom
the dryer as professional use is the event of problems, con- or similar, assure a good venti-
forbidden. The manufacturer tact the dealer or your nearest lation (open door, ventilation
declines all responsibility for After-sales Service. grid or slot larger than 500 cm²).
inappropriate use or incorrect The dryer must be handled
setting of the controls. and installed by two or more When installing the dryer make
persons. sure that the four feet are
CAUTION: The dryer is not Keep children away during stable and resting on the floor,
intended to be operated by installation of the dryer. adjusting them as required,
means of an external timer or and check that the dryer is per-
separate remote control sys- The dryer must be discon- fectly level using a spirit level.
tem. nected from the power supply
before carrying out any instal- If possible use a hose to drain
Do not use the dryer outdoors. lation operation. the water directly into the
Do not store explosive or During installation, make sure domestic plumbing system.
flammable substances such as the dryer does not damage the This will avoid having to empty
aerosol cans and do not place power cable. the water container at the end
or use gasoline or other flam- Only activate the dryer when of each drying cycle, since the
mable materials in or near the the installation procedure has condensation water can be
dryer: a fire may break out been completed. directly drained away.
if the dryer is inadvertently
switched on. After installation of the device Take care not to install the
to wait a few hours before dryer on a deep-pile carpet.
starting it, to acclimatize to the
6
EN
If, due to lack of space, the If the power cable is damaged fuse cover.
dryer must be installed directly it must be replaced with an 3. Refit both into plug.
next to a gas or coal stove, a identical one. The power cable Important:
heat insulating plate (85 x 57 cm) must only be replaced by a The fuse cover must be refitted
must be installed in between qualified technician in compli- when changing a fuse and if
and the side of the plate fac- ance with the manufacturer the fuse cover is lost the plug
ing the stove must be covered instruction and current safety must not be used until a cor-
with aluminium foil. regulations. Contact an author- rect replacement is fitted.
ized service centre. Correct replacement are identi-
The dryer is not designed for fied by the colour insert or the
built-in installation. Do not operate this dryer if it colour embossed in words on
has a damaged mains cord or the base of the plug.
The dryer can be installed un- plug, if it is not working prop- Replacement fuse covers are
der a worktop, provided that erly, or if it has been damaged available from your local elec-
adequate ventilation of the or dropped. Do not immerse trical store.
dryer is assured. Install a ven- the mains cord or plug in wa-
tilation grid (minimum 45 cm ter. Keep the cord away from For the Republic of Ireland
x 8 cm), in the rear part of the hot surfaces only
worktop under which the dryer The electrical components The information given in
is installed. must not be accessible to the respect of Great Britain will fre-
user after installation. quently apply, but a third type
ELECTRICAL WARNINGS Do not touch the dryer with of plug and socket is also used,
any wet part of the body and the 2-pin, side earth type.
Make sure the voltage speci- do not operate it when bare-
fied on the rating plate corre- foot. Socket outlet / plug (valid for
sponds to that of your home. both countries)
For installation to comply with ELECTRICAL CONNECTION If the fitted plug is not suitable
current safety regulations, an FOR GREAT BRITAIN AND for your socket outlet, please
omnipolar switch with mini- IRELAND ONLY contact After-sales Service for
mum contact gap of 3mm is further instruction. Please do
required. Fuse replacement. not attempt to change plug
Regulation require that the If the mains lead of this dryer is yourself. This procedure needs
dryer is earthed. fitted with a BS 1363A 13amp to be carried out by a qualified
fused plug, to change a fuse in technician in compliance with
For dryers with fitted plug, if this type of plug use an A.S.T.A. the manufactures instructions
the plug is not suitable for you approved fuse to BS 1362 type and current standard safety
socket outlet, contact a quali- and proceed as follows: regulations.
fied technician.
Do not use extension leads, CORRECT USE
multiple sockets or adapters.
Do not connect the dryer to a Do not exceed the maximum
socket which can be operated load allowed. Check the maxi-
by remote control. mum load allowed in the pro-
The power cable must be long gramme chart.
enough for connecting the
dryer, once fitted in its hous- Do not dry unwashed items in
ing, to the main power supply. the tumble dryer.
Do not pull the power supply 1. Remove the fuse cover (A)
cable. and fuse(B). Do not overdry the laundry.
2. Fit replacement 13A fuse into
7
Take care that no lint or dust is CLEANING AND
accumulated around the dryer. MAINTENANCE
SAFEGUARDING
THE ENVIRONMENT
For dryer models with heat- SCRAPPING OF This dryer is marked in compli-
pump technology: HOUSEHOLD APPLIANCES ance with European Directive
This dryer contains fluorinated 2012/19/EU, Waste Electrical
greenhouse gas (R134a). The When scrapping the dryer, and Electronic Equipment
circuit containing this gas is make it unusable by cutting off (WEEE).
hermetically sealed. The elec- the power cable and removing By ensuring this product is
trical switchgear has a tested the doors and shelves (if pre- disposed of correctly, you will
leakage rate of less than 0,1% sent) so that children cannot help prevent potential nega-
per year. easily climb inside and become tive consequences for the en-
trapped. vironment and human health,
DISPOSAL OF PACKAGING which could otherwise be
MATERIALS This dryer is manufactured caused by inappropriate waste
with recyclable handling of this product.
The packaging material is This symbol
100% recyclable and is marked
with the recycle symbol:
8
EN
ENERGY SAVING TIPS ly requires less energy. You will When drying cotton, for exam-
save time and energy when ple, dry Iron Dry and Cupboard
Always dry a full load, depend- running your drying cycle. Dry loads together. Start with
ing on the type of laundry and the Iron Dry programme/dry-
the programme/drying time. Always select the correct ing time setting, remove the
For more detailed information, programme/drying time for laundry to be ironed at the
see the programme chart. the load in order to obtain the end of that cycle and dry the
desired drying results. remainder of the load on the
By preference use the maxi- Cupboard Dry setting.
mum spin speed allowed by Select the ‘Gentle’ option only
your washing machine, since in case of drying small loads.
draining the water mechanical-
DECLARATION
OF CONFORMITY
This dryer has been designed,
constructed and distributed
in compliance with the safety
requirements of European
Directives:
• 2006/95/EC Low Voltage
Directive
• 2004/108/EC Electromagnetic
Compatibility Directive.
9
Use and Care guide
PRODUCT
DESCRIPTION
APPLIANCE
1.
1. Worktop
2. 2. Control panel
3.
3. Water tank
4. Door
5. 5. Door handle
6. Door filter (behind door)
7. Plinth
4. 8. Adjustable feet (4)
6.
7.
8.
CONTROL PANEL
14. 13. 12. 1. On/Off button (Reset if
long pressed)
2. Programme button
3. Settings button
4. Key lock button
5. Steam refresh button
6. Knob (Turn to select /
Press to confirm)
7. Finish in button
8. Drying / Airing time
button
9. Drying level button
10. Options button
11. Start/Pause button
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Eco monitor
13. Display
14. Programmes area
10
EN
DOOR
To open the door, pull the handle. To close the door, hold the handle and push so that
you can hear it click shut.
11
HOW TO USE
THE APPLIANCE
FIRST TIME USE
1. WHEN SWITCHING ON THE DRYER FOR THE Set the dryer to recall the last used programme
FIRST TIME, YOU WILL BE ASKED TO setting or not
Turn the knob to select one of the following settings
Set the desired language
Turn the knob until the desired language appears On: the dryer recalls the programme which you
on the display used last when switching on the appliance
12
EN
DAILY USE
Make sure that no lighters Make sure that the
or matches remain in the laundry is not soaked with
WARNING laundry. flammable liquids.
Close the door so that you can hear it click This programme position offers a choice of
shut. special programmes, which you can select by
turning the knob; the selected programme
appears on the display. Afterwards press the
3. SWITCH ON DRYER knob to confirm the desired programme.
Press the On/Off button « until the pro-
gramme button lights up. An animation Find more information regarding pro-
occurs, and there is a sound. Afterwards the grammes in section PROGRAMMES, OP-
dryer is ready to be operated. TIONS AND INDICATORS.
13
mum 180 minutes (three hours). 6. CHANGE THE SETTINGS OF A
Make sure that the Drying time button lights RUNNING PROGRAMME, IF NEEDED
up. You can still change some settings after a
programme was started:
Turn the knob to select the desired drying / • Adjust drying time (only if programme
airing time. Confirm it by pressing the knob. Drying time or Airing is selected)
• Adjust or cancel Finish in, if a delay was
Set dryness level, if needed selected and started
If you want to change the dryness level, make • Add or cancel an option, provided the
sure that the Dryness level button « lights up. progress of the programme still allows it.
Turn the knob to select the desired dryness Press the relevant button. The selected
level, afterwards press the knob to confirm. setting will blink for a few seconds.
While blinking, you can adjust the setting
Select options, if needed by turning the knob. If the value or setting
If you want to select additional options, stopped blinking, press the button again.
make sure that the Options button « lights
up. The options which are selectable for your Press the knob to confirm the modification.
programme are indicated by a lighting arrow. If you do not confirm, the modification will
be confirmed automatically — the modified
Turn the knob to select the desired options. setting will stop blinking.
The symbol of the selected option blinks. To The programme will continue automatically.
confirm it, press the knob.
To change the settings of a running
Some options / functions can be selected by programme or delay, you can also:
directly pressing the button. • press Start/Pause to put the running
programme on pause
• change your settings
• press Start/Pause again to continue the
Refer to section OPTIONS, FUNCTIONS programme.
AND INDICATORS for more information.
5. START PROGRAMME
Press and hold Start/Pause « until the button 8. SWITCH OFF THE DRYER AFTER
lights up solidly; the programme starts. PROGRAMME END
The display indicates that the cycle has
The duration can be recalculated and finished. Press On/Off button « to switch off
adapted in the course of the programme. the dryer. Open the door and take out your
During such phases, an animation occurs on laundry.
the display.
14
EN
The dryer switches off automatically in about 9. EMPTY WATER TANK / CLEAN DOOR
a quarter of an hour after programme end, to FILTER / CLEAN BOTTOM FILTER
save energy. Empty
• the water tank after each programme
If not switched off right after programme • the door filter after each programme
end, the dryer will tumble the laundry for • the bottom filter after every fifth
about 10 minutes, to prevent creasing. The programme.
display shows an animation. Refer to section CARE AND MAINTENANCE
PROGRAMMES
The dots indicate the temperature degree for dry-
ing the laundry.
Normal temperature
Reduced temperature
ECO COTTON Standard cotton programme, suitable max. load (kg): max
to dry normal wet cotton laundry. default programme
Most efficient programme in terms of duration (h): 2:10
energy consumption for drying cotton selectable options:
laundry. The values on the Energy Fresh care
Label are based on this programme.
MIXED For drying mixed laundry made of max. load (kg): 2.0
cotton, linen, artificial fibres and their default programme
blends. duration (h): 1:15
selectable options:
Steam option, Fresh
Care, Gentle
15
PROGRAMME Type of Wash Care Regulations
and Recommendations Labels
SYNTHETICS For drying laundry made of synthetic max. load (kg): 3.5
fibres. default programme
duration (h): 1:20
selectable options:
Steam option,
Dryness level, Fresh
care, Gentle
DELICATES For drying delicate laundry which max. load (kg): 2.5
needs gentle treatment. default programme
duration (h): 1:15
selectable options:
Fresh care
WOOL EXCELLENCE For drying woollens labelled with the max. load (kg): 1.0
Woolmark TOTAL EASY CARE WOOL. default programme
duration (h): 1:20
selectable options: ---
JEANS For drying cotton jeans-wear and max. load (kg): 3.0
garments made of robust jeans like default programme
material, such as trousers and jackets. duration (h): 1:50
selectable options:
Fresh care, Gentle
BIG ITEMS For drying big laundry items, such as max. load (kg): 3.0
bathmats, blankets etc. default programme
duration (h): 2:00
selectable options:
Fresh care
AIRING For airing, refreshing and loosening max. load (kg): max
up laundry for 30 minutes, without default programme
heating. duration (h): 0:15
selectable options:
Drying time, Fresh
care
16
EN
PROGRAMME Type of Wash Care Regulations
and Recommendations Labels
STEAM REFRESH For refreshing laundry with steam. max. load (kg): 1.5
Specifically designed to refresh default programme
and remove odours from dry and duration (h): 0:30
clean casual garments like shirts, selectable options:
blouses, trousers made out of cotton, ---
synthetics and their blends.
To help removing odours, use the
refreshing ball (see separate section
REFRESHING BALL).
After programme end, the garments
shall be removed immediately and
put on clothes hangers to minimize
wrinkling.
SHIRTS Gentle drying of shirts and blouses max. load (kg): 2.5
made of cotton, synthetic fibres or default programme
their blends. duration (h): 1:15
selectable options:
Fresh care, Gentle
SPORT For drying sports garments made of max. load (kg): 2.5
synthetics or cotton. default programme
duration (h): 1:15
selectable options:
Fresh care
TOWELS For drying robust laundry made of max. load (kg): 5.0
cotton, such as terry towels. default programme
duration (h): 2:00
selectable options:
Fresh care, Gentle,
Rapid
17
PROGRAMME Type of Wash Care Regulations
and Recommendations Labels
OUTDOOR For drying outdoor clothes which max. load (kg): 2.0
are appropriate for being treated in a default programme
dryer. duration (h): 1:15
selectable options:
Fresh care
DOWN JACKETS For drying big single items such as max. load (kg): 1.5
down jackets. default programme
duration (h): 1:45
selectable options:
Fresh care
MINI LOAD Economic drying of small laundry max. load (kg): 1.0
loads. default programme
duration (h): 1:00
selectable options:
Fresh care
18
EN
OPTIONS
OPTIONS WHICH ARE DIRECTLY SELECTABLE
BY PRESSING THE RESPECTIVE BUTTON
STEAM OPTION Minimizes creasing of garments made immediately after programme end
of cotton, synthetics and their blends and put them on clothes hangers.
by adding a humidifying phase at the
end of the drying cycle. The humidity level automatically
adjusts to “cupboard dry” and cannot
Use the option with small loads only, be changed with this option.
unload the garments from the dryer
DRYING TIME OPTION To adjust the desired drying time if last appears on the display.
Drying time or Airing programme has
been selected. Turn the knob to select the desired
drying time from a minimum of 10
Press the button; the light goes on, minutes up to maximum 180 minutes,
and the drying time which was used afterwards press the knob to confirm.
FRESH CARE Helps to prevent creasing if you last up to approximately 12 hours after
cannot unload the laundry soon after end of the programme.
programme end.
You can stop it at any time by
The dryer starts to tumble the laundry switching off the dryer with the On/
periodically a few minutes after Off button.
programme end. This tumbling will
19
FUNCTIONS
ON/OFF To switch the dryer on: press the To cancel a running programme:
button until the Start/Pause button press and hold the button until the
lights up. display indicates that the programme
is cancelled.
To switch the dryer off after
programme end: press the button
until the lights go off.
Turn to select
KEY LOCK This function allows you to lock the Knob and buttons are locked now.
buttons and the knob of the control The only working function is On/Off to
panel against unwanted operation, for switch the dryer off.
example by small children.
The key lock remains active also if you
The dryer must be switched on. switch off and on again the dryer.
FINISH IN Enables to have the laundry ready at a Turn the knob to select a delay up to
particular time by setting a delay until 23:30 hours. Confirm the desired delay
end of the programme. by pressing the knob.
20
EN
The colon on the display between end, that the programme has finished
hours and minutes blinks. earlier or later.
This can lead to an earlier or later Or press and hold On/Off to cancel the
programme end than originally set complete programme setting.
with the Finish in function. In that case,
the display indicates, after programme
SETTINGS The following settings can be Press and hold the Settings button
changed: for at least 3 seconds . The display
Language: to adapt the display indicates that you entered the
language Settings mode.
Key tones: to adapt the tone when
pressing a button Turn the knob to scroll through the
Cycle end alert: to adjust the tone settings. Confirm the setting which
signal at the end of the programme or you want to change by pressing the
switch it off completely knob.
Display contrast: to regulate the
contrast of the display text Turn the knob to adjust the setting;
Water conductivity: to adapt to confirm by pressing the knob.
your local water conductivity; refer
to section FIRST TIME USE for more Press the Settings button to exit. If
information. you do not press the Settings button,
Remember last used cycle: to activate the settings mode will be exited
or deactivate recall of the programme automatically after about 10 seconds.
which you used last when switching
on the dryer
Eco mode: to activate or deactivate
the automatic switch-off function
after programme end
Factory settings: to return to factory
settings
21
INDICATORS
ENERGY MONITOR The less levels of the energy monitor
are lit, the more economic is your
programme setting.
22
EN
ENERGY SAVING
AUTOMATIC SWITCH-OFF FUNCTION The dryer is designed to save energy. After the
programme has finished, it therefore switches off
automatically after about a quarter of an hour.
23
CLEANING &
MAINTENANCE
Do not use flammable fluids
WARNING to clean the dryer.
1. Hold the handle and carefully pull out the 3. Insert the water tank by pushing it back into
water tank. Hold the full water tank with both place. Make sure that it is completely inserted in the
hands. compartment.
24
EN
CLEANING THE DOOR FILTER
Clean the door filter after each programme. 3. Carefully remove the complete lint from the
Make sure that the laundry is unloaded. Open the screen by hand.
door. If needed, the screen can be cleaned also under
4.
2. Press the button to open the door filter.
Clean the filter compartment with a soft cloth,
or carefully with a vacuum cleaner.
25
CLEANING THE BOTTOM FILTER
Clean the bottom filter after every fifth programme. 4. Clean the filter foam and the filter by hand or
2. Hold the handle and pull out the bottom filter. 5. Carefully wring out the filter foam. Do not
insert it in the bottom filter dripping wet.
3. Remove the foam from the bottom filter, to 6. Fix the filter foam on the bottom filter.
clean it.
26
EN
8. Insert the bottom filter again. Make sure that it 10. Close the bottom flap.
is completely integrated in the filter compartment.
27
CLEANING THE OUTSIDE
OF THE DRYER
Use a soft damp cloth to clean the outer parts of the
dryer.
28
EN
REVERSING THE DOOR STOP
If needed, the door stop of the dryer door can be For removing and fixing the door, the help of a
reversed. Use pliers and a cross-head screwdriver for second person is recommended. Make sure that the
the procedure. dryer is unplugged. Open the dryer door.
1. Remove the two screws which are situated 3. Remove the two screws on the door hinge.
over and under the door lock, left from the door
opening.
29
5. Unscrew the bottom screw, to release the 7. Carefully turn the door frame in clockwise
cover frame on the front of the door. direction, and remove it.
30
EN
9. Remove the two side screws. Do this on both 11. Remove the side parts on each side of the
sides of the door. door.
1 2
31
13. Fix the 2 side screws on both sides of the 15. Turn the door and lay it down on the door
door again. glass.
32
EN
17. Turn the door again and lay it upside down. 19. Fix the two screws over and under the door
Fix the bottom screw again. lock, on the right side of the door opening.
33
TROUBLESHOOTING
GUIDE & AFTER-SALES
SERVICE
Your dryer is equipped with various automatic safety
functions. These enable failures to be detected in good
time and the safety system can react appropriately.
These failures are frequently so minor that they can be
removed within a few minutes.
DRYING TAKES TOO LONG Selected programme not • Select the programme
LAUNDRY IS NOT DRY optimum for type of laundry matching best the type of
ENOUGH laundry; refer to section
PROGRAMMES
DRYER DOES NOT START, Door not properly closed • Push door to close it until it
ALTHOUGH START/PAUSE HAS clicks shut
BEEN PRESSED
Key lock is activated • Press and hold the button
with the key symbol until the
display indicates that the keys
are unlocked.
34
EN
WATER DROPLETS ARE Bottom filter not inserted • Check position of the bottom
BENEATH THE DRYER correctly filter and make sure it is
completely integrated in the
filter compartment.
Water tank not inserted correctly • Push in the water tank and
make sure that it is completely
integrated in the tank
compartment.
35
FAILURE INDICATOR AND MESSAGES
Make sure to
• Empty the water tank after each programme
• Clean the door filter after each programme
• Clean the bottom filter after every fifth programme
36
EN
F01 to F04 Failure of a component Press and hold On/Off for at least
3 seconds.
F05 to F09 Failure of a component Switch off and unplug the dryer.
Immediately open the door
and take out the laundry, so
that the heat can dissipate.
Make sure that the ambient
temperature ranges between
5°C and 35°C. Wait for about an
hour. Plug in the dryer, load the
laundry and start the programme
again.
If the failure persists, call the
After-Sales Service.
F10 to F24 Failure of a component Switch off and unplug the dryer.
Wait for about half an hour.
Plug in the dryer and start the
programme again.
If the failure persists, call the
After-Sales Service.
37
TRANSPORT AND HANDLING
Never lift the dryer by
WARNING holding it at the worktop.
properly closed.
38
EN
AFTER-SALES
SERVICE
1.
BEFORE CALLING
THE AFTER-SALES SERVICE See if you can solve the problem by yourself
with the help of the suggestions given in the
TROUBLESHOOTING GUIDE.
IF AFTER THE ABOVE CHECKS THE FAILURE STILL To receive assistance, call the number shown on the
OCCURS, GET IN TOUCH WITH THE NEAREST warranty booklet or follow the instructions on the
AFTER-SALES SERVICE website www.whirlpool.eu
Always specify:
• a brief description of the failure;
• the type and exact model of the appliance;
• the service number (number after the word Service
on the rating plate on the back of the dryer).
The service number is also indicated on the
guarantee booklet;
• your full address;
• your telephone number.
Manufacturer:
Whirlpool Europe s.r.l. Socio Unico
Viale Guido Borghi 27
21025 Comerio (VA)
Italy
39
1.
2a. 2b.
40
EN
3a.
max 2 cm
max 0.79 inch
3b.
41
4.
max 100 cm
39 inch
42
EN
5. 6a.
..............
xxxx xxxx xxxx
xxx V ~ xx Hz IPX4
V
xx A D E
6b.
43
44
EN
EN
400010765918