'TIRUCHIRAPRLLT €20 014
quarry assumance
PROCEDURE FOR KEROSENE LEAK TEST
00_|12/07/36| e.S.tiarayanan |A.R Reddy
\.Raghavendron
or fesvorna) AC | EQ
JePAGED OFS
SNFOSTOT
oo ~ 1) eR:98:002/04 renuabered
fas SIPENP:0S.
T1pEditorial corrections
for clarity.SNFOSTOT PAGED OFS
22
2a
3.2
aaa
‘This procedure details out the requirements of kerosene Leak
test for single sided /- single layer wold joints that are
PRE-REQUISITES
rotary ‘wize brush to renove oily grease, elag and rust.
Wold shall be visually inspected and unacceptable defects
Ar any shail” be repaired by grinding 7 grinding and
welding.
Kerosene lesk test shall be carried out only at room
‘Te veld surface shall be applied with RERABIEH chalk (mixed
Kerosene shail be sprayed on the other sige of wea.
through crevices or cracks/
natively weld surface may be wetted with wet (soaked
Ep kerouene) cotton waste or clothe
‘Te side on which chalk Ls applied shail be visuatty examines
for Indications of Kerosene absorption (sweating/wetting)
if any shall be repaired as given below.
Leaking spots (indication) shall be marked for repair
Repairs shall be carried out by grinding and welding,
Repaixed areas shall be retested EHH.
cumin
After testing / KEEGHRIN is completed the chalk powder
ele.