Professional Documents
Culture Documents
Light Probe
Light Probe
Light Probe
09
ENGINES 272, 273 in MODEL 212
P01.00-2452-06
Remove/install
1 Remove spark plugs
Replace spark plugs AP15.10-P-1580EW
2 Turn engine at crankshaft center bolt in *001589650900
direction of engine rotation until piston of
cylinder to be checked is at bottom dead
center (BDC)
3 Connect up cylinder illumination unit (1) and
insert flexible endoscope (2) through spark
plug bore into cylinder to be checked
Checking
4 Inspect cylinder walls If condition of the cylinder barrel is not
clearly recognizable, the cylinder head must
be removed. Absolutely observe General
information for checking the cylinder barrel
before removal:
General information on inspecting cylinder AH01.00-P-0300-01VA
walls
5 Check other cylinders in the same way
6 Install in the reverse order
001 589 65 09 00
Wrench socket
© Daimler AG, 5/2/19, X/04/19, ar01.00-p-0200ews, Inspecting cylinders with a light probe Page 1 of 1
ENGINES 272, 273 in MODEL 212