Professional Documents
Culture Documents
Elect 6
Elect 6
1) Field-programmable gate arrays (FPGAs) and other array logic devices normally contain numberous flip-
flops. These flip-flops are generally o the type
a) D
b) J-K
c) S-R
d) T
2) A 3-PHASE, 60-Hz induction motor has a nameplate speed of 1600 rpm. This motor has how many poles
a) 2.0
b) 4.0
c) 6.0
d) 8.0
3) The output is to be maintained at 24 V, while the input varies from 120 V to 126 V with a load current
ranging from 0A to 5A . Assume ideal conditions, that is the keep alive current is zero and the zener
resistance RZ is negligible
6) Of the following engineering disciplines, who wold be BEST sited to desigb and operate an automobile
factory?
a) Petroleum engineer
b) Mechanical engineer
c) Civil engineer
d) Chemical engineer
7) Which of the following is a name for a set of indices and values?
a) Array
b) Stack
c) Queue
d) FIFO
8) While machine operation, the slip of the synchronous machine is
a) High
b) Low
c) Zero
d) 1
9) Scheduling periodic tasks to execute on a processor based on assigning the highest priority to the task that
has the shortest period(greatest frequency) is
a) Cyclic executive
b) Deadline monotonic
c) Earliest deadline first
d) Rate monotonic
10) The travelling crains are mostly travelled by
a) Ward leonard controlled DC shunt motor
b) AC slip ring motor
c) Synchronous motor
d) DC differentially compound motor
11) The resistance of a n electric bulb drawing 1.1 A current at 6.0 V is
a) 0.5 W
b) 5W
c) 0.2W
d) 2W
12) A 3-phase , 3-wire, ungrounded, 13.2-kv (phase-to-phase) wye-connected source is connected to a balanced
delta load that is grounded on Comer A. The voltage measured between comer band grond is most nearly
a) Half the phase-to-phase voltage
b) 7.62 kv
c) 13.2 kv
d) Cannot be determined
13) Which of the following regression models is not considered to be a linear regression model for
predicting Y in terms of X
14)
a) Phase detector
b) Phase-locked loop
c) Clock-phase skew compensator
d) Multiphase clock extractor
a) K > -2
b) -3 < k < 0
c) K< -2
d) -3 < k < 2
26) An opamp based non-inverting amplifier, the input impedance is
a) Zero
b) Infinity
c) Equal to the feedback resistance
d) Equal to the resistance connected
27) For the 4-wire RTD circuit shown, which of the following would cause the greatest measurement error in
VSENSE ?